summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2012-03-31ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett1-3/+10
Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-30Merge branch 'release' of ↵Linus Torvalds1-37/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management changes from Len Brown: - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup - cpuidle evolving, more ARM use - thermal sub-system evolving, ditto - assorted other PM bits Fix up conflicts in various cpuidle implementations due to ARM cpuidle cleanups (ARM at91 self-refresh and cpu idle code rewritten into "standby" in asm conflicting with the consolidation of cpuidle time keeping), trivial SH include file context conflict and RCU tracing fixes in generic code. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits) ACPI throttling: fix endian bug in acpi_read_throttling_status() Disable MCP limit exceeded messages from Intel IPS driver ACPI video: Don't start video device until its associated input device has been allocated ACPI video: Harden video bus adding. ACPI: Add support for exposing BGRT data ACPI: export acpi_kobj ACPI: Fix logic for removing mappings in 'acpi_unmap' CPER failed to handle generic error records with multiple sections ACPI: Clean redundant codes in scan.c ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed() ACPI: consistently use should_use_kmap() PNPACPI: Fix device ref leaking in acpi_pnp_match ACPI: Fix use-after-free in acpi_map_lsapic ACPI: processor_driver: add missing kfree ACPI, APEI: Fix incorrect APEI register bit width check and usage Update documentation for parameter *notrigger* in einj.txt ACPI, APEI, EINJ, new parameter to control trigger action ACPI, APEI, EINJ, limit the range of einj_param ACPI, APEI, Fix ERST header length check cpuidle: power_usage should be declared signed integer ...
2012-03-30ACPI, PCI: Move acpi_dev_run_wake() to ACPI coreLin Ming1-37/+3
acpi_dev_run_wake() is a generic function which can be used by other subsystem too. Rename it to acpi_pm_device_run_wake, to be consistent with acpi_pm_device_sleep_wake. Then move it to ACPI core. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds29-525/+1181
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-22Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+18
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20Merge tag 'driver-core-3.3' of ↵Linus Torvalds2-37/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches for 3.4-rc1 from Greg KH: "Here's the big driver core merge for 3.4-rc1. Lots of various things here, sysfs fixes/tweaks (with the nlink breakage reverted), dynamic debugging updates, w1 drivers, hyperv driver updates, and a variety of other bits and pieces, full information in the shortlog." * tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits) Tools: hv: Support enumeration from all the pools Tools: hv: Fully support the new KVP verbs in the user level daemon Drivers: hv: Support the newly introduced KVP messages in the driver Drivers: hv: Add new message types to enhance KVP regulator: Support driver probe deferral Revert "sysfs: Kill nlink counting." uevent: send events in correct order according to seqnum (v3) driver core: minor comment formatting cleanups driver core: move the deferred probe pointer into the private area drivercore: Add driver probe deferral mechanism DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers w1_bq27000: Only one thread can access the bq27000 at a time. w1_bq27000 - remove w1_bq27000_write w1_bq27000: remove unnecessary NULL test. sysfs: Fix memory leak in sysfs_sd_setsecdata(). intel_idle: Revert change of auto_demotion_disable_flags for Nehalem w1: Fix w1_bq27000 driver-core: documentation: fix up Greg's email address powernow-k6: Really enable auto-loading powernow-k7: Fix CPU family number ...
2012-03-20PCI: fix bridge I/O window bus-to-resource conversionBjorn Helgaas1-0/+1
In 5bfa14ed9f3c, I forgot to initialize res2.flags before calling pcibios_bus_to_resource(), which depends on the resource type to locate the correct aperture. This bug won't hurt x86, which currently never has an offset between bus and CPU addresses, but will affect other architectures. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman4-13/+33
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-07PCI: ignore pre-1.1 ASPM quirking when ASPM is disabledMatthew Garrett1-0/+3
Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-03-04tg3: Recode PCI MRRS adjustment as a PCI quirkMatt Carlson1-0/+18
This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01PCI / PCIe: Introduce command line option to disable ARIRafael J. Wysocki1-1/+6
There are PCIe devices on the market that report ARI support but then fail to initialize correctly when ARI is actually used. This leads to situations in which kernels 2.6.34 and newer fail to handle systems where the previous kernels worked without any apparent problems. Unfortunately, it is currently unknown how many such devices are there. For this reason, introduce a new kernel command line option, pci=noari, allowing users to disable PCIe ARI altogether if they see problems with PCIe device initialization. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: make acpihp use __pci_remove_bus_device insteadYinghai Lu1-1/+1
pci_stop_bus_device gets called before in the same loop. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: export __pci_remove_bus_deviceYinghai Lu1-1/+3
Don't switch to pci_remove_bus_device yet, keep the __ prefix for now (the behavior is still the same: remove without stopping first). This allows other out of tree users or pending patches to get notified from compiler warning. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridgeYinghai Lu1-3/+4
The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu13-19/+19
The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: print out PCI device info along with durationYinghai Lu1-3/+4
Makes it a little easier to figure out which device may have caused a slow quirk. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Move "pci reassigndev resource alignment" out of quirks.cYinghai Lu5-71/+66
This isn't really a quirk; calling it directly from pci_add_device makes more sense. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for ti816x class fixupYinghai Lu1-5/+4
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for intel e100 interrupt fixupYinghai Lu1-1/+2
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for netmos class fixupYinghai Lu1-3/+3
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for legacy ATA NO_D3Yinghai Lu1-7/+10
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for cardbus_legacyYinghai Lu1-4/+4
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Use class for quirk for host bridge mmio_always_onYinghai Lu1-3/+3
Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Add class support in quirk handlingYinghai Lu1-5/+7
Recently added support to allow quirks to report duration also make the boot log very crowded when initcall_debug is specified. One thing we can to do mitigate this is to not call quirks unnecessarily by adding a new quirk declaration macro that takes a class argument. The new macro takes a class value and a class shift value (since it can vary) so that quirks will be limited to certain device classes, greatly reducing the number we call on every PCI device addition. -v2: fix v1 that left over of sparated patch. -v3: according to Jesse, change cls to class, cls_shift, to class_shift. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24Merge branch 'pci-next+probe_only+bus2res-fb127cb' of ↵Jesse Barnes3-53/+188
git://github.com/bjorn-helgaas/linux into linux-next
2012-02-24PCI: add a PCI resource reallocation config optionYinghai Lu2-0/+41
Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: print out suggestion about using pci=reallocYinghai Lu1-0/+3
let user know they could try if pci=realloc could help. -v2: update suggestion text. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: prepare pci=realloc for multiple optionsYinghai Lu3-9/+31
Let the user could enable and disable with pci=realloc=on or pci=realloc=off Also 1. move variable and functions near the place they are used. 2. change macro to function 3. change related functions and variable to static and _init 4. update parameter description accordingly. This will let us add a config option to control default behavior, and still allow the user to turn off automatic reallocation if it fails on their platform until a permanent solution is found. -v2: still honor pci=realloc, and treat it as pci=realloc=on also use enum instead of ... -v3: update kernel-paramenters.txt according to Jesse. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Retry on IORESOURCE_IO type allocationsYinghai Lu1-11/+1
When enabling pci reallocation for a pci bridge, we clear the small size in in bridge and re-assign with requested + optional size for first several tries, but Ram mention could have problem with one case: https://bugzilla.kernel.org/show_bug.cgi?id=15960 After checking the booting log in https://lkml.org/lkml/2010/4/19/44 [regression, bisected] Xonar DX invalid PCI I/O range since 977d17bb174 We should not stop too early for io ports. Apr 19 10:19:38 [kernel] pci 0000:04:00.0: BAR 7: can't assign io (size 0x4000) Apr 19 10:19:38 [kernel] pci 0000:05:01.0: BAR 8: assigned [mem 0x80400000-0x805fffff] Apr 19 10:19:38 [kernel] pci 0000:05:01.0: BAR 7: can't assign io (size 0x2000) Apr 19 10:19:38 [kernel] pci 0000:05:02.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:05:03.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:08:00.0: BAR 7: can't assign io (size 0x1000) Apr 19 10:19:38 [kernel] pci 0000:09:04.0: BAR 0: can't assign io (size 0x100) and clear 00:1c.0 to retry again. This patch removes IORESOUCE_IO checking, and tries one more time. It gives us a chance to get an allocation for the 00:1c.0 io port range because the range from 0x4000 to 0x8000 will be freed and we can use it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: collapse pcibios_resource_to_busBjorn Helgaas1-29/+15
Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: add generic pcibios_resource_to_bus()Bjorn Helgaas1-0/+16
This replaces the generic versions of pcibios_resource_to_bus() and pcibios_bus_to_resource() in asm-generic/pci.h with versions that use pci_resource_to_bus() and pci_bus_to_resource(). The replacements are equivalent except that they can apply host bridge window offsets when the arch has supplied them by using pci_add_resource_offset(). Each arch can convert to using pci_add_resource_offset() individually by removing its device resource fixups from pcibios_fixup_bus() and supplying ARCH_HAS_GENERIC_PCI_OFFSETS. ARCH_HAS_GENERIC_PCI_OFFSETS can be removed after all have converted. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: convert bus addresses to resource when reading BARsBjorn Helgaas1-25/+104
Some PCI host bridges translate CPU addresses to PCI bus addresses. Previously, we initialized pci_dev resources with PCI bus addresses, then converted them to CPU addresses later in arch-specific code (pcibios_fixup_resources()), which leaves a window of time where the pci_dev resources are incorrect. This patch adds support in the core for this address translation. When the arch creates the root bus, it can supply the host bridge address translation information, and the core can use it to set the pci_dev resources correctly from the beginning. This gives us a way to fix the problem that quirks that run between device discovery and pcibios_fixup_resources() fail because they use pci_dev resources that haven't been converted. The reference below is to one such problem that affected ARM and ia64. Note that this patch has no effect until an arch starts using pci_add_resource_offset() with a non-zero offset: before that, all all host bridge windows have a zero offset and pci_bus_to_resource() copies the pci_bus_region directly to the struct resource. Reference: https://lkml.org/lkml/2009/10/12/405 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: add struct pci_host_bridge_window with CPU/bus address offsetBjorn Helgaas2-20/+42
Some PCI host bridges apply an address offset, so bus addresses on PCI are different from CPU addresses. This patch adds a way for architectures to tell the PCI core about this offset. For example: LIST_HEAD(resources); pci_add_resource_offset(&resources, host->io_space, host->io_offset); pci_add_resource_offset(&resources, host->mem_space, host->mem_offset); pci_scan_root_bus(parent, bus, ops, sysdata, &resources); Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: add struct pci_host_bridge and a list of all bridges foundBjorn Helgaas1-5/+34
This adds a list of all PCI host bridges we find and a way to look up the host bridge from a pci_dev. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: don't publish new root bus until it's fully initializedBjorn Helgaas1-4/+4
When pci_create_root_bus() adds the new struct pci_bus to the global pci_root_buses list, the bus becomes visible to other parts of the kernel, so it should be fully initialized. This patch delays adding the bus to the pci_root_buses list until after all the struct pci_bus initialization is finished. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: make pci_flags non-weakBjorn Helgaas1-1/+1
No architecture defines its own pci_flags, so the core symbol does not need to be weak. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: make pci_flags always availableBjorn Helgaas1-0/+3
If we move resource assignment functions into the core, we'll still need a way for architectures to prevent reassignment, e.g., the "pci_probe_only" functionality, and we'll need a generic, always available way the core can test for that. The "pci_flags" arrangement used by several architectures seems like a convenient way to do this. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp driverMUNEDA Takahiro2-2/+26
Add a parameter to avoid using MSI/MSI-X for PCIe native hotplug; it's known to be buggy on some platforms. In my environment, while shutting down, following stack trace is shown sometimes. irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 1081, comm: reboot Not tainted 3.2.0 #1 Call Trace: <IRQ> [<ffffffff810cec1d>] __report_bad_irq+0x3d/0xe0 [<ffffffff810cee1c>] note_interrupt+0x15c/0x210 [<ffffffff810cc485>] handle_irq_event_percpu+0xb5/0x210 [<ffffffff810cc621>] handle_irq_event+0x41/0x70 [<ffffffff810cf675>] handle_fasteoi_irq+0x55/0xc0 [<ffffffff81015356>] handle_irq+0x46/0xb0 [<ffffffff814fbe9d>] do_IRQ+0x5d/0xe0 [<ffffffff814f146e>] common_interrupt+0x6e/0x6e [<ffffffff8106b040>] ? __do_softirq+0x60/0x210 [<ffffffff8108aeb1>] ? hrtimer_interrupt+0x151/0x240 [<ffffffff814fb5ec>] call_softirq+0x1c/0x30 [<ffffffff810152d5>] do_softirq+0x65/0xa0 [<ffffffff8106ae9d>] irq_exit+0xbd/0xe0 [<ffffffff814fbf8e>] smp_apic_timer_interrupt+0x6e/0x99 [<ffffffff814f9e5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814f0fb1>] ? _raw_spin_unlock_irqrestore+0x11/0x20 [<ffffffff812629fc>] pci_bus_write_config_word+0x6c/0x80 [<ffffffff81266fc2>] pci_intx+0x52/0xa0 [<ffffffff8127de3d>] pci_intx_for_msi+0x1d/0x30 [<ffffffff8127e4fb>] pci_msi_shutdown+0x7b/0x110 [<ffffffff81269d34>] pci_device_shutdown+0x34/0x50 [<ffffffff81326c4f>] device_shutdown+0x2f/0x140 [<ffffffff8107b981>] kernel_restart_prepare+0x31/0x40 [<ffffffff8107b9e6>] kernel_restart+0x16/0x60 [<ffffffff8107bbfd>] sys_reboot+0x1ad/0x220 [<ffffffff814f4b90>] ? do_page_fault+0x1e0/0x460 [<ffffffff811942d0>] ? __sync_filesystem+0x90/0x90 [<ffffffff8105c9aa>] ? __cond_resched+0x2a/0x40 [<ffffffff814ef090>] ? _cond_resched+0x30/0x40 [<ffffffff81169e17>] ? iterate_supers+0xb7/0xd0 [<ffffffff814f9382>] system_call_fastpath+0x16/0x1b handlers: [<ffffffff8138a0f0>] usb_hcd_irq [<ffffffff8138a0f0>] usb_hcd_irq [<ffffffff8138a0f0>] usb_hcd_irq Disabling IRQ #16 An un-wanted interrupt is generated when PCI driver switches from MSI/MSI-X to INTx while shutting down the device. The interrupt does not happen if MSI/MSI-X is not used on the device. I confirmed that this problem does not happen if pcie_hp=nomsi was specified and hotplug operation worked fine as usual. v2: Automatically disable MSI/MSI-X against following device: PCI bridge: Integrated Device Technology, Inc. Device 807f (rev 02) v3: Based on the review comment, combile the if statements. v4: Removed module parameter. Move some code to build pciehp as a module. Move device specific code to driver/pci/quirks.c. v5: Drop a device specific code until getting a vendor statement. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: move pci_find_saved_cap out of linux/pci.hYinghai Lu1-0/+19
Only one user in driver/pci/pci.c, so we don't need to put it in global pci.h Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: fix memleak for pci dev removing during hotplugYinghai Lu3-0/+11
unreferenced object 0xffff880276d17700 (size 64): comm "swapper/0", pid 1, jiffies 4294897182 (age 3976.028s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 18 f9 de 76 02 88 ff ff ...........v.... 10 00 00 00 0e 00 00 00 0f 28 40 00 00 00 00 00 .........(@..... backtrace: [<ffffffff81c8aede>] kmemleak_alloc+0x26/0x43 [<ffffffff811385f0>] __kmalloc+0x121/0x183 [<ffffffff813cf821>] pci_add_cap_save_buffer+0x35/0x7c [<ffffffff813d12b7>] pci_allocate_cap_save_buffers+0x1d/0x65 [<ffffffff813cdb52>] pci_device_add+0x92/0xf1 [<ffffffff81c8afe6>] pci_scan_single_device+0x9f/0xa1 [<ffffffff813cdbd2>] pci_scan_slot.part.20+0x21/0x106 [<ffffffff813cdce2>] pci_scan_slot+0x2b/0x35 [<ffffffff81c8dae4>] __pci_scan_child_bus+0x51/0x107 [<ffffffff81c8d75b>] pci_scan_bridge+0x376/0x6ae [<ffffffff81c8db60>] __pci_scan_child_bus+0xcd/0x107 [<ffffffff81c8dbab>] pci_scan_child_bus+0x11/0x2a [<ffffffff81cca58c>] pci_acpi_scan_root+0x18b/0x21c [<ffffffff81c916be>] acpi_pci_root_add+0x1e1/0x42a [<ffffffff81406210>] acpi_device_probe+0x50/0x190 [<ffffffff814a0227>] really_probe+0x99/0x126 Need to free saved_buffer for capabilities. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: Fix device class print outYinghai Lu1-7/+5
Found debug print of class is shifted. | pci 0000:f8:15.2: [8086:2b56] type 0 class 0x000600 Code is trying to print class with 6 digits, but use shifted class with 4 digits valid value as variable. Change to original dev->class directly. Also remove not needed calculating of local variable class, because it will be updated after pci_fixup_device(pci_fixup_early...) Also unify type print out when class and header is not matched. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: Skip cardbus assigned resource reset during pci bus rescanYinghai Lu1-0/+14
Otherwise when rescan is used for cardbus, assigned resources will get cleared. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: Fix "cardbus bridge resources as optional" size handlingYinghai Lu1-28/+37
We should not set the requested size to -2; that will confuse the resource list sorting with align when SIZEALIGN is used. Change to STARTALIGN and pass align from start; we are safe to do that just as we do that regular pci bridge. In the long run, we should just treat cardbus like a regular pci bridge. Also fix the case when realloc_head is not passed: we should keep the requested size. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: Disable cardbus bridge MEM1 prefetchable bitYinghai Lu1-0/+8
Some BIOSes enable prefetch on both MEM0 and MEM1. But the cardbus code assumes MEM1 is non-pref... Discussion could be found at: https://lkml.org/lkml/2012/1/12/1 https://bugzilla.kernel.org/show_bug.cgi?id=41622#c23 Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-18Merge branch 'for-linus' of ↵Linus Torvalds3-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci One regression fix for SR-IOV on PPC and a couple of misc fixes from Yinghai. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Fix pci cardbus removal PCI: set pci sriov page size before reading SRIOV BAR PCI: workaround hard-wired bus number V2
2012-02-17PCI / PM: Disable wakeup during shutdown for devices not enabled to wake upRafael J. Wysocki1-0/+10
If a PCI device is enabled to generate wakeup signals (PME) when put into a low-power state by runtime PM, it will be still enabled to generate those signals after the system shutdown, unless its driver's .shutdown() callback takes care of the wakeup signals generation setting. Moreover, there are devices that are not enabled to wake up the system and that are configured by runtime PM to generate wakeup signals so that (runtime) remote wakeup works with them. Those devices should be reconfigured during system shutdown so that they don't generate wakeup signals, but at least some drivers don't do that. However, that very well may be done by the PCI core so that drivers don't have to worry about it. For this reason, modify pci_device_shutdown() to disable the generation of wakeup events for devices not supposed to wake up the system. References: https://bugzilla.kernel.org/show_bug.cgi?id=37952 Reported-and-tested-by: Kamil Iskra <kamil.54002@iskra.name> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-17PCI: Fix /sys warning when sriov enabled and card is hot removedYinghai Lu1-1/+7
sysfs is a bit stricter now and emits warnings in more cases. For SRIOV hotplug, we are calling pci_stop_dev() for each VF first (after we update pci_stop_bus_devices) which remove each VF subdir. So double check the VF dir in /sys before trying to remove the physfn link. Signed-of-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-17PCI: pcie: Add support for setting default ASPM policyMatthew Garrett2-0/+33
Distributions may wish to provide different defaults for PCIE ASPM depending on their target audience. Provide a configuration option for choosing the default policy. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>