summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2012-05-17isci: Terminate outstanding TCs on TX/RX RNC suspensions.Jeff Skirvin7-32/+188
TCs must only be terminated when RNCs are suspended. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: Handle all suspending TC completionsJeff Skirvin7-87/+242
Add comprehensive decode for all TC completions that generate RNC suspensions. Note that this commit also removes unconditional resumptions of ATAPI devices when in the SCI_STP_DEV_ATAPI_ERROR state, and STP devices when in the SCI_STP_DEV_IDLE state. This is because the SCI_STP_DEV_IDLE and SCI_STP_DEV_ATAPI state entry functions manage the RNC resumption. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: Fixed bug in resumption from RNC Tx/Rx suspend state.Jeff Skirvin1-5/+7
The resumption from the Tx/Rx suspended state should work the same as the Tx suspended state. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: Manage the link layer hang detect timer for RNC suspensions.Jeff Skirvin4-2/+51
For STP devices under certain protocol conditions, an RNC will not suspend until the current transfer state is broken with a SYNC/ESC sequence from the SCU. The SYNC/ESC driven by expiration of the SCU link layer hang detect timer, which has too small a dynamic range to support slow SATA devices, so normally it is disabled. This change enables the timer with the minimum period at the point when the suspension is requested. Note that there is potential collateral damage to other open connections to slow SATA devices on the same port, since there is no alternative but to enable the LLHANG timer on every phy in the port for the current suspension request - there is no way to tell on which phy the RNC in question is currently active. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: fix oem parameter validation on single controller skusDan Williams1-1/+1
OEM parameters [1] are parsed from the platform option-rom / efi driver. By default the driver was validating the parameters for the dual-controller case, but in single-controller case only the first set of parameters may be valid. Limit the validation to the number of actual controllers detected otherwise the driver may fail to parse the valid parameters leading to driver-load or runtime failures. [1] the platform specific set of phy address, configuration,and analog tuning values [stable v3.0+] Cc: <stable@vger.kernel.org> Reported-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: enable BCN in sci_port_add_phy()Maciej Trela1-0/+2
Ensure we enable receiving BCN's from the hardware when adding phy to isci_port. Otherwise if we get BCN before the port is created we won't see any BCN Signed-off-by: Maciej Trela <maciej.trela@intel.com> Reported-by: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: Changes in COMSAS timings enabling ISCI to detect buggy disc drives.Andrzej Jakowski2-0/+63
This patch extends timings in COMSAS signaling, so ISCI can detect disc drives having issues to send COMSAS in correct time frame. Signed-off-by: Andrzej Jakowski <andrzej.jakowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: kill isci_host.shostDan Williams2-10/+12
We can retrieve the shost from the sas_ha like the rest of libsas and drop this out of our local data structure. Acked-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: fix interrupt disableDan Williams2-13/+27
There is a (dubious?) lost irq workaround in sci_controller_isr() that effectively nullifies attempts to disable interrupts. Until the workaround can be re-evaluated add some infrastructure to prevent the interrupt handler from inadvertantly re-enabling interrupts. The failure mode was interrupts continuing to run after the driver had been removed and its iomappings torn down. Reported-by: Jacek Danecki <jacek.danecki@intel.com> Tested-by: Jacek Danecki <jacek.danecki@intel.com> [richard: clear remaining interrupts at the end of reset] Acked-by: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: fix 'link-up' events occur after 'start-complete'Dan Williams3-38/+50
The call to wait_for_start() is meant to ensure that all links have been given a chance to come up before letting the kernel proceed with probing. However, the implementation is not correctly syncing with the port configuration agent. In the MPC case the ports are hard-coded, in the APC case we need to wait for the port-configuration to form ports from the started phys. Towards that end increase the timeout for the APC agent to form ports, and delay start complete until all phys are out of link-training. Cc: <stable@vger.kernel.org> Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: fix controller stopDan Williams2-52/+55
1/ notify waiters when controller stop completes (fixes 10 second stall unloading the driver) 2/ make sure phy stop is after port and device stop Cc: Richard Boyd <richard.g.boyd@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: refactor initialization for S3/S4Dan Williams8-360/+277
Based on an original implementation by Ed Nadolski and Artur Wojcik In preparation for S3/S4 support refactor initialization so that driver-load and resume-from-suspend can share the common init path of isci_host_init(). Organize the initialization into objects that are self-contained to the driver (initialized by isci_host_init) versus those that have some upward registration (initialized at allocation time asd_sas_phy, asd_sas_port, dma allocations). The largest change is moving the the validation of the oem and module parameters from isci_host_init() to isci_host_alloc(). The S3/S4 approach being taken is that libsas will be tasked with remembering the state of the domain and the lldd is free to be forgetful. In the case of isci we'll just re-init using a subset of the normal driver load path. [clean up some unused / mis-indented function definitions in host.h] Signed-off-by: Ed Nadolski <edmund.nadolski@intel.com> Signed-off-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: kill isci_port.domain_dev_listDan Williams3-15/+6
Another unused field, and isci_port_init is overkill. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: kill ->status, and ->state_lock in isci_hostDan Williams2-34/+0
They serve no incremental purpose over the existing sas_ha state. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: Don't filter BROADCAST CHANGE primitivesTom Jackson1-0/+7
Per the SAS spec, several types of BROADCAST CHANGE primitives must cause re-discovery of the originating expander. Only the standard BROADCAST CHANGE primitive was being sent to the LIBSAS layer. The other BC primitives have been added to the sci_phy_event_handler() Signed-off-by: Tom Jackson <thomas.p.jackson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: kill sci_phy_protocol and sci_request_protocolDan Williams6-37/+21
Holdovers from the initial driver cleanup, replace with enum sas_protocol. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: kill ->is_direct_attachedDan Williams5-49/+17
domain_device ->parent conveys the same information. Occurrences of ->is_direct_attached appear next to incomplete open-coded versions of dev_is_sata(), clean those up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17isci: improve 'invalid state' warningsDan Williams2-30/+36
Convert controller state machine warnings to emit the state number (it missed the number to string conversion, but since these error rarely happen not much motivation to go further). Fix up the rnc warnings to use the state name. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-05-17[SCSI] lpfc 8.3.31: Update lpfc to version 8.3.31James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fixed system crash due to not providing SCSI ↵James Smart2-4/+44
error-handling host reset handler Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver using the wrong xritag when sending ↵James Smart2-1/+8
an els echo Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Debug helper utility routines for dumping various SLI4 ↵James Smart3-0/+467
queues Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix unsol abts xri lookupJames Smart3-14/+25
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxxJames Smart7-31/+175
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Reregister VPI for SLI3 after cable moved to new Saturn portJames Smart1-5/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix driver crash during back-to-back ramp eventsJames Smart1-0/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix log message for Mailbox command when no error is ↵James Smart1-8/+17
detected Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Revise FCP LOG for easier Finisar trace correlationJames Smart1-1/+6
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix build warnings when debugfs is not definedJames Smart1-0/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix kernel panic when going into to sleep stateJames Smart1-0/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix error message displayed even when not an errorJames Smart1-10/+8
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix Read Link status dataJames Smart1-3/+4
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fixed system panic due to midlayer abort and driver ↵James Smart5-21/+54
complete race on SCSI cmd Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix unable to create vports on FCoE SLI4 adapterJames Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix initiator sending flogi after acking flogi from targetJames Smart2-4/+26
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver not supporting the get controller ↵James Smart2-2/+4
attributes command Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning ↵James Smart6-702/+594
profile change Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Fix bug with driver unload leaving a scsi host for a ↵James Smart1-2/+8
vport around Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: constify sg_proc_leaf_arrJörn Engel1-2/+2
Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: remove sg_mutexJörn Engel1-17/+2
With the exception of the detached field, sg_mutex no longer adds any locking. detached handling has been broken before and is still broken and this patch does not seem to make things worse than they were to begin with. However, I have observed cases of tasks being blocked for >200s waiting for sg_mutex. So the removal clearly adds value for very little cost. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: completely protect sfdsJörn Engel1-3/+16
sfds is protected by sg_index_lock - except for sg_open(), where it isn't. Change that and add some documentation. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: protect sdp->excludeJörn Engel1-7/+30
Changes since v1: set_exclude now returns the new value, which gets rid of the comma expression and the operator precedence bug. Thanks to Douglas for spotting it. sdp->exclude was previously protected by the BKL. The sg_mutex, which replaced the BKL, only semi-protected it, as it was missing from sg_release() and sg_proc_seq_show_debug(). Take an explicit spinlock for it. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: prevent unwoken sleepJörn Engel1-2/+14
srp->done is protected by sfp->rq_list_lock everywhere, except for this one case. Result can be that the wake-up happens before the cacheline with the changed srp->done has arrived, so the waiter can go back to sleep and never be woken up again. The wait_event_interruptible() means that anyone trying to debug this unlikely race will likely notice everything working fine again, as the next signal will unwedge things. Evil. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: remove closed flagJörn Engel1-7/+7
After sg_release() has been called, noone should be able to actually use that filedescriptor anymore. So if closed ever made a difference in the past five years or so, it would have meant a bug. Remove it. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> [jejb: fix up checkpatch warnings] Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: use wait_event_interruptible()Jörn Engel1-12/+7
Afaics the use of __wait_event_interruptible() as opposed to wait_event_interruptible() is purely historic. So let's follow the rest of the kernel and check the condition before prepare_to_wait() - and also make the code a bit nicer. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: remove while (1) non-loopJörn Engel1-30/+22
The while (1) construct isn't actually a loop at all. So let's not pretent and obfuscate the code. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sg: remove unnecessary indentationJörn Engel1-29/+24
blocking is de-facto a constant and the now-removed comment wasn't all that useful either. Without them and the resulting indentation the code is a bit nicer to read. Signed-off-by: Joern Engel <joern@logfs.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] sd: limit the scope of the async probe domainDan Williams5-6/+19
sd injects and synchronizes probe work on the global kernel-wide domain. This runs into conflict with PM that wants to perform resume actions in async context: [ 494.237079] INFO: task kworker/u:3:554 blocked for more than 120 seconds. [ 494.294396] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 494.360809] kworker/u:3 D 0000000000000000 0 554 2 0x00000000 [ 494.420739] ffff88012e4d3af0 0000000000000046 ffff88013200c160 ffff88012e4d3fd8 [ 494.484392] ffff88012e4d3fd8 0000000000012500 ffff8801394ea0b0 ffff88013200c160 [ 494.548038] ffff88012e4d3ae0 00000000000001e3 ffffffff81a249e0 ffff8801321c5398 [ 494.611685] Call Trace: [ 494.632649] [<ffffffff8149dd25>] schedule+0x5a/0x5c [ 494.674687] [<ffffffff8104b968>] async_synchronize_cookie_domain+0xb6/0x112 [ 494.734177] [<ffffffff810461ff>] ? __init_waitqueue_head+0x50/0x50 [ 494.787134] [<ffffffff8131a224>] ? scsi_remove_target+0x48/0x48 [ 494.837900] [<ffffffff8104b9d9>] async_synchronize_cookie+0x15/0x17 [ 494.891567] [<ffffffff8104ba49>] async_synchronize_full+0x54/0x70 <-- here we wait for async contexts to complete [ 494.943783] [<ffffffff8104b9f5>] ? async_synchronize_full_domain+0x1a/0x1a [ 495.002547] [<ffffffffa00114b1>] sd_remove+0x2c/0xa2 [sd_mod] [ 495.051861] [<ffffffff812fe94f>] __device_release_driver+0x86/0xcf [ 495.104807] [<ffffffff812fe9bd>] device_release_driver+0x25/0x32 <-- here we take device_lock() [ 853.511341] INFO: task kworker/u:4:549 blocked for more than 120 seconds. [ 853.568693] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 853.635119] kworker/u:4 D ffff88013097b5d0 0 549 2 0x00000000 [ 853.695129] ffff880132773c40 0000000000000046 ffff880130790000 ffff880132773fd8 [ 853.758990] ffff880132773fd8 0000000000012500 ffff88013288a0b0 ffff880130790000 [ 853.822796] 0000000000000246 0000000000000040 ffff88013097b5c8 ffff880130790000 [ 853.886633] Call Trace: [ 853.907631] [<ffffffff8149dd25>] schedule+0x5a/0x5c [ 853.949670] [<ffffffff8149cc44>] __mutex_lock_common+0x220/0x351 [ 854.001225] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4 [ 854.049082] [<ffffffff81304bd7>] ? device_resume+0x58/0x1c4 [ 854.097011] [<ffffffff8149ce48>] mutex_lock_nested+0x2f/0x36 <-- here we wait for device_lock() [ 854.145591] [<ffffffff81304bd7>] device_resume+0x58/0x1c4 [ 854.192066] [<ffffffff81304d61>] async_resume+0x1e/0x45 [ 854.237019] [<ffffffff8104bc93>] async_run_entry_fn+0xc6/0x173 <-- ...while running in async context Provide a 'scsi_sd_probe_domain' so that async probe actions actions can be flushed without regard for the state of PM, and allow for the resume path to handle devices that have transitioned from SDEV_QUIESCE to SDEV_DEL prior to resume. Acked-by: Alan Stern <stern@rowland.harvard.edu> [alan: uplevel scsi_sd_probe_domain, clarify scsi_device_resume] Signed-off-by: Dan Williams <dan.j.williams@intel.com> [jejb: remove unneeded config guards in include file] Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-18/+57
2012-05-10[SCSI] hpsa: dial down lockup detection during firmware flashStephen M. Cameron3-5/+37
Dial back the aggressiveness of the controller lockup detection thread. Currently it will declare the controller to be locked up if it goes for 10 seconds with no interrupts and no change in the heartbeat register. Dial back this to 30 seconds with no heartbeat change, and also snoop the ioctl path and if a firmware flash command is detected, dial it back further to 4 minutes until the firmware flash command completes. The reason for this is that during the firmware flash operation, the controller apparently doesn't update the heartbeat register as frequently as it is supposed to, and we can get a false positive. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 10:55:04 +0000