summaryrefslogtreecommitdiff
path: root/monitor.c
AgeCommit message (Collapse)AuthorFilesLines
2009-04-07Add --with-pkgversion.pbrook1-1/+1
Allows distributors to identify their builds without needing to hack the sources. Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05Add new command line option -singlestep for tcg single stepping.aurel321-3/+20
This replaces a compile time option for some targets and adds this feature to targets which did not have a compile time option. Add monitor command to enable or disable single step mode. Modify monitor command "info status" to display single step mode. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05gdbstub: Rework configuration via command line and monitor (Jan Kiszka)aliguori1-9/+10
Introduce a more canonical gdbstub configuration (system emulation only) via the new switch '-gdb dev'. Keep '-s' as shorthand for '-gdb tcp::1234'. Use the same syntax also for the corresponding monitor command 'gdbserver'. Its default remains to listen on TCP port 1234. Changes in v4: - Rebased over new command line switches meta file Changes in v3: - Fix documentation Changes in v2: - Support for pipe-based like to gdb (target remote | qemu -gdb stdio) - Properly update the qemu-doc Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28gdbstub: Allow re-instantiation (Jan Kiszka)aliguori1-0/+2
[ Note: depends on char closing fixes ] Properly clean up the gdbstub when the user tries to re-open it (possibly under a different address). Moreover, allow to shut it down from the monitor via 'gdbserver none'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-12monitor: sync from kvm state before generating output (Jan Kiszka)aliguori1-0/+2
Ported from the KVM tree: Synchronize the qemu cpu state with kvm's before invoking various monitor info commands (like 'info registers'). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6826 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Multi-key completion for sendkeyblueswir11-0/+3
Allow completion of concatenated key strings for the sendkey command. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6784 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir11-1/+1
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Remove tabs introduced from VNC ACL seriesaliguori1-86/+86
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6727 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Support ACLs for controlling VNC access ("Daniel P. Berrange")aliguori1-0/+96
This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Introduce MONITOR_USE_READLINE flag (Jan Kiszka)aliguori1-10/+37
This allows to create monitor terminals that do not make use of the interactive readline back-end but rather send complete commands. The pass-through monitor interface of the gdbstub will be an example. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Improve mux'ed console experience (Jan Kiszka)aliguori1-5/+22
Up to now, you never really knew if you already switched the console after pressing CTRL-A C or if you mistyped it again. This patch clarifies the situation by providing a prompt in a new line and injecting a linebreak when switching away again. For this purpose, the two events CHR_EVENT_MUX_IN and CHR_EVENT_MUX_OUT are introduced and distributed on focus switches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6716 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Decouple terminals (Jan Kiszka)aliguori1-71/+75
Currently all registered (and activate) monitor terminals work in broadcast mode: Everyone sees what someone else types on some other terminal and what the monitor reports back. This model is broken when you have a management monitor terminal that is automatically operated and some other terminal used for independent guest inspection. Such additional terminals can be multiplexed device channels or a gdb frontend connected to QEMU's stub. Therefore, this patch decouples the buffers and states of all monitor terminals, allowing the user to operate them independently. It finally starts to use the 'mon' parameter that was introduced earlier with the API rework. It also defines the default monitor: the first instantance that has the MONITOR_IS_DEFAULT flag set, and that is the monitor created via the "-monitor" command line switch (or "vc" if none is given). As the patch requires to rework the monitor suspension interface, it also takes the freedom to make it "truely" suspending (so far suspending meant suppressing the prompt, but inputs were still processed). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Introduce ReadLineState (Jan Kiszka)aliguori1-17/+19
As another step towards decoupled monitor terminals encapsulate the state of the readline processor in a separate data structure called ReadLineState and adapt all interfaces appropriately. For now the monitor continues to instantiate just a single readline state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6714 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Drop banner hiding (Jan Kiszka)aliguori1-7/+3
There is no use for the hide/show banner option, and it is applied inconsistently anyway (or what makes the difference between -serial mon:stdio and -nographic for the monitor?). So drop this mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework terminal management (Jan Kiszka)aliguori1-20/+23
Remove the static MAX_MON limit by managing monitor terminals in a linked list. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6712 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori1-363/+389
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework modal password input (Jan Kiszka)aliguori1-51/+63
Currently, waiting for the user to type in some password blocks the whole VM because monitor_readline starts its own I/O loop. And this loop also screws up reading passwords from virtual console. Patch below fixes the shortcomings by using normal I/O processing also for waiting on a password. To keep to modal property for the monitor terminal, the command handler is temporarily replaced by a password handler and a callback infrastructure is established to process the result before switching back to command mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Break out readline_show_prompt (Jan Kiszka)aliguori1-0/+2
Break readline_show_prompt out of readline_start so that (re-)printing the prompt can be controlled in a more fine-grained way. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Simplify password input mode (Jan Kiszka)aliguori1-20/+0
Drop the hack to query passwords on all monitor terminals now that they are requested when the user initially enters 'continue'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6708 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework early disk password inquiry (Jan Kiszka)aliguori1-4/+40
Reading the passwords for encrypted hard disks during early startup is broken (I guess for quiet a while now): - No monitor terminal is ready for input at this point - Forcing all mux'ed terminals into monitor mode can confuse other users of that channels To overcome these issues and to lay the ground for a clean decoupling of monitor terminals, this patch changes the initial password inquiry as follows: - Prevent autostart if there is some encrypted disk - Once the user tries to resume the VM, prompt for all missing passwords - Only resume if all passwords were accepted Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05block: Improve bdrv_iterate (Jan Kiszka)aliguori1-1/+2
Make bdrv_iterate more useful by passing the BlockDriverState to the iterator instead of the device name. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6703 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03SH4: Added monitoring of TLBsaurel321-1/+32
This patch might interest some people trying (as I try to do) to fix some tlbs for kernel/user space data sharing. Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6670 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)aliguori1-0/+14
Add monitor command to hot-add PCI devices (nic and storage). Syntax is: pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params It returns the domain, bus and slot for the newly added device on success. It is possible to attach a disk to a device after PCI initialization via the drive_add command. If so, a manual scan of the SCSI bus on the guest is necessary. Save QEMUMachine necessary for drive_init. Add monitor command to hot-remove devices, remove device data on _EJ0 notification. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11Add a description for the set_link monitor command.aliguori1-1/+2
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6591 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05toplevel: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori1-4/+0
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24Synch code, help and docsblueswir11-5/+7
Rearrange code, help printout and docs so that they are in the same (hopefully more logical) order for easier maintenance. Add help and docs for undocumented options. Reformat slightly for more consistent help output. Add comments to encourage better synchronization in the future. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6432 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add 'set_link' monitor command (Mark McLoughlin)aliguori1-0/+1
Add a monitor command to setting a given network device's link status to 'up' or 'down'. Allows simulation of network cable disconnect. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6247 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-28Fix -Werror=format-security warning (Frederik Himpe/Lennert Buytenhek)blueswir11-3/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6134 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18new monitor func statusaurel321-0/+11
Attached is a small patch that adds the new info subcommand - status. The status indicates if the VM is running or paused this info makes life for (stateless) Qemu/KVM frontends easier. (Philipp Wehrheim) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6094 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-18Fix warnings introduced by commit 6081aurel321-0/+2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6084 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-17Add HPET emulation to qemu (Beth Kon)aliguori1-0/+7
This patch adds HPET emulation. It can be disabled with -disable-hpet. An hpet provides a more finely granular clocksource than otherwise available on PC. This means that latency-dependent applications (e.g. multimedia) will generally be smoother when using the HPET. Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6081 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-10Accept password as an argument to 'change vnc password' monitor command ↵aliguori1-5/+9
(Chris Webb) This allows easier use of the change vnc password monitor command from management scripts, without having to implement expect(1)-like behaviour. Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5967 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-10Fix off-by-one bug limiting VNC passwords to 7 chars (Chris Webb)aliguori1-2/+1
monitor_readline expects buf_size to include the terminating \0, but do_change_vnc in monitor.c calls it as though it doesn't. The other site where monitor_readline reads a password (in vl.c) passes the buffer length correctly. Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5966 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-04Add virtio-balloon supportaliguori1-1/+3
This adds a VirtIO based balloon driver. It uses madvise() to actually balloon the memory when possible. Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the kernel actually supports it when using KVM. It's always safe when using TCG. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-04Add ballooning infrastructure.aliguori1-0/+22
Balloon devices allow you to ask the guest to allocate memory. This allows you to release that memory. It's mostly useful for freeing up large chunks of memory from cooperative guests. Ballooning is supported by both Xen and VirtIO. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5873 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-16Attached patch fixes a series of this warningblueswir11-19/+19
when compiling on NetBSD: warning: array subscript has type 'char' Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-05Add KVM support to QEMUaliguori1-0/+16
This patch adds very basic KVM support. KVM is a kernel module for Linux that allows userspace programs to make use of hardware virtualization support. It current supports x86 hardware virtualization using Intel VT-x or AMD-V. It also supports IA64 VT-i, PPC 440, and S390. This patch only implements the bare minimum support to get a guest booting. It has very little impact the rest of QEMU and attempts to integrate nicely with the rest of QEMU. Even though this implementation is basic, it is significantly faster than TCG. Booting and shutting down a Linux guest: w/TCG: 1:32.36 elapsed 84% CPU w/KVM: 0:31.14 elapsed 59% CPU Right now, KVM is disabled by default and must be explicitly enabled with -enable-kvm. We can enable it by default later when we have had better testing. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Implement "info chardev" command. (Gerd Hoffmann)aliguori1-0/+2
This patch makes qemu keep track of the character devices in use and implements a "info chardev" monitor command to print a list. qemu_chr_open() sticks the devices into a linked list now. It got a new argument (label), so there is a name for each device. It also assigns a filename to each character device. By default it just copyes the filename passed in. Individual drivers can fill in something else though. qemu_chr_open_pty() sets the filename to name of the pseudo tty allocated. Output looks like this: (qemu) info chardev monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait serial0: filename=unix:/tmp/run.sh-26827/console,server serial1: filename=pty:/dev/pts/5 parallel0: filename=vc:640x480 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-26Fix undeclared symbol warnings from sparseblueswir11-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5539 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-21target-ppc: Convert XER accesses to TCGaurel321-1/+1
Define XER bits as a single register and access them individually to avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit registers). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-13Introduce UI for live migrationaliguori1-0/+8
This patch introduces a command line parameter and monitor command for starting a live migration. The next patch will provide an example of how to use these parameters. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-06Allow the monitor to be suspended during non-blocking opaliguori1-1/+18
Live migration happens in the background, but it is useful to make the monitor command appear as if it's blocking. This allows a management tool to immediately know when the live migration has completed without having to poll the migration status. This patch allows the monitor to be suspended from a monitor callback which will prevent new monitor commands from being executed. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5431 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-05Move wav_start_capture prototype to avoid a warning with -Wmissing-prototypesblueswir11-3/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5423 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-02Make monitor command tables constblueswir11-22/+22
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5399 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-01monitor: add sendkey support for comma, dot and slashaurel321-0/+3
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5384 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-01fix default size handling in monitoraurel321-1/+1
If /i format is used once (with x/xp/p command) default_fmt_size is set to -1 and subsequent commands of the form /x outputs nothing. Included patched fixes this by setting default_fmt_size only if the command is not of format /i. Signed-off-by: Gleb Natapov <gleb@qumranet.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5381 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-18Add "info uuid" command to monitor (Gleb Natapov)blueswir11-0/+11
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5258 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-16Move offsetof to osdep.h, remove local defintions.balrog1-4/+0
With this container_of can actually be used without causing build errors. Reformat container_of. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5234 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-30Fix some warnings that would be generated by gcc -Wredundant-declsblueswir11-2/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5115 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21Fix OpenBSD linker warningsblueswir11-4/+6
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5044 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 12:38:29 +0000