summaryrefslogtreecommitdiff
path: root/config/Makefile.am
AgeCommit message (Collapse)AuthorFilesLines
2015-05-18config: remove 10-evdev.conf, let the evdev driver install that filePeter Hutterer1-2/+2
Now that we have two likely drivers that fight for control over the input devices (evdev and libinput) let's move the respective driver assignment to each package. So you get what you install. https://bugs.freedesktop.org/show_bug.cgi?id=89023 Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2014-02-17Get rid of config/non-seat0.conf.multi-seatLaércio de Sousa1-1/+1
This file is deprecated by commits c73c36b53 and 46cf2a6093. Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2014-02-13config: fails to create tarball as xorg-server.conf file removedGaetan Nadon1-1/+1
Just need to update EXTRA_DIST Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Gaetan Nadon <memsize@videotron.ca> Signed-off-by: Keith Packard <keithp@keithp.com>
2014-01-29dbus-core: Make dbus-core no longer mutually exclusive with udevHans de Goede1-8/+9
With systemd-logind the dbus-core will be used for more then just config, so it should be possible to build it even when using a non dbus dependent config backend. This patch also removes the config_ prefix from the dbus-core symbols. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2014-01-29config: drop the dbus APIPeter Hutterer1-7/+0
This API has been disabled by default since 1.4, the first release it came in. There a no known users of it and even its direct replacement (HAL) has been superseeded by udev on supported platforms since 1.8. This code is untested, probably hasn't been compiled in years and should not be shipped. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Stone <daniel@fooishbar.org>
2013-07-17config: provide example configuration for multi-seat setupsPeter Hutterer1-1/+1
Seats other than seat0 need custom configuration. Provide that with a default configuration file so we can share it across distros. This file intentionally does not end in .conf so it won't get picked up by the server after a normal installation. gdm, or whatever starts up the servers will have to explicitly specifiy this config file. This file replaces the one currently written by systemd's multi-seat-x binary: http://cgit.freedesktop.org/systemd/systemd/tree/src/login/multi-seat-x.c CC: Lennart Poettering <lennart@poettering.net> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
2013-06-06config: add a quirks file for devices needing special configurationPeter Hutterer1-2/+2
This is the fedora quirks file configuring the special handling some devices need. Rather than keeping this distro-specific add it to the tree so we can share these quirks. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Jamey Sharp <jamey@minilop.net>
2011-09-30Add a 'wscons' autoconf mechanism to configure input devices on BSD.Matthieu Herrb1-0/+6
This does not really handle hotplug (it's handled inside the kernel, by the 'mux' devices), but uses the wscons console driver configuration to figure out the keyboard layout and the list of pointing devices found by the kernel. Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr> Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-11-19XF86CONFIGDIR is undefined when built with --disable-xorg (#28672)Dan Horák1-0/+2
The 10-evdev.conf file gets installed as /usr/share/X11/10-evdev.conf on platforms that built the server with --disable-xorg like s390/s390x. The definition/installation should be guarded with "if XORG" because it makes sense only when built with xorg. X.Org Bug 28672 <http://bugs.freedesktop.org/show_bug.cgi?id=28672> Signed-off-by: Dan Horák <dan@danny.cz> Acked-by: Julien Cristau <jcristau@debian.org> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-06-11config: Script to convert HAL fdi settings to InputClass sectionsDan Nicholson1-1/+1
In the new world of udev and InputClass, x11_* settings from HAL fdi files will not be honored. This script converts those settings into valid InputClass sections that can be dropped into xorg.conf.d. Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-04-08Move 10-evdev.conf to system config dir $datadir/X11/xorg.conf.dDan Nicholson1-1/+1
Since the server searches in a vendor specific path now, we can install the evdev catchall there without disturbing local administration files. Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
2010-04-01Install 10-evdev.conf in $(prefix)/etc/X11/xorg.conf.d under udevKeith Packard1-1/+4
udev needs some xorg.conf file to tell it to load a suitable input driver, 10-evdev.conf is as simple as they come, mapping all evdev devices to the evdev driver. Signed-off-by: Keith Packard <keithp@keithp.com>
2009-12-30config: add libudev input-hotplug backendJulien Cristau1-3/+17
Add a backend using libudev for input hotplug, and disable the hal and dbus backends if this one is enabled. XKB configuration happens using xkb{rules,model,layout,variant,options} properties (case-insensitive) on the device. We fill in InputAttributes to allow configuration through InputClass in Xorg. Requires udev 148 for the input_id helper and ID_INPUT* properties. Signed-off-by: Julien Cristau <jcristau@debian.org> Acked-by: Dan Nicholson <dbn.lists@gmail.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2008-12-07Use libtool convenience libraries and better "symbol" table.Paulo Cesar Pereira de Andrade1-5/+5
All .a libraries were converted to .la, and instead of linking the Xorg binary with a mix of .a and .la, and adding some libraries more then once in the command line, etc, now it generates a single libxorg.la from all the required convenience libraries, and links with a dummy xorg.c (that should usually be the file with the main function...). This removes the requirement of some things like libosandcommon and libinit, that existed to circumvent problems when linking multiple .a and .la in the final Xorg binary. The "symbol table" is now generated dynamically, by a shell script, with an embedded gawk parser that parses cpp output. The new file sdksyms.sh is generated by hand by analyzing all Makefile.am's and making it create a sdksyms.c file, that includes all sdk headers that will add symbols for the Xorg binary. Module headers aren't read, and a in 2 files it was required to add a "<hash>ifndef XorgLoader" around declarations shared between the Xorg binary and libextmod. A few other changes were added to other sdk headers, like preventing multiple inclusion, or including other headers to satisfy dependencies. This should be a lot more portable, and better (hopefully properly) using libtool to generate convenience libraries.
2008-07-16config: Don't attempt to use D-Bus when not strictly necessaryDaniel Stone1-1/+1
If we have D-Bus but have explicitly disabled it, don't build it.
2007-08-01Build system: Add missing filesxorg-server-1.3.99.0Daniel Stone1-1/+1
A couple of headers weren't added to the build.
2007-08-01Config: Fix merge detritusDaniel Stone1-1/+0
2007-08-01Hotplug: Add HAL supportDaniel Stone1-1/+5
Add support for HAL-based hotplugging, in which we just get the list of input devices and properties from HAL. Requires an FDI which is not yet in mainline HAL.
2007-08-01Hotplug: Separate D-Bus into core and hotplug API componentsDaniel Stone1-2/+11
Break up D-Bus into two components: a D-Bus core that can be used by any part of the server (for the moment, just the D-Bus hotplug API, and the forthcoming HAL hotplug API), and the old D-Bus hotplug API.
2007-07-26libconfig shouldn't be an installed library.Adam Jackson1-1/+1
2006-07-21add basic D-BUS configuration mechanismDaniel Stone1-0/+10
Also move LookupDeviceIntRec into the DIX, and add InputOption type, and NewInputDeviceRequest prototype (DIX requests DDX to add a device). Does not link without an implemented NIDR.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 12:21:51 +0000