From 234445b4e4542f3e0f216459245ab369a18adcf2 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 22 Jul 2011 18:57:55 +0000 Subject: watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl This part add's the WDIOC_SETOPTIONS ioctl functionality to the WatchDog Timer Driver Core framework. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck Acked-by: Arnd Bergmann Acked-by: Wolfram Sang --- Documentation/watchdog/watchdog-kernel-api.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'Documentation/watchdog') diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index abbcf2ce8f6..429f81bf0cf 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -56,8 +56,9 @@ It contains following fields: This data should only be accessed via the watchdog_set_drvadata and watchdog_get_drvdata routines. * status: this field contains a number of status bits that give extra - information about the status of the device (Like: is the device opened via - the /dev/watchdog interface or not, ...). + information about the status of the device (Like: is the watchdog timer + running/active, is the device opened via the /dev/watchdog interface or not, + ...). The list of watchdog operations is defined as: @@ -109,6 +110,10 @@ they are supported. These optional routines/operations are: The status bits should (preferably) be set with the set_bit and clear_bit alike bit-operations. The status bits that are defined are: +* WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device + is active or not. When the watchdog is active after booting, then you should + set this status bit (Note: when you register the watchdog timer device with + this bit set, then opening /dev/watchdog will skip the start operation) * WDOG_DEV_OPEN: this status bit shows whether or not the watchdog device was opened via /dev/watchdog. (This bit should only be used by the WatchDog Timer Driver Core). -- cgit v1.2.3