diff options
Diffstat (limited to 'drivers')
27 files changed, 1492 insertions, 132 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index f64b662c74db..3227ebeae3f1 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -120,8 +120,6 @@ source "drivers/staging/gdm72xx/Kconfig" source "drivers/staging/csr/Kconfig" -source "drivers/staging/ti-soc-thermal/Kconfig" - source "drivers/staging/silicom/Kconfig" source "drivers/staging/ced1401/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 1fb58a1562cb..4d79ebe2de06 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/ obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/ obj-$(CONFIG_CSR_WIFI) += csr/ -obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/ obj-$(CONFIG_CED1401) += ced1401/ obj-$(CONFIG_DRM_IMX) += imx-drm/ diff --git a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt deleted file mode 100644 index 1629652372b6..000000000000 --- a/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Texas Instrument OMAP SCM bandgap bindings - -In the System Control Module, OMAP supplies a voltage reference -and a temperature sensor feature that are gathered in the band -gap voltage and temperature sensor (VBGAPTS) module. The band -gap provides current and voltage reference for its internal -circuits and other analog IP blocks. The analog-to-digital -converter (ADC) produces an output value that is proportional -to the silicon temperature. - -Required properties: -- compatible : Should be: - - "ti,omap4430-bandgap" : for OMAP4430 bandgap - - "ti,omap4460-bandgap" : for OMAP4460 bandgap - - "ti,omap4470-bandgap" : for OMAP4470 bandgap - - "ti,omap5430-bandgap" : for OMAP5430 bandgap -- interrupts : this entry should indicate which interrupt line -the talert signal is routed to; -Specific: -- ti,tshut-gpio : this entry should be used to inform which GPIO -line the tshut signal is routed to; -- regs : this entry must also be specified and it is specific -to each bandgap version, because the mapping may change from -soc to soc, apart of depending on available features. - -Example: -OMAP4430: -bandgap { - reg = <0x4a002260 0x4 0x4a00232C 0x4>; - compatible = "ti,omap4430-bandgap"; -}; - -OMAP4460: -bandgap { - reg = <0x4a002260 0x4 - 0x4a00232C 0x4 - 0x4a002378 0x18>; - compatible = "ti,omap4460-bandgap"; - interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; -}; - -OMAP4470: -bandgap { - reg = <0x4a002260 0x4 - 0x4a00232C 0x4 - 0x4a002378 0x18>; - compatible = "ti,omap4470-bandgap"; - interrupts = <0 126 4>; /* talert */ - ti,tshut-gpio = <86>; -}; - -OMAP5430: -bandgap { - reg = <0x4a0021e0 0xc - 0x4a00232c 0xc - 0x4a002380 0x2c - 0x4a0023C0 0x3c>; - compatible = "ti,omap5430-bandgap"; - interrupts = <0 126 4>; /* talert */ -}; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 5e3c02554d99..e988c81d763c 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -169,4 +169,19 @@ config INTEL_POWERCLAMP enforce idle time which results in more package C-state residency. The user interface is exposed via generic thermal framework. +config X86_PKG_TEMP_THERMAL + tristate "X86 package temperature thermal driver" + depends on X86_THERMAL_VECTOR + select THERMAL_GOV_USER_SPACE + default m + help + Enable this to register CPU digital sensor for package temperature as + thermal zone. Each package will have its own thermal zone. There are + two trip points which can be set by user to get notifications via thermal + notification methods. + +menu "Texas Instruments thermal drivers" +source "drivers/thermal/ti-soc-thermal/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index c054d410ac3f..67184a293e3f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -23,4 +23,5 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o - +obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o +obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 54ffd64ca3f7..5e53212b984f 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -200,7 +200,6 @@ static int armada_thermal_exit(struct platform_device *pdev) platform_get_drvdata(pdev); thermal_zone_device_unregister(armada_thermal); - platform_set_drvdata(pdev, NULL); return 0; } @@ -211,7 +210,7 @@ static struct platform_driver armada_thermal_driver = { .driver = { .name = "armada_thermal", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(armada_thermal_id_table), + .of_match_table = armada_thermal_id_table, }, }; diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index c94bf2e5de62..82e15dbb3ac7 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -167,7 +167,7 @@ static int get_property(unsigned int cpu, unsigned long input, continue; /* get the frequency order */ - if (freq != CPUFREQ_ENTRY_INVALID && descend != -1) + if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) descend = !!(freq > table[i].frequency); freq = table[i].frequency; diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c index a088d1365ca5..828f5e345c30 100644 --- a/drivers/thermal/dove_thermal.c +++ b/drivers/thermal/dove_thermal.c @@ -134,16 +134,11 @@ static int dove_thermal_probe(struct platform_device *pdev) struct resource *res; int ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->sensor = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->sensor)) return PTR_ERR(priv->sensor); @@ -178,7 +173,6 @@ static int dove_thermal_exit(struct platform_device *pdev) platform_get_drvdata(pdev); thermal_zone_device_unregister(dove_thermal); - platform_set_drvdata(pdev, NULL); return 0; } @@ -191,7 +185,7 @@ static struct platform_driver dove_thermal_driver = { .driver = { .name = "dove_thermal", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(dove_thermal_id_table), + .of_match_table = dove_thermal_id_table, }, }; diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index 4cbe3eea6deb..9af4b93c9f86 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -997,7 +997,6 @@ static int exynos_tmu_probe(struct platform_device *pdev) return 0; err_clk: - platform_set_drvdata(pdev, NULL); clk_unprepare(data->clk); return ret; } @@ -1012,8 +1011,6 @@ static int exynos_tmu_remove(struct platform_device *pdev) clk_unprepare(data->clk); - platform_set_drvdata(pdev, NULL); - return 0; } diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c index dfeceaffbc03..3b034a0dfc94 100644 --- a/drivers/thermal/kirkwood_thermal.c +++ b/drivers/thermal/kirkwood_thermal.c @@ -75,16 +75,11 @@ static int kirkwood_thermal_probe(struct platform_device *pdev) struct kirkwood_thermal_priv *priv; struct resource *res; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENODEV; - } - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->sensor = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->sensor)) return PTR_ERR(priv->sensor); @@ -108,7 +103,6 @@ static int kirkwood_thermal_exit(struct platform_device *pdev) platform_get_drvdata(pdev); thermal_zone_device_unregister(kirkwood_thermal); - platform_set_drvdata(pdev, NULL); return 0; } @@ -121,7 +115,7 @@ static struct platform_driver kirkwood_thermal_driver = { .driver = { .name = "kirkwood_thermal", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(kirkwood_thermal_id_table), + .of_match_table = kirkwood_thermal_id_table, }, }; diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 8d7edd4c8228..88f92e1a9944 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -389,11 +389,6 @@ static int rcar_thermal_probe(struct platform_device *pdev) * platform has IRQ support. * Then, drier use common register */ - res = platform_get_resource(pdev, IORESOURCE_MEM, mres++); - if (!res) { - dev_err(dev, "Could not get platform resource\n"); - return -ENODEV; - } ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0, dev_name(dev), common); @@ -405,6 +400,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) /* * rcar_has_irq_support() will be enabled */ + res = platform_get_resource(pdev, IORESOURCE_MEM, mres++); common->base = devm_ioremap_resource(dev, res); if (IS_ERR(common->base)) return PTR_ERR(common->base); @@ -458,7 +454,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) platform_set_drvdata(pdev, common); - dev_info(dev, "%d sensor proved\n", i); + dev_info(dev, "%d sensor probed\n", i); return 0; @@ -487,8 +483,6 @@ static int rcar_thermal_remove(struct platform_device *pdev) rcar_thermal_irq_disable(priv); } - platform_set_drvdata(pdev, NULL); - pm_runtime_put_sync(dev); pm_runtime_disable(dev); diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c index 3c5ee5607977..ab79ea4701d9 100644 --- a/drivers/thermal/spear_thermal.c +++ b/drivers/thermal/spear_thermal.c @@ -104,7 +104,7 @@ static int spear_thermal_probe(struct platform_device *pdev) struct thermal_zone_device *spear_thermal = NULL; struct spear_thermal_dev *stdev; struct device_node *np = pdev->dev.of_node; - struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *res; int ret = 0, val; if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) { @@ -112,11 +112,6 @@ static int spear_thermal_probe(struct platform_device *pdev) return -EINVAL; } - if (!stres) { - dev_err(&pdev->dev, "memory resource missing\n"); - return -ENODEV; - } - stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL); if (!stdev) { dev_err(&pdev->dev, "kzalloc fail\n"); @@ -124,12 +119,10 @@ static int spear_thermal_probe(struct platform_device *pdev) } /* Enable thermal sensor */ - stdev->thermal_base = devm_ioremap(&pdev->dev, stres->start, - resource_size(stres)); - if (!stdev->thermal_base) { - dev_err(&pdev->dev, "ioremap failed\n"); - return -ENOMEM; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + stdev->thermal_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(stdev->thermal_base)) + return PTR_ERR(stdev->thermal_base); stdev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(stdev->clk)) { @@ -174,7 +167,6 @@ static int spear_thermal_exit(struct platform_device *pdev) struct spear_thermal_dev *stdev = spear_thermal->devdata; thermal_zone_device_unregister(spear_thermal); - platform_set_drvdata(pdev, NULL); /* Disable SPEAr Thermal Sensor */ actual_mask = readl_relaxed(stdev->thermal_base); @@ -198,7 +190,7 @@ static struct platform_driver spear_thermal_driver = { .name = "spear_thermal", .owner = THIS_MODULE, .pm = &spear_thermal_pm_ops, - .of_match_table = of_match_ptr(spear_thermal_id_table), + .of_match_table = spear_thermal_id_table, }, }; diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index d755440791b7..1f02e8edb45c 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -33,6 +33,7 @@ #include <linux/idr.h> #include <linux/thermal.h> #include <linux/reboot.h> +#include <linux/string.h> #include <net/netlink.h> #include <net/genetlink.h> @@ -155,7 +156,8 @@ int get_tz_trend(struct thermal_zone_device *tz, int trip) { enum thermal_trend trend; - if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) { + if (tz->emul_temperature || !tz->ops->get_trend || + tz->ops->get_trend(tz, trip, &trend)) { if (tz->temperature > tz->last_temperature) trend = THERMAL_TREND_RAISING; else if (tz->temperature < tz->last_temperature) @@ -713,10 +715,13 @@ policy_store(struct device *dev, struct device_attribute *attr, int ret = -EINVAL; struct thermal_zone_device *tz = to_thermal_zone(dev); struct thermal_governor *gov; + char name[THERMAL_NAME_LENGTH]; + + snprintf(name, sizeof(name), "%s", buf); mutex_lock(&thermal_governor_lock); - gov = __find_governor(buf); + gov = __find_governor(strim(name)); if (!gov) goto exit; @@ -1624,7 +1629,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, if (!ops || !ops->get_temp) return ERR_PTR(-EINVAL); - if (trips > 0 && !ops->get_trip_type) + if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp)) return ERR_PTR(-EINVAL); tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL); diff --git a/drivers/staging/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig index e81375fb2155..bd4c7beba679 100644 --- a/drivers/staging/ti-soc-thermal/Kconfig +++ b/drivers/thermal/ti-soc-thermal/Kconfig @@ -46,3 +46,15 @@ config OMAP5_THERMAL This includes alert interrupts generation and also the TSHUT support. + +config DRA752_THERMAL + bool "Texas Instruments DRA752 thermal support" + depends on TI_SOC_THERMAL + depends on SOC_DRA7XX + help + If you say yes here you get thermal support for the Texas Instruments + DRA752 SoC family. The current chip supported are: + - DRA752 + + This includes alert interrupts generation and also the TSHUT + support. diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/thermal/ti-soc-thermal/Makefile index 0ca034fb419d..1226b2484e55 100644 --- a/drivers/staging/ti-soc-thermal/Makefile +++ b/drivers/thermal/ti-soc-thermal/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o ti-soc-thermal-y := ti-bandgap.o ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o +ti-soc-thermal-$(CONFIG_DRA752_THERMAL) += dra752-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o diff --git a/drivers/staging/ti-soc-thermal/TODO b/drivers/thermal/ti-soc-thermal/TODO index 7da787d19241..7da787d19241 100644 --- a/drivers/staging/ti-soc-thermal/TODO +++ b/drivers/thermal/ti-soc-thermal/TODO diff --git a/drivers/thermal/ti-soc-thermal/dra752-bandgap.h b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h new file mode 100644 index 000000000000..6b0f2b1160f7 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/dra752-bandgap.h @@ -0,0 +1,280 @@ +/* + * DRA752 bandgap registers, bitfields and temperature definitions + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Contact: + * Eduardo Valentin <eduardo.valentin@ti.com> + * Tero Kristo <t-kristo@ti.com> + * + * This is an auto generated file. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#ifndef __DRA752_BANDGAP_H +#define __DRA752_BANDGAP_H + +/** + * *** DRA752 *** + * + * Below, in sequence, are the Register definitions, + * the bitfields and the temperature definitions for DRA752. + */ + +/** + * DRA752 register definitions + * + * Registers are defined as offsets. The offsets are + * relative to FUSE_OPP_BGAP_GPU on DRA752. + * DRA752_BANDGAP_BASE 0x4a0021e0 + * + * Register below are grouped by domain (not necessarily in offset order) + */ + + +/* DRA752.common register offsets */ +#define DRA752_BANDGAP_CTRL_1_OFFSET 0x1a0 +#define DRA752_BANDGAP_STATUS_1_OFFSET 0x1c8 +#define DRA752_BANDGAP_CTRL_2_OFFSET 0x39c +#define DRA752_BANDGAP_STATUS_2_OFFSET 0x3b8 + +/* DRA752.core register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET 0x8 +#define DRA752_TEMP_SENSOR_CORE_OFFSET 0x154 +#define DRA752_BANDGAP_THRESHOLD_CORE_OFFSET 0x1ac +#define DRA752_BANDGAP_TSHUT_CORE_OFFSET 0x1b8 +#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET 0x1c4 +#define DRA752_DTEMP_CORE_0_OFFSET 0x208 +#define DRA752_DTEMP_CORE_1_OFFSET 0x20c +#define DRA752_DTEMP_CORE_2_OFFSET 0x210 +#define DRA752_DTEMP_CORE_3_OFFSET 0x214 +#define DRA752_DTEMP_CORE_4_OFFSET 0x218 + +/* DRA752.iva register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET 0x388 +#define DRA752_TEMP_SENSOR_IVA_OFFSET 0x398 +#define DRA752_BANDGAP_THRESHOLD_IVA_OFFSET 0x3a4 +#define DRA752_BANDGAP_TSHUT_IVA_OFFSET 0x3ac +#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET 0x3b4 +#define DRA752_DTEMP_IVA_0_OFFSET 0x3d0 +#define DRA752_DTEMP_IVA_1_OFFSET 0x3d4 +#define DRA752_DTEMP_IVA_2_OFFSET 0x3d8 +#define DRA752_DTEMP_IVA_3_OFFSET 0x3dc +#define DRA752_DTEMP_IVA_4_OFFSET 0x3e0 + +/* DRA752.mpu register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET 0x4 +#define DRA752_TEMP_SENSOR_MPU_OFFSET 0x14c +#define DRA752_BANDGAP_THRESHOLD_MPU_OFFSET 0x1a4 +#define DRA752_BANDGAP_TSHUT_MPU_OFFSET 0x1b0 +#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET 0x1bc +#define DRA752_DTEMP_MPU_0_OFFSET 0x1e0 +#define DRA752_DTEMP_MPU_1_OFFSET 0x1e4 +#define DRA752_DTEMP_MPU_2_OFFSET 0x1e8 +#define DRA752_DTEMP_MPU_3_OFFSET 0x1ec +#define DRA752_DTEMP_MPU_4_OFFSET 0x1f0 + +/* DRA752.dspeve register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET 0x384 +#define DRA752_TEMP_SENSOR_DSPEVE_OFFSET 0x394 +#define DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET 0x3a0 +#define DRA752_BANDGAP_TSHUT_DSPEVE_OFFSET 0x3a8 +#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET 0x3b0 +#define DRA752_DTEMP_DSPEVE_0_OFFSET 0x3bc +#define DRA752_DTEMP_DSPEVE_1_OFFSET 0x3c0 +#define DRA752_DTEMP_DSPEVE_2_OFFSET 0x3c4 +#define DRA752_DTEMP_DSPEVE_3_OFFSET 0x3c8 +#define DRA752_DTEMP_DSPEVE_4_OFFSET 0x3cc + +/* DRA752.gpu register offsets */ +#define DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET 0x0 +#define DRA752_TEMP_SENSOR_GPU_OFFSET 0x150 +#define DRA752_BANDGAP_THRESHOLD_GPU_OFFSET 0x1a8 +#define DRA752_BANDGAP_TSHUT_GPU_OFFSET 0x1b4 +#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET 0x1c0 +#define DRA752_DTEMP_GPU_0_OFFSET 0x1f4 +#define DRA752_DTEMP_GPU_1_OFFSET 0x1f8 +#define DRA752_DTEMP_GPU_2_OFFSET 0x1fc +#define DRA752_DTEMP_GPU_3_OFFSET 0x200 +#define DRA752_DTEMP_GPU_4_OFFSET 0x204 + +/** + * Register bitfields for DRA752 + * + * All the macros bellow define the required bits for + * controlling temperature on DRA752. Bit defines are + * grouped by register. + */ + +/* DRA752.BANDGAP_STATUS_1 */ +#define DRA752_BANDGAP_STATUS_1_ALERT_MASK BIT(31) +#define DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK BIT(5) +#define DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK BIT(4) +#define DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK BIT(3) +#define DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK BIT(2) +#define DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK BIT(1) +#define DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK BIT(0) + +/* DRA752.BANDGAP_CTRL_2 */ +#define DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK BIT(22) +#define DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK BIT(21) +#define DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK BIT(19) +#define DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK BIT(18) +#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK BIT(16) +#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK BIT(15) +#define DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK BIT(3) +#define DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK BIT(2) +#define DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK BIT(1) +#define DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK BIT(0) + +/* DRA752.BANDGAP_STATUS_2 */ +#define DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK BIT(3) +#define DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK BIT(2) +#define DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK BIT(1) +#define DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK BIT(0) + +/* DRA752.BANDGAP_CTRL_1 */ +#define DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK (0x3 << 30) +#define DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK (0x7 << 27) +#define DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK BIT(23) +#define DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK BIT(22) +#define DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK BIT(21) +#define DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK BIT(20) +#define DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK BIT(19) +#define DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK BIT(18) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK BIT(17) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK BIT(16) +#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK BIT(15) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK BIT(5) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK BIT(4) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK BIT(3) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK BIT(2) +#define DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK BIT(1) +#define DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK BIT(0) + +/* DRA752.TEMP_SENSOR */ +#define DRA752_TEMP_SENSOR_TMPSOFF_MASK BIT(11) +#define DRA752_TEMP_SENSOR_EOCZ_MASK BIT(10) +#define DRA752_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) + +/* DRA752.BANDGAP_THRESHOLD */ +#define DRA752_BANDGAP_THRESHOLD_HOT_MASK (0x3ff << 16) +#define DRA752_BANDGAP_THRESHOLD_COLD_MASK (0x3ff << 0) + +/* DRA752.TSHUT_THRESHOLD */ +#define DRA752_TSHUT_THRESHOLD_MUXCTRL_MASK BIT(31) +#define DRA752_TSHUT_THRESHOLD_HOT_MASK (0x3ff << 16) +#define DRA752_TSHUT_THRESHOLD_COLD_MASK (0x3ff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_CORE */ +#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_IVA */ +#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_MPU */ +#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_DSPEVE */ +#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_MASK (0xffffffff << 0) + +/* DRA752.BANDGAP_CUMUL_DTEMP_GPU */ +#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_MASK (0xffffffff << 0) + +/** + * Temperature limits and thresholds for DRA752 + * + * All the macros bellow are definitions for handling the + * ADC conversions and representation of temperature limits + * and thresholds for DRA752. Definitions are grouped + * by temperature domain. + */ + +/* DRA752.common temperature definitions */ +/* ADC conversion table limits */ +#define DRA752_ADC_START_VALUE 540 +#define DRA752_ADC_END_VALUE 945 + +/* DRA752.GPU temperature definitions */ +/* bandgap clock limits */ +#define DRA752_GPU_MAX_FREQ 1500000 +#define DRA752_GPU_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_GPU_MIN_TEMP -40000 +#define DRA752_GPU_MAX_TEMP 125000 +#define DRA752_GPU_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_GPU_TSHUT_HOT 915 +#define DRA752_GPU_TSHUT_COLD 900 +#define DRA752_GPU_T_HOT 800 +#define DRA752_GPU_T_COLD 795 + +/* DRA752.MPU temperature definitions */ +/* bandgap clock limits */ +#define DRA752_MPU_MAX_FREQ 1500000 +#define DRA752_MPU_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_MPU_MIN_TEMP -40000 +#define DRA752_MPU_MAX_TEMP 125000 +#define DRA752_MPU_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_MPU_TSHUT_HOT 915 +#define DRA752_MPU_TSHUT_COLD 900 +#define DRA752_MPU_T_HOT 800 +#define DRA752_MPU_T_COLD 795 + +/* DRA752.CORE temperature definitions */ +/* bandgap clock limits */ +#define DRA752_CORE_MAX_FREQ 1500000 +#define DRA752_CORE_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_CORE_MIN_TEMP -40000 +#define DRA752_CORE_MAX_TEMP 125000 +#define DRA752_CORE_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_CORE_TSHUT_HOT 915 +#define DRA752_CORE_TSHUT_COLD 900 +#define DRA752_CORE_T_HOT 800 +#define DRA752_CORE_T_COLD 795 + +/* DRA752.DSPEVE temperature definitions */ +/* bandgap clock limits */ +#define DRA752_DSPEVE_MAX_FREQ 1500000 +#define DRA752_DSPEVE_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_DSPEVE_MIN_TEMP -40000 +#define DRA752_DSPEVE_MAX_TEMP 125000 +#define DRA752_DSPEVE_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_DSPEVE_TSHUT_HOT 915 +#define DRA752_DSPEVE_TSHUT_COLD 900 +#define DRA752_DSPEVE_T_HOT 800 +#define DRA752_DSPEVE_T_COLD 795 + +/* DRA752.IVA temperature definitions */ +/* bandgap clock limits */ +#define DRA752_IVA_MAX_FREQ 1500000 +#define DRA752_IVA_MIN_FREQ 1000000 +/* sensor limits */ +#define DRA752_IVA_MIN_TEMP -40000 +#define DRA752_IVA_MAX_TEMP 125000 +#define DRA752_IVA_HYST_VAL 5000 +/* interrupts thresholds */ +#define DRA752_IVA_TSHUT_HOT 915 +#define DRA752_IVA_TSHUT_COLD 900 +#define DRA752_IVA_T_HOT 800 +#define DRA752_IVA_T_COLD 795 + +#endif /* __DRA752_BANDGAP_H */ diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c new file mode 100644 index 000000000000..e5d8326a54d6 --- /dev/null +++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c @@ -0,0 +1,476 @@ +/* + * DRA752 thermal data. + * + * Copyright (C) 2013 Texas Instruments Inc. + * Contact: + * Eduardo Valentin <eduardo.valentin@ti.com> + * Tero Kristo <t-kristo@ti.com> + * + * This file is partially autogenerated. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "ti-thermal.h" +#include "ti-bandgap.h" +#include "dra752-bandgap.h" + +/* + * DRA752 has five instances of thermal sensor: MPU, GPU, CORE, + * IVA and DSPEVE need to describe the individual registers and + * bit fields. + */ + +/* + * DRA752 CORE thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_core_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_CORE_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_CORE_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_CORE_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_CORE_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_CORE_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_CORE_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_CORE_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_CORE_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET, +}; + +/* + * DRA752 IVA thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_iva_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_IVA_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_IVA_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_IVA_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_IVA_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_IVA_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_IVA_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_IVA_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_IVA_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET, +}; + +/* + * DRA752 MPU thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_mpu_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_MPU_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_MPU_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_MPU_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_MPU_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_MPU_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_MPU_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_MPU_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_MPU_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET, +}; + +/* + * DRA752 DSPEVE thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_dspeve_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_DSPEVE_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_DSPEVE_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_DSPEVE_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_DSPEVE_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_DSPEVE_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_DSPEVE_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_DSPEVE_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET, +}; + +/* + * DRA752 GPU thermal sensor register offsets and bit-fields + */ +static struct temp_sensor_registers +dra752_gpu_temp_sensor_registers = { + .temp_sensor_ctrl = DRA752_TEMP_SENSOR_GPU_OFFSET, + .bgap_tempsoff_mask = DRA752_TEMP_SENSOR_TMPSOFF_MASK, + .bgap_eocz_mask = DRA752_TEMP_SENSOR_EOCZ_MASK, + .bgap_dtemp_mask = DRA752_TEMP_SENSOR_DTEMP_MASK, + .bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET, + .mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK, + .mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK, + .mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK, + .mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK, + .mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK, + .mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK, + .bgap_threshold = DRA752_BANDGAP_THRESHOLD_GPU_OFFSET, + .threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK, + .threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK, + .tshut_threshold = DRA752_BANDGAP_TSHUT_GPU_OFFSET, + .tshut_hot_mask = DRA752_TSHUT_THRESHOLD_HOT_MASK, + .tshut_cold_mask = DRA752_TSHUT_THRESHOLD_COLD_MASK, + .bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET, + .status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK, + .status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK, + .status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK, + .bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET, + .ctrl_dtemp_0 = DRA752_DTEMP_GPU_0_OFFSET, + .ctrl_dtemp_1 = DRA752_DTEMP_GPU_1_OFFSET, + .ctrl_dtemp_2 = DRA752_DTEMP_GPU_2_OFFSET, + .ctrl_dtemp_3 = DRA752_DTEMP_GPU_3_OFFSET, + .ctrl_dtemp_4 = DRA752_DTEMP_GPU_4_OFFSET, + .bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET, +}; + +/* Thresholds and limits for DRA752 MPU temperature sensor */ +static struct temp_sensor_data dra752_mpu_temp_sensor_data = { + .tshut_hot = DRA752_MPU_TSHUT_HOT, + .tshut_cold = DRA752_MPU_TSHUT_COLD, + .t_hot = DRA752_MPU_T_HOT, + .t_cold = DRA752_MPU_T_COLD, + .min_freq = DRA752_MPU_MIN_FREQ, + .max_freq = DRA752_MPU_MAX_FREQ, + .max_temp = DRA752_MPU_MAX_TEMP, + .min_temp = DRA752_MPU_MIN_TEMP, + .hyst_val = DRA752_MPU_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 GPU temperature sensor */ +static struct temp_sensor_data dra752_gpu_temp_sensor_data = { + .tshut_hot = DRA752_GPU_TSHUT_HOT, + .tshut_cold = DRA752_GPU_TSHUT_COLD, + .t_hot = DRA752_GPU_T_HOT, + .t_cold = DRA752_GPU_T_COLD, + .min_freq = DRA752_GPU_MIN_FREQ, + .max_freq = DRA752_GPU_MAX_FREQ, + .max_temp = DRA752_GPU_MAX_TEMP, + .min_temp = DRA752_GPU_MIN_TEMP, + .hyst_val = DRA752_GPU_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 CORE temperature sensor */ +static struct temp_sensor_data dra752_core_temp_sensor_data = { + .tshut_hot = DRA752_CORE_TSHUT_HOT, + .tshut_cold = DRA752_CORE_TSHUT_COLD, + .t_hot = DRA752_CORE_T_HOT, + .t_cold = DRA752_CORE_T_COLD, + .min_freq = DRA752_CORE_MIN_FREQ, + .max_freq = DRA752_CORE_MAX_FREQ, + .max_temp = DRA752_CORE_MAX_TEMP, + .min_temp = DRA752_CORE_MIN_TEMP, + .hyst_val = DRA752_CORE_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 DSPEVE temperature sensor */ +static struct temp_sensor_data dra752_dspeve_temp_sensor_data = { + .tshut_hot = DRA752_DSPEVE_TSHUT_HOT, + .tshut_cold = DRA752_DSPEVE_TSHUT_COLD, + .t_hot = DRA752_DSPEVE_T_HOT, + .t_cold = DRA752_DSPEVE_T_COLD, + .min_freq = DRA752_DSPEVE_MIN_FREQ, + .max_freq = DRA752_DSPEVE_MAX_FREQ, + .max_temp = DRA752_DSPEVE_MAX_TEMP, + .min_temp = DRA752_DSPEVE_MIN_TEMP, + .hyst_val = DRA752_DSPEVE_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* Thresholds and limits for DRA752 IVA temperature sensor */ +static struct temp_sensor_data dra752_iva_temp_sensor_data = { + .tshut_hot = DRA752_IVA_TSHUT_HOT, + .tshut_cold = DRA752_IVA_TSHUT_COLD, + .t_hot = DRA752_IVA_T_HOT, + .t_cold = DRA752_IVA_T_COLD, + .min_freq = DRA752_IVA_MIN_FREQ, + .max_freq = DRA752_IVA_MAX_FREQ, + .max_temp = DRA752_IVA_MAX_TEMP, + .min_temp = DRA752_IVA_MIN_TEMP, + .hyst_val = DRA752_IVA_HYST_VAL, + .update_int1 = 1000, + .update_int2 = 2000, +}; + +/* + * DRA752 : Temperature values in milli degree celsius + * ADC code values from 540 to 945 + */ +static +int dra752_adc_to_temp[DRA752_ADC_END_VALUE - DRA752_ADC_START_VALUE + 1] = { + /* Index 540 - 549 */ + -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, + -37800, + /* Index 550 - 559 */ + -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, -33800, + -33400, + /* Index 560 - 569 */ + -33000, -32600, -32200, -31800, -31400, -31000, -30600, -30200, -29800, + -29400, + /* Index 570 - 579 */ + -29000, -28600, -28200, -27700, -27100, -26600, -26200, -25800, -25400, + -25000, + /* Index 580 - 589 */ + -24600, -24200, -23800, -23400, -23000, -22600, -22200, -21800, -21400, + -21000, + /* Index 590 - 599 */ + -20500, -19900, -19400, -19000, -18600, -18200, -17800, -17400, -17000, + -16600, + /* Index 600 - 609 */ + -16200, -15800, -15400, -15000, -14600, -14200, -13800, -13400, -13000, + -12500, + /* Index 610 - 619 */ + -11900, -11400, -11000, -10600, -10200, -9800, -9400, -9000, -8600, + -8200, + /* Index 620 - 629 */ + -7800, -7400, -7000, -6600, -6200, -5800, -5400, -5000, -4500, + -3900, + /* Index 630 - 639 */ + -3400, -3000, -2600, -2200, -1800, -1400, -1000, -600, -200, + 200, + /* Index 640 - 649 */ + 600, 1000, 1400, 1800, 2200, 2600, 3000, 3400, 3900, + 4500, + /* Index 650 - 659 */ + 5000, 5400, 5800, 6200, 6600, 7000, 7400, 7800, 8200, + 8600, + /* Index 660 - 669 */ + 9000, 9400, 9800, 10200, 10600, 11000, 11400, 11800, 12200, + 12700, + /* Index 670 - 679 */ + 13300, 13800, 14200, 14600, 15000, 15400, 15800, 16200, 16600, + 17000, + /* Index 680 - 689 */ + 17400, 17800, 18200, 18600, 19000, 19400, 19800, 20200, 20600, + 21000, + /* Index 690 - 699 */ + 21400, 21900, 22500, 23000, 23400, 23800, 24200, 24600, 25000, + 25400, + /* Index 700 - 709 */ + 25800, 26200, 26600, 27000, 27400, 27800, 28200, 28600, 29000, + 29400, + /* Index 710 - 719 */ + 29800, 30200, 30600, 31000, 31400, 31900, 32500, 33000, 33400, + 33800, + /* Index 720 - 729 */ + 34200, 34600, 35000, 35400, 35800, 36200, 36600, 37000, 37400, + 37800, + /* Index 730 - 739 */ + 38200, 38600, 39000, 39400, 39800, 40200, 40600, 41000, 41400, + 41800, + /* Index 740 - 749 */ + 42200, 42600, 43100, 43700, 44200, 44600, 45000, 45400, 45800, + 46200, + /* Index 750 - 759 */ + 46600, 47000, 47400, 47800, 48200, 48600, 49000, 49400, 49800, + 50200, + /* Index 760 - 769 */ + 50600, 51000, 51400, 51800, 52200, 52600, 53000, 53400, 53800, + 54200, + /* Index 770 - 779 */ + 54600, 55000, 55400, 55900, 56500, 57000, 57400, 57800, 58200, + 58600, + /* Index 780 - 789 */ + 59000, 59400, 59800, 60200, 60600, 61000, 61400, 61800, 62200, + 62600, + /* Index 790 - 799 */ + 63000, 63400, 63800, 64200, 64600, 65000, 65400, 65800, 66200, + 66600, + /* Index 800 - 809 */ + 67000, 67400, 67800, 68200, 68600, 69000, 69400, 69800, 70200, + 70600, + /* Index 810 - 819 */ + 71000, 71500, 72100, 72600, 73000, 73400, 73800, 74200, 74600, + 75000, + /* Index 820 - 829 */ + 75400, 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, + 79000, + /* Index 830 - 839 */ + 79400, 79800, 80200, 80600, 81000, 81400, 81800, 82200, 82600, + 83000, + /* Index 840 - 849 */ + 83400, 83800, 84200, 84600, 85000, 85400, 85800, 86200, 86600, + 87000, + /* Index 850 - 859 */ + 87400, 87800, 88200, 88600, 89000, 89400, 89800, 90200, 90600, + 91000, + /* Index 860 - 869 */ + 91400, 91800, 92200, 92600, 93000, 93400, 93800, 94200, 94600, + 95000, + /* Index 870 - 879 */ + 95400, 95800, 96200, 96600, 97000, 97500, 98100, 98600, 99000, + 99400, + /* Index 880 - 889 */ + 99800, 100200, 100600, 101000, 101400, 101800, 102200, 102600, 103000, + 103400, + /* Index 890 - 899 */ + 103800, 104200, 104600, 105000, 105400, 105800, 106200, 106600, 107000, + 107400, + /* Index 900 - 909 */ + 107800, 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000, + 111400, + /* Index 910 - 919 */ + 111800, 112200, 112600, 113000, 113400, 113800, 114200, 114600, 115000, + 115400, + /* Index 920 - 929 */ + 115800, 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, + 119400, + /* Index 930 - 939 */ + 119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000, + 123400, + /* Index 940 - 945 */ + 123800, 124200, 124600, 124900, 125000, 125000, +}; + +/* DRA752 data */ +const struct ti_bandgap_data dra752_data = { + .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG | + TI_BANDGAP_FEATURE_FREEZE_BIT | + TI_BANDGAP_FEATURE_TALERT | + TI_BANDGAP_FEATURE_COUNTER_DELAY | + TI_BANDGAP_FEATURE_HISTORY_BUFFER, + .fclock_name = "l3instr_ts_gclk_div", + .div_ck_name = "l3instr_ts_gclk_div", + .conv_table = dra752_adc_to_temp, + .adc_start_val = DRA752_ADC_START_VALUE, + .adc_end_val = DRA752_ADC_END_VALUE, + .expose_sensor = ti_thermal_expose_sensor, + .remove_sensor = ti_thermal_remove_sensor, + .sensors = { + { + .registers = &dra752_mpu_temp_sensor_registers, + .ts_data = &dra752_mpu_temp_sensor_data, + .domain = "cpu", + .register_cooling = ti_thermal_register_cpu_cooling, + .unregister_cooling = ti_thermal_unregister_cpu_cooling, + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_gpu_temp_sensor_registers, + .ts_data = &dra752_gpu_temp_sensor_data, + .domain = "gpu", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_core_temp_sensor_registers, + .ts_data = &dra752_core_temp_sensor_data, + .domain = "core", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_dspeve_temp_sensor_registers, + .ts_data = &dra752_dspeve_temp_sensor_data, + .domain = "dspeve", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + { + .registers = &dra752_iva_temp_sensor_registers, + .ts_data = &dra752_iva_temp_sensor_data, + .domain = "iva", + .slope = DRA752_GRADIENT_SLOPE, + .constant = DRA752_GRADIENT_CONST, + .slope_pcb = DRA752_GRADIENT_SLOPE_W_PCB, + .constant_pcb = DRA752_GRADIENT_CONST_W_PCB, + }, + }, + .sensor_count = 5, +}; diff --git a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c index d255d33da9eb..d255d33da9eb 100644 --- a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c diff --git a/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h index 6f2de3a3356d..6f2de3a3356d 100644 --- a/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h diff --git a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c index eff0c80fd4af..eff0c80fd4af 100644 --- a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c diff --git a/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h index 400b55dffadd..400b55dffadd 100644 --- a/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index f20c1cfe9800..9dfd47196e63 100644 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -38,6 +38,7 @@ #include <linux/of_device.h> #include <linux/of_platform.h> #include <linux/of_irq.h> +#include <linux/of_gpio.h> #include <linux/io.h> #include "ti-bandgap.h" @@ -469,7 +470,7 @@ static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id) { int ret = 0; - if (IS_ERR_OR_NULL(bgp)) { + if (!bgp || IS_ERR(bgp)) { pr_err("%s: invalid bandgap pointer\n", __func__); ret = -EINVAL; goto exit; @@ -992,9 +993,12 @@ int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend) goto exit; } + spin_lock(&bgp->lock); + tsr = bgp->conf->sensors[id].registers; /* Freeze and read the last 2 valid readings */ + RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1); reg1 = tsr->ctrl_dtemp_1; reg2 = tsr->ctrl_dtemp_2; @@ -1008,22 +1012,25 @@ int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend) /* Convert from adc values to mCelsius temperature */ ret = ti_bandgap_adc_to_mcelsius(bgp, temp1, &t1); if (ret) - goto exit; + goto unfreeze; ret = ti_bandgap_adc_to_mcelsius(bgp, temp2, &t2); if (ret) - goto exit; + goto unfreeze; /* Fetch the update interval */ ret = ti_bandgap_read_update_interval(bgp, id, &interval); if (ret || !interval) - goto exit; + goto unfreeze; *trend = (t1 - t2) / interval; dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n", t1, t2, *trend); +unfreeze: + RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0); + spin_unlock(&bgp->lock); exit: return ret; } @@ -1123,7 +1130,6 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) const struct of_device_id *of_id; struct ti_bandgap *bgp; struct resource *res; - u32 prop; int i; /* just for the sake */ @@ -1167,11 +1173,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) } while (res); if (TI_BANDGAP_HAS(bgp, TSHUT)) { - if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) { - dev_err(&pdev->dev, "missing tshut gpio in device tree\n"); - return ERR_PTR(-EINVAL); - } - bgp->tshut_gpio = prop; + bgp->tshut_gpio = of_get_gpio(node, 0); if (!gpio_is_valid(bgp->tshut_gpio)) { dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n", bgp->tshut_gpio); @@ -1191,7 +1193,7 @@ int ti_bandgap_probe(struct platform_device *pdev) int clk_rate, ret = 0, i; bgp = ti_bandgap_build(pdev); - if (IS_ERR_OR_NULL(bgp)) { + if (IS_ERR(bgp)) { dev_err(&pdev->dev, "failed to fetch platform data\n"); return PTR_ERR(bgp); } @@ -1207,17 +1209,19 @@ int ti_bandgap_probe(struct platform_device *pdev) } bgp->fclock = clk_get(NULL, bgp->conf->fclock_name); - ret = IS_ERR_OR_NULL(bgp->fclock); + ret = IS_ERR(bgp->fclock); if (ret) { dev_err(&pdev->dev, "failed to request fclock reference\n"); + ret = PTR_ERR(bgp->fclock); goto free_irqs; } bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name); - ret = IS_ERR_OR_NULL(bgp->div_clk); + ret = IS_ERR(bgp->div_clk); if (ret) { dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n"); + ret = PTR_ERR(bgp->div_clk); goto free_irqs; } @@ -1523,6 +1527,12 @@ static const struct of_device_id of_ti_bandgap_match[] = { .data = (void *)&omap5430_data, }, #endif +#ifdef CONFIG_DRA752_THERMAL + { + .compatible = "ti,dra752-bandgap", + .data = (void *)&dra752_data, + }, +#endif /* Sentinel */ { }, }; diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h index 5f4794abf583..b3adf72f252d 100644 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h @@ -400,4 +400,9 @@ extern const struct ti_bandgap_data omap5430_data; #define omap5430_data NULL #endif +#ifdef CONFIG_DRA752_THERMAL +extern const struct ti_bandgap_data dra752_data; +#else +#define dra752_data NULL +#endif #endif diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 8e67ebf98404..4c5f55c37349 100644 --- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -101,7 +101,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, pcb_tz = data->pcb_tz; /* In case pcb zone is available, use the extrapolation rule with it */ - if (!IS_ERR_OR_NULL(pcb_tz)) { + if (!IS_ERR(pcb_tz)) { ret = thermal_zone_get_temp(pcb_tz, &pcb_temp); if (!ret) { tmp -= pcb_temp; /* got a valid PCB temp */ @@ -124,7 +124,7 @@ static int ti_thermal_bind(struct thermal_zone_device *thermal, struct ti_thermal_data *data = thermal->devdata; int id; - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) return -ENODEV; /* check if this is the cooling device we registered */ @@ -146,7 +146,7 @@ static int ti_thermal_unbind(struct thermal_zone_device *thermal, { struct ti_thermal_data *data = thermal->devdata; - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) return -ENODEV; /* check if this is the cooling device we registered */ @@ -282,6 +282,7 @@ static struct ti_thermal_data data->sensor_id = id; data->bgp = bgp; data->mode = THERMAL_DEVICE_ENABLED; + /* pcb_tz will be either valid or PTR_ERR() */ data->pcb_tz = thermal_zone_get_zone_by_name("pcb"); INIT_WORK(&data->thermal_wq, ti_thermal_work); @@ -295,7 +296,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data = ti_bandgap_get_sensor_data(bgp, id); - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) data = ti_thermal_build_data(bgp, id); if (!data) @@ -306,7 +307,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops, NULL, FAST_TEMP_MONITORING_RATE, FAST_TEMP_MONITORING_RATE); - if (IS_ERR_OR_NULL(data->ti_thermal)) { + if (IS_ERR(data->ti_thermal)) { dev_err(bgp->dev, "thermal zone device is NULL\n"); return PTR_ERR(data->ti_thermal); } @@ -343,7 +344,7 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) struct ti_thermal_data *data; data = ti_bandgap_get_sensor_data(bgp, id); - if (IS_ERR_OR_NULL(data)) + if (!data || IS_ERR(data)) data = ti_thermal_build_data(bgp, id); if (!data) @@ -356,7 +357,7 @@ int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) /* Register cooling device */ data->cool_dev = cpufreq_cooling_register(cpu_present_mask); - if (IS_ERR_OR_NULL(data->cool_dev)) { + if (IS_ERR(data->cool_dev)) { dev_err(bgp->dev, "Failed to register cpufreq cooling device\n"); return PTR_ERR(data->cool_dev); diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h index 5055777727cc..f8b7ffea6194 100644 --- a/drivers/staging/ti-soc-thermal/ti-thermal.h +++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h @@ -38,6 +38,9 @@ #define OMAP_GRADIENT_SLOPE_5430_GPU 117 #define OMAP_GRADIENT_CONST_5430_GPU -2992 +#define DRA752_GRADIENT_SLOPE 0 +#define DRA752_GRADIENT_CONST 2000 + /* PCB sensor calculation constants */ #define OMAP_GRADIENT_SLOPE_W_PCB_4430 0 #define OMAP_GRADIENT_CONST_W_PCB_4430 20000 @@ -51,6 +54,9 @@ #define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU 464 #define OMAP_GRADIENT_CONST_W_PCB_5430_GPU -5102 +#define DRA752_GRADIENT_SLOPE_W_PCB 0 +#define DRA752_GRADIENT_CONST_W_PCB 2000 + /* trip points of interest in milicelsius (at hotspot level) */ #define OMAP_TRIP_COLD 100000 #define OMAP_TRIP_HOT 110000 diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c new file mode 100644 index 000000000000..5de56f671a9d --- /dev/null +++ b/drivers/thermal/x86_pkg_temp_thermal.c @@ -0,0 +1,642 @@ +/* + * x86_pkg_temp_thermal driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc. + * + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/param.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/thermal.h> +#include <linux/debugfs.h> +#include <asm/cpu_device_id.h> +#include <asm/mce.h> + +/* +* Rate control delay: Idea is to introduce denounce effect +* This should be long enough to avoid reduce events, when +* threshold is set to a temperature, which is constantly +* violated, but at the short enough to take any action. +* The action can be remove threshold or change it to next +* interesting setting. Based on experiments, in around +* every 5 seconds under load will give us a significant +* temperature change. +*/ +#define PKG_TEMP_THERMAL_NOTIFY_DELAY 5000 +static int notify_delay_ms = PKG_TEMP_THERMAL_NOTIFY_DELAY; +module_param(notify_delay_ms, int, 0644); +MODULE_PARM_DESC(notify_delay_ms, + "User space notification delay in milli seconds."); + +/* Number of trip points in thermal zone. Currently it can't +* be more than 2. MSR can allow setting and getting notifications +* for only 2 thresholds. This define enforces this, if there +* is some wrong values returned by cpuid for number of thresholds. +*/ +#define MAX_NUMBER_OF_TRIPS 2 + +struct phy_dev_entry { + struct list_head list; + u16 phys_proc_id; + u16 first_cpu; + u32 tj_max; + int ref_cnt; + u32 start_pkg_therm_low; + u32 start_pkg_therm_high; + struct thermal_zone_device *tzone; +}; + +/* List maintaining number of package instances */ +static LIST_HEAD(phy_dev_list); +static DEFINE_MUTEX(phy_dev_list_mutex); + +/* Interrupt to work function schedule queue */ +static DEFINE_PER_CPU(struct delayed_work, pkg_temp_thermal_threshold_work); + +/* To track if the work is already scheduled on a package */ +static u8 *pkg_work_scheduled; + +/* Spin lock to prevent races with pkg_work_scheduled */ +static spinlock_t pkg_work_lock; +static u16 max_phy_id; + +/* Debug counters to show using debugfs */ +static struct dentry *debugfs; +static unsigned int pkg_interrupt_cnt; +static unsigned int pkg_work_cnt; + +static int pkg_temp_debugfs_init(void) +{ + struct dentry *d; + + debugfs = debugfs_create_dir("pkg_temp_thermal", NULL); + if (!debugfs) + return -ENOENT; + + d = debugfs_create_u32("pkg_thres_interrupt", S_IRUGO, debugfs, + (u32 *)&pkg_interrupt_cnt); + if (!d) + goto err_out; + + d = debugfs_create_u32("pkg_thres_work", S_IRUGO, debugfs, + (u32 *)&pkg_work_cnt); + if (!d) + goto err_out; + + return 0; + +err_out: + debugfs_remove_recursive(debugfs); + return -ENOENT; +} + +static struct phy_dev_entry + *pkg_temp_thermal_get_phy_entry(unsigned int cpu) +{ + u16 phys_proc_id = topology_physical_package_id(cpu); + struct phy_dev_entry *phy_ptr; + + mutex_lock(&phy_dev_list_mutex); + + list_for_each_entry(phy_ptr, &phy_dev_list, list) + if (phy_ptr->phys_proc_id == phys_proc_id) { + mutex_unlock(&phy_dev_list_mutex); + return phy_ptr; + } + + mutex_unlock(&phy_dev_list_mutex); + + return NULL; +} + +/* +* tj-max is is interesting because threshold is set relative to this +* temperature. +*/ +static int get_tj_max(int cpu, u32 *tj_max) +{ + u32 eax, edx; + u32 val; + int err; + + err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); + if (err) + goto err_ret; + else { + val = (eax >> 16) & 0xff; + if (val) + *tj_max = val * 1000; + else { + err = -EINVAL; + goto err_ret; + } + } + + return 0; +err_ret: + *tj_max = 0; + return err; +} + +static int sys_get_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp) +{ + u32 eax, edx; + struct phy_dev_entry *phy_dev_entry; + + phy_dev_entry = tzd->devdata; + rdmsr_on_cpu(phy_dev_entry->first_cpu, MSR_IA32_PACKAGE_THERM_STATUS, + &eax, &edx); + if (eax & 0x80000000) { + *temp = phy_dev_entry->tj_max - + ((eax >> 16) & 0x7f) * 1000; + pr_debug("sys_get_curr_temp %ld\n", *temp); + return 0; + } + + return -EINVAL; +} + +static int sys_get_trip_temp(struct thermal_zone_device *tzd, + int trip, unsigned long *temp) +{ + u32 eax, edx; + struct phy_dev_entry *phy_dev_entry; + u32 mask, shift; + unsigned long thres_reg_value; + int ret; + + if (trip >= MAX_NUMBER_OF_TRIPS) + return -EINVAL; + + phy_dev_entry = tzd->devdata; + + if (trip) { + mask = THERM_MASK_THRESHOLD1; + shift = THERM_SHIFT_THRESHOLD1; + } else { + mask = THERM_MASK_THRESHOLD0; + shift = THERM_SHIFT_THRESHOLD0; + } + + ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, + MSR_IA32_PACKAGE_THERM_INTERRUPT, &eax, &edx); + if (ret < 0) + return -EINVAL; + + thres_reg_value = (eax & mask) >> shift; + if (thres_reg_value) + *temp = phy_dev_entry->tj_max - thres_reg_value * 1000; + else + *temp = 0; + pr_debug("sys_get_trip_temp %ld\n", *temp); + + return 0; +} + +int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, + unsigned long temp) +{ + u32 l, h; + struct phy_dev_entry *phy_dev_entry; + u32 mask, shift, intr; + int ret; + + phy_dev_entry = tzd->devdata; + + if (trip >= MAX_NUMBER_OF_TRIPS || temp >= phy_dev_entry->tj_max) + return -EINVAL; + + ret = rdmsr_on_cpu(phy_dev_entry->first_cpu, + MSR_IA32_PACKAGE_THERM_INTERRUPT, + &l, &h); + if (ret < 0) + return -EINVAL; + + if (trip) { + mask = THERM_MASK_THRESHOLD1; + shift = THERM_SHIFT_THRESHOLD1; + intr = THERM_INT_THRESHOLD1_ENABLE; + } else { + mask = THERM_MASK_THRESHOLD0; + shift = THERM_SHIFT_THRESHOLD0; + intr = THERM_INT_THRESHOLD0_ENABLE; + } + l &= ~mask; + /* + * When users space sets a trip temperature == 0, which is indication + * that, it is no longer interested in receiving notifications. + */ + if (!temp) + l &= ~intr; + else { + l |= (phy_dev_entry->tj_max - temp)/1000 << shift; + l |= intr; + } + + return wrmsr_on_cpu(phy_dev_entry->first_cpu, + MSR_IA32_PACKAGE_THERM_INTERRUPT, + l, h); +} + +static int sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + + *type = THERMAL_TRIP_PASSIVE; + + return 0; +} + +/* Thermal zone callback registry */ +static struct thermal_zone_device_ops tzone_ops = { + .get_temp = sys_get_curr_temp, + .get_trip_temp = sys_get_trip_temp, + .get_trip_type = sys_get_trip_type, + .set_trip_temp = sys_set_trip_temp, +}; + +static bool pkg_temp_thermal_platform_thermal_rate_control(void) +{ + return true; +} + +/* Enable threshold interrupt on local package/cpu */ +static inline void enable_pkg_thres_interrupt(void) +{ + u32 l, h; + u8 thres_0, thres_1; + + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + /* only enable/disable if it had valid threshold value */ + thres_0 = (l & THERM_MASK_THRESHOLD0) >> THERM_SHIFT_THRESHOLD0; + thres_1 = (l & THERM_MASK_THRESHOLD1) >> THERM_SHIFT_THRESHOLD1; + if (thres_0) + l |= THERM_INT_THRESHOLD0_ENABLE; + if (thres_1) + l |= THERM_INT_THRESHOLD1_ENABLE; + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); +} + +/* Disable threshold interrupt on local package/cpu */ +static inline void disable_pkg_thres_interrupt(void) +{ + u32 l, h; + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l & (~THERM_INT_THRESHOLD0_ENABLE) & + (~THERM_INT_THRESHOLD1_ENABLE), h); +} + +static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work) +{ + __u64 msr_val; + int cpu = smp_processor_id(); + int phy_id = topology_physical_package_id(cpu); + struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); + bool notify = false; + + if (!phdev) + return; + + spin_lock(&pkg_work_lock); + ++pkg_work_cnt; + if (unlikely(phy_id > max_phy_id)) { + spin_unlock(&pkg_work_lock); + return; + } + pkg_work_scheduled[phy_id] = 0; + spin_unlock(&pkg_work_lock); + + enable_pkg_thres_interrupt(); + rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); + if (msr_val & THERM_LOG_THRESHOLD0) { + wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, + msr_val & ~THERM_LOG_THRESHOLD0); + notify = true; + } + if (msr_val & THERM_LOG_THRESHOLD1) { + wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS, + msr_val & ~THERM_LOG_THRESHOLD1); + notify = true; + } + if (notify) { + pr_debug("thermal_zone_device_update\n"); + thermal_zone_device_update(phdev->tzone); + } +} + +static int pkg_temp_thermal_platform_thermal_notify(__u64 msr_val) +{ + unsigned long flags; + int cpu = smp_processor_id(); + int phy_id = topology_physical_package_id(cpu); + + /* + * When a package is in interrupted state, all CPU's in that package + * are in the same interrupt state. So scheduling on any one CPU in + * the package is enough and simply return for others. + */ + spin_lock_irqsave(&pkg_work_lock, flags); + ++pkg_interrupt_cnt; + if (unlikely(phy_id > max_phy_id) || unlikely(!pkg_work_scheduled) || + pkg_work_scheduled[phy_id]) { + disable_pkg_thres_interrupt(); + spin_unlock_irqrestore(&pkg_work_lock, flags); + return -EINVAL; + } + pkg_work_scheduled[phy_id] = 1; + spin_unlock_irqrestore(&pkg_work_lock, flags); + + disable_pkg_thres_interrupt(); + schedule_delayed_work_on(cpu, + &per_cpu(pkg_temp_thermal_threshold_work, cpu), + msecs_to_jiffies(notify_delay_ms)); + return 0; +} + +static int find_siblings_cpu(int cpu) +{ + int i; + int id = topology_physical_package_id(cpu); + + for_each_online_cpu(i) + if (i != cpu && topology_physical_package_id(i) == id) + return i; + + return 0; +} + +static int pkg_temp_thermal_device_add(unsigned int cpu) +{ + int err; + u32 tj_max; + struct phy_dev_entry *phy_dev_entry; + char buffer[30]; + int thres_count; + u32 eax, ebx, ecx, edx; + + cpuid(6, &eax, &ebx, &ecx, &edx); + thres_count = ebx & 0x07; + if (!thres_count) + return -ENODEV; + + thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS); + + err = get_tj_max(cpu, &tj_max); + if (err) + goto err_ret; + + mutex_lock(&phy_dev_list_mutex); + + phy_dev_entry = kzalloc(sizeof(*phy_dev_entry), GFP_KERNEL); + if (!phy_dev_entry) { + err = -ENOMEM; + goto err_ret_unlock; + } + + spin_lock(&pkg_work_lock); + if (topology_physical_package_id(cpu) > max_phy_id) + max_phy_id = topology_physical_package_id(cpu); + pkg_work_scheduled = krealloc(pkg_work_scheduled, + (max_phy_id+1) * sizeof(u8), GFP_ATOMIC); + if (!pkg_work_scheduled) { + spin_unlock(&pkg_work_lock); + err = -ENOMEM; + goto err_ret_free; + } + pkg_work_scheduled[topology_physical_package_id(cpu)] = 0; + spin_unlock(&pkg_work_lock); + + phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu); + phy_dev_entry->first_cpu = cpu; + phy_dev_entry->tj_max = tj_max; + phy_dev_entry->ref_cnt = 1; + snprintf(buffer, sizeof(buffer), "pkg-temp-%d\n", + phy_dev_entry->phys_proc_id); + phy_dev_entry->tzone = thermal_zone_device_register(buffer, + thres_count, + (thres_count == MAX_NUMBER_OF_TRIPS) ? + 0x03 : 0x01, + phy_dev_entry, &tzone_ops, NULL, 0, 0); + if (IS_ERR(phy_dev_entry->tzone)) { + err = PTR_ERR(phy_dev_entry->tzone); + goto err_ret_free; + } + /* Store MSR value for package thermal interrupt, to restore at exit */ + rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, + &phy_dev_entry->start_pkg_therm_low, + &phy_dev_entry->start_pkg_therm_high); + + list_add_tail(&phy_dev_entry->list, &phy_dev_list); + pr_debug("pkg_temp_thermal_device_add :phy_id %d cpu %d\n", + phy_dev_entry->phys_proc_id, cpu); + + mutex_unlock(&phy_dev_list_mutex); + + return 0; + +err_ret_free: + kfree(phy_dev_entry); +err_ret_unlock: + mutex_unlock(&phy_dev_list_mutex); + +err_ret: + return err; +} + +static int pkg_temp_thermal_device_remove(unsigned int cpu) +{ + struct phy_dev_entry *n; + u16 phys_proc_id = topology_physical_package_id(cpu); + struct phy_dev_entry *phdev = + pkg_temp_thermal_get_phy_entry(cpu); + + if (!phdev) + return -ENODEV; + + mutex_lock(&phy_dev_list_mutex); + /* If we are loosing the first cpu for this package, we need change */ + if (phdev->first_cpu == cpu) { + phdev->first_cpu = find_siblings_cpu(cpu); + pr_debug("thermal_device_remove: first cpu switched %d\n", + phdev->first_cpu); + } + /* + * It is possible that no siblings left as this was the last cpu + * going offline. We don't need to worry about this assignment + * as the phydev entry will be removed in this case and + * thermal zone is removed. + */ + --phdev->ref_cnt; + pr_debug("thermal_device_remove: pkg: %d cpu %d ref_cnt %d\n", + phys_proc_id, cpu, phdev->ref_cnt); + if (!phdev->ref_cnt) + list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { + if (phdev->phys_proc_id == phys_proc_id) { + thermal_zone_device_unregister(phdev->tzone); + list_del(&phdev->list); + kfree(phdev); + break; + } + } + mutex_unlock(&phy_dev_list_mutex); + + return 0; +} + +static int get_core_online(unsigned int cpu) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); + + /* Check if there is already an instance for this package */ + if (!phdev) { + if (!cpu_has(c, X86_FEATURE_DTHERM) && + !cpu_has(c, X86_FEATURE_PTS)) + return -ENODEV; + if (pkg_temp_thermal_device_add(cpu)) + return -ENODEV; + } else { + mutex_lock(&phy_dev_list_mutex); + ++phdev->ref_cnt; + pr_debug("get_core_online: cpu %d ref_cnt %d\n", + cpu, phdev->ref_cnt); + mutex_unlock(&phy_dev_list_mutex); + } + INIT_DELAYED_WORK(&per_cpu(pkg_temp_thermal_threshold_work, cpu), + pkg_temp_thermal_threshold_work_fn); + + pr_debug("get_core_online: cpu %d successful\n", cpu); + + return 0; +} + +static void put_core_offline(unsigned int cpu) +{ + if (!pkg_temp_thermal_device_remove(cpu)) + cancel_delayed_work_sync( + &per_cpu(pkg_temp_thermal_threshold_work, cpu)); + + pr_debug("put_core_offline: cpu %d\n", cpu); +} + +static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + get_core_online(cpu); + break; + case CPU_DOWN_PREPARE: + put_core_offline(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block pkg_temp_thermal_notifier __refdata = { + .notifier_call = pkg_temp_thermal_cpu_callback, +}; + +static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); + +static int __init pkg_temp_thermal_init(void) +{ + int i; + + if (!x86_match_cpu(pkg_temp_thermal_ids)) + return -ENODEV; + + spin_lock_init(&pkg_work_lock); + platform_thermal_package_notify = + pkg_temp_thermal_platform_thermal_notify; + platform_thermal_package_rate_control = + pkg_temp_thermal_platform_thermal_rate_control; + + get_online_cpus(); + for_each_online_cpu(i) + if (get_core_online(i)) + goto err_ret; + register_hotcpu_notifier(&pkg_temp_thermal_notifier); + put_online_cpus(); + + pkg_temp_debugfs_init(); /* Don't care if fails */ + + return 0; + +err_ret: + get_online_cpus(); + for_each_online_cpu(i) + put_core_offline(i); + put_online_cpus(); + kfree(pkg_work_scheduled); + platform_thermal_package_notify = NULL; + platform_thermal_package_rate_control = NULL; + + return -ENODEV; +} + +static void __exit pkg_temp_thermal_exit(void) +{ + struct phy_dev_entry *phdev, *n; + int i; + + get_online_cpus(); + unregister_hotcpu_notifier(&pkg_temp_thermal_notifier); + mutex_lock(&phy_dev_list_mutex); + list_for_each_entry_safe(phdev, n, &phy_dev_list, list) { + /* Retore old MSR value for package thermal interrupt */ + wrmsr_on_cpu(phdev->first_cpu, + MSR_IA32_PACKAGE_THERM_INTERRUPT, + phdev->start_pkg_therm_low, + phdev->start_pkg_therm_high); + thermal_zone_device_unregister(phdev->tzone); + list_del(&phdev->list); + kfree(phdev); + } + mutex_unlock(&phy_dev_list_mutex); + platform_thermal_package_notify = NULL; + platform_thermal_package_rate_control = NULL; + for_each_online_cpu(i) + cancel_delayed_work_sync( + &per_cpu(pkg_temp_thermal_threshold_work, i)); + put_online_cpus(); + + kfree(pkg_work_scheduled); + + debugfs_remove_recursive(debugfs); +} + +module_init(pkg_temp_thermal_init) +module_exit(pkg_temp_thermal_exit) + +MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver"); +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); |