/* * Copyright (c) 2015 MediaTek Inc. * Author: Chunfeng Yun * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include #include #include #include #include #include #include #include /* * for sifslv2 register, but exclude port's; * relative to USB3_SIF2_BASE base address */ #define SSUSB_SIFSLV_SPLLC 0x0000 /* offsets of sub-segment in each port registers */ #define SSUSB_SIFSLV_U2PHY_COM_BASE 0x0000 #define SSUSB_SIFSLV_U3PHYD_BASE 0x0100 #define SSUSB_USB30_PHYA_SIV_B_BASE 0x0300 #define SSUSB_SIFSLV_U3PHYA_DA_BASE 0x0400 #define U3P_USBPHYACR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0000) #define PA0_RG_U2PLL_FORCE_ON BIT(15) #define U3P_USBPHYACR2 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0008) #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18) #define U3P_USBPHYACR5 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0014) #define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12) #define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12) #define PA5_RG_U2_HS_100U_U3_EN BIT(11) #define U3P_USBPHYACR6 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0018) #define PA6_RG_U2_ISO_EN BIT(31) #define PA6_RG_U2_BC11_SW_EN BIT(23) #define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20) #define PA6_RG_U2_SQTH GENMASK(3, 0) #define PA6_RG_U2_SQTH_VAL(x) (0xf & (x)) #define U3P_U2PHYACR4 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0020) #define P2C_RG_USB20_GPIO_CTL BIT(9) #define P2C_USB20_GPIO_MODE BIT(8) #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE) #define U3D_U2PHYDCR0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0060) #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24) #define U3P_U2PHYDTM0 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x0068) #define P2C_FORCE_UART_EN BIT(26) #define P2C_FORCE_DATAIN BIT(23) #define P2C_FORCE_DM_PULLDOWN BIT(21) #define P2C_FORCE_DP_PULLDOWN BIT(20) #define P2C_FORCE_XCVRSEL BIT(19) #define P2C_FORCE_SUSPENDM BIT(18) #define P2C_FORCE_TERMSEL BIT(17) #define P2C_RG_DATAIN GENMASK(13, 10) #define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10) #define P2C_RG_DMPULLDOWN BIT(7) #define P2C_RG_DPPULLDOWN BIT(6) #define P2C_RG_XCVRSEL GENMASK(5, 4) #define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4) #define P2C_RG_SUSPENDM BIT(3) #define P2C_RG_TERMSEL BIT(2) #define P2C_DTM0_PART_MASK \ (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \ P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \ P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL) #define U3P_U2PHYDTM1 (SSUSB_SIFSLV_U2PHY_COM_BASE + 0x006C) #define P2C_RG_UART_EN BIT(16) #define P2C_RG_VBUSVALID BIT(5) #define P2C_RG_SESSEND BIT(4) #define P2C_RG_AVALID BIT(2) #define U3P_U3_PHYA_REG0 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0000) #define P3A_RG_U3_VUSB10_ON BIT(5) #define U3P_U3_PHYA_REG6 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0018) #define P3A_RG_TX_EIDLE_CM GENMASK(31, 28) #define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28) #define U3P_U3_PHYA_REG9 (SSUSB_USB30_PHYA_SIV_B_BASE + 0x0024) #define P3A_RG_RX_DAC_MUX GENMASK(5, 1) #define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1) #define U3P_U3PHYA_DA_REG0 (SSUSB_SIFSLV_U3PHYA_DA_BASE + 0x0000) #define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10) #define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10) #define U3P_PHYD_CDR1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x005c) #define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24) #define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24) #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) #define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) #define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018) #define XC3_RG_U3_XTAL_RX_PWD BIT(9) #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) struct mt65xx_phy_instance { struct phy *phy; void __iomem *port_base; u32 index; u8 type; }; struct mt65xx_u3phy { struct device *dev; void __iomem *sif_base; /* include sif2, but exclude port's */ struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */ struct mt65xx_phy_instance **phys; int nphys; }; static void phy_instance_init(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { void __iomem *port_base = instance->port_base; u32 index = instance->index; u32 tmp; /* switch to USB function. (system register, force ip into usb mode) */ tmp = readl(port_base + U3P_U2PHYDTM0); tmp &= ~P2C_FORCE_UART_EN; tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0); writel(tmp, port_base + U3P_U2PHYDTM0); tmp = readl(port_base + U3P_U2PHYDTM1); tmp &= ~P2C_RG_UART_EN; writel(tmp, port_base + U3P_U2PHYDTM1); if (!index) { tmp = readl(port_base + U3P_U2PHYACR4); tmp &= ~P2C_U2_GPIO_CTR_MSK; writel(tmp, port_base + U3P_U2PHYACR4); tmp = readl(port_base + U3P_USBPHYACR2); tmp |= PA2_RG_SIF_U2PLL_FORCE_EN; writel(tmp, port_base + U3P_USBPHYACR2); tmp = readl(port_base + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, port_base + U3D_U2PHYDCR0); } else { tmp = readl(port_base + U3D_U2PHYDCR0); tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, port_base + U3D_U2PHYDCR0); tmp = readl(port_base + U3P_U2PHYDTM0); tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; writel(tmp, port_base + U3P_U2PHYDTM0); } tmp = readl(port_base + U3P_USBPHYACR6); tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */ tmp &= ~PA6_RG_U2_SQTH; tmp |= PA6_RG_U2_SQTH_VAL(2); writel(tmp, port_base + U3P_USBPHYACR6); tmp = readl(port_base + U3P_U3PHYA_DA_REG0); tmp &= ~P3A_RG_XTAL_EXT_EN_U3; tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2); writel(tmp, port_base + U3P_U3PHYA_DA_REG0); tmp = readl(port_base + U3P_U3_PHYA_REG9); tmp &= ~P3A_RG_RX_DAC_MUX; tmp |= P3A_RG_RX_DAC_MUX_VAL(4); writel(tmp, port_base + U3P_U3_PHYA_REG9); tmp = readl(port_base + U3P_U3_PHYA_REG6); tmp &= ~P3A_RG_TX_EIDLE_CM; tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe); writel(tmp, port_base + U3P_U3_PHYA_REG6); tmp = readl(port_base + U3P_PHYD_CDR1); tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1); tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); writel(tmp, port_base + U3P_PHYD_CDR1); dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); } static void phy_instance_power_on(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { void __iomem *port_base = instance->port_base; u32 index = instance->index; u32 tmp; if (!index) { /* Set RG_SSUSB_VUSB10_ON as 1 after VUSB10 ready */ tmp = readl(port_base + U3P_U3_PHYA_REG0); tmp |= P3A_RG_U3_VUSB10_ON; writel(tmp, port_base + U3P_U3_PHYA_REG0); } /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */ tmp = readl(port_base + U3P_U2PHYDTM0); tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL); tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK); writel(tmp, port_base + U3P_U2PHYDTM0); /* OTG Enable */ tmp = readl(port_base + U3P_USBPHYACR6); tmp |= PA6_RG_U2_OTG_VBUSCMP_EN; writel(tmp, port_base + U3P_USBPHYACR6); if (!index) { tmp = readl(u3phy->sif_base + U3P_XTALCTL3); tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD; writel(tmp, u3phy->sif_base + U3P_XTALCTL3); /* [mt8173]disable Change 100uA current from SSUSB */ tmp = readl(port_base + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HS_100U_U3_EN; writel(tmp, port_base + U3P_USBPHYACR5); } tmp = readl(port_base + U3P_U2PHYDTM1); tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID; tmp &= ~P2C_RG_SESSEND; writel(tmp, port_base + U3P_U2PHYDTM1); /* USB 2.0 slew rate calibration */ tmp = readl(port_base + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HSTX_SRCTRL; tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(4); writel(tmp, port_base + U3P_USBPHYACR5); if (index) { tmp = readl(port_base + U3D_U2PHYDCR0); tmp |= P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, port_base + U3D_U2PHYDCR0); tmp = readl(port_base + U3P_U2PHYDTM0); tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM; writel(tmp, port_base + U3P_U2PHYDTM0); } dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); } static void phy_instance_power_off(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { void __iomem *port_base = instance->port_base; u32 index = instance->index; u32 tmp; tmp = readl(port_base + U3P_U2PHYDTM0); tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN); tmp |= P2C_FORCE_SUSPENDM; writel(tmp, port_base + U3P_U2PHYDTM0); /* OTG Disable */ tmp = readl(port_base + U3P_USBPHYACR6); tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN; writel(tmp, port_base + U3P_USBPHYACR6); if (!index) { /* (also disable)Change 100uA current switch to USB2.0 */ tmp = readl(port_base + U3P_USBPHYACR5); tmp &= ~PA5_RG_U2_HS_100U_U3_EN; writel(tmp, port_base + U3P_USBPHYACR5); } /* let suspendm=0, set utmi into analog power down */ tmp = readl(port_base + U3P_U2PHYDTM0); tmp &= ~P2C_RG_SUSPENDM; writel(tmp, port_base + U3P_U2PHYDTM0); udelay(1); tmp = readl(port_base + U3P_U2PHYDTM1); tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID); tmp |= P2C_RG_SESSEND; writel(tmp, port_base + U3P_U2PHYDTM1); if (!index) { tmp = readl(port_base + U3P_U3_PHYA_REG0); tmp &= ~P3A_RG_U3_VUSB10_ON; writel(tmp, port_base + U3P_U3_PHYA_REG0); } else { tmp = readl(port_base + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, port_base + U3D_U2PHYDCR0); } dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); } static void phy_instance_exit(struct mt65xx_u3phy *u3phy, struct mt65xx_phy_instance *instance) { void __iomem *port_base = instance->port_base; u32 index = instance->index; u32 tmp; if (index) { tmp = readl(port_base + U3D_U2PHYDCR0); tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON; writel(tmp, port_base + U3D_U2PHYDCR0); tmp = readl(port_base + U3P_U2PHYDTM0); tmp &= ~P2C_FORCE_SUSPENDM; writel(tmp, port_base + U3P_U2PHYDTM0); } } static int mt65xx_phy_init(struct phy *phy) { struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); int ret; ret = clk_prepare_enable(u3phy->u3phya_ref); if (ret) { dev_err(u3phy->dev, "failed to enable u3phya_ref\n"); return ret; } phy_instance_init(u3phy, instance); return 0; } static int mt65xx_phy_power_on(struct phy *phy) { struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); phy_instance_power_on(u3phy, instance); return 0; } static int mt65xx_phy_power_off(struct phy *phy) { struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); phy_instance_power_off(u3phy, instance); return 0; } static int mt65xx_phy_exit(struct phy *phy) { struct mt65xx_phy_instance *instance = phy_get_drvdata(phy); struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); phy_instance_exit(u3phy, instance); clk_disable_unprepare(u3phy->u3phya_ref); return 0; } static struct phy *mt65xx_phy_xlate(struct device *dev, struct of_phandle_args *args) { struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev); struct mt65xx_phy_instance *instance = NULL; struct device_node *phy_np = args->np; int index; if (args->args_count != 1) { dev_err(dev, "invalid number of cells in 'phy' property\n"); return ERR_PTR(-EINVAL); } for (index = 0; index < u3phy->nphys; index++) if (phy_np == u3phy->phys[index]->phy->dev.of_node) { instance = u3phy->phys[index]; break; } if (!instance) { dev_err(dev, "failed to find appropriate phy\n"); return ERR_PTR(-EINVAL); } instance->type = args->args[0]; if (!(instance->type == PHY_TYPE_USB2 || instance->type == PHY_TYPE_USB3)) { dev_err(dev, "unsupported device type: %d\n", instance->type); return ERR_PTR(-EINVAL); } return instance->phy; } static struct phy_ops mt65xx_u3phy_ops = { .init = mt65xx_phy_init, .exit = mt65xx_phy_exit, .power_on = mt65xx_phy_power_on, .power_off = mt65xx_phy_power_off, .owner = THIS_MODULE, }; static int mt65xx_u3phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct device_node *child_np; struct phy_provider *provider; struct resource *sif_res; struct mt65xx_u3phy *u3phy; struct resource res; int port, retval; u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); if (!u3phy) return -ENOMEM; u3phy->nphys = of_get_child_count(np); u3phy->phys = devm_kcalloc(dev, u3phy->nphys, sizeof(*u3phy->phys), GFP_KERNEL); if (!u3phy->phys) return -ENOMEM; u3phy->dev = dev; platform_set_drvdata(pdev, u3phy); sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); u3phy->sif_base = devm_ioremap_resource(dev, sif_res); if (IS_ERR(u3phy->sif_base)) { dev_err(dev, "failed to remap sif regs\n"); return PTR_ERR(u3phy->sif_base); } u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); if (IS_ERR(u3phy->u3phya_ref)) { dev_err(dev, "error to get u3phya_ref\n"); return PTR_ERR(u3phy->u3phya_ref); } port = 0; for_each_child_of_node(np, child_np) { struct mt65xx_phy_instance *instance; struct phy *phy; instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL); if (!instance) { retval = -ENOMEM; goto put_child; } u3phy->phys[port] = instance; phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops); if (IS_ERR(phy)) { dev_err(dev, "failed to create phy\n"); retval = PTR_ERR(phy); goto put_child; } retval = of_address_to_resource(child_np, 0, &res); if (retval) { dev_err(dev, "failed to get address resource(id-%d)\n", port); goto put_child; } instance->port_base = devm_ioremap_resource(&phy->dev, &res); if (IS_ERR(instance->port_base)) { dev_err(dev, "failed to remap phy regs\n"); retval = PTR_ERR(instance->port_base); goto put_child; } instance->phy = phy; instance->index = port; phy_set_drvdata(phy, instance); port++; } provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate); return PTR_ERR_OR_ZERO(provider); put_child: of_node_put(child_np); return retval; } static const struct of_device_id mt65xx_u3phy_id_table[] = { { .compatible = "mediatek,mt8173-u3phy", }, { }, }; MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table); static struct platform_driver mt65xx_u3phy_driver = { .probe = mt65xx_u3phy_probe, .driver = { .name = "mt65xx-u3phy", .of_match_table = mt65xx_u3phy_id_table, }, }; module_platform_driver(mt65xx_u3phy_driver); MODULE_AUTHOR("Chunfeng Yun "); MODULE_DESCRIPTION("mt65xx USB PHY driver"); MODULE_LICENSE("GPL v2");