diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_guc_loader.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_guc_loader.c | 153 |
1 files changed, 94 insertions, 59 deletions
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c index 34405de72dfa..f2b88c7209cb 100644 --- a/drivers/gpu/drm/i915/intel_guc_loader.c +++ b/drivers/gpu/drm/i915/intel_guc_loader.c @@ -103,6 +103,7 @@ static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv) { struct intel_engine_cs *engine; int irqs; + u32 tmp; /* tell all command streamers to forward interrupts and vblank to GuC */ irqs = _MASKED_FIELD(GFX_FORWARD_VBLANK_MASK, GFX_FORWARD_VBLANK_ALWAYS); @@ -117,6 +118,16 @@ static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv) I915_WRITE(GUC_BCS_RCS_IER, ~irqs); I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs); I915_WRITE(GUC_WD_VECS_IER, ~irqs); + + /* + * If GuC has routed PM interrupts to itself, don't keep it. + * and keep other interrupts those are unmasked by GuC. + */ + tmp = I915_READ(GEN6_PMINTRMSK); + if (tmp & GEN8_PMINTR_REDIRECT_TO_NON_DISP) { + dev_priv->rps.pm_intr_keep |= ~(tmp & ~GEN8_PMINTR_REDIRECT_TO_NON_DISP); + dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP; + } } static u32 get_gttype(struct drm_i915_private *dev_priv) @@ -386,65 +397,58 @@ static int i915_reset_guc(struct drm_i915_private *dev_priv) } /** - * intel_guc_ucode_load() - load GuC uCode into the device + * intel_guc_setup() - finish preparing the GuC for activity * @dev: drm device * * Called from gem_init_hw() during driver loading and also after a GPU reset. * + * The main action required here it to load the GuC uCode into the device. * The firmware image should have already been fetched into memory by the - * earlier call to intel_guc_ucode_init(), so here we need only check that - * is succeeded, and then transfer the image to the h/w. + * earlier call to intel_guc_init(), so here we need only check that worked, + * and then transfer the image to the h/w. * * Return: non-zero code on error */ -int intel_guc_ucode_load(struct drm_device *dev) +int intel_guc_setup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw; - int retries, err = 0; + const char *fw_path = guc_fw->guc_fw_path; + int retries, ret, err; - if (!i915.enable_guc_submission) - return 0; - - DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n", + DRM_DEBUG_DRIVER("GuC fw status: path %s, fetch %s, load %s\n", + fw_path, intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status), intel_guc_fw_status_repr(guc_fw->guc_fw_load_status)); - direct_interrupts_to_host(dev_priv); - - if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_NONE) - return 0; - - if (guc_fw->guc_fw_fetch_status == GUC_FIRMWARE_SUCCESS && - guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL) - return -ENOEXEC; - - guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING; - - DRM_DEBUG_DRIVER("GuC fw fetch status %s\n", - intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status)); + /* Loading forbidden, or no firmware to load? */ + if (!i915.enable_guc_loading) { + err = 0; + goto fail; + } else if (fw_path == NULL || *fw_path == '\0') { + if (*fw_path == '\0') + DRM_INFO("No GuC firmware known for this platform\n"); + err = -ENODEV; + goto fail; + } - switch (guc_fw->guc_fw_fetch_status) { - case GUC_FIRMWARE_FAIL: - /* something went wrong :( */ + /* Fetch failed, or already fetched but failed to load? */ + if (guc_fw->guc_fw_fetch_status != GUC_FIRMWARE_SUCCESS) { err = -EIO; goto fail; - - case GUC_FIRMWARE_NONE: - case GUC_FIRMWARE_PENDING: - default: - /* "can't happen" */ - WARN_ONCE(1, "GuC fw %s invalid guc_fw_fetch_status %s [%d]\n", - guc_fw->guc_fw_path, - intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status), - guc_fw->guc_fw_fetch_status); - err = -ENXIO; + } else if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_FAIL) { + err = -ENOEXEC; goto fail; - - case GUC_FIRMWARE_SUCCESS: - break; } + direct_interrupts_to_host(dev_priv); + + guc_fw->guc_fw_load_status = GUC_FIRMWARE_PENDING; + + DRM_DEBUG_DRIVER("GuC fw status: fetch %s, load %s\n", + intel_guc_fw_status_repr(guc_fw->guc_fw_fetch_status), + intel_guc_fw_status_repr(guc_fw->guc_fw_load_status)); + err = i915_guc_submission_init(dev); if (err) goto fail; @@ -462,7 +466,7 @@ int intel_guc_ucode_load(struct drm_device *dev) */ err = i915_reset_guc(dev_priv); if (err) { - DRM_ERROR("GuC reset failed, err %d\n", err); + DRM_ERROR("GuC reset failed: %d\n", err); goto fail; } @@ -473,8 +477,8 @@ int intel_guc_ucode_load(struct drm_device *dev) if (--retries == 0) goto fail; - DRM_INFO("GuC fw load failed, err %d; will reset and " - "retry %d more time(s)\n", err, retries); + DRM_INFO("GuC fw load failed: %d; will reset and " + "retry %d more time(s)\n", err, retries); } guc_fw->guc_fw_load_status = GUC_FIRMWARE_SUCCESS; @@ -496,7 +500,6 @@ int intel_guc_ucode_load(struct drm_device *dev) return 0; fail: - DRM_ERROR("GuC firmware load failed, err %d\n", err); if (guc_fw->guc_fw_load_status == GUC_FIRMWARE_PENDING) guc_fw->guc_fw_load_status = GUC_FIRMWARE_FAIL; @@ -504,7 +507,41 @@ fail: i915_guc_submission_disable(dev); i915_guc_submission_fini(dev); - return err; + /* + * We've failed to load the firmware :( + * + * Decide whether to disable GuC submission and fall back to + * execlist mode, and whether to hide the error by returning + * zero or to return -EIO, which the caller will treat as a + * nonfatal error (i.e. it doesn't prevent driver load, but + * marks the GPU as wedged until reset). + */ + if (i915.enable_guc_loading > 1) { + ret = -EIO; + } else if (i915.enable_guc_submission > 1) { + ret = -EIO; + } else { + ret = 0; + } + + if (err == 0) + DRM_INFO("GuC firmware load skipped\n"); + else if (ret == -EIO) + DRM_ERROR("GuC firmware load failed: %d\n", err); + else + DRM_INFO("GuC firmware load failed: %d\n", err); + + if (i915.enable_guc_submission) { + if (fw_path == NULL) + DRM_INFO("GuC submission without firmware not supported\n"); + if (ret == 0) + DRM_INFO("Falling back to execlist mode\n"); + else + DRM_ERROR("GuC init failed: %d\n", ret); + } + i915.enable_guc_submission = 0; + + return ret; } static void guc_fw_fetch(struct drm_device *dev, struct intel_guc_fw *guc_fw) @@ -629,22 +666,25 @@ fail: } /** - * intel_guc_ucode_init() - define parameters and fetch firmware + * intel_guc_init() - define parameters and fetch firmware * @dev: drm device * * Called early during driver load, but after GEM is initialised. * * The firmware will be transferred to the GuC's memory later, - * when intel_guc_ucode_load() is called. + * when intel_guc_setup() is called. */ -void intel_guc_ucode_init(struct drm_device *dev) +void intel_guc_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw; const char *fw_path; - if (!HAS_GUC_SCHED(dev)) - i915.enable_guc_submission = false; + /* A negative value means "use platform default" */ + if (i915.enable_guc_loading < 0) + i915.enable_guc_loading = HAS_GUC_UCODE(dev); + if (i915.enable_guc_submission < 0) + i915.enable_guc_submission = HAS_GUC_SCHED(dev); if (!HAS_GUC_UCODE(dev)) { fw_path = NULL; @@ -657,26 +697,21 @@ void intel_guc_ucode_init(struct drm_device *dev) guc_fw->guc_fw_major_wanted = 8; guc_fw->guc_fw_minor_wanted = 7; } else { - i915.enable_guc_submission = false; fw_path = ""; /* unknown device */ } - if (!i915.enable_guc_submission) - return; - guc_fw->guc_dev = dev; guc_fw->guc_fw_path = fw_path; guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_NONE; guc_fw->guc_fw_load_status = GUC_FIRMWARE_NONE; + /* Early (and silent) return if GuC loading is disabled */ + if (!i915.enable_guc_loading) + return; if (fw_path == NULL) return; - - if (*fw_path == '\0') { - DRM_ERROR("No GuC firmware known for this platform\n"); - guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_FAIL; + if (*fw_path == '\0') return; - } guc_fw->guc_fw_fetch_status = GUC_FIRMWARE_PENDING; DRM_DEBUG_DRIVER("GuC firmware pending, path %s\n", fw_path); @@ -685,10 +720,10 @@ void intel_guc_ucode_init(struct drm_device *dev) } /** - * intel_guc_ucode_fini() - clean up all allocated resources + * intel_guc_fini() - clean up all allocated resources * @dev: drm device */ -void intel_guc_ucode_fini(struct drm_device *dev) +void intel_guc_fini(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_guc_fw *guc_fw = &dev_priv->guc.guc_fw; |