summaryrefslogtreecommitdiff
path: root/drivers/crypto
AgeCommit message (Collapse)AuthorFilesLines
2012-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds12-1330/+1629
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits) crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs crypto: serpent-sse2 - select LRW and XTS crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs crypto: twofish-x86_64-3way - select LRW and XTS crypto: xts - remove dependency on EXPERIMENTAL crypto: lrw - remove dependency on EXPERIMENTAL crypto: picoxcell - fix boolean and / or confusion crypto: caam - remove DECO access initialization code crypto: caam - fix polarity of "propagate error" logic crypto: caam - more desc.h cleanups crypto: caam - desc.h - convert spaces to tabs crypto: talitos - convert talitos_error to struct device crypto: talitos - remove NO_IRQ references crypto: talitos - fix bad kfree crypto: convert drivers/crypto/* to use module_platform_driver() char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver() crypto: serpent-sse2 - should select CRYPTO_CRYPTD crypto: serpent - rename serpent.c to serpent_generic.c crypto: serpent - cleanup checkpatch errors and warnings ...
2011-12-20crypto: picoxcell - fix boolean and / or confusionJamie Iles1-2/+2
The AES engine only supports 128 and 256 bit keys so we should correctly test for that. Cc: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - remove DECO access initialization codeKim Phillips2-14/+0
Access to the SEC4 DECOs (DEscriptor COntrollers) (for debug purposes) isn't supported or used, and its register access initialization code erroneously makes illegal i/o accesses that show up as errors when run under simulation. Remove it until proper support (via DECORR) is added. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - fix polarity of "propagate error" logicKim Phillips3-10/+11
the polarity of the definition for error propagation was reverse in the initial desc.h. Fix desc.h and its users. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - more desc.h cleanupsKim Phillips1-168/+167
manual removal of double-spaces - no non-whitespace changes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: caam - desc.h - convert spaces to tabsKim Phillips1-1039/+1039
this is the result of running unexpand -a on desc.h. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - convert talitos_error to struct deviceKim Phillips1-3/+2
SEC2/3 h/w doesn't have a dedicated interrupt for errors, and the only callsite for talitos_error has already done the type conversion, so simplify talitos_error to take a pointer to a struct device. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - remove NO_IRQ referencesKim Phillips1-9/+9
As prescribed by Linus: https://lkml.org/lkml/2011/12/2/290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-12-20crypto: talitos - fix bad kfreeKim Phillips1-4/+4
Fix a kfree to an invalid address which causes an oops when running on SEC v2.0 h/w (introduced in commit 702331b "crypto: talitos - add hmac algorithms"). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-30crypto: convert drivers/crypto/* to use module_platform_driver()Axel Lin6-69/+6
This patch converts the drivers in drivers/crypto/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: James Hsiao <jhsiao@amcc.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-25Merge git://github.com/herbertx/cryptoLinus Torvalds1-5/+7
* git://github.com/herbertx/crypto: crypto: mv_cesa - fix hashing of chunks > 1920 bytes
2011-11-21crypto: mv_cesa - fix hashing of chunks > 1920 bytesPhil Sutter1-5/+7
This was broken by commit 7759995c75ae0cbd4c861582908449f6b6208e7a (yes, myself). The basic problem here is since the digest state is only saved after the last chunk, the state array is only valid when handling the first chunk of the next buffer. Broken since linux-3.0. Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> Cc: <stable@kernel.org> # 3.1.x Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: caam - add support for MD5 algorithm variantsKim Phillips2-0/+58
specifically, add these algorithm combinations: authenc-hmac-md5-cbc-aes-caam authenc-hmac-md5-cbc-des3_ede-caam authenc-hmac-md5-cbc-des-caam Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - support for channel remap and 2nd IRQKim Phillips2-72/+149
Some later SEC v3.x are equipped with a second IRQ line. By correctly assigning IRQ affinity, this feature can be used to increase performance on dual core parts, like the MPC8572E and P2020E. The existence of the 2nd IRQ is determined from the device node's interrupt property. If present, the driver remaps two of four channels, which in turn makes those channels trigger their interrupts on the 2nd line instead of the first. To handle single- and dual-IRQ combinations efficiently, talitos gets two new interrupt handlers and back-half workers. [includes a fix to MCR_LO's address.] Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - prepare driver for channel remap supportKim Phillips2-30/+38
Add a reg member to the channel struct and use it to access channels. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - be less noisy on startupKim Phillips1-3/+4
talitos prints every algorithm it registers at module load time. Algorithms are being added that make for an excessively noisy console (latest HMACs patch makes an SEC 3.1 print 20 lines). Instead, display the SEC h/w version number, and inform the user of algorithm registration status in /proc/crypto, like so: talitos ffe30000.crypto: fsl,sec3.1 algorithms registered in /proc/crypto Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-21crypto: talitos - add hmac algorithmsLee Nipper1-2/+235
Add these hmac algorithms to talitos: hmac(md5), hmac(sha1), hmac(sha224), hmac(sha256), hmac(sha384), hmac(sha512). These are all type ahash. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Fixed up to not register HMAC algorithms on sec2.0 devices. Rationale (from Lee): on an 8349E Rev1.1, there's a problem with hmac for any talitos hmac sequence requiring an intermediate hash context (Pointer DWORD 1); the result is an incorrect hmac. An intermediate hash context is required for something longer than (65536-blocksize), and for other cases when update/finup/final are used inefficiently. Interestingly, a normal hash (without hmac) works perfectly when using an intermediate context. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31crypto: add module.h to those files that are explicitly using itPaul Gortmaker1-0/+1
Part of the include cleanups means that the implicit inclusion of module.h via device.h is going away. So fix things up in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-21crypto: talitos - handle descriptor not found in error pathKim Phillips1-8/+10
The CDPR (Current Descriptor Pointer Register) can be unreliable when trying to locate an offending descriptor. Handle that case by (a) not OOPSing, and (b) reverting to the machine internal copy of the descriptor header in order to report the correct execution unit error. Note: printing all execution units' ISRs is not effective because it results in an internal time out (ITO) error and the EU resetting its ISR value (at least when specifying an invalid key length on an SEC 2.2/MPC8313E). Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21crypto: Make hifn_795x build depend on !ARCH_DMA_ADDR_T_64BITRichard Weinberger2-4/+3
hifn_795x works only on 32 bit, remove the detection while loading the module and catch non-32 bit systems at build time. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-20crypto: picoxcell - add dependency on HAVE_CLKJamie Iles1-1/+1
The picoxcell crypto driver requires the clk API, but the platform in mainline does not currently support it. Add an explicit dependency on HAVE_CLK to avoid build breakage. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-15crypto: n2 - Fix a get/put_cpu() imbalanceThomas Meyer1-2/+2
Fix a get/put_cpu() imbalance in the error case when qp == NULL Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-10crypto: picoxcell - fix possible invalid pointer dereferenceJamie Iles1-1/+1
The completion callback will free the request so we must remove it from the completion list before calling the callback. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-10crypto: picoxcell - support for device tree matchingJamie Iles1-6/+30
Allow the crypto engines to be matched from device tree bindings. Cc: devicetree-discuss@lists.ozlabs.org Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-10crypto: picoxcell - add connection ID to the clock nameJamie Iles1-1/+1
For using the device tree probing we use a connection ID for the clk_get() operation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-10crypto: picoxcell - convert to platform ID tableJamie Iles1-60/+33
Use a platform ID table and a single platform_driver. It's neater and makes the device tree addition easier and more consistent. Rename the match values to be inline with what they'll be in the device tree bindings. There aren't any current in-tree users of the existing device names. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-08-03crypto: padlock-aes - Make module loading even quieter when hardware is missingJonathan Nieder1-3/+1
When loading aes via the module alias, a padlock module failing to load due to missing hardware is not particularly notable. With v2.6.27-rc1~1107^2~14 (crypto: padlock - Make module loading quieter when hardware isn't available, 2008-07-03), the padlock-aes module suppresses the relevant messages when the "quiet" flag is in use; but better to suppress this particular message completely, since the administrator can already distinguish such errors by the absence of a message indicating initialization failing or succeeding. This avoids occasional messages in syslog of the form padlock_aes: VIA PadLock not detected. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-28n2_crypto: Attach on Niagara-T3.David S. Miller1-15/+18
A small modification was necessary since in the machine description for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property. That's OK because this property was always nothing more than an array of integers '1' ... 'nr_inos + 1' so we can just compute it in-place. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds1-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: take the ACL checks to common code bury posix_acl_..._masq() variants kill boilerplates around posix_acl_create_masq() generic_acl: no need to clone acl just to push it to set_cached_acl() kill boilerplate around posix_acl_chmod_masq() reiserfs: cache negative ACLs for v1 stat format xfs: cache negative ACLs if there is no attribute fork 9p: do no return 0 from ->check_acl without actually checking vfs: move ACL cache lookup into generic code CIFS: Fix oops while mounting with prefixpath xfs: Fix wrong return value of xfs_file_aio_write fix devtmpfs race caam: don't pass bogus S_IFCHR to debugfs_create_...() get rid of create_proc_entry() abuses - proc_mkdir() is there for purpose asus-wmi: ->is_visible() can't return negative fix jffs2 ACLs on big-endian with 16bit mode_t 9p: close ACL leaks ocfs2_init_acl(): fix a leak VFS : mount lock scalability for internal mounts
2011-07-24caam: don't pass bogus S_IFCHR to debugfs_create_...()Al Viro1-13/+13
it will be replaced with S_IFREG anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-15crypto: caam - ablkcipher supportYuan Kang2-0/+511
caam now supports encrypt and decrypt for aes, des and 3des Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - faster aead implementationYuan Kang2-330/+832
Job descriptors only contain header and seq pointers. Other commands are stored in separate shared descriptors for encrypt, decrypt and givencrypt, stored as arrays in caam_ctx. This requires additional macros to create math commands to calculate assoclen and cryptlen. Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - structure renamingYuan Kang1-21/+43
caam_ctx.key_phys to key_dma caam_alg_template supports multiple algorithm types listed in union, which requires cases for different types in function caam_alg_alloc Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: caam - shorter namesYuan Kang1-137/+137
"aead_authenc" and "ipsec_esp" changed to "aead," except for function "ipsec_esp," which is changed to "init_aead_job." Variable name of aead_request structures changed to "req" and name of aead_givcrypt_request structure changed to "areq" Signed-off-by: Yuan Kang <Yuan.Kang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - don't bad_key in ablkcipher setkeyKim Phillips1-11/+0
crypto/ablkcipher.c's setkey() has already checked against the min, max key sizes before it calls here, and all max_keysize assignments in the algorithm template array do not exceed TALITOS_MAX_KEY_SIZE. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - remove unused giv from ablkcipher methodsKim Phillips1-4/+3
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - don't set done notification in hot pathKim Phillips1-3/+3
IRQ done notification is always set. Remove its explicit assignment from the hot path by including it in the descriptor header template assignment in talitos_cra_init. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-07-15crypto: talitos - ensure request ordering within a single tfmKim Phillips1-9/+14
Assign single target channel per tfm in talitos_cra_init instead of performing channel scheduling dynamically during the encryption request. This changes the talitos_submit interface to accept a new channel number argument. Without this, rapid bursts of misc. sized requests could make it possible for IPsec packets to be encrypted out-of-order, which would result in packet drops due to sequence numbers falling outside the anti-reply window on a peer gateway. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: crypto4xx - Perform read/modify/write on device control registerJosh Boyer1-1/+4
The Security function on the AMCC SoCs has multiple engines within a single MMIO range. The crypto driver currently enables the 3DES functionality by doing a blind write to the device control register. This can unintentionally disable other functions like the PKA or TRNG when the driver is loaded. Perform a read/modify/write to enable the 3DES function instead. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: caam - fix build warning when DEBUG_FS not configuredKim Phillips1-1/+3
drivers/crypto/caam/ctrl.c: In function 'caam_probe': drivers/crypto/caam/ctrl.c:55:23: warning: unused variable 'perfmon' Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - do not schedule tasklet if there is no active requestsDmitry Kasatkin1-0/+5
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - clear device flags when finishing requestDmitry Kasatkin1-1/+3
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - irq handler must not clear error codeDmitry Kasatkin1-1/+0
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - irq and dma handling changesDmitry Kasatkin1-13/+27
It could be a situation, that tasklet is executed twice because of certain delay between dma callback and irq handler execution. In that case, second tasklet execution could actually corrupt the data of the new started dma transactions. This patch improves tasklet logic and prevents above described cases. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - remove dedicated queue handling taskletDmitry Kasatkin1-15/+9
Calling omap_sham_handle_queue from "done" tasklet should be done after irq scheduled tasklet completes. Having additional tasklet does not solve that issue because it might be execute before. So queue handling tasklet has been removed and functionality integrated into single tasklet. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - remove unnecessary local variableDmitry Kasatkin1-2/+1
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - move some flags to device contextDmitry Kasatkin1-13/+6
Couple of context flags have been moved to device flags. IRQ and tasklet handlers does not need to access request context anymore. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - replace flags operation with atomic bit operationsDmitry Kasatkin1-16/+13
Some flags are changed in interrupt handlers and verified in the tasklet. There might be a race condition when tasklet is interrupted or another cpu/core will run IRQ handler and tasklet in parallel. Atomic bitops functions are now used instead of bitmask operations. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30crypto: omap-sham - replace flags bit mask with bit numberDmitry Kasatkin1-50/+52
Flags mask cannot be used with atomic bit operations. This patch changes masks to bit numbers. Atomic bit operations will be used by following patches. Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 00:45:26 +0000