mfd: wm5110: Fix defaults array based on testing

My automated test is back and now can check defaults against the actual
hardware. This patch updates the defaults array for the differences
detected and removes a couple of completely unused registers.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 37 insertions, 45 deletions

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index c18e11f42b3f..8e74e71507e7 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -676,8 +676,8 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000008, 0x0019 },    /* R8     - Ctrl IF SPI CFG 1 */
 	{ 0x00000009, 0x0001 },    /* R9     - Ctrl IF I2C1 CFG 1 */
 	{ 0x0000000A, 0x0001 },    /* R10    - Ctrl IF I2C2 CFG 1 */
-	{ 0x0000000B, 0x0036 },    /* R11    - Ctrl IF I2C1 CFG 2 */
-	{ 0x0000000C, 0x0036 },    /* R12    - Ctrl IF I2C2 CFG 2 */
+	{ 0x0000000B, 0x001A },    /* R11    - Ctrl IF I2C1 CFG 2 */
+	{ 0x0000000C, 0x001A },    /* R12    - Ctrl IF I2C2 CFG 2 */
 	{ 0x00000020, 0x0000 },    /* R32    - Tone Generator 1 */
 	{ 0x00000021, 0x1000 },    /* R33    - Tone Generator 2 */
 	{ 0x00000022, 0x0000 },    /* R34    - Tone Generator 3 */
@@ -723,14 +723,12 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000154, 0x0000 },    /* R340   - Rate Estimator 3 */
 	{ 0x00000155, 0x0000 },    /* R341   - Rate Estimator 4 */
 	{ 0x00000156, 0x0000 },    /* R342   - Rate Estimator 5 */
-	{ 0x00000171, 0x0000 },    /* R369   - FLL1 Control 1 */
+	{ 0x00000171, 0x0002 },    /* R369   - FLL1 Control 1 */
 	{ 0x00000172, 0x0008 },    /* R370   - FLL1 Control 2 */
 	{ 0x00000173, 0x0018 },    /* R371   - FLL1 Control 3 */
 	{ 0x00000174, 0x007D },    /* R372   - FLL1 Control 4 */
 	{ 0x00000175, 0x0006 },    /* R373   - FLL1 Control 5 */
 	{ 0x00000176, 0x0000 },    /* R374   - FLL1 Control 6 */
-	{ 0x00000177, 0x0281 },    /* R375   - FLL1 Loop Filter Test 1 */
-	{ 0x00000178, 0x0000 },    /* R376   - FLL1 NCO Test 0 */
 	{ 0x00000179, 0x0000 },    /* R376   - FLL1 Control 7 */
 	{ 0x00000181, 0x0000 },    /* R385   - FLL1 Synchroniser 1 */
 	{ 0x00000182, 0x0000 },    /* R386   - FLL1 Synchroniser 2 */
@@ -740,15 +738,13 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000186, 0x0000 },    /* R390   - FLL1 Synchroniser 6 */
 	{ 0x00000187, 0x0001 },    /* R390   - FLL1 Synchroniser 7 */
 	{ 0x00000189, 0x0000 },    /* R393   - FLL1 Spread Spectrum */
-	{ 0x0000018A, 0x0004 },    /* R394   - FLL1 GPIO Clock */
-	{ 0x00000191, 0x0000 },    /* R401   - FLL2 Control 1 */
+	{ 0x0000018A, 0x000C },    /* R394   - FLL1 GPIO Clock */
+	{ 0x00000191, 0x0002 },    /* R401   - FLL2 Control 1 */
 	{ 0x00000192, 0x0008 },    /* R402   - FLL2 Control 2 */
 	{ 0x00000193, 0x0018 },    /* R403   - FLL2 Control 3 */
 	{ 0x00000194, 0x007D },    /* R404   - FLL2 Control 4 */
 	{ 0x00000195, 0x000C },    /* R405   - FLL2 Control 5 */
 	{ 0x00000196, 0x0000 },    /* R406   - FLL2 Control 6 */
-	{ 0x00000197, 0x0000 },    /* R407   - FLL2 Loop Filter Test 1 */
-	{ 0x00000198, 0x0000 },    /* R408   - FLL2 NCO Test 0 */
 	{ 0x00000199, 0x0000 },    /* R408   - FLL2 Control 7 */
 	{ 0x000001A1, 0x0000 },    /* R417   - FLL2 Synchroniser 1 */
 	{ 0x000001A2, 0x0000 },    /* R418   - FLL2 Synchroniser 2 */
@@ -758,7 +754,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000001A6, 0x0000 },    /* R422   - FLL2 Synchroniser 6 */
 	{ 0x000001A7, 0x0001 },    /* R422   - FLL2 Synchroniser 7 */
 	{ 0x000001A9, 0x0000 },    /* R425   - FLL2 Spread Spectrum */
-	{ 0x000001AA, 0x0004 },    /* R426   - FLL2 GPIO Clock */
+	{ 0x000001AA, 0x000C },    /* R426   - FLL2 GPIO Clock */
 	{ 0x00000200, 0x0006 },    /* R512   - Mic Charge Pump 1 */
 	{ 0x00000210, 0x0184 },    /* R528   - LDO1 Control 1 */
 	{ 0x00000213, 0x03E4 },    /* R531   - LDO2 Control 1 */
@@ -771,9 +767,9 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000002A3, 0x1102 },    /* R675   - Mic Detect 1 */
 	{ 0x000002A4, 0x009F },    /* R676   - Mic Detect 2 */
 	{ 0x000002A6, 0x3737 },    /* R678   - Mic Detect Level 1 */
-	{ 0x000002A7, 0x372C },    /* R679   - Mic Detect Level 2 */
+	{ 0x000002A7, 0x2C37 },    /* R679   - Mic Detect Level 2 */
 	{ 0x000002A8, 0x1422 },    /* R680   - Mic Detect Level 3 */
-	{ 0x000002A9, 0x300A },    /* R681   - Mic Detect Level 4 */
+	{ 0x000002A9, 0x030A },    /* R681   - Mic Detect Level 4 */
 	{ 0x000002C3, 0x0000 },    /* R707   - Mic noise mix control 1 */
 	{ 0x000002CB, 0x0000 },    /* R715   - Isolation control */
 	{ 0x000002D3, 0x0000 },    /* R723   - Jack detect analogue */
@@ -810,53 +806,53 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000409, 0x0022 },    /* R1033  - Output Volume Ramp */
 	{ 0x00000410, 0x0080 },    /* R1040  - Output Path Config 1L */
 	{ 0x00000411, 0x0180 },    /* R1041  - DAC Digital Volume 1L */
-	{ 0x00000412, 0x0080 },    /* R1042  - DAC Volume Limit 1L */
+	{ 0x00000412, 0x0081 },    /* R1042  - DAC Volume Limit 1L */
 	{ 0x00000413, 0x0001 },    /* R1043  - Noise Gate Select 1L */
 	{ 0x00000414, 0x0080 },    /* R1044  - Output Path Config 1R */
 	{ 0x00000415, 0x0180 },    /* R1045  - DAC Digital Volume 1R */
-	{ 0x00000416, 0x0080 },    /* R1046  - DAC Volume Limit 1R */
+	{ 0x00000416, 0x0081 },    /* R1046  - DAC Volume Limit 1R */
 	{ 0x00000417, 0x0002 },    /* R1047  - Noise Gate Select 1R */
 	{ 0x00000418, 0x0080 },    /* R1048  - Output Path Config 2L */
 	{ 0x00000419, 0x0180 },    /* R1049  - DAC Digital Volume 2L */
-	{ 0x0000041A, 0x0080 },    /* R1050  - DAC Volume Limit 2L */
+	{ 0x0000041A, 0x0081 },    /* R1050  - DAC Volume Limit 2L */
 	{ 0x0000041B, 0x0004 },    /* R1051  - Noise Gate Select 2L */
 	{ 0x0000041C, 0x0080 },    /* R1052  - Output Path Config 2R */
 	{ 0x0000041D, 0x0180 },    /* R1053  - DAC Digital Volume 2R */
-	{ 0x0000041E, 0x0080 },    /* R1054  - DAC Volume Limit 2R */
+	{ 0x0000041E, 0x0081 },    /* R1054  - DAC Volume Limit 2R */
 	{ 0x0000041F, 0x0008 },    /* R1055  - Noise Gate Select 2R */
 	{ 0x00000420, 0x0080 },    /* R1056  - Output Path Config 3L */
 	{ 0x00000421, 0x0180 },    /* R1057  - DAC Digital Volume 3L */
-	{ 0x00000422, 0x0080 },    /* R1058  - DAC Volume Limit 3L */
+	{ 0x00000422, 0x0081 },    /* R1058  - DAC Volume Limit 3L */
 	{ 0x00000423, 0x0010 },    /* R1059  - Noise Gate Select 3L */
 	{ 0x00000424, 0x0080 },    /* R1060  - Output Path Config 3R */
 	{ 0x00000425, 0x0180 },    /* R1061  - DAC Digital Volume 3R */
-	{ 0x00000426, 0x0080 },    /* R1062  - DAC Volume Limit 3R */
+	{ 0x00000426, 0x0081 },    /* R1062  - DAC Volume Limit 3R */
 	{ 0x00000427, 0x0020 },    /* R1063  - Noise Gate Select 3R */
 	{ 0x00000428, 0x0000 },    /* R1064  - Output Path Config 4L */
 	{ 0x00000429, 0x0180 },    /* R1065  - DAC Digital Volume 4L */
-	{ 0x0000042A, 0x0080 },    /* R1066  - Out Volume 4L */
+	{ 0x0000042A, 0x0081 },    /* R1066  - Out Volume 4L */
 	{ 0x0000042B, 0x0040 },    /* R1067  - Noise Gate Select 4L */
 	{ 0x0000042C, 0x0000 },    /* R1068  - Output Path Config 4R */
 	{ 0x0000042D, 0x0180 },    /* R1069  - DAC Digital Volume 4R */
-	{ 0x0000042E, 0x0080 },    /* R1070  - Out Volume 4R */
+	{ 0x0000042E, 0x0081 },    /* R1070  - Out Volume 4R */
 	{ 0x0000042F, 0x0080 },    /* R1071  - Noise Gate Select 4R */
 	{ 0x00000430, 0x0000 },    /* R1072  - Output Path Config 5L */
 	{ 0x00000431, 0x0180 },    /* R1073  - DAC Digital Volume 5L */
-	{ 0x00000432, 0x0080 },    /* R1074  - DAC Volume Limit 5L */
+	{ 0x00000432, 0x0081 },    /* R1074  - DAC Volume Limit 5L */
 	{ 0x00000433, 0x0100 },    /* R1075  - Noise Gate Select 5L */
 	{ 0x00000434, 0x0000 },    /* R1076  - Output Path Config 5R */
 	{ 0x00000435, 0x0180 },    /* R1077  - DAC Digital Volume 5R */
-	{ 0x00000436, 0x0080 },    /* R1078  - DAC Volume Limit 5R */
+	{ 0x00000436, 0x0081 },    /* R1078  - DAC Volume Limit 5R */
 	{ 0x00000437, 0x0200 },    /* R1079  - Noise Gate Select 5R */
 	{ 0x00000438, 0x0000 },    /* R1080  - Output Path Config 6L */
 	{ 0x00000439, 0x0180 },    /* R1081  - DAC Digital Volume 6L */
-	{ 0x0000043A, 0x0080 },    /* R1082  - DAC Volume Limit 6L */
+	{ 0x0000043A, 0x0081 },    /* R1082  - DAC Volume Limit 6L */
 	{ 0x0000043B, 0x0400 },    /* R1083  - Noise Gate Select 6L */
 	{ 0x0000043C, 0x0000 },    /* R1084  - Output Path Config 6R */
 	{ 0x0000043D, 0x0180 },    /* R1085  - DAC Digital Volume 6R */
-	{ 0x0000043E, 0x0080 },    /* R1086  - DAC Volume Limit 6R */
+	{ 0x0000043E, 0x0081 },    /* R1086  - DAC Volume Limit 6R */
 	{ 0x0000043F, 0x0800 },    /* R1087  - Noise Gate Select 6R */
-	{ 0x00000440, 0x8FFF },    /* R1088  - DRE Enable */
+	{ 0x00000440, 0x003F },    /* R1088  - DRE Enable */
 	{ 0x00000450, 0x0000 },    /* R1104  - DAC AEC Control 1 */
 	{ 0x00000458, 0x0000 },    /* R1112  - Noise Gate Control */
 	{ 0x00000490, 0x0069 },    /* R1168  - PDM SPK1 CTRL 1 */
@@ -864,8 +860,8 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000492, 0x0069 },    /* R1170  - PDM SPK2 CTRL 1 */
 	{ 0x00000493, 0x0000 },    /* R1171  - PDM SPK2 CTRL 2 */
 	{ 0x000004A0, 0x3480 },    /* R1184  - HP1 Short Circuit Ctrl */
-	{ 0x000004A1, 0x3480 },    /* R1185  - HP2 Short Circuit Ctrl */
-	{ 0x000004A2, 0x3480 },    /* R1186  - HP3 Short Circuit Ctrl */
+	{ 0x000004A1, 0x3400 },    /* R1185  - HP2 Short Circuit Ctrl */
+	{ 0x000004A2, 0x3400 },    /* R1186  - HP3 Short Circuit Ctrl */
 	{ 0x00000500, 0x000C },    /* R1280  - AIF1 BCLK Ctrl */
 	{ 0x00000501, 0x0008 },    /* R1281  - AIF1 Tx Pin Ctrl */
 	{ 0x00000502, 0x0000 },    /* R1282  - AIF1 Rx Pin Ctrl */
@@ -1483,23 +1479,23 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000C10, 0x1000 },    /* R3088  - GPIO Debounce Config */
 	{ 0x00000C18, 0x0000 },    /* R3096  - GP Switch 1 */
 	{ 0x00000C20, 0x8002 },    /* R3104  - Misc Pad Ctrl 1 */
-	{ 0x00000C21, 0x8001 },    /* R3105  - Misc Pad Ctrl 2 */
+	{ 0x00000C21, 0x0001 },    /* R3105  - Misc Pad Ctrl 2 */
 	{ 0x00000C22, 0x0000 },    /* R3106  - Misc Pad Ctrl 3 */
 	{ 0x00000C23, 0x0000 },    /* R3107  - Misc Pad Ctrl 4 */
 	{ 0x00000C24, 0x0000 },    /* R3108  - Misc Pad Ctrl 5 */
 	{ 0x00000C25, 0x0000 },    /* R3109  - Misc Pad Ctrl 6 */
-	{ 0x00000C30, 0x8282 },    /* R3120  - Misc Pad Ctrl 7 */
-	{ 0x00000C31, 0x0082 },    /* R3121  - Misc Pad Ctrl 8 */
-	{ 0x00000C32, 0x8282 },    /* R3122  - Misc Pad Ctrl 9 */
-	{ 0x00000C33, 0x8282 },    /* R3123  - Misc Pad Ctrl 10 */
-	{ 0x00000C34, 0x8282 },    /* R3124  - Misc Pad Ctrl 11 */
-	{ 0x00000C35, 0x8282 },    /* R3125  - Misc Pad Ctrl 12 */
-	{ 0x00000C36, 0x8282 },    /* R3126  - Misc Pad Ctrl 13 */
-	{ 0x00000C37, 0x8282 },    /* R3127  - Misc Pad Ctrl 14 */
-	{ 0x00000C38, 0x8282 },    /* R3128  - Misc Pad Ctrl 15 */
-	{ 0x00000C39, 0x8282 },    /* R3129  - Misc Pad Ctrl 16 */
-	{ 0x00000C3A, 0x8282 },    /* R3130  - Misc Pad Ctrl 17 */
-	{ 0x00000C3B, 0x8282 },    /* R3131  - Misc Pad Ctrl 18 */
+	{ 0x00000C30, 0x0404 },    /* R3120  - Misc Pad Ctrl 7 */
+	{ 0x00000C31, 0x0004 },    /* R3121  - Misc Pad Ctrl 8 */
+	{ 0x00000C32, 0x0404 },    /* R3122  - Misc Pad Ctrl 9 */
+	{ 0x00000C33, 0x0404 },    /* R3123  - Misc Pad Ctrl 10 */
+	{ 0x00000C34, 0x0404 },    /* R3124  - Misc Pad Ctrl 11 */
+	{ 0x00000C35, 0x0404 },    /* R3125  - Misc Pad Ctrl 12 */
+	{ 0x00000C36, 0x0404 },    /* R3126  - Misc Pad Ctrl 13 */
+	{ 0x00000C37, 0x0404 },    /* R3127  - Misc Pad Ctrl 14 */
+	{ 0x00000C38, 0x0004 },    /* R3128  - Misc Pad Ctrl 15 */
+	{ 0x00000C39, 0x0404 },    /* R3129  - Misc Pad Ctrl 16 */
+	{ 0x00000C3A, 0x0404 },    /* R3130  - Misc Pad Ctrl 17 */
+	{ 0x00000C3B, 0x0404 },    /* R3131  - Misc Pad Ctrl 18 */
 	{ 0x00000D08, 0xFFFF },    /* R3336  - Interrupt Status 1 Mask */
 	{ 0x00000D09, 0xFFFF },    /* R3337  - Interrupt Status 2 Mask */
 	{ 0x00000D0A, 0xFFFF },    /* R3338  - Interrupt Status 3 Mask */
@@ -1641,7 +1637,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000F0D, 0x0000 },    /* R3853  - ANC Coefficient */
 	{ 0x00000F0E, 0x0000 },    /* R3854  - ANC Coefficient */
 	{ 0x00000F0F, 0x0000 },    /* R3855  - ANC Coefficient */
-	{ 0x00000F10, 0x0000 },    /* R3856  - ANC Coefficient */
+	{ 0x00000F10, 0x0001 },    /* R3856  - ANC Coefficient */
 	{ 0x00000F11, 0x0000 },    /* R3857  - ANC Coefficient */
 	{ 0x00000F12, 0x0000 },    /* R3858  - ANC Coefficient */
 	{ 0x00000F15, 0x0000 },    /* R3861  - FCL Filter Control */
@@ -1947,8 +1943,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL1_CONTROL_5:
 	case ARIZONA_FLL1_CONTROL_6:
 	case ARIZONA_FLL1_CONTROL_7:
-	case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL1_NCO_TEST_0:
 	case ARIZONA_FLL1_SYNCHRONISER_1:
 	case ARIZONA_FLL1_SYNCHRONISER_2:
 	case ARIZONA_FLL1_SYNCHRONISER_3:
@@ -1965,8 +1959,6 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_CONTROL_5:
 	case ARIZONA_FLL2_CONTROL_6:
 	case ARIZONA_FLL2_CONTROL_7:
-	case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
-	case ARIZONA_FLL2_NCO_TEST_0:
 	case ARIZONA_FLL2_SYNCHRONISER_1:
 	case ARIZONA_FLL2_SYNCHRONISER_2:
 	case ARIZONA_FLL2_SYNCHRONISER_3: