summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2016-03-18Merge tag 'mfd-for-linus-4.6' of ↵Linus Torvalds28-261/+1021
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ...
2016-03-17Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds7-605/+199
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
2016-03-16mfd: intel-lpss: Pass I2C configuration via properties on BXTMika Westerberg2-0/+24
I2C host controller need to be configured properly in order to meet I2C timings specified in the I2C protocol specification. Some Intel Broxton based machines do not have this information in the ACPI namespace (or the boot firmware does not support ACPI at all) so we use build-in device properties instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: ipaq-micro: Use __maybe_unused to hide pm functionsArnd Bergmann1-1/+1
The ipaq-micro driver uses SET_SYSTEM_SLEEP_PM_OPS() to remove the reference to its resume function, but does not use an #ifdef around the definition, so we get a build warning: drivers/mfd/ipaq-micro.c:379:12: error: 'micro_resume' defined but not used [-Werror=unused-function] This adds a __maybe_unused annotation so the compiler knows it can silently drop it instead of warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Add max77802 to I2C device ID tableJavier Martinez Canillas1-0/+1
The max77686 MFD driver supports both the Maxim 77686 and Maxim 77802 PMICs but only the OF device table contains entries for both devices. The max77802 entry is missing in the I2C device ID table which isn't a problem currently since the driver only supports DT but it will be needed if the driver is changed to be built as a module since the I2C core always reports a I2C modalias uevent so auto-load will not work. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Export OF module alias informationJavier Martinez Canillas1-0/+1
When the device is registered via OF, the OF table is used to match the driver instead of the I2C device ID table but the entries in the latter are used as aliasses to load the module if the driver was not built-in. This is because the I2C core always reports an I2C module alias instead of an OF one but that could change so it is better to always export it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: max77686: Allow driver to be built as a moduleJavier Martinez Canillas1-2/+2
The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: stmpe: Add the proper PWM resourcesLinus Walleij1-0/+35
This adds the PWM resources to the STMPE MFD driver, so that it can properly grab and use them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: tps65090: Set regmap config reg counts properlyMaciej S. Szmigiero1-3/+2
Regmap config max_register field should contain number of device last register, however num_reg_defaults_raw field should be set to register count instead (usually one register more than max_register). tps65090 driver had both of these fields set to the same value, fix this by introducing separate defines for max register number and total count of registers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: as3711: Set regmap config reg counts properlyMaciej S. Szmigiero1-2/+2
Regmap config max_register field should contain number of device last register, however num_reg_defaults_raw field should be set to register count instead (usually one register more than max_register). as3711 driver had both of these fields set to the same value, fix this by introducing separate defines for max register number and total count of registers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: rc5t583: Set regmap config reg counts properlyMaciej S. Szmigiero1-2/+2
Regmap config max_register field should contain number of device last register, however num_reg_defaults_raw field should be set to register count instead (usually one register more than max_register). rc5t583 driver had both of these fields set to the same value, fix this by introducing separate defines for max register number and total count of registers. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: mt6397: Add platform device ID tableJavier Martinez Canillas1-1/+7
The platform bus_type .match callback attempts to match the platform device name with an entry on the .id_table if provided and fallbacks to match with the driver's name if a table is not provided. Using a platform device ID to match is more explicit, allows the driver to support more than one device and also the MODULE_DEVICE_TABLE macro can be used to export the module aliases information instead of the MODULE_ALIAS. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: da9063: Fix missing volatile registers in the core regmap_range ↵Steve Twiss1-6/+30
volatile lists Add an updated set of registers listed in the core regmap_range volatile ranges defined for the DA9063. These new registers contain bits that cannot be considered under the full control of software. Under various conditions the hardware will set and/or automatically clear bit(s) contained in these registers. When using a cached version of regmap, the volatility of these registers must be identified otherwise the regmap operations may not ensure the registers are explicitly altered. As well as updating the list of volatile registers, this change will fix a corner case discovered in the DA9063 ONKEY which is used by the DA9063 core. In the ONKEY case, the CONTROL_B register is now listed as volatile in the regmap_range because it contains the bit field NONKEY_LOCK. This bit can be altered by hardware, in which case regmap must be notified of its ability to be manpiulated outside of software control. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: mt6397: Add MT6323 support to MT6397 driverJohn Crispin1-0/+20
Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: mt6397: Add support for different Slave typesJohn Crispin1-17/+41
Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: mt6397: int_con and int_status may vary in locationJohn Crispin1-10/+17
MT6323 has the INT_CON and INT_STATUS located at a different position. Make the registers locations configurable. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: da9062: Fix missing volatile registers in the core regmap_range ↵Steve Twiss1-1/+22
volatile lists Add an updated set of registers listed in the core regmap_range volatile ranges defined for the DA9062. These new registers contain bits that cannot be considered under the full control of software. Under various conditions the hardware will set and/or automatically clear bit(s) contained in these registers. When using a cached version of regmap, the volatility of these registers must be identified otherwise the regmap operations may not ensure the registers are explicitly altered. As well as updating the list of volatile registers, this change will fix a corner case discovered in the DA9063 ONKEY which is used by the DA9062 core. In the ONKEY case, the CONTROL_B register is now listed as volatile in the regmap_range because it contains the bit field NONKEY_LOCK. This bit can be altered by hardware, in which case regmap must be notified of its ability to be manpiulated outside of software control. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: act8945a: Add Active-semi ACT8945A PMIC MFD driverWenyou Yang3-0/+114
This patch adds support for the Active-semi ACT8945A PMIC. It is a Multi Function Device with the following subdevices: - Regulator - Charger It is interfaced to the host controller using I2C interface, ACT8945A is a child device of the I2C. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: arizona: Remove duplicate select of MFD_CORECharles Keepax1-2/+0
MFD_ARIZONA_I2C and MFD_ARIZONA_SPI both select MFD_ARIZONA and all three of those select MFD_CORE, this makes the selects of MFD_CORE in MFD_ARIZONA_I2C and MFD_ARIZONA_SPI redundant, so we remove them. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: cs47l24: Fix defaults array based on testingCharles Keepax1-9/+1
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: wm8998: Fix defaults array based on testingCharles Keepax1-10/+2
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: wm5102: Fix defaults array based on testingCharles Keepax1-12/+4
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: wm5110: Fix defaults array based on testingCharles Keepax1-45/+37
My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: arizona: Update small typo in Arizona SPI KconfigCharles Keepax1-1/+1
The help text had a copy and paste error and refers to I2C in the SPI section. This patch corrects this typo. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: syscon: Make syscon_regmap_config constPhilipp Zabel1-5/+5
syscon_regmap_config can be made const if syscon_probe() creates a local copy on the stack, just like syscon_register() does. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: syscon: Set regmap max_register in of_syscon_registerPhilipp Zabel1-1/+8
Determine the regmap max_register configuration from the io resource size and the reg-io-width device tree property. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: db8500: Avoid uninitialized variable referenceArnd Bergmann1-5/+2
The prcmu_config_clkout() function ensures that the 'clkout' argument can only be '0' or '1' using an appropriate BUG_ON(), so the compiler should know that the div_mask, mask, and bits variables are always initialized later on. However, it doesn't understand this in gcc-5.2 and produces a false positive warning instead: drivers/mfd/db8500-prcmu.c: In function 'prcmu_config_clkout': drivers/mfd/db8500-prcmu.c:762:10: error: 'div_mask' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (val & div_mask) { ^ drivers/mfd/db8500-prcmu.c:769:13: error: 'mask' may be used uninitialized in this function [-Werror=maybe-uninitialized] if ((val & mask & ~div_mask) != bits) { ^ drivers/mfd/db8500-prcmu.c:757:7: error: 'bits' may be used uninitialized in this function [-Werror=maybe-uninitialized] Replacing the switch() statement with an equivalent if() lets gcc figure this out reliably and avoids the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16mfd: tps65086: Add driver for the TPS65086 PMICAndrew F. Davis3-0/+163
Add support for the TPS65912 device. It provides communication through I2C and contains the following components: - Regulators - Load switches - GPO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-15Merge tag 'rtc-4.6' of ↵Linus Torvalds1-83/+3
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Core: - New sysfs interface to set and read clock offset - Drivers can now be both I2C and SPI (see pcf2127 and ds3232) New drivers: - Alphascale ASM9260 - Epson RX6110SA - Maxim max20024 and max77620 (in max77686) - Microchip PIC32 - NXP pcf2129 (in pcf2127) Subsystem wide cleanups: - remove IRQF_EARLY_RESUME when unecessary Drivers: - ds1307: clock output, temperature sensor and wakeup-source support - ds1685: actually spin forever in poweroff error path - ds3232: many cleanups - ds3234: merged in ds3232 - hym8563: fix invalid year calculation - max77686: many cleanups - max77802 merged in max77686 - pcf2123: cleanups and offset support - pcf85063: cleanups - pcf8523: propely handle oscillator stop bit - rv3029: many cleanups, trickle charger and temperature sensor support - rv8803: convert spin_lock to mutex_lock - rx8025: many fixes - vr41xx: restore alarm_irq_enable" * tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits) rtc: pcf2127: add pcf2129 device id rtc: pcf2127: add support for spi interface rtc: pcf2127: convert to use regmap rtc: rv3029: Add thermometer hwmon support rtc: rv3029: Add update_bits helper for eeprom access rtc: ds1685: actually spin forever in poweroff error path rtc: hym8563: fix invalid year calculation rtc: ds3232: use rtc->ops_lock to protect alarm operations rtc: ds3232: fix issue when irq is shared several devices rtc: ds3232: remove unused UIE code rtc: ds3232: add register access error checks rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON rtc: merge ds3232 and ds3234 rtc: ds3232: convert to use regmap rtc: pxa: fix Kconfig indentation rtc: rv3029: Add device tree property for trickle charger rtc: rv3029: Add functions for EEPROM access rtc: rv3029: Add i2c register update-bits helper rtc: rv3029: Add missing register definitions rtc: rv3029: Add "rv3029" I2C device id ...
2016-03-14rtc: max77686: move initialisation of rtc regmap, irq chip locallyLaxman Dewangan1-82/+3
To make RTC block of MAX77686/MAX77802 as independent driver, move the registration of i2c device, regmap for register access and irq_chip for interrupt support inside the RTC driver. Removed the same initialisation from MFD driver. Having this change will allow to reuse this driver for different PMIC/devices from Maxim Semiconductor if they kept same RTC IP on different PMIC. Some of examples as PMIC MAX77620, MAX20024 where same RTC IP used and hence driver for these chips will use this driver only for RTC support. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14mfd: max77686: do not set i2c client data for rtc i2c clientLaxman Dewangan1-1/+0
There is different RTC I2C address for RTC block in MAX77686. Driver is creating dummy i2c client for this address to access the register of this IP block. As there is no call to i2c_get_clientdata() for rtc_i2c client, there is no need to store pointer and hence removing the call to set client data for rtc i2c client. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-09Merge branch 'ib-mfd-regulator-gpio-4.6' of ↵Linus Walleij6-604/+198
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into devel
2016-03-09mfd: lpss: Add PCI IDs for Intel Broxton B-Step platformHuiquan Zhong1-1/+18
Add PCI IDs for Intel Broxton B-Step platform, which have same LPSS devices with A-Step. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> cked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09mfd: Allow i2c modular drivers to build with I2C=mAxel Lin1-7/+7
These drivers can be built as module, so make them depend on I2C rather than I2C=y. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09mfd: intel-lpss: Remove clock tree on error pathAndy Shevchenko1-0/+1
We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09mfd: tps65010: Fix init when the driver is built-inAaro Koskinen1-20/+1
tps65010 driver's initcall cannot succeed when the driver is built-in, because it expects that the I2C probe is completed at initcall time; this cannot happen as MFD is initialized before I2C. Also on systems where the chip is not present there is unnecessary 30 ms delay during the boot. Instead of waiting for probe to finish, just register the I2C device. If some boards need retry mechanism for startup glitches, that should be done in the actual probe function. Also delete the driver banner message. The patch allows to use tps65010 again with OMAP1 (where it's required to be built-in) and enables e.g. USB and LED functionality on OMAP5912 OSK. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-09Merge branches 'ib-mfd-clk-4.6', 'ib-mfd-input-iio-4.6', ↵Lee Jones10-689/+643
'ib-mfd-regulator-4.6' and 'ib-mfd-regulator-gpio-4.6' into ibs-for-mfd-merged
2016-02-16gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas1-1/+1
Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-12mfd: axp20x: Add support for RSB based AXP223 PMICChen-Yu Tsai4-0/+94
The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Whitespace, open parenthesis alignment code style fixesChen-Yu Tsai1-4/+4
This fixes some leftover code style issues in the axp20x core. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Split the driver into core and i2c bitsChen-Yu Tsai4-80/+129
The axp20x driver assumes the device is i2c based. This is not the case with later chips, which use a proprietary 2 wire serial bus by Allwinner called "Reduced Serial Bus". This patch follows the example of mfd/wm831x and splits it into an interface independent core, and an i2c specific glue layer. MFD_AXP20X and the new MFD_AXP20X_I2C are changed to tristate symbols, allowing the driver to be built as modules. Whitespace and other style errors in the moved i2c specific code have been fixed. Included but unused header files are removed as well. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Add missing copyright noticeChen-Yu Tsai1-0/+2
Supply a backdated copyright notice. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Use dev->driver->of_match_table in axp20x_match_device()Chen-Yu Tsai1-1/+1
In axp20x_match_device(), match the of_device_id table bound to the device driver instead of pointing to axp20x_of_match directly. This will allow us to keep axp20x_match_device() unmodified when we expand the axp20x driver into multiple ones covering different interface types. of_device_get_match_data() cannot be used here as we need to know if it failed to get a match, or if the match data value just happened to be 0, as it is for the AXP152. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-12mfd: axp20x: Remove second struct device * parameter for axp20x_match_device()Chen-Yu Tsai1-5/+6
The first argument passed to axp20x_match_device(), struct axp20x_dev *, already contains a pointer to the device. By rearranging some code, moving the assignment of the pointer before axp20x_match_device() is called, we can eliminate the second parameter. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11mfd: tps65912: Add driver for the TPS65912 PMICAndrew F. Davis5-0/+295
This patch adds support for TPS65912 PMIC MFD core. It provides communication through the I2C and SPI interfaces. It contains the following components: - Regulators - GPIO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11mfd: tps65912: Remove old driver in preparation for new driverAndrew F. Davis6-701/+0
The old tps65912 driver is being replaced, delete old driver. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11mfd: fsl-imx25-tsadc: Register touchscreen ADC driverMarkus Pargmann3-0/+214
This is the core driver for imx25 touchscreen/adc driver. The module has one shared ADC and two different conversion queues which use the ADC. The two queues are identical. Both can be used for general purpose ADC but one is meant to be used for touchscreens. This driver is the core which manages the central components and registers of the TSC/ADC unit. It manages the IRQs and forwards them to the correct components. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> [ensure correct ADC clock depending on the IPG clock] Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-11mfd: intel_quark_i2c_gpio: Use clkdev_create()Stephen Boyd1-17/+9
Convert this driver to use clkdev_create() instead of clk_register_clkdevs(). The latter API is only used by this driver, although this driver only allocates one clk to add anyway. Furthermore, this driver allocates the clk_lookup structure with devm, but clkdev_drop() will free that structure when passed, leading to a double free when this driver is removed. Clean it all up and pave the way for the removal of clk_register_clkdevs(). Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-02-09thermal: allow u8500-thermal driver to be a moduleArnd Bergmann1-0/+3
When the thermal subsystem is a loadable module, the u8500 driver fails to build: drivers/thermal/built-in.o: In function `db8500_thermal_probe': db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register' drivers/thermal/built-in.o: In function `db8500_thermal_work': db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds6-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 17:21:15 +0000