diff options
| -rw-r--r-- | drivers/w1/masters/mxc_w1.c | 39 |
1 files changed, 16 insertions, 23 deletions
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 6525b2c67da9..8e3de6aa88e8 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -10,24 +10,16 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * */ -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include "../w1.h" #include "../w1_int.h" -#include "../w1_log.h" /* According to the mx27 Datasheet the reset procedure should take up to about * 1350us. We set the timeout to 500*100us = 50ms for sure */ @@ -36,13 +28,13 @@ /* * MXC W1 Register offsets */ -#define MXC_W1_CONTROL 0x00 -#define MXC_W1_TIME_DIVIDER 0x02 -#define MXC_W1_RESET 0x04 -#define MXC_W1_COMMAND 0x06 -#define MXC_W1_TXRX 0x08 -#define MXC_W1_INTERRUPT 0x0A -#define MXC_W1_INTERRUPT_EN 0x0C +#define MXC_W1_CONTROL 0x00 +# define MXC_W1_CONTROL_RDST BIT(3) +# define MXC_W1_CONTROL_WR(x) BIT(5 - (x)) +# define MXC_W1_CONTROL_PST BIT(6) +# define MXC_W1_CONTROL_RPP BIT(7) +#define MXC_W1_TIME_DIVIDER 0x02 +#define MXC_W1_RESET 0x04 struct mxc_w1_device { void __iomem *regs; @@ -61,12 +53,12 @@ static u8 mxc_w1_ds2_reset_bus(void *data) unsigned int timeout_cnt = 0; struct mxc_w1_device *dev = data; - __raw_writeb(0x80, (dev->regs + MXC_W1_CONTROL)); + __raw_writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL)); while (1) { reg_val = __raw_readb(dev->regs + MXC_W1_CONTROL); - if (((reg_val >> 7) & 0x1) == 0 || + if (!(reg_val & MXC_W1_CONTROL_RPP) || timeout_cnt > MXC_W1_RESET_TIMEOUT) break; else @@ -74,7 +66,7 @@ static u8 mxc_w1_ds2_reset_bus(void *data) udelay(100); } - return (reg_val >> 6) & 0x1; + return !!(reg_val & MXC_W1_CONTROL_PST); } /* @@ -90,16 +82,16 @@ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit) * datasheet. */ - __raw_writeb((1 << (5 - bit)), ctrl_addr); + __raw_writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr); while (timeout_cnt--) { - if (!((__raw_readb(ctrl_addr) >> (5 - bit)) & 0x1)) + if (!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit))) break; udelay(1); } - return ((__raw_readb(ctrl_addr)) >> 3) & 0x1; + return !!(__raw_readb(ctrl_addr) & MXC_W1_CONTROL_RDST); } static int mxc_w1_probe(struct platform_device *pdev) @@ -177,6 +169,7 @@ MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids); static struct platform_driver mxc_w1_driver = { .driver = { .name = "mxc_w1", + .owner = THIS_MODULE, .of_match_table = mxc_w1_dt_ids, }, .probe = mxc_w1_probe, |