usb: cancel async packets on unplug

This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed.  The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 25 insertions, 1 deletions

diff --git a/hw/usb-uhci.c b/hw/usb-uhci.c
index c0de05b4f..8f504d11d 100644
--- a/hw/usb-uhci.c
+++ b/hw/usb-uhci.c
@@ -234,6 +234,19 @@ static void uhci_async_validate_end(UHCIState *s)
     }
 }
 
+static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev)
+{
+    UHCIAsync *curr, *n;
+
+    QTAILQ_FOREACH_SAFE(curr, &s->async_pending, next, n) {
+        if (curr->packet.owner != dev) {
+            continue;
+        }
+        uhci_async_unlink(s, curr);
+        uhci_async_cancel(s, curr);
+    }
+}
+
 static void uhci_async_cancel_all(UHCIState *s)
 {
     UHCIAsync *curr, *n;
@@ -1081,6 +1094,13 @@ static void uhci_map(PCIDevice *pci_dev, int region_num,
     register_ioport_read(addr, 32, 1, uhci_ioport_readb, s);
 }
 
+static void uhci_device_destroy(USBBus *bus, USBDevice *dev)
+{
+    UHCIState *s = container_of(bus, UHCIState, bus);
+
+    uhci_async_cancel_device(s, dev);
+}
+
 static USBPortOps uhci_port_ops = {
     .attach = uhci_attach,
     .detach = uhci_detach,
@@ -1088,6 +1108,10 @@ static USBPortOps uhci_port_ops = {
     .complete = uhci_async_complete,
 };
 
+static USBBusOps uhci_bus_ops = {
+    .device_destroy = uhci_device_destroy,
+};
+
 static int usb_uhci_common_initfn(UHCIState *s)
 {
     uint8_t *pci_conf = s->dev.config;
@@ -1100,7 +1124,7 @@ static int usb_uhci_common_initfn(UHCIState *s)
     pci_conf[PCI_INTERRUPT_PIN] = 4; // interrupt pin 3
     pci_conf[0x60] = 0x10; // release number
 
-    usb_bus_new(&s->bus, &s->dev.qdev);
+    usb_bus_new(&s->bus, &uhci_bus_ops, &s->dev.qdev);
     for(i = 0; i < NB_PORTS; i++) {
         usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops,
                           USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);