summaryrefslogtreecommitdiff
path: root/drivers/pcmcia/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2015-03-11Revert "pcmcia: add a new resource manager for non ISA systems"Greg Kroah-Hartman1-1/+0
This reverts commit 02b03846bb2befc558bfd0665749d6bb26f4c2f1. Alan writes: it seems there is a regression in there for some configuration of I/O based devices. I'll take a look at it over the next couple of kernel releases and see what is up then resubmit it with fixes. Reported-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12pcmcia: add a new resource manager for non ISA systemsAlan Cox1-0/+1
On a pure PCI platform we don't actually need all the complexity of the rsrc_nonstatic manager, in fact we can just work directly with the pci allocators and avoid all the complexity (and code bloat). Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-07Merge branch 'next' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc new goodies for 3.17. The short story: The biggest bit is Michael removing all of pre-POWER4 processor support from the 64-bit kernel. POWER3 and rs64. This gets rid of a ton of old cruft that has been bitrotting in a long while. It was broken for quite a few versions already and nobody noticed. Nobody uses those machines anymore. While at it, he cleaned up a bunch of old dusty cabinets, getting rid of a skeletton or two. Then, we have some base VFIO support for KVM, which allows assigning of PCI devices to KVM guests, support for large 64-bit BARs on "powernv" platforms, support for HMI (Hardware Management Interrupts) on those same platforms, some sparse-vmemmap improvements (for memory hotplug), There is the usual batch of Freescale embedded updates (summary in the merge commit) and fixes here or there, I think that's it for the highlights" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits) powerpc/eeh: Export eeh_iommu_group_to_pe() powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API powerpc: Reduce scariness of interrupt frames in stack traces powerpc: start loop at section start of start in vmemmap_populated() powerpc: implement vmemmap_free() powerpc: implement vmemmap_remove_mapping() for BOOK3S powerpc: implement vmemmap_list_free() powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE powerpc/book3s: Fix endianess issue for HMI handling on napping cpus. powerpc/book3s: handle HMIs for cpus in nap mode. powerpc/powernv: Invoke opal call to handle hmi. powerpc/book3s: Add basic infrastructure to handle HMI in Linux. powerpc/iommu: Fix comments with it_page_shift powerpc/powernv: Handle compound PE in config accessors powerpc/powernv: Handle compound PE for EEH powerpc/powernv: Handle compound PE powerpc/powernv: Split ioda_eeh_get_state() powerpc/powernv: Allow to freeze PE powerpc/powernv: Enable M64 aperatus for PHB3 powerpc/eeh: Aux PE data for error log ...
2014-07-09pcmcia: sa1100: H3100 and H3600 share a driverArnd Bergmann1-0/+1
When building a iPAQ H3100-only kernel with PCMCIA enabled, we get this build error: ERROR: "pcmcia_h3600_init" [drivers/pcmcia/sa1100_cs.ko] undefined! The defconfig normally works fine because it enables both H3100 and H3600 support. This patch fixes the Makefile to build the driver if at least one of the two machines are selected. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-25pcmcia: Remove m8xx_pcmcia driverScott Wood1-1/+0
This driver doesn't build, and apparently has not built since arch/ppc was removed in 2008 (when mk_int_int_mask was removed from asm/irq.h, among other build errors). A few weeks ago I asked whether anyone was actively maintaining this code, and got no positive response: http://patchwork.ozlabs.org/patch/352082/ So, let's remove it. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: linux-pcmcia@lists.infradead.org Cc: Paul Bolle <pebolle@tiscali.nl>
2012-05-07pcmcia: add driver for hx4700Paul Parsons1-0/+1
This patch adds support for the HP iPAQ hx4700 to the existing pxa2xx-pcmcia driver. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-21PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.Russell King1-4/+4
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: make lubbock socket driver part of sa1111_csRussell King1-2/+1
Lubbock is just another SA1111 socket driver, so now that Kconfig has better control of which files get built, we can sanitize the build for this. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: add Kconfig control for building sa11xx_base.cRussell King1-2/+3
sa11xx_base.c is currently built when either PCMCIA_SA1100 or PCMCIA_SA1111 are selected. Let's move the logic into Kconfig. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-07MIPS: Alchemy: remove PB1000 supportManuel Lauss1-4/+0
Noone seems to have test hardware or care anymore. Drop PB1000 support and along with it the old Alchemy PCMCIA socket driver. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/2881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-06Merge branch 'devel-stable' into develRussell King1-0/+2
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2010-12-21ARM: 6458/1: pcmcia: Adds nanoEngine PCMCIA support.Marcelo Roberto Jimenez1-1/+2
This patch adds nanoEngine PCMCIA support, with support for two sockets. In order to have a fully functional pcmcia subsystem in a BSE nanoEngine board you should carefully read this: http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/ Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: pxa: Colibri PXA320 PCMCIA driverMarek Vasut1-0/+1
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Toradex Colibri PXA270 CF supportMarek Vasut1-0/+1
This driver also contains structures to eventually support PXA320. This is planned to be added in a later patch. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King1-0/+1
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-05[ARM] pxa/balloon3: PCMCIA SupportMarek Vasut1-0/+1
This driver adds support for the on-board CF socket. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-07-30pcmcia: remove obsolete ioctlDominik Brodowski1-1/+0
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-3/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-11[ARM] pxa: add support for Voipac PXA270 PCMCIAMarek Vasut1-0/+1
PCMCIA support for Voipac PXA270 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-10pcmcia: move all pcmcia_resource_ops providers into one moduleDominik Brodowski1-2/+5
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: move high level CIS access code to separate fileDominik Brodowski1-1/+1
No code changes. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-9/+3
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss1-1/+2
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss1-8/+1
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-17pcmcia: move cistpl.c into pcmcia moduleDominik Brodowski1-2/+2
As PCMCIA is the only real user of CIS access functions, include cistpl.c in the PCMCIA module, not in the PCMCIA & CardBus core module. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-12-13[ARM] pxa/zeus: make Viper pcmcia support more generic to support ZeusMarc Zyngier1-1/+1
The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-09PCMCIA: soc_common: convert to a stand alone moduleRussell King - ARM Linux1-6/+4
Convert soc_common.c to be a stand alone module, rather than wrapping it up into the individual SoC specific base modules. In doing this, we need to add init/exit functions for soc_common to register/remove the cpufreq notifier. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-09-30MIPS: BCM63xx: Add PCMCIA & Cardbus support.Maxime Bizon1-0/+1
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-10[ARM] pxa: Palm Tungsten|C PCMCIA supportMarek Vasut1-0/+1
This patch adds support for PCMCIA socket found in Palm Tungsten|C. There is Prism3 based WiFi card hardwired to that socket. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05[ARM] pxa/stargate2: add support for Compact Flash/PCMCIAJonathan Cameron1-0/+1
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-15[PCMCIA] e740 PCMCIA socket driver.Ian Molton1-0/+1
This patch adds the platform specific support needed to control the PCMCIA hardware on the Toshiba e740. Signed-off-by: Ian Molton <spyro@f2s.com>
2008-10-28sh: Kill off long-dead HD64465 cchip support.Paul Mundt1-1/+0
This code has been dead for many years. The last update it received was in 2003 in order to update it for the driver model changes, though it had already been in disarray and unused before that point. The only boards that ever used this chip have not had users in many years either, so it is finally safe to just kill it off and move on with life. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-17[ARM] pxa: fix trizeps PCMCIA buildRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15[ARM] 5307/1: pxa: fix CM-X2XX PCMCIA build errorMike Rapoport1-1/+2
Fix build error introduced by commit 27c4cae28148ad97baa2bf8275f7ebc9e2c37c34 [ARM] pxa: allow multi-machine PCMCIA builds MODPOST 76 modules ERROR: "cmx270_pcmcia_exit" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined! ERROR: "cmx255_pcmcia_exit" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined! ERROR: "cmx270_pcmcia_init" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined! ERROR: "cmx255_pcmcia_init" [drivers/pcmcia/pxa2xx_cm_x2xx.ko] undefined! make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-4/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-07[ARM] pxa: allow multi-machine PCMCIA buildsRussell King1-9/+11
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-armRussell King1-1/+1
Merge branch 'pxa-viper' into pxa-machines Conflicts: arch/arm/mach-pxa/Makefile drivers/pcmcia/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King1-1/+2
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-trizeps' into pxa-machinesRussell King1-0/+1
Conflicts: drivers/pcmcia/Makefile
2008-10-07[ARM] 5283/1: pxa: add CM-X255 pcmcia supportMike Rapoport1-1/+1
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5294/1: Trizeps4 PCMCIA supportJürgen Schindele1-0/+1
Support for Trizeps4 SOM PCMCIA with ConXS or other baseboards. with double GPIO-free fixed (sorry!) replaces 5279/1 Signed-off-by: Jurgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09Add support for the Arcom/Eurotech Viper SBC CompactFlash card slotMarc Zyngier1-0/+1
The Arcom/Eurotech Viper needs some extra care to run. On this board, the PC104 connector is actually wired to the second PCMCIA slot. Therefore, this second socket needs to be enabled, despite not being managed by the PCMCIA code. I'd rather have the MECR setup in the platform support code so I could, for example, use the PC104 bus without having the PCMCIA module loaded. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-08-23pcmcia: don't add extra DEBUG cflagDominik Brodowski1-4/+0
Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks work properly. (includes bugfixes from and Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> ) Signed-off-by: Dominik Broodwski <linux@dominikbrodowski.net>
2008-08-16[ARM] 5199/1: PalmLD: PCMCIA driverMarek Vašut1-1/+2
PCMCIA driver for Palm LifeDrive Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+1
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-10[ARM] 5154/1: PalmTX PCMCIAMarek Vašut1-0/+1
This patch adds PCMCIA support for PalmTX handheld computer. There is one chip hard-soldered to slot0, another slot is not in use and not accessible. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-24pcmcia: add support CompactFlash PCMCIA support for Blackfin.Michael Hennerich1-0/+1
A new host driver to add CompactFlash PCMCIA support for Blackfin. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2007-10-17pcmcia: CompactFlash driver for PA Semi Electra boardsOlof Johansson1-0/+1
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's a simple device sitting on localbus, with interrupts and detect/voltage control over GPIO. The driver is implemented as an of_platform driver, and adds localbus as a bus being probed by the of_platform framework. [akpm@linux-foundation.org: cleanups] [olof@lixom.net: fix build] Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@infradead.org> Cc: Milton Miller <miltonm@bga.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15[ARM] 4578/1: CM-x270: PCMCIA supportMike Rapoport1-0/+1
This patch provides support for PCMCIA on CM-X270 Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-31[PATCH] pcmcia: AT91RM9200 Compact Flash driverAndrew Victor1-0/+1
This patch adds support for the Compact Flash controller integrated in the Atmel AT91RM9200 processor. Signed-off-by: Andrew Victor <andrew@sanpeople.com Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 11:05:20 +0000