summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-10Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori537-1780/+1808
* bonzini/hw-dirs: sh: move files referencing CPU to hw/sh4/ ppc: move more files to hw/ppc ppc: move files referencing CPU to hw/ppc/ m68k: move files referencing CPU to hw/m68k/ i386: move files referencing CPU to hw/i386/ arm: move files referencing CPU to hw/arm/ hw: move boards and other isolated files to hw/ARCH ppc: express FDT dependency of pSeries and e500 boards via default-configs/ build: always link device_tree.o into emulators if libfdt available hw: include hw header files with full paths ppc: do not use ../ in include files vt82c686: vt82c686 is not a PCI host bridge virtio-9p: remove PCI dependencies from hw/9pfs/ virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX hw: move device-hotplug.o to toplevel, compile it once hw: move qdev-monitor.o to toplevel directory hw: move fifo.[ch] to libqemuutil hw: move char backends to backends/ Conflicts: backends/baum.c backends/msmouse.c hw/a15mpcore.c hw/arm/Makefile.objs hw/arm/pic_cpu.c hw/dataplane/event-poll.c hw/dataplane/virtio-blk.c include/char/baum.h include/char/msmouse.h qemu-char.c vl.c Resolve conflicts caused by header movements. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-10Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori9-27/+9
# By Lei Li (2) and others # Via Stefan Hajnoczi * stefanha/trivial-patches: Fix the wrong description in qemu manual pci_host: Drop write-only address_space field rng-random: Use qemu_open / qemu_close configure: Require at least spice-protocol-0.12.3 osdep: replace setsockopt by qemu_setsockopt lm32: remove unused function rtc-test: Fix test failures with recent glib configure: Create link to icon bitmap for out-of-tree builds
2013-03-10Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori5-144/+331
# By Paolo Bonzini (4) and Peter Lieven (2) # Via Paolo Bonzini * bonzini/scsi-next: scsi-disk: handle io_canceled uniformly and correctly scsi-disk: do not complete canceled UNMAP requests scsi: do not call scsi_read_data/scsi_write_data for a canceled request iscsi: look for pkg-config file too iscsi: add iscsi_truncate support iscsi: retry read, write, flush and unmap on unit attention check conditions
2013-03-10qemu-char: fix win32 buildBlue Swirl1-2/+4
96c6384776d631839a9c8fe02bf135f9ba22586c did not adjust Win32 #ifdeffery properly, breaking build in later commits. Fix. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Message-id: 0ba5565b1ed44380c57d4a5fab86e9549f581ebf.1362822910.git.blauwirbel@gmail.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-10baum: fix buildBlue Swirl1-1/+0
08744c98115cfa144ed3493556024e400b2e2573 removed hw/baum.h but did not adjust hw/baum.c, breaking build. Fix. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Message-id: c50406bda98f8b277e8b9004a0012fa5e5c124d0.1362822910.git.blauwirbel@gmail.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08virtio-serial: make flow control explicit in virtio-consoleAmit Shah2-26/+10
virtio-console.c used to return a value less than the number of bytes asked to be written out to a chardev backend in case the backend is not writable. virtio-serial-bus.c then implicitly enabled flow control for that port. Make this explicit instead. Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: f5ec50b068c25422256e499cf4adc06d353bf394.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08virtio: console: add flow controlAmit Shah1-0/+13
The virtio-serial-bus already has the logic to make flow control work properly. Hook into the char layer's new ability to signal a backend is writable again. Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: abffa02235d55ca6e2489068c58971c8897e976c.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08serial: add flow control to transmitAnthony Liguori2-19/+11
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 2976f10d4e66ed4a34011f6f0d6937026d22be5f.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: move text console init to console.cAnthony Liguori2-1/+7
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 17cefde0a8d7807294bab95e93c3328a20d3f2ed.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: move msmouse registeration to msmouse.cAnthony Liguori3-11/+9
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: b47d1153b0d7669743c9a6bb98ce30f4cf7f876b.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: move baum registration to baum.cAnthony Liguori4-36/+8
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 1b24baa1ec3a174d5cad31e079d829904b53077b.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: move spice registration to spice-qemu-char.cAnthony Liguori2-6/+10
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 49a8d12eeb117e5530b2fab02af7681b54f9245c.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: make char drivers dynamically registerableAnthony Liguori2-44/+68
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 0ff4f5f2b8b7afdb85a0c241403ad73f472f0b81.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: remove use of QEMUTimer in favor of glib idle functionAnthony Liguori2-8/+6
qemu-char is now independent of the QEMU main loop. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 3cda0bbcfb94912df8a767983a52bb71a4a3231d.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: use a glib timeout instead of qemu-timerAnthony Liguori1-23/+45
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 05a883ce5a98275b976bf0124610599859c2b7da.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08char: add gio watch fn for tcp backendsAmit Shah1-0/+7
Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: b50e668c4f4146a654c5d4412440eb9e589f2c02.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: add pty watchAnthony Liguori1-0/+7
This lets ptys support adding front end watchs. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 23380f37b22d407ba0b9e080f6ea0d66b279f2d2.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: add watch supportAnthony Liguori2-1/+35
This allows a front-end to request for a callback when the backend is writable again. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 96f93c0f741064604bbb6389ce962191120af8b7.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: tcp: make use GIOChannelAnthony Liguori1-18/+42
I didn't bother switching to g_io_channel_read/write because we need to use sendmsg on Unix. No problem though since we're using an unbuffered channel. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 002f726576dfb51bca4854aa257b74d77c1cd4e8.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: convert UDP to GIOChannelAnthony Liguori1-11/+57
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 775a2bd666a3d1fa008656bf97191b7573c6ffb5.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: convert pty to GIOChannelAnthony Liguori1-17/+27
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 339eebf3c59a450b0354056e9ac4b41f67230831.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: convert fd_chr to use a GIOChannelAnthony Liguori1-41/+62
This uses the newly introduced IOWatchPoll source. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 0cb5d14510ee835a0ebc23676d10a2cce9280da5.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08char: add IOWatchPoll supportAnthony Liguori1-0/+140
This is a special GSource that supports CharDriverState style poll callbacks. For reviewability and bisectability, this code is #if 0'd out in this patch to avoid unused warnings since all of the functions are static. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 9b59ac17b9d0bb3972a73fed04d415f07b391936.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08qemu-char: remove dead/confusing logic with nb_stdio_clientsAnthony Liguori1-106/+30
This code is very old dating back to 2007. What is puzzling is that STDIO_MAX_CLIENTS was always #define to 1 meaning that all of the code to deal with more than one client was unreachable. Just remove the whole mess of it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: d276bccdbf4e7463020c5f539f61ae3bfbc88d1d.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08char-socket: fix error reportingAnthony Liguori1-0/+4
Right now the inet connect code tries all available addresses but until one doesn't fail. It passes local_err each time without clearing it from the previous failure. This can trigger an assert since the inet connect code tries to set an error on an object != NULL. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Message-id: 16c806d60aa5e9660ed7751bb4e37dcd278f97f0.1362505276.git.amit.shah@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08Fix the wrong description in qemu manualLei Li1-1/+1
Fix LP#1151450 the wrong description in qemu manual: 'qemu-system-x86_84' should be 'qemu-system-x86_64'. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08pci_host: Drop write-only address_space fieldPeter Maydell3-3/+0
The address_space field of PCIHostState was only ever written, never used. Drop it completely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08rng-random: Use qemu_open / qemu_closeStefan Berger1-2/+2
In the rng backend use qemu_open and qemu_close rather than POSIX open/close. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08configure: Require at least spice-protocol-0.12.3Michal Privoznik1-1/+1
As of 5a49d3e9 we assume SPICE_PORT_EVENT_BREAK to be defined. However, it is defined not in 0.12.2 what we require now, but in 0.12.3. Therefore in order to prevent build failure we must adjust our minimal requirements. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08osdep: replace setsockopt by qemu_setsockoptLei Li1-2/+2
Fix the compiler warning when cross build qemu-ga for windows by using qemu_setsockopt() instead of setsockopt(). util/osdep.c: In function 'socket_set_nodelay': util/osdep.c:69:5: warning: passing argument 4 of 'setsockopt' from incompatible pointer type [enabled by default] In file included from /home/lei/qemu_b/include/sysemu/os-win32.h:30:0, from /home/lei/qemu_b/include/qemu-common.h:46, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:990:63: note: expected 'const char *' but argument is of type 'int *' Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08lm32: remove unused functionPaolo Bonzini1-16/+0
The milkymist-minimac device in fact does not exist at all. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08rtc-test: Fix test failures with recent glibCole Robinson1-2/+2
As of glib 2.35.4, glib changed its logic for ordering test cases: https://bugzilla.gnome.org/show_bug.cgi?id=694487 This was causing failures in rtc-test. Group the reordered test cases into their own suite, which maintains the original ordering. CC: qemu-stable@nongnu.org Signed-off-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-08configure: Create link to icon bitmap for out-of-tree buildsJan Kiszka1-0/+1
This allows to pick up the icon when starting QEMU directly from an out-of-tree build directory. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-07hw/nand.c: correct the sense of the BUSY/READY status bitKuo-Jung Su1-1/+2
The BIT6 of Status Register(SR): SR[6] behaves the same as R/B# pin SR[6] = 0 indicates the device is busy; SR[6] = 1 means the device is ready Some NAND flash controller (i.e. ftnandc021) relies on the SR[6] to determine if the NAND flash erase/program is success or error timeout. P.S: The exmaple NAND flash datasheet could be found at following link: http://www.mxic.com.tw/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/8FEA549237D2F7674825795800104C26/$File/MX30LF1G08AA,%203V,%201Gb,%20v1.1.pdf Signed-off-by: Kuo-Jung Su <dantesu@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2013-03-05scsi-disk: handle io_canceled uniformly and correctlyPaolo Bonzini1-4/+21
Always check it immediately after calling bdrv_acct_done, and always do a "goto done" in case the "done" label has to free some memory---as is the case for scsi_unmap_complete in the previous patch. This patch could fix problems that happen when a request is split into multiple parts, and one of them is canceled. Then the next part is fired, but the HBA's cancellation callbacks have fired already. Whether this happens or not, depends on how the block/ driver implements AIO cancellation. It it does a simple bdrv_drain_all() or similar, then it will not have a problem. If it only cancels the given AIOCB, this scenario could happen. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05scsi-disk: do not complete canceled UNMAP requestsPaolo Bonzini1-4/+7
Canceled requests should never be completed, and doing that could cause accesses to a NULL hba_private field. Cc: qemu-stable@nongnu.org Reported-by: Stefan Priebe <s.priebe@profihost.ag> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05scsi: do not call scsi_read_data/scsi_write_data for a canceled requestPaolo Bonzini2-0/+5
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05iscsi: look for pkg-config file tooPaolo Bonzini1-1/+7
Due to library conflicts, Fedora will have to put libiscsi in /usr/lib/iscsi. Simplify configuration by using a pkg-config file. The Fedora package will distribute one, and the patch to add it has been sent to upstream libiscsi as well. Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05iscsi: add iscsi_truncate supportPeter Lieven1-47/+88
this patch adds iscsi_truncate which effectively allows for online resizing of iscsi volumes. for this to work you have to resize the volume on your storage and then call block_resize command in qemu which will issue a readcapacity16 to update the capacity. v4: - factor out complete readcapacity logic into a separate function - handle capacity change check condition in readcapacity function (this happens if the block_resize cmd is the first iscsi task executed after a resize on the storage) v3: - remove switch statement in iscsi_open - create separate patch for brdv_drain_all() in bdrv_truncate() v2: - add a general bdrv_drain_all() before bdrv_truncate() to avoid in-flight AIOs while the device is truncated - since no AIOs are in flight we can use a sync libiscsi call to re-read the capacity - factor out the readcapacity16 logic as it is redundant to iscsi_open() and iscsi_truncate(). Signed-off-by: Peter Lieven <pl@kamp.de> [allow any type of unit attention check condition in iscsi_readcapacity_sync(), as in Message-ID: <51263A2A.6070304@dlhnet.de> - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05iscsi: retry read, write, flush and unmap on unit attention check conditionsPeter Lieven1-88/+203
the storage might return a check condition status for various reasons. (e.g. bus reset, capacity change, thin-provisioning info etc.) currently all these informative status responses lead to an I/O error which is populated to the guest. this patch introduces a retry mechanism to avoid this. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-05Merge branch 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-armAurelien Jarno21-108/+1064
* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm: MAINTAINERS: add entry for ARM KVM guest cores configure: Enable KVM on ARM hw/kvm/arm_gic: Implement support for KVM in-kernel ARM GIC target-arm: Use MemoryListener to identify GIC base address for KVM hw/arm_gic: Convert ARM GIC classes to use init/realize hw/arm_gic: Add presave/postload hooks ARM KVM: save and load VFP registers from kernel ARM: KVM: Add support for KVM on ARM architecture target-arm: Drop CPUARMState* argument from bank_number() linux-headers: resync from mainline to add ARM KVM headers oslib-posix: Align to permit transparent hugepages on ARM Linux target-arm: Don't decode RFE or SRS on M profile cores target-arm: Factor out handling of SRS instruction
2013-03-05mipsn32-linux-user: Configure the architecture properlyRichard Henderson7-1122/+628
N32 is a 64-bit cpu with a 32-bit address space. We have existing cpp defines for this situation, but weren't using them. This does mean that the linux-user/mipsn32 directory must be merged with the linux-user/mips64 directory, and differences must be resolved via ifdefs. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips64-linux-user: Enable 64-bit address mode and fpuRichard Henderson1-0/+12
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Fix n32 and n64 syscallsRichard Henderson1-7/+18
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Save and restore fpu and dsp from sigcontextRichard Henderson3-118/+58
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Enable mips64 and mipsn32 linux-user targetsRichard Henderson1-0/+4
At this point we can enable compilation, though things still don't work. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Share o32 code for n32 and n64 signalsRichard Henderson1-1/+29
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Delete n32 and n64 signal stubsRichard Henderson1-58/+0
Deleting these first makes the next patch much easier to read. This doesn't cause any sort of compilation failure because we have not yet enabled n32/n64 compilation. This is dead code. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05MAINTAINERS: add entry for ARM KVM guest coresPeter Maydell1-0/+5
Add an entry indicating maintainer status for the ARM KVM code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-05configure: Enable KVM on ARMPeter Maydell1-1/+1
Enable KVM on ARM hosts, now that all the necessary components for it exist. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:39:01 +0000