summaryrefslogtreecommitdiff
path: root/hw/qdev.c
AgeCommit message (Collapse)AuthorFilesLines
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini1-882/+0
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-02qdev: only send deleted event if device was realizedAnthony Liguori1-9/+14
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1364402174-16580-1-git-send-email-aliguori@us.ibm.com
2013-03-26Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-0/+14
virtio,pci,qom Work by Alex to support VGA assignment, pci and virtio fixes by Stefan, Jason and myself, and a new qmp event for hotplug support by myself. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Alex Williamson (13) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: (23 commits) pcie: Add endpoint capability initialization wrapper roms: switch oldnoconfig to olddefconfig pcie: Mangle types to match topology pci: Create and use API to determine root buses pci: Create pci_bus_is_express helper pci: Q35, Root Ports, and Switches create PCI Express buses pci: Allow PCI bus creation interfaces to specify the type of bus pci: Move PCI and PCIE type defines pci: Create and register a new PCI Express TypeInfo exec: assert that RAMBlock size is non-zero pci: refuse empty ROM files pci_bridge: Remove duplicate IRQ swizzle function pci_bridge: Use a default map_irq function pci: Fix INTx routing notifier recursion pci_bridge: drop formatting from source pci_bridge: factor out common code pci: Teach PCI Bridges about VGA routing pci: Add PCI VGA helpers virtio-pci: guest notifier mask without non-irqfd virtio-net: remove layout assumptions for mq ctrl ...
2013-03-26qmp: add path to device_deleted eventMichael S. Tsirkin1-2/+5
Add QOM path to device deleted event. It now becomes useful to report it for devices which don't have an ID assigned. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-26hw/qdev: Abort rather than ignoring errors adding device propertiesPeter Maydell1-3/+7
Instead of ignoring any errors that occur when adding properties to a new device in device_initfn(), check for them and abort if any occur. The most likely cause is accidentally adding a duplicate property, which is a programming error by the device author. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1364217314-7400-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26hw/qdev-properties.c: Improve diagnostic for setting property after realizePeter Maydell1-1/+1
Now we have error_setg() we can improve the error message emitted if you attempt to set a property of a device after the device is realized (the previous message was "permission denied" which was not very informative). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1364218844-7509-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-22qdev: remove redundant abort()liguang1-2/+1
Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-17qdev: DEVICE_DELETED eventMichael S. Tsirkin1-0/+11
libvirt has a long-standing bug: when removing the device, it can request removal but does not know when the removal completes. Add an event so we can fix this in a robust way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini1-1/+1
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini1-0/+1
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-11error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-2/+2
Commit 6daf194d and be62a2eb got rid of a bunch, but they keep coming back. Tracked down with this Coccinelle semantic patch: @r@ expression err, eno, cls, fmt; position p; @@ ( error_report(fmt, ...)@p | error_set(err, cls, fmt, ...)@p | error_set_errno(err, eno, cls, fmt, ...)@p | error_setg(err, fmt, ...)@p | error_setg_errno(err, eno, fmt, ...)@p ) @script:python@ fmt << r.fmt; p << r.p; @@ if "\\n" in str(fmt): print "%s:%s:%s:%s" % (p[0].file, p[0].line, p[0].column, fmt) Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1360354939-10994-4-git-send-email-armbru@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: drop extra references at creation timePaolo Bonzini1-3/+2
qdev_free and qbus_free have to do unparent+unref, because nobody else drops the initial reference (the one included by object_initialize) before them. For device_init_func and do_device_add, this is trivially correct, since the DeviceState goes out of scope. For qdev_create, qdev_try_create and qbus_init, it is a bit more tricky. What we are doing here is just assuming that the caller knows what it's doing, and won't call qdev_free/qbus_free while the device is still there. This is a pretty reasonable assumption and (behind the scenes) is also what GObject/GTK does. GTK actually has a "floating reference" that goes away as soon as the caller does gtk_container_add or something like that, but in the end qbus_init and qdev_try_create are already adding the new object to its qdev parent! So in the end the two solutions are the same. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: inline object_delete into qbus_free/qdev_freePaolo Bonzini1-2/+4
We want object_delete to disappear, and we will do this one class at a time. Inline it for the qdev case, which we will tackle first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: add reference for the bus while it is referred to by the DeviceStatePaolo Bonzini1-0/+3
Now that the unparent callbacks are complete, we can correctly account more missing references. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: move unrealization of devices from finalize to unparentPaolo Bonzini1-18/+17
Similarly, a bus holds a reference back to the device, and this will prevent the device from going away as soon as this reference is counted properly. To avoid this, move the unrealization of devices to the unparent callback. This includes recursively unparenting all the buses and (after the previous patch) the devices on those buses, which ensures that the web of references completely disappears for all devices that reside (in the qdev tree) below the one being unplugged. After this patch, the qdev tree and the bus<->child relationship is defined as "A is above B, iff unplugging A will automatically unplug B". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: move deletion of children from finalize to unparentPaolo Bonzini1-12/+25
A device will never be finalized as long as it has a reference from other devices that sit on its buses. To ensure that the references go away, deassociate a bus from its children in the unparent callback for the bus. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: add reference count to a device for the BusChildPaolo Bonzini1-0/+5
Each device has a reference through the BusChild. This reference was not accounted for, add it now. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: change first argument of qbus_create_inplace to void *Paolo Bonzini1-1/+1
Make it clear that no BUS() macro is needed in the callers (in fact it wouldn't work because the object has not been initialized yet with the right class). Suggested-by: Andreas Faerber <afaerber@suse.de> Acked-by: Andreas F=E4rber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01qdev: remove duplication between qbus_create and qbus_create_inplacePaolo Bonzini1-11/+7
Move the common part to qbus_realize. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-15qdev: Prepare "realized" propertyAndreas Färber1-23/+71
Introduce the QOM realizefn suggested by Anthony. Detailed documentation is supplied in the qdev header. For now this implements a default DeviceClass::realize callback that just wraps DeviceClass::init, which it deprecates. Once all devices have been converted to DeviceClass::realize, DeviceClass::init is to be removed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-15qdev: Fold state enum into bool realizedAndreas Färber1-6/+6
Whether the device was initialized or not is QOM-level information and currently unused. Drop it from device. This leaves the boolean state of whether or not DeviceClass::init was called or not, a.k.a. "realized". Suggested-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10qdev: add qbus_reset_allPaolo Bonzini1-1/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-10Make all static TypeInfos constAndreas Färber1-1/+1
Since 39bffca2030950ef6efe57c2fac8327a45ae1015 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-08qdev: Don't assume existence of parent bus on unparentingAndreas Färber1-3/+5
Commit 667d22d1ae59da46b4c1fbd094ca61145f19b8c3 (qdev: move bus removal to object_unparent) made the assumption that at unparenting time parent_bus is not NULL. This assumption is unjustified since object_unparent() may well be called directly after object_initialize(), without any qdev_set_parent_bus(). This did not cause any issues yet because qdev_[try_]create() does call qdev_set_parent_bus(), falling back to SysBus if unsupplied. While at it, ensure that this new function uses the device_ prefix and make the name more neutral in light of this semantic change. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Igor Mammedov <imammedo@redhat.com>
2012-12-23Merge branch 'master' of git://git.qemu.org/qemu into qom-cpuAndreas Färber1-3/+3
Adapt header include paths. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19qdev-properties.c: Separate core from the code used only by qemu-system-*Eduardo Habkost1-14/+0
This separates the qdev properties code in two parts: - qdev-properties.c, that contains most of the qdev properties code; - qdev-properties-system.c for code specific for qemu-system-*, containing: - Property types: drive, chr, netdev, vlan, that depend on code that won't be included on *-user - qemu_add_globals(), that depends on qemu-config.o. This change should help on two things: - Allowing DeviceState to be used by *-user without pulling dependencies that are specific for qemu-system-*; - Writing qdev unit tests without pulling too many dependencies. The copyright/license of qdev-properties.c isn't explicitly stated at the file, so add a simple copyright/license header pointing to the commit ID of the original file. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19qdev: Coding style fixesEduardo Habkost1-1/+2
Add missing braces and break lines larger than 80 chars. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini1-1/+1
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-06qdev: qdev_create(): use error_report() instead of hw_error()Eduardo Habkost1-3/+5
hw_error() is specific for fatal hardware emulation errors, not for internal errors related to the qdev object/class abstraction or object initialization. Replace it with an error_report() call, followed by abort(). This will also help reduce dependencies of the qdev code (as hw_error() is from cpus.o, and depends on the CPU list from exec.o). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-11-26qdev: simplify (de)allocation of busesPaolo Bonzini1-9/+1
All conditional deallocation can now be done with object_delete. Remove the @qom_allocated and @glib_allocated fields; replace the latter with a direct assignment of the @free function pointer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26qdev: move bus removal to object_unparentPaolo Bonzini1-3/+13
Add an ObjectClass method that is done at object_unparent time. It should remove any backlinks to the object in the composition tree, so that object_delete will be able to drop the last reference and free the object. Use it for qdev buses. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-15qdev: Split up header so it can be used in cpu.hAnthony Liguori1-0/+1
Header file dependency is a frickin' nightmare right now. cpu.h tends to get included in our 'include everything' header files but qdev also needs to include those headers mainly for qdev-properties since it knows about CharDriverState and friends. We can solve this for now by splitting out qdev.h along the same lines that we previously split the C file. Then cpu.h just needs to include qdev-core.h. hw/qdev.h is split into following new headers: hw/qdev-core.h hw/qdev-properties.h hw/qdev-monitor.h Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> [ehabkost: re-add DEFINE_PROP_PCI_HOST_DEVADDR, that was removed on the original patch (by mistake, I guess)] [ehabkost: kill qdev_prop_set_vlan() declaration] [ehabkost: moved get_fw_dev_path() comment to the original location (I don't know why it was moved)] [ehabkost: removed qdev_exists() declaration] [ehabkost: keep using 'QemuOpts' instead of 'struct QemuOpts', as qdev-core.h includes qemu-option.h] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-10qdev: allow multiple qdev_init_gpio_in() callsPeter A. G. Crosthwaite1-3/+3
Allow multiple qdev_init_gpio_in() calls for the one device. The first call will define GPIOs 0-N-1, the next GPIOs N- ... . Allows different GPIOs to be handled with different handlers. Needed when two levels of the QOM class heirachy both define GPIO functionality, as a single GPIO handler with an index selecter is not possible. Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-10-06Merge branch 'trivial-patches' of git://github.com/stefanha/qemuAurelien Jarno1-1/+0
* 'trivial-patches' of git://github.com/stefanha/qemu: versatilepb: Use symbolic indices for ARM PIC qdev: kill bogus comment qemu-barrier: Fix compiler version check for future gcc versions hw: Add missing 'static' attribute for QEMUMachine cleanup useless return sentence qemu-sockets: Fix compiler warning (regression for MinGW) vnc: Fix spelling (hellmen -> hellman) in comment slirp: Fix spelling in comment (enought -> enough, insure -> ensure) tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code cpu: Add missing 'static' attribute to qemu_global_mutex configure: Support empty target list (--target-list=) hw: Fix return value check for bdrv_read, bdrv_write
2012-10-06vl.c: convert *vga_enabled functions to QOMAurelien Jarno1-5/+0
And get rid of qdev_exists(). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-05qdev: kill bogus commentEduardo Habkost1-1/+0
When the DeviceInfo code was removed, the comment describing qdev_subclass_init() was left in the code by mistake. Remove it. Cc: qemu-trivial@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05scsi, pci, qdev, isa-bus, sysbus: don't let *_get_fw_dev_path return NULLJim Meyering1-1/+1
Use g_strdup rather than strdup, because the sole caller (qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences it. Besides, in that caller, the allocated buffer is already freed with g_free, so it's better to allocate with a matching g_strdup. In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+ g_strdup combination with an equivalent g_strdup_printf use. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-23qom: object_delete should unparent the object firstPaolo Bonzini1-2/+0
object_deinit is only called when the reference count goes to zero, and yet tries to do an object_unparent. Now, object_unparent either does nothing or it will decrease the reference count. Because we know the reference count is zero, the object_unparent call in object_deinit is useless. Instead, we need to disconnect the object from its parent just before we remove the last reference apart from the parent's. This happens in object_delete. Once we do this, all calls to object_unparent peppered through QEMU can go away. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01net: Remove VLANStateStefan Hajnoczi1-2/+0
VLANState is no longer used and can be removed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-06-27qdev: fix use-after-free in the error path of qdev_init_nofailAnthony Liguori1-2/+3
From Markus: Before: $ qemu-system-x86_64 -display none -drive if=ide qemu-system-x86_64: Device needs media, but drive is empty qemu-system-x86_64: Initialization of device ide-hd failed [Exit 1 ] After: $ qemu-system-x86_64 -display none -drive if=ide qemu-system-x86_64: Device needs media, but drive is empty Segmentation fault (core dumped) [Exit 139 (SIGSEGV)] This error always existed as qdev_init() frees the object. But QOM goes a bit further and purposefully sets the class pointer to NULL to help find use-after-free. It worked :-) Cc: Andreas Faerber <afaerber@suse.de> Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-18Merge remote-tracking branch 'afaerber-or/qom-next-2' into stagingAnthony Liguori1-101/+199
* afaerber-or/qom-next-2: (22 commits) qom: Push error reporting to object_property_find() qdev: Remove qdev_prop_exists() qbus: Initialize in standard way qbus: Make child devices links qdev: Connect busses with their parent devices qdev: Convert busses to QEMU Object Model qdev: Move SysBus initialization to sysbus.c qdev: Use wrapper for qdev_get_path qdev: Remove qdev_prop_set_defaults qdev: Clean up global properties qdev: Move bus properties to abstract superclasses qdev: Move bus properties to a separate global qdev: Push "type" property up to Object arm_l2x0: Rename "type" property to "cache-type" m48t59: Rename "type" property to "model" qom: Assert that public types have a non-NULL parent field qom: Drop type_register_static_alias() macro qom: Make Object a type qom: Add class_base_init qom: Add object_child_foreach() ...
2012-06-18qom: Push error reporting to object_property_find()Paolo Bonzini1-1/+1
Avoids duplicated error_set(). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Also drop error_set() in object_property_del().] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Remove qdev_prop_exists()Paolo Bonzini1-1/+1
Can be replaced everywhere with object_property_find(). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qbus: Initialize in standard wayAnthony Liguori1-32/+48
Move code to an initfn and finalizer. Replace do_qbus_create_inplace() with qbus_realize(). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qbus: Make child devices linksAnthony Liguori1-11/+53
Make qbus children show up as link<> properties. There is no stable addressing for qbus children so we use an unstable naming convention. This is okay in QOM though because the composition name is expected to be what's stable. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Connect busses with their parent devicesAnthony Liguori1-0/+4
This makes SysBus part of the root hierarchy and all busses children of their respective parent DeviceState. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Convert busses to QEMU Object ModelAnthony Liguori1-20/+53
This is far less interesting than it sounds. We simply add an Object to each BusState and then register the types appropriately. Most of the interesting refactoring will follow in the next patches. Since we're changing fundamental type names (BusInfo -> BusClass), it all needs to convert at once. Fortunately, not a lot of code is affected. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Made all new bus TypeInfos static const.] [AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Move SysBus initialization to sysbus.cPaolo Bonzini1-24/+2
TYPE_SYSTEM_BUS will be local to hw/sysbus.c, so move existing references to main_system_bus and system_bus_info there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 09:40:39 +0000