summaryrefslogtreecommitdiff
path: root/Documentation/networking
AgeCommit message (Collapse)AuthorFilesLines
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-07dccp: make upper bound for seq_window consistent on 32/64 bitGerrit Renker1-0/+1
The 'seq_window' sysctl sets the initial value for the DCCP Sequence Window, which may range from 32..2^46-1 (RFC 4340, 7.5.2). The patch sets the upper bound consistently to 2^32-1 on both 32 and 64 bit systems, which should be sufficient - with a RTT of 1sec and 1-byte packets, a seq_window of 2^32-1 corresponds to a link speed of 34 Gbps. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-12-24Documentation/networking: Update Intel Wired LAN docsJeff Kirsher7-38/+29
- Update the Intel Wired LAN documentation with the latest URL for ethtool. - replace "Ethtool" with "ethtool" Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina1-0/+10
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16net: Add batman-adv meshing protocolSven Eckelmann1-0/+240
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-13net: change ip_default_ttl documentationEric Dumazet1-1/+3
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10Documentation/networking/ixgbevf.txt: Update documentationJeff Kirsher1-4/+0
Update Intel Wired LAN ixgbevf documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-10Documentation/networking/ixgbe.txt: Update ixgbe documentationJeff Kirsher1-75/+136
Update Intel Wired LAN ixgbe documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-10Documentation/networking/igbvf.txt: Update documentationJeff Kirsher1-1/+3
Update Intel Wired LAN igbvf documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-10Documentation/networking/igb.txt: update documentationJeff Kirsher1-27/+4
Update Intel Wired LAN igb documentation. v2- Updated the ethtool support link, removed the LRO section and anti-spoofing sections. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-10Documentation/networking/e1000e.txt: Update documentationJeff Kirsher1-18/+22
Update Intel Wired LAN e1000e documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-10Documentation/networking/e1000.txt: Update documentationJeff Kirsher1-5/+5
Update Intel Wired LAN e1000 documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2010-12-08Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
2010-12-07dccp: Policy-based packet dequeueing infrastructureTomasz Grobelny1-0/+20
This patch adds a generic infrastructure for policy-based dequeueing of TX packets and provides two policies: * a simple FIFO policy (which is the default) and * a priority based policy (set via socket options). Both policies honour the tx_qlen sysctl for the maximum size of the write queue (can be overridden via socket options). The priority policy uses skb->priority internally to assign an u32 priority identifier, using the same ranking as SO_PRIORITY. The skb->priority field is set to 0 when the packet leaves DCCP. The priority is supplied as ancillary data using cmsg(3), the patch also provides the requisite parsing routines. Signed-off-by: Tomasz Grobelny <tomasz@grobelny.oswiecenia.net> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2010-12-03qlcnic: LICENSE file for qlcnicSritej Velaga1-0/+327
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)Alexey Dobriyan1-0/+1
tcp_win_from_space() does the following: if (sysctl_tcp_adv_win_scale <= 0) return space >> (-sysctl_tcp_adv_win_scale); else return space - (space >> sysctl_tcp_adv_win_scale); "space" is int. As per C99 6.5.7 (3) shifting int for 32 or more bits is undefined behaviour. Indeed, if sysctl_tcp_adv_win_scale is exactly 32, space >> 32 equals space and function returns 0. Which means we busyloop in tcp_fixup_rcvbuf(). Restrict net.ipv4.tcp_adv_win_scale to [-31, 31]. Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312 Steps to reproduce: echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale wget www.kernel.org [softlockup] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17clarify documentation for net.ipv4.igmp_max_membershipsJeremy Eder1-3/+21
This patch helps clarify documentation for net.ipv4.igmp_max_memberships by providing a formula for calculating the maximum number of multicast groups that can be subscribed to, plus defining the theoretical limit. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeremy Eder <jeder@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15Docs/Kconfig: Update: osdl.org -> linuxfoundation.orgMichael Witten3-5/+5
Some of the documentation refers to web pages under the domain `osdl.org'. However, `osdl.org' now redirects to `linuxfoundation.org'. Rather than rely on redirections, this patch updates the addresses appropriately; for the most part, only documentation that is meant to be current has been updated. The patch should be pretty quick to scan and check; each new web-page url was gotten by trying out the original URL in a browser and then simply copying the the redirected URL (formatting as necessary). There is some conflict as to which one of these domain names is preferred: linuxfoundation.org linux-foundation.org So, I wrote: info@linuxfoundation.org and got this reply: Message-ID: <4CE17EE6.9040807@linuxfoundation.org> Date: Mon, 15 Nov 2010 10:41:42 -0800 From: David Ames <david@linuxfoundation.org> ... linuxfoundation.org is preferred. The canonical name for our web site is www.linuxfoundation.org. Our list site is actually lists.linux-foundation.org. Regarding email linuxfoundation.org is preferred there are a few people who choose to use linux-foundation.org for their own reasons. Consequently, I used `linuxfoundation.org' for web pages and `lists.linux-foundation.org' for mailing-list web pages and email addresses; the only personal email address I updated from `@osdl.org' was that of Andrew Morton, who prefers `linux-foundation.org' according `git log'. Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-14Merge branch 'master' of ↵David S. Miller1-0/+9
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-11-12docs: Add neigh/gc_thresh3 and route/max_size documentation.Ben Greear1-0/+9
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12stmmac: update the driver documentationGiuseppe Cavallaro1-11/+37
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-1/+1
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-24phylib: make local function staticstephen hemminger1-18/+0
The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21can-raw: add msg_flags to distinguish local trafficOliver Hartkopp1-0/+12
CAN has no addressing scheme. It is currently impossible for userspace to tell is a received CAN frame comes from another process on the local host, or from a remote CAN device. This patch add support for userspace applications to distinguish between 'own', 'local' and 'remote' CAN traffic. The distinction is made by returning flags in msg->msg_flags in the call to recvmsg(). The added documentation explains the introduced flags. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13Documentation: Update Phonet doc for Pipe controller changesKumar Sanghvi1-18/+14
Updates to Phonet doc for Pipe controller 'connect' socket implementation and changes related to socket options. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08Phonet: cleanup pipe enable socket optionRémi Denis-Courmont1-12/+3
The current code works like this: int garbage, status; socklen_t len = sizeof(status); /* enable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &garbage, sizeof(garbage)); /* disable pipe */ setsockopt(fd, SOL_PNPIPE, PNPIPE_DISABLE, &garbage, sizeof(garbage)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_INQ, &status, &len); ...which does not follow the usual socket option pattern. This patch merges all three "options" into a single gettable&settable option, before Linux 2.6.37 gets out: int status; socklen_t len = sizeof(status); /* enable pipe */ status = 1; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* disable pipe */ status = 0; setsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, sizeof(status)); /* get status */ getsockopt(fd, SOL_PNPIPE, PNPIPE_ENABLE, &status, &len); This also fixes the error code from EFAULT to ENOTCONN. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06Merge branch 'master' of ↵David S. Miller3-314/+401
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/pcmcia/pcnet_cs.c net/caif/caif_socket.c
2010-10-05bonding: add retransmit membership reports tunableFlavio Leitner1-0/+8
Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05e1000e.txt: Add e1000e documentationJeff Kirsher1-0/+302
Adds documentation for the e1000e networking driver. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05e1000.txt: Update e1000 documentationJeff Kirsher1-277/+96
Updated the e1000 networking driver documentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05ixgbevf.txt: Update ixgbevf documentationJeff Kirsher1-37/+3
Update the documentation for the ixgbevf (ixgbe virtual function driver). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Documentation: Update Phonet doc for Pipe Controller implementationKumar Sanghvi1-0/+53
Updates the Phonet document with description related to Pipe controller implementation Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15Phonet: resource routing documentationRémi Denis-Courmont1-0/+16
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03ipv6: Update ip-sysctl.txt documentation for recent changes to accept_ra and ↵Thomas Graf1-5/+22
forwarding Documentation for recent changes to the tunables accept_ra and forwarding. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-3: use per-route RTO or TCP RTO as fallbackGerrit Renker1-0/+3
This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time RTO lower bound with a per-route tunable value. The original Kconfig option solved the problem that a very low RTT (in the order of HZ) can trigger too frequent and unnecessary reductions of the sending rate. This tunable does not affect the initial RTO value of 2 seconds specified in RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value, it allows to adapt to network conditions. The same effect as the original Kconfig option of 100ms is now achieved by > ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0 (assuming HZ=1000). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-30dccp ccid-2: Share TCP's minimum RTO codeGerrit Renker1-6/+20
Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2 over 802.11g: at least once per session there was a spurious timeout. It helped to then increase the the value of RTO_MIN over this link. Since the problem is the same as in TCP, this patch makes the solution from commit "05bb1fad1cde025a864a90cfeb98dcbefe78a44a" "[TCP]: Allow minimum RTO to be configurable via routing metrics." available to DCCP. This avoids reinventing the wheel, so that e.g. the following works in the expected way now also for CCID-2: > ip route change 10.0.0.2 rto_min 800 dev ath0 Luckily this useful rto_min function was recently moved to net/tcp.h, which simplifies sharing code originating from TCP. Documentation also updated (plus minor whitespace fixes). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: simplify flags for tx timestampingOliver Hartkopp1-9/+13
This patch removes the abstraction introduced by the union skb_shared_tx in the shared skb data. The access of the different union elements at several places led to some confusion about accessing the shared tx_flags e.g. in skb_orphan_try(). http://marc.info/?l=linux-netdev&m=128084897415886&w=2 Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-11Documentation/networking/wavelan.txt: deleted, not in treeJoe Perches1-74/+0
Commit 1d794e3b353b ("Staging: wavelan: delete the driver") removed the source, so remove the documentation as well. Signed-off-by: Joe Perches <joe@perches.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2-0/+210
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits) igbvf.txt: Add igbvf Documentation igb.txt: Add igb documentation e100/e1000*/igb*/ixgb*: Add missing read memory barrier ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG netxen: protect tx timeout recovery by rtnl lock isdn: gigaset: use after free isdn: gigaset: add missing unlock solos-pci: Fix race condition in tasklet RX handling pkt_sched: Fix sch_sfq vs tcf_bind_filter oops net: disable preemption before call smp_processor_id() tcp: no md5sig option size check bug iwlwifi: fix locking assertions iwlwifi: fix TX tracer isdn: fix information leak net: Fix napi_gro_frags vs netpoll path usbnet: remove noisy and hardly useful printk rtl8180: avoid potential NULL deref in rtl8180_beacon_work ath9k: Remove myself from the MAINTAINERS list libertas: scan before assocation if no BSSID was given libertas: fix association with some APs by using extended rates ...
2010-08-08igbvf.txt: Add igbvf DocumentationJeff Kirsher1-0/+78
Adds documentation for the igbvf (igb virtual function driver). v2: - Removed trailing white space - Removed Ethtool version info Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-08igb.txt: Add igb documentationJeff Kirsher1-0/+132
Add documentation for the igb networking driver. v2: - Removed trailing white space - Removed Ethtool version info - Removed LRO kernel version info Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-06DNS: Fixes for the DNS query moduleDavid Howells1-3/+3
Fixes for the DNS query module, including: (1) Use 'negative' instead of '-ve' in the documentation. (2) Mark the kdoc comment with '/**' on dns_query(). Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-05DNS: Separate out CIFS DNS Resolver codeWang Lei1-0/+146
Separate out the DNS resolver key type from the CIFS filesystem into its own module so that it can be made available for general use, including the AFS filesystem module. This facility makes it possible for the kernel to upcall to userspace to have it issue DNS requests, package up the replies and present them to the kernel in a useful form. The kernel is then able to cache the DNS replies as keys can be retained in keyrings. Resolver keys are of type "dns_resolver" and have a case-insensitive description that is of the form "[<type>:]<domain_name>". The optional <type> indicates the particular DNS lookup and packaging that's required. The <domain_name> is the query to be made. If <type> isn't given, a basic hostname to IP address lookup is made, and the result is stored in the key in the form of a printable string consisting of a comma-separated list of IPv4 and IPv6 addresses. This key type is supported by userspace helpers driven from /sbin/request-key and configured through /etc/request-key.conf. The cifs.upcall utility is invoked for UNC path server name to IP address resolution. The CIFS functionality is encapsulated by the dns_resolve_unc_to_ip() function, which is used to resolve a UNC path to an IP address for CIFS filesystem. This part remains in the CIFS module for now. See the added Documentation/networking/dns_resolver.txt for more information. Signed-off-by: Wang Lei <wang840925@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds16-33/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Documentation: update broken web addresses.Justin P. Mattock16-33/+26
Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-29caif-driver: Add CAIF-SPI Protocol driver.Sjur Braendeland1-0/+208
This patch introduces the CAIF SPI Protocol Driver for CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific SPI device. A general platform driver is not possible as there are no SPI Slave side Kernel API defined. A sample CAIF SPI Platform device can be found in .../Documentation/networking/caif/spi_porting.txt Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17Merge branch 'master' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-16ipw2200: Enable LED by defaultubuntu@tjworld.net1-1/+1
BugLink: http://bugs.launchpad.net/bugs/21367 Enable LED by default and update the MODULE_PARM_DESC. The original reason for defaulting to disabled was documented in 2005 and noted, "The LED code has been reported to hang some systems when running ifconfig and is therefore disabled by default." This no longer appears applicable and users have been requesting this be enabled for several years. Signed-off-by: TJ <ubuntu@tjworld.net> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-11pktgen: increasing transmission granularityDaniel Turull1-0/+5
This patch increases the granularity of the rate generated by pktgen. The previous version of pktgen uses micro seconds (udelay) resolution when it was delayed causing gaps in the rates. It is changed to nanosecond (ndelay). Now any rate is possible. Also it allows to set, the desired rate in Mb/s or packets per second. The documentation has been updated. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-05bonding: allow user-controlled output slave selectionAndy Gospodarek1-2/+82
v2: changed bonding module version, modified to apply on top of changes from previous patch in series, and updated documentation to elaborate on multiqueue awareness that now exists in bonding driver. This patch give the user the ability to control the output slave for round-robin and active-backup bonding. Similar functionality was discussed in the past, but Jay Vosburgh indicated he would rather see a feature like this added to existing modes rather than creating a completely new mode. Jay's thoughts as well as Neil's input surrounding some of the issues with the first implementation pushed us toward a design that relied on the queue_mapping rather than skb marks. Round-robin and active-backup modes were chosen as the first users of this slave selection as they seemed like the most logical choices when considering a multi-switch environment. Round-robin mode works without any modification, but active-backup does require inclusion of the first patch in this series and setting the 'all_slaves_active' flag. This will allow reception of unicast traffic on any of the backup interfaces. This was tested with IPv4-based filters as well as VLAN-based filters with good results. More information as well as a configuration example is available in the patch to Documentation/networking/bonding.txt. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 22:25:34 +0000