summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2014-10-22USB: serial: keyspan_pda: fix Entrega company name spellingMark Knibbs2-10/+10
Entrega is misspelled as Entregra or Entrgra, so fix that. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22USB: kobil_sct: Remove unused transfer buffer allocsPeter Hurley1-15/+0
Commit 90419cfcb5d9c889b10dc51363c56a4d394d670e, "USB: kobil_sct: fix control requests without data stage", removed the bogus data buffer arguments, but still allocate transfer buffers which are not used. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22USB: option: add Haier CE81B CDMA modemDan Williams1-0/+2
Port layout: 0: QCDM/DIAG 1: NMEA 2: AT 3: AT/PPP Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22usb: option: add support for Telit LE910Daniele Palmas1-0/+8
Add VID/PID for Telit LE910 modem. Interfaces description is almost the same than LE920, except that the qmi interface is number 2 (instead than 5). Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22usb: serial: ftdi_sio: add Awinda Station and Dongle productsFrans Klaver2-1/+7
Add new IDs for the Xsens Awinda Station and Awinda Dongle. While at it, order the definitions by PID and add a logical separation between devices using Xsens' VID and those using FTDI's VID. Cc: <stable@vger.kernel.org> Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-22USB: serial: cp210x: add Silicon Labs 358x VID and PIDNathaniel Ting1-0/+1
Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now connect to host PCs over a USB serial link. Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-08Merge tag 'tty-3.18-rc1' of ↵Linus Torvalds3-18/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelogs. All have been in the linux-next tree for a while" * tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits) Revert "serial/core: Initialize the console pm state" tty: serial: 8250: use 32bit variable for rpm_tx_active tty: serial: msm: Add earlycon support serial/core: Initialize the console pm state serial: asc: Conditionally use readl_relaxed (COMPILE_TEST) serial: of-serial: add PM suspend/resume support m68k: AMIGA_BUILTIN_SERIAL should depend on TTY asm/uapi: Add definition of TIOC[SG]RS485 tty/metag_da: Add console_poll module parameter serial: 8250_pci: remove rts_n override from Baytrail quirk serial: cadence: Add generic earlycon support serial: imx: change the wait even to interruptiable serial: imx: terminate the RX DMA when the UART is suspending serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control serial: 8250: Add Quark X1000 to 8250_pci.c tty: omap-serial: pull out calculation from baud_is_mode16 tty: omap-serial: fix division by zero xen_hvc: no reason to write the type key on xenstore tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() ...
2014-09-25Merge tag 'usb-serial-3.17-final' of ↵Greg Kroah-Hartman1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for v3.17 Here are two more device IDs for v3.17. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-23usb: serial: Remove unused tty->hw_stoppedPeter Hurley3-18/+3
The tty core does not test tty->hw_stopped; remove from drivers which don't test it themselves. Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22USB: cp210x: add support for Seluxit USB dongleAndreas Bomholtz1-0/+1
Added the Seluxit ApS USB Serial Dongle to cp210x driver. Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-22USB: serial: cp210x: added Ketra N1 wireless interface supportJoe Savage1-0/+1
Added support for Ketra N1 wireless interface, which uses the Silicon Labs' CP2104 USB to UART bridge with customized PID 8946. Signed-off-by: Joe Savage <joe.savage@goketra.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-15USB: serial: remove zte_ev driverJohan Hovold4-315/+10
The zte_ev driver is based on code (once) distributed by ZTE that still appears to originally have been reverse-engineered and bolted onto the generic driver. A closer analysis of the zte_ev setup code reveals that it consists of standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE) but unfortunately fails to get some of those right. In particular, as reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears that the control requests lack the interface argument. Since line control is already handled properly by the option driver, and the SET/GET_LINE_CODING requests appears to be redundant (amounts to a SET 9600 8N1) let's remove the redundant zte_ev driver. Also move the remaining ZTE PIDs to the generic option modem driver. Reported-by: Lei Liu <liu.lei78@zte.com.cn> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-15Merge tag 'v3.17-rc5' into usb-nextJohan Hovold4-2/+30
USB fixes in Linux 3.17-rc5 are needed to build on top of for 3.18. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-08USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker deviceTaylor Braun-Jones2-0/+8
Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-04usb: serial: xsens_mt: always bind to interface number 1Frans Klaver1-19/+4
Probe is testing if the current interface provides two bulk endpoints. While this achieves the goal of only binding to the correct interface, we already know we can find the device on interface number 1. Stop checking the endpoints and just return successfully when interface number 1 is probed. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-04usb: serial: xsens_mt: add author and descriptionFrans Klaver1-0/+2
Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: serial: add Medtronic CareLink USB driverJohan Hovold2-0/+8
Add simple driver for Medtronic CareLink USB devices. Reported-by: Benjamin West <bewest@gmail.com> Tested-by: Benjamin West <bewest@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: serial: add Novatel Wireless GPS driverJohan Hovold2-0/+8
Add simple driver for Novatel Wireless GPS receivers. Reported-by: Kirk Madsen <kirkm@Navsys.com> Tested-by: Kirk Madsen <kirkm@Navsys.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: serial: add support for multi-port simple driversJohan Hovold1-2/+3
Add support for multi-port simple drivers. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: pl2303: use divisors for unsupported baud ratesLauri Hintsala1-6/+7
Use direct method for supported baud rates, otherwise use divisors. Limit baud rate to 12 Mbaud with HX type. This change has been tested to work with PL-2303HX at 115200, 500000, 1000000, 2000000, 2500000, 3000000 and 4000000 baud rates. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: sierra: add 1199:68AA device IDBjørn Mork1-0/+3
This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Cc: <stable@vger.kernel.org> Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: sierra: avoid CDC class functions on "68A3" devicesBjørn Mork1-2/+4
Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: ftdi_sio: add support for NOVITUS Bono E thermal printerJohan Hovold2-0/+7
Add device id for NOVITUS Bono E thermal printer. Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: zte_ev: fix removed PIDsJohan Hovold1-0/+8
Add back some PIDs that were mistakingly remove when reverting commit 73228a0538a7 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c06e3c ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by: Lei Liu <lei35151@163.com> Cc: stable <stable@vger.kernel.org>
2014-08-27USB: serial: fix potential heap buffer overflowJohan Hovold1-0/+5
Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential stack buffer overflowJohan Hovold1-10/+22
Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-24USB: whiteheat: Added bounds checking for bulk command responseJames Forshaw1-1/+6
This patch fixes a potential security issue in the whiteheat USB driver which might allow a local attacker to cause kernel memory corrpution. This is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On EHCI and XHCI busses it's possible to craft responses greater than 64 bytes leading a buffer overflow. Signed-off-by: James Forshaw <forshaw@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-18USB: ftdi_sio: Added PID for new ekey deviceJaša Bartelj2-0/+7
Added support to the ftdi_sio driver for ekey Converter USB which uses an FT232BM chip. Signed-off-by: Jaša Bartelj <jasa.bartelj@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: serial: pl2303: add device id for ztek deviceGreg KH2-0/+2
This adds a new device id to the pl2303 driver for the ZTEK device. Reported-by: Mike Chu <Mike-Chu@prolific.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PIDJohan Hovold2-0/+3
Add device id for Basic Micro ATOM Nano USB2Serial adapters. Reported-by: Nicolas Alt <n.alt@mytum.de> Tested-by: Nicolas Alt <n.alt@mytum.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: zte_ev: remove duplicate Qualcom PIDJohan Hovold1-1/+0
Remove dublicate Qualcom PID 0x3197 which is already handled by the moto-modem driver since commit 6986a978eec7 ("USB: add new moto_modem driver for some Morotola phones"). Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver") Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: zte_ev: remove duplicate Gobi PIDJohan Hovold1-1/+0
Remove dublicate Gobi PID 0x9008 which is already handled by the qcserial driver since commit f05932c0caf4 ("USB: qcserial: Add extra device IDs"). Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver") Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"Johan Hovold2-21/+21
This reverts commit 73228a0538a7 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"). Move the IDs of the devices that were previously driven by the option driver back to that driver. As several users have reported, the zte_ev driver is causing random disconnects as well as reconnect failures. A closer analysis of the zte_ev setup code reveals that it consists of standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE) but unfortunately fails to get some of those right. In particular, as reported by Liu Lei, it fails to lower DTR/RTS on close. It also appears that the control requests lack the interface argument. Note that the zte_ev driver is based on code (once) distributed by ZTE that still appears to originally have been reverse-engineered and bolted onto the generic driver. Since line control is already handled properly by the option driver, and the SET/GET_LINE_CODING requests appears to be redundant (amounts to a SET 9600 8N1), this is a first step in ultimately removing the redundant zte_ev driver. Note that AC2726 had already been moved back to option, and that some IDs were in the device table of both drivers prior to the commit being reverted. Reported-by: Lei Liu <liu.lei78@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: option: add VIA Telecom CDS7 chipset device idBrennan Ashton1-0/+5
This VIA Telecom baseband processor is used is used by by u-blox in both the FW2770 and FW2760 products and may be used in others as well. This patch has been tested on both of these modem versions. Signed-off-by: Brennan Ashton <bashton@brennanashton.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-18USB: option: reduce interrupt-urb logging verbosityJohan Hovold1-0/+2
Do not log normal interrupt-urb shutdowns as errors. The option driver has always been logging any nonzero interrupt-urb status as an error, including when the urb is killed during normal operation. Commit 9096f1fbba91 ("USB: usb_wwan: fix potential NULL-deref at resume") moved the interrupt urb submission from port probe and release to open and close, thus potentially increasing the number of these false-positive error messages dramatically. Reported-by: Ed Butler <ressy66@ausics.net> Tested-by: Ed Butler <ressy66@ausics.net> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-01USB: serial: ftdi_sio: Add support for new Xsens devicesPatrick Riphagen2-0/+5
This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01USB: serial: ftdi_sio: Annotate the current Xsens PID assignmentsPatrick Riphagen1-5/+5
The converters are used in specific products. It can be useful to know which they are exactly. Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17USB: serial: cp210x: Removing unncessary `usb_reset_device` on startupPreston Fick1-3/+0
This `usb_reset_device` command has been around since the driver was originally reverse engineered. It doesn't cause much issue on single interface CP210x devices, but on the CP2105 and CP2108 with 2 and 4 interfaces respectively it will cause instability on enumeration and delays enumeration noticably. There should be no reason to reset a device at startup, per the CP210x AN571 spec. Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-16Merge tag 'usb-serial-3.17-rc1' of ↵Greg Kroah-Hartman1-59/+23
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.17-rc1 Here are some minor fixes and clean-ups to the ftdi_sio, mos7840 and kl5kusb105 drivers for v3.17-rc1. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-13Merge 3.16-rc5 into usb-nextGreg Kroah-Hartman4-2/+15
We want those fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka2-0/+8
This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09USB: ftdi_sio: Add extra PID.Bert Vermeulen2-2/+4
This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09drivers/usb/serial/mos7840.c: remove unnecessary null test before kfreeFabian Frederick1-4/+1
Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09USB: kl5kusb105: Remove klsi_105_tiocmset functionPeter Senna Tschudin1-30/+0
This patch remove the function klsi_105_tiocmset which was only returning -EINVAL. It also removes the function prototype and the .tiocmset entry in the struct usb_serial_driver. Verified by compilation only. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07USB: kl5kusb105: Remove klsi_105_tiocmset functionPeter Senna Tschudin1-30/+0
This patch remove the function klsi_105_tiocmset which was only returning -EINVAL. It also removes the function prototype and the .tiocmset entry in the struct usb_serial_driver. Verified by compilation only. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07usb: option: Add ID for Telewell TW-LTE 4G v2Bernd Wachter1-0/+2
Add ID of the Telewell 4G v2 hardware to option driver to get legacy serial interface working Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: cp210x: add support for Corsair usb dongleAndras Kovacs1-0/+1
Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs <andras@sth.sze.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: mos7840: remove unnecessary null test before kfreeFabian Frederick1-4/+1
Cc: Johan Hovold <jhovold@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: ftdi_sio: remove redundant mtxorb quirkJohan Hovold1-39/+8
Remove redundant mtxorb quirk used to fix up incorrect wMaxPacketSize, which was added before 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size calculation") which does the same thing for all devices. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-07-07USB: ftdi_sio: clean up ftdi_set_max_packet_size()Johan Hovold1-11/+13
Code and comment style clean ups of ftdi_set_max_packet_size(). Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 20:15:00 +0000