1 files changed, 58 insertions, 411 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f192f58708c2..c92d593d1505 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -131,11 +131,6 @@ static void vlv_steal_power_sequencer(struct drm_device *dev,
 				      enum pipe pipe);
 static void intel_dp_unset_edid(struct intel_dp *intel_dp);
 
-static unsigned int intel_dp_unused_lane_mask(int lane_count)
-{
-	return ~((1 << lane_count) - 1) & 0xf;
-}
-
 static int
 intel_dp_max_link_bw(struct intel_dp  *intel_dp)
 {
@@ -775,6 +770,7 @@ static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
 	       DP_AUX_CH_CTL_TIME_OUT_1600us |
 	       DP_AUX_CH_CTL_RECEIVE_ERROR |
 	       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+	       DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(32) |
 	       DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
 }
 
@@ -1582,6 +1578,27 @@ found:
 				&pipe_config->dp_m2_n2);
 	}
 
+	/*
+	 * DPLL0 VCO may need to be adjusted to get the correct
+	 * clock for eDP. This will affect cdclk as well.
+	 */
+	if (is_edp(intel_dp) &&
+	    (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))) {
+		int vco;
+
+		switch (pipe_config->port_clock / 2) {
+		case 108000:
+		case 216000:
+			vco = 8640000;
+			break;
+		default:
+			vco = 8100000;
+			break;
+		}
+
+		to_intel_atomic_state(pipe_config->base.state)->cdclk_pll_vco = vco;
+	}
+
 	if (!HAS_DDI(dev))
 		intel_dp_set_clock(encoder, pipe_config);
 
@@ -2460,50 +2477,6 @@ static void vlv_post_disable_dp(struct intel_encoder *encoder)
 	intel_dp_link_down(intel_dp);
 }
 
-static void chv_data_lane_soft_reset(struct intel_encoder *encoder,
-				     bool reset)
-{
-	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	enum dpio_channel ch = vlv_dport_to_channel(enc_to_dig_port(&encoder->base));
-	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
-	enum pipe pipe = crtc->pipe;
-	uint32_t val;
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW0(ch));
-	if (reset)
-		val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
-	else
-		val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW0(ch), val);
-
-	if (crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW0(ch));
-		if (reset)
-			val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
-		else
-			val |= DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
-	}
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
-	val |= CHV_PCS_REQ_SOFTRESET_EN;
-	if (reset)
-		val &= ~DPIO_PCS_CLK_SOFT_RESET;
-	else
-		val |= DPIO_PCS_CLK_SOFT_RESET;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW1(ch), val);
-
-	if (crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW1(ch));
-		val |= CHV_PCS_REQ_SOFTRESET_EN;
-		if (reset)
-			val &= ~DPIO_PCS_CLK_SOFT_RESET;
-		else
-			val |= DPIO_PCS_CLK_SOFT_RESET;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
-	}
-}
-
 static void chv_post_disable_dp(struct intel_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
@@ -2811,266 +2784,38 @@ static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
 
 static void vlv_pre_enable_dp(struct intel_encoder *encoder)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel port = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-	u32 val;
-
-	mutex_lock(&dev_priv->sb_lock);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
-	val = 0;
-	if (pipe)
-		val |= (1<<21);
-	else
-		val &= ~(1<<21);
-	val |= 0x001000c4;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
-
-	mutex_unlock(&dev_priv->sb_lock);
+	vlv_phy_pre_encoder_enable(encoder);
 
 	intel_enable_dp(encoder);
 }
 
 static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
 {
-	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel port = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-
 	intel_dp_prepare(encoder);
 
-	/* Program Tx lane resets to default */
-	mutex_lock(&dev_priv->sb_lock);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
-			 DPIO_PCS_TX_LANE2_RESET |
-			 DPIO_PCS_TX_LANE1_RESET);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
-			 DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
-			 DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
-			 (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
-				 DPIO_PCS_CLK_SOFT_RESET);
-
-	/* Fix up inter-pair skew failure */
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
-	mutex_unlock(&dev_priv->sb_lock);
+	vlv_phy_pre_pll_enable(encoder);
 }
 
 static void chv_pre_enable_dp(struct intel_encoder *encoder)
 {
-	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel ch = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
-	int data, i, stagger;
-	u32 val;
-
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* allow hardware to manage TX FIFO reset source */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
-	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
-		val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
-	}
-
-	/* Program Tx lane latency optimal setting*/
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		/* Set the upar bit */
-		if (intel_crtc->config->lane_count == 1)
-			data = 0x0;
-		else
-			data = (i == 1) ? 0x0 : 0x1;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW14(ch, i),
-				data << DPIO_UPAR_SHIFT);
-	}
-
-	/* Data lane stagger programming */
-	if (intel_crtc->config->port_clock > 270000)
-		stagger = 0x18;
-	else if (intel_crtc->config->port_clock > 135000)
-		stagger = 0xd;
-	else if (intel_crtc->config->port_clock > 67500)
-		stagger = 0x7;
-	else if (intel_crtc->config->port_clock > 33750)
-		stagger = 0x4;
-	else
-		stagger = 0x2;
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
-	val |= DPIO_TX2_STAGGER_MASK(0x1f);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
-		val |= DPIO_TX2_STAGGER_MASK(0x1f);
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
-	}
-
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
-		       DPIO_LANESTAGGER_STRAP(stagger) |
-		       DPIO_LANESTAGGER_STRAP_OVRD |
-		       DPIO_TX1_STAGGER_MASK(0x1f) |
-		       DPIO_TX1_STAGGER_MULT(6) |
-		       DPIO_TX2_STAGGER_MULT(0));
-
-	if (intel_crtc->config->lane_count > 2) {
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
-			       DPIO_LANESTAGGER_STRAP(stagger) |
-			       DPIO_LANESTAGGER_STRAP_OVRD |
-			       DPIO_TX1_STAGGER_MASK(0x1f) |
-			       DPIO_TX1_STAGGER_MULT(7) |
-			       DPIO_TX2_STAGGER_MULT(5));
-	}
-
-	/* Deassert data lane reset */
-	chv_data_lane_soft_reset(encoder, false);
-
-	mutex_unlock(&dev_priv->sb_lock);
+	chv_phy_pre_encoder_enable(encoder);
 
 	intel_enable_dp(encoder);
 
 	/* Second common lane will stay alive on its own now */
-	if (dport->release_cl2_override) {
-		chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, false);
-		dport->release_cl2_override = false;
-	}
+	chv_phy_release_cl2_override(encoder);
 }
 
 static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
 {
-	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
-	struct drm_device *dev = encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(encoder->base.crtc);
-	enum dpio_channel ch = vlv_dport_to_channel(dport);
-	enum pipe pipe = intel_crtc->pipe;
-	unsigned int lane_mask =
-		intel_dp_unused_lane_mask(intel_crtc->config->lane_count);
-	u32 val;
-
 	intel_dp_prepare(encoder);
 
-	/*
-	 * Must trick the second common lane into life.
-	 * Otherwise we can't even access the PLL.
-	 */
-	if (ch == DPIO_CH0 && pipe == PIPE_B)
-		dport->release_cl2_override =
-			!chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1, true);
-
-	chv_phy_powergate_lanes(encoder, true, lane_mask);
-
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* Assert data lane reset */
-	chv_data_lane_soft_reset(encoder, true);
-
-	/* program left/right clock distribution */
-	if (pipe != PIPE_B) {
-		val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
-		val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
-		if (ch == DPIO_CH0)
-			val |= CHV_BUFLEFTENA1_FORCE;
-		if (ch == DPIO_CH1)
-			val |= CHV_BUFRIGHTENA1_FORCE;
-		vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
-	} else {
-		val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
-		val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
-		if (ch == DPIO_CH0)
-			val |= CHV_BUFLEFTENA2_FORCE;
-		if (ch == DPIO_CH1)
-			val |= CHV_BUFRIGHTENA2_FORCE;
-		vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
-	}
-
-	/* program clock channel usage */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
-	val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
-	if (pipe != PIPE_B)
-		val &= ~CHV_PCS_USEDCLKCHANNEL;
-	else
-		val |= CHV_PCS_USEDCLKCHANNEL;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
-		val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
-		if (pipe != PIPE_B)
-			val &= ~CHV_PCS_USEDCLKCHANNEL;
-		else
-			val |= CHV_PCS_USEDCLKCHANNEL;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
-	}
-
-	/*
-	 * This a a bit weird since generally CL
-	 * matches the pipe, but here we need to
-	 * pick the CL based on the port.
-	 */
-	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
-	if (pipe != PIPE_B)
-		val &= ~CHV_CMN_USEDCLKCHANNEL;
-	else
-		val |= CHV_CMN_USEDCLKCHANNEL;
-	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
-
-	mutex_unlock(&dev_priv->sb_lock);
+	chv_phy_pre_pll_enable(encoder);
 }
 
 static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
 {
-	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe;
-	u32 val;
-
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* disable left/right clock distribution */
-	if (pipe != PIPE_B) {
-		val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
-		val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
-		vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
-	} else {
-		val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
-		val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
-		vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
-	}
-
-	mutex_unlock(&dev_priv->sb_lock);
-
-	/*
-	 * Leave the power down bit cleared for at least one
-	 * lane so that chv_powergate_phy_ch() will power
-	 * on something when the channel is otherwise unused.
-	 * When the port is off and the override is removed
-	 * the lanes power down anyway, so otherwise it doesn't
-	 * really matter what the state of power down bits is
-	 * after this.
-	 */
-	chv_phy_powergate_lanes(encoder, false, 0x0);
+	chv_phy_post_pll_disable(encoder);
 }
 
 /*
@@ -3178,16 +2923,10 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
 
 static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct intel_crtc *intel_crtc =
-		to_intel_crtc(dport->base.base.crtc);
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
 	unsigned long demph_reg_value, preemph_reg_value,
 		uniqtranscale_reg_value;
 	uint8_t train_set = intel_dp->train_set[0];
-	enum dpio_channel port = vlv_dport_to_channel(dport);
-	int pipe = intel_crtc->pipe;
 
 	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
 	case DP_TRAIN_PRE_EMPH_LEVEL_0:
@@ -3262,37 +3001,18 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
 		return 0;
 	}
 
-	mutex_lock(&dev_priv->sb_lock);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
-			 uniqtranscale_reg_value);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0C782040);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
-	vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
-	mutex_unlock(&dev_priv->sb_lock);
+	vlv_set_phy_signal_level(encoder, demph_reg_value, preemph_reg_value,
+				 uniqtranscale_reg_value, 0);
 
 	return 0;
 }
 
-static bool chv_need_uniq_trans_scale(uint8_t train_set)
-{
-	return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&
-		(train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
-}
-
 static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
-	u32 deemph_reg_value, margin_reg_value, val;
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	u32 deemph_reg_value, margin_reg_value;
+	bool uniq_trans_scale = false;
 	uint8_t train_set = intel_dp->train_set[0];
-	enum dpio_channel ch = vlv_dport_to_channel(dport);
-	enum pipe pipe = intel_crtc->pipe;
-	int i;
 
 	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
 	case DP_TRAIN_PRE_EMPH_LEVEL_0:
@@ -3312,7 +3032,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 		case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
 			deemph_reg_value = 128;
 			margin_reg_value = 154;
-			/* FIXME extra to set for 1200 */
+			uniq_trans_scale = true;
 			break;
 		default:
 			return 0;
@@ -3364,88 +3084,8 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 		return 0;
 	}
 
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* Clear calc init */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-		val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-		val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-		val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-	}
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
-	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
-		val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-		val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
-	}
-
-	/* Program swing deemph */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
-		val &= ~DPIO_SWING_DEEMPH9P5_MASK;
-		val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
-	}
-
-	/* Program swing margin */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-
-		val &= ~DPIO_SWING_MARGIN000_MASK;
-		val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
-
-		/*
-		 * Supposedly this value shouldn't matter when unique transition
-		 * scale is disabled, but in fact it does matter. Let's just
-		 * always program the same value and hope it's OK.
-		 */
-		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
-		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
-
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
-	}
-
-	/*
-	 * The document said it needs to set bit 27 for ch0 and bit 26
-	 * for ch1. Might be a typo in the doc.
-	 * For now, for this unique transition scale selection, set bit
-	 * 27 for ch0 and ch1.
-	 */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
-		if (chv_need_uniq_trans_scale(train_set))
-			val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
-		else
-			val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
-	}
-
-	/* Start swing calculation */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-		val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-	}
-
-	mutex_unlock(&dev_priv->sb_lock);
+	chv_set_phy_signal_level(encoder, deemph_reg_value,
+				 margin_reg_value, uniq_trans_scale);
 
 	return 0;
 }
@@ -3714,7 +3354,6 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint8_t rev;
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, 0x000, intel_dp->dpcd,
 			     sizeof(intel_dp->dpcd)) < 0)
@@ -3771,6 +3410,15 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 			DRM_DEBUG_KMS("PSR2 %s on sink",
 				dev_priv->psr.psr2_support ? "supported" : "not supported");
 		}
+
+		/* Read the eDP Display control capabilities registers */
+		memset(intel_dp->edp_dpcd, 0, sizeof(intel_dp->edp_dpcd));
+		if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
+				(drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
+						intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) ==
+								sizeof(intel_dp->edp_dpcd)))
+			DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
+					intel_dp->edp_dpcd);
 	}
 
 	DRM_DEBUG_KMS("Display Port TPS3 support: source %s, sink %s\n",
@@ -3778,10 +3426,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
 		      yesno(drm_dp_tps3_supported(intel_dp->dpcd)));
 
 	/* Intermediate frequency support */
-	if (is_edp(intel_dp) &&
-	    (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] &	DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
-	    (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
-	    (rev >= 0x03)) { /* eDp v1.4 or higher */
+	if (is_edp(intel_dp) && (intel_dp->edp_dpcd[0] >= 0x03)) { /* eDp v1.4 or higher */
 		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
 		int i;
 
@@ -5725,8 +5370,11 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) {
 		fixed_mode = drm_mode_duplicate(dev,
 					dev_priv->vbt.lfp_lvds_vbt_mode);
-		if (fixed_mode)
+		if (fixed_mode) {
 			fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
+			connector->display_info.width_mm = fixed_mode->width_mm;
+			connector->display_info.height_mm = fixed_mode->height_mm;
+		}
 	}
 	mutex_unlock(&dev->mode_config.mutex);
 
@@ -5923,9 +5571,9 @@ fail:
 	return false;
 }
 
-void
-intel_dp_init(struct drm_device *dev,
-	      i915_reg_t output_reg, enum port port)
+bool intel_dp_init(struct drm_device *dev,
+		   i915_reg_t output_reg,
+		   enum port port)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_digital_port *intel_dig_port;
@@ -5935,7 +5583,7 @@ intel_dp_init(struct drm_device *dev,
 
 	intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
 	if (!intel_dig_port)
-		return;
+		return false;
 
 	intel_connector = intel_connector_alloc();
 	if (!intel_connector)
@@ -5945,7 +5593,7 @@ intel_dp_init(struct drm_device *dev,
 	encoder = &intel_encoder->base;
 
 	if (drm_encoder_init(dev, &intel_encoder->base, &intel_dp_enc_funcs,
-			     DRM_MODE_ENCODER_TMDS, NULL))
+			     DRM_MODE_ENCODER_TMDS, "DP %c", port_name(port)))
 		goto err_encoder_init;
 
 	intel_encoder->compute_config = intel_dp_compute_config;
@@ -5992,7 +5640,7 @@ intel_dp_init(struct drm_device *dev,
 	if (!intel_dp_init_connector(intel_dig_port, intel_connector))
 		goto err_init_connector;
 
-	return;
+	return true;
 
 err_init_connector:
 	drm_encoder_cleanup(encoder);
@@ -6000,8 +5648,7 @@ err_encoder_init:
 	kfree(intel_connector);
 err_connector_alloc:
 	kfree(intel_dig_port);
-
-	return;
+	return false;
 }
 
 void intel_dp_mst_suspend(struct drm_device *dev)