summaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)AuthorFilesLines
2011-11-02xtensa_lx60: add FLASH supportMax Filippov2-0/+2
LX60 carry 4 Mbyte FLASH and 128 Kbyte SRAM, LX200 carry 16 Mbyte FLASH and 32 Mbyte SRAM. Either of these memories may be mapped to the system ROM region. Select boot from FLASH if -kernel option is not specified, otherwise boot from SRAM. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2011-10-16i8259: Move to hw libraryJan Kiszka10-0/+10
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16target-xtensa: add Avnet LX60/LX110/LX200 boardsMax Filippov2-0/+6
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60, 96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550 UART. FPGA may be loaded with almost any Tensilica processor. It is also used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC and LED/DIP switches access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-08target-alpha: Add CLIPPER emulation.Richard Henderson1-0/+2
This is a DP264 variant, SMP capable, no unusual hardware present. The emulation does not currently include any PCI IOMMU code. Hopefully the generic support for that can be merged to HEAD soon. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-09-10target-xtensa: add target to the configure scriptMax Filippov2-0/+2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl4-0/+4
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-31target-alpha: Enable the alpha-softmmu target.Richard Henderson1-0/+9
With all of the pre-existing code that would not compile gone, this is the earliest point at which the target can be enabled. There is no machine defined yet, so this will crash on startup. Enable the target anyway, to make sure that further compilation problems do not creep back in. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-05-26usb: add ehci adapterGerd Hoffmann1-0/+1
This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-20s390x: build s390x by defaultAlexander Graf1-0/+1
This patch enables building of s390x-softmmu and s390x-linux-user targets by default. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-12unicore32: necessary modifications for other files to support unicore32Guan Xuetao1-0/+1
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-04lm32: add support for the Milkymist boardMichael Walle1-0/+1
This patch adds almost complete support for the Milkymist system-on-chip (http://www.milkymist.org). Additional to running bare metal applications, booting a linux kernel with initrd is supported. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-04lm32: add Milkymist memory card supportMichael Walle1-0/+1
This patch adds support for Milkymist's memory card core. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-22vmmouse: Fix typo preventing x86-64 buildJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-16microblaze: Compile uart 16550 serial driverMichal Simek2-0/+2
Upcomming little endian platform will use 16550 serial driver. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-03-07lm32: EVR32 and uclinux BSPMichael Walle1-0/+4
This patch adds support for the following two BSPs: - LM32 EVR32 BSP (as used by RTEMS) - uclinux BSP by Theobroma Systems Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-01microblaze: Correct copy+paste:o in defconfigsEdgar E. Iglesias2-2/+2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-02-23microblaze: Allow targeting little-endian mbEdgar E. Iglesias2-0/+5
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2011-02-20applesmc: make optionalBlue Swirl2-0/+2
Based on patch by David Ahern. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12hpet: make optionalBlue Swirl2-0/+2
Ignore failure with hpet device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12x86: make vmmouse optionalBlue Swirl2-0/+2
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be created. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-17config: add ahci for pci capable machinesAlexander Graf1-0/+1
This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17config: move ide core and pci to pci.makAlexander Graf14-33/+3
Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-27Split out common pcnet codePaul Brook2-0/+2
The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Remove PCI from sparc32 targetPaul Brook1-1/+0
None of the (current) sparc32 machines have a PCI bus, so remove the PCI code from these configs. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27Fix previous commitPaul Brook3-2/+12
Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27VirtIO config optionPaul Brook1-0/+1
Make virtio devices optional. Selecting individual devices is not useful as the host bindings are all in one file. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27PCI config includePaul Brook17-31/+16
Split PCI config options into a separate file Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-09-30powerpc: Add a virtex5 ml507 refdesign boardEdgar E. Iglesias3-0/+6
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-07-03piix4: compile only onceBlue Swirl4-0/+4
Compile piix4 in hwlib. Two compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-29MIPS: Initial support of VIA IDE controller used by fulong mini pcHuacai Chen1-0/+1
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of bonito north bridge used by fulong mini pcHuacai Chen1-0/+1
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22Compile dma only onceBlue Swirl9-0/+9
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl10-0/+10
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-17Compile acpi_piix4, apm and pm_smbus only onceBlue Swirl6-0/+6
12 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18sparc32 use empty_slot for missing RAM v1Artyom Tarasenko1-0/+1
use empty_slot device for the RAM which is not installed Models without ECC don't trap when missing ram is accessed. v0->v1 compile only once and fix indentation Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-13sh_pci: fix memory and I/O accessAurelien Jarno2-0/+2
Since commit 8da3ff180974732fc4272cb4433fef85c1822961 ("MMIO callback interface changes"), the addresses passed to the I/O functions are an offset to the start of the area. As a consequence, there is no need to correct the address using the value of IOBR. This make possible the use of the default MMIO functions. Moreover the addresses are now remaped when the value if IOBR change. The memory area corresponds to the devices behing the PCI bus, it should not be mapped by the PCI controller. Remove the corresponding code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-11hw/r2d: add flash memoryAurelien Jarno2-0/+2
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-05OHCI qdev conversionPaul Brook1-1/+0
Convert remaining OHCI devices to QDEV interface. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-30Compile most PPC devices only onceBlue Swirl3-0/+30
Make byte swapping unconditional since PPC is big endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile prep_pci only onceBlue Swirl3-0/+3
Make byte swapping unconditional since PPC is big endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile openpic only onceBlue Swirl3-0/+3
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional since PPC is big endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile ide/macio only onceBlue Swirl3-0/+3
Replace TARGET_PAGE_SIZE with 4096. Make byte swapping unconditional since PPC is big endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile pflash_cfi01 only onceBlue Swirl6-0/+6
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile pflash_cfi02 only onceBlue Swirl5-0/+5
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile acpi only onceBlue Swirl6-0/+6
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile vmware_vga only onceBlue Swirl6-0/+6
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile some MIPS devices only onceBlue Swirl4-0/+20
Move CPU specific declarations to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile ide/core only onceBlue Swirl13-0/+13
Make win2k install hack unconditional as it is still restricted to x86 only in vl.c. Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-26target-s390: Don't compile in virtio-pciAlexander Graf17-0/+17
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic gets confused and tries to give us PCI devices instead of S390 virtio devices. Since we don't have PCI on S390, we can safely not compile virtio-pci at all. In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I enabled for every platform except S390. Thanks to this the change should be a complete nop for every other platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-22Compile sound devices only onceBlue Swirl9-0/+11
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 17:13:21 +0000