Copyright © 2008-2009 Collabora Ltd. Copyright © 2008-2009 Nokia Corporation

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

(as a stable interface)

The channel dispatcher is responsible for responding to new channels and launching client processes to handle them. It also provides functionality for client processes to request that new channels are created.

If a channel dispatcher is running, it is responsible for dispatching new channels on all Connections created by the AccountManager. Connections not created by the AccountManager are outside the scope of the channel dispatcher.

Connections created by standalone Telepathy clients that do not intend to interact with the channel dispatcher should be ignored - otherwise, the channel dispatcher would try to launch handlers for channels that the standalone client was already handling internally.

The current channel dispatcher is defined to be the process that owns the well-known bus name im.telepathy1.ChannelDispatcher on the session bus. This process MUST export an object with this interface at the object path /im/telepathy/ChannelDispatcher.

Until a mechanism exists for making a reasonable automatic choice of ChannelDispatcher implementation, implementations SHOULD NOT register as an activatable service for the ChannelDispatcher's well-known bus name. Instead, it is RECOMMENDED that some component of the user's session will select and activate a particular implementation, and that other Telepathy-enabled programs can detect whether channel request/dispatch functionality is available by checking whether the ChannelDispatcher's well-known name is in use at runtime.

There are three categories of client process defined by this specification:

Observer

Observers monitor the creation of new channels. This functionality can be used for things like message logging. All observers are notified simultaneously.

Approver

Approvers notify the user that new channels have been created, and also select which channel handler will be used for the channel, either by asking the user or by choosing the most appropriate channel handler.

Handler

Each new channel or set of channels is passed to exactly one handler as its final destination. A typical channel handler is a user interface process handling channels of a particular type.

A list of the extra interfaces provided by this channel dispatcher.

Start a request to create a channel. This initially just creates a ChannelRequest object, which can be used to continue the request and track its success or failure.

The request can take a long time - in the worst case, the channel dispatcher has to ask the account manager to put the account online, the account manager has to ask the operating system to obtain an Internet connection, and the operating system has to ask the user whether to activate an Internet connection using an on-demand mechanism like dialup.

This means that using a single D-Bus method call and response to represent the whole request will tend to lead to that call timing out, which is not the behaviour we want.

If this method is called for an Account that is disabled, invalid or otherwise unusable, no error is signalled until ChannelRequest.Proceed is called, at which point ChannelRequest.Failed is emitted with an appropriate error.

This means there's only one code path for errors, apart from InvalidArgument for "that request makes no sense".

It also means that the request will proceed if the account is enabled after calling CreateChannel, but before calling Proceed.

The Account for which the new channel is to be created.

A dictionary containing desirable properties. This has the same semantics as the corresponding parameter to Connection.Interface.Requests.CreateChannel.

Certain properties will not necessarily make sense in this dictionary: for instance, TargetHandle can only be given if the requester is able to interact with a Connection to the desired account.

The time at which user action occurred, or 0 if this channel request is for some reason not involving user action. The UserActionTime property will be set to this value, and it will eventually be passed as the User_Action_Time parameter of HandleChannels.

Either the well-known bus name (starting with im.telepathy1.Client.) of the preferred handler for this channel, or an empty string to indicate that any handler would be acceptable. The channel dispatcher SHOULD dispatch as many as possible of the resulting channels (ideally, all of them) to that handler—irrespective of whether that handler's HandlerChannelFilter matches the channel—and SHOULD remember the preferred handler so it can try to dispatch subsequent channels in the same bundle to the same handler.

This must be the well-known bus name, not the unique name, to ensure that all handlers do indeed have the Client API, and the Client object on the handler can be located easily.

This is partly so the channel dispatcher can call HandleChannels on it, and partly so the channel dispatcher can recover state if it crashes and is restarted.

The filter should be disregarded for ease of use of this interface: clients will usually use this argument to request channels be sent to themself, and this should trump the filter not matching. This also allows a client to become the handler for a channel produced by one of its own requests, while not being a candidate to handle other channels of that type.

If this is a well-known bus name and the handler has the Requests interface, the channel dispatcher SHOULD call AddRequest on that Handler after this method has returned.

This ordering allows a Handler which calls CreateChannel with itself as the preferred handler to associate the call to AddRequest with that call.

This is copied to the ChannelRequest that is returned, as the PreferredHandler property.

Previously, the spec didn't say that this should disregard the handler's filter. This has been implemented since telepathy-mission-control 5.3.2.

Additional information about the channel request, which will be used as the value for the resulting request's Hints property.

See the Hints property's documentation for rationale.

A ChannelRequest object. The Preferred_Handler is syntactically invalid or does not start with im.telepathy1.Client., the Account does not exist, or one of the Requested_Properties is invalid

Start a request to ensure that a channel exists, creating it if necessary. This initially just creates a ChannelRequest object, which can be used to continue the request and track its success or failure.

If this method is called for an Account that is disabled, invalid or otherwise unusable, no error is signalled until ChannelRequest.Proceed is called, at which point ChannelRequest.Failed is emitted with an appropriate error.

The rationale is as for CreateChannel.

The Account for which the new channel is to be created.

A dictionary containing desirable properties. This has the same semantics as the corresponding parameter to Connection.Interface.Requests.EnsureChannel.

Certain properties will not necessarily make sense in this dictionary: for instance, TargetHandle can only be given if the requester is able to interact with a Connection to the desired account.

The time at which user action occurred, or 0 if this channel request is for some reason not involving user action.

This parameter is used in the same way as the corresponding parameter to CreateChannel.

Either the well-known bus name (starting with im.telepathy1.Client.) of the preferred handler for this channel, or an empty string to indicate that any handler would be acceptable. The behaviour and rationale are the same as for the corresponding parameter to CreateChannel, except as noted here.

If any new channels are created in response to this request, the channel dispatcher SHOULD dispatch as many as possible of the resulting channels (ideally, all of them) to that handler, and SHOULD remember the preferred handler so it can try to dispatch subsequent channels in the same bundle to the same handler. If the requested channel already exists (that is, Connection.Interface.Requests.EnsureChannel returns Yours=False) then the channel dispatcher SHOULD re-dispatch the channel to its existing handler, and MUST NOT dispatch it to this client (unless it is the existing handler); the request is still deemed to have succeeded in this case.

An address book application, for example, might call EnsureChannel to ensure that a text channel with a particular contact is displayed to the user; it does not care whether a new channel was made. An IM client might call EnsureChannel in response to the user double-clicking an entry in the contact list, with itself as the Preferred_Handler; if the user already has a conversation with that contact in another application, they would expect the existing window to be presented, rather than their double-click leading to an error message. So the request should succeed, even if its Preferred_Handler is not used.

Additional information about the channel request, which will be used as the value for the resulting request's Hints property. A ChannelRequest object. The Preferred_Handler is syntactically invalid or does not start with im.telepathy1.Client., the Account does not exist, or one of the Requested_Properties is invalid
Implemented since telepathy-mission-control 5.7.12. This method now returns Delegated and Not_Delegated instead of nothing. HandleChannels is now called once per Channel in Channels.

Called by a Handler to redispatch a bunch of channels it is currently handling.

For each Channel in Channels, if another Handler can be found, HandleChannels will be called on it until a Handler accepts it.

This method returns once all the Channels have either been accepted or rejected by Handlers.

If this method fails, the original Handler is still handling the channels.

The list of channels to redispatch. The caller has to be the current Handler of all of these channels

The time at which user action occurred, or 0 if this channels delegation is for some reason not involving user action.

This parameter is used in the same way as the corresponding parameter to CreateChannel.

Either the well-known bus name (starting with im.telepathy1.Client.) of the preferred new handler for these channels, or an empty string to indicate that any handler would be acceptable. The behaviour and rationale are the same as for the corresponding parameter to CreateChannel.

The list of channels which have been delegated; the caller is no longer handling these channels.

The client should remove these channels from its HandledChannels property.

The list of channels which have NOT been delegated; the caller is still handling these channels.

The Preferred_Handler is syntactically invalid or does not start with im.telepathy1.Client.. At least one Channel in Channels is not currently handled by the caller. No Channel has been delegated.
A mapping associating not delegated channel with an error. The path of the channel An error describing why the channel has not be delegated the name of a D-Bus error describing what went wrong. a human-readable informative error message. Implemented since telepathy-mission-control 5.7.12.

Equivalent of calling EnsureChannel with a Requested_Properties which would result in ensuring Channel.

If Channel is handled, its handler will be asked to present it the user (e.g. bring it into the foreground).

The channel to present.

The time at which user action occurred, or 0 if this channel request is for some reason not involving user action.

This parameter is used in the same way as the corresponding parameter to EnsureChannel.

The Account does not exist, the Channel does not exist or it does not belong to the Account.