Remove the duplicate copy of xf86cvt.c

4 files changed, 5 insertions, 298 deletions

diff --git a/hw/xfree86/common/Makefile.am b/hw/xfree86/common/Makefile.am
index 4f0a2d6b3..0f44075ba 100644
--- a/hw/xfree86/common/Makefile.am
+++ b/hw/xfree86/common/Makefile.am
@@ -30,7 +30,7 @@ BUILT_SOURCES = xf86DefModeSet.c
 
 AM_LDFLAGS = -r
 libcommon_la_SOURCES = xf86Configure.c xf86Bus.c xf86Config.c \
-                      xf86Cursor.c xf86cvt.c xf86DGA.c xf86DPMS.c \
+                      xf86Cursor.c xf86DGA.c xf86DPMS.c \
                       xf86DoProbe.c xf86Events.c \
                       xf86Globals.c xf86AutoConfig.c \
                       xf86MiscExt.c xf86Option.c \
diff --git a/hw/xfree86/common/xf86cvt.c b/hw/xfree86/common/xf86cvt.c
deleted file mode 100644
index f8185a38c..000000000
--- a/hw/xfree86/common/xf86cvt.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright 2005-2006 Luc Verhaegen.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The reason for having this function in a file of its own is
- * so that ../utils/cvt/cvt can link to it, and that xf86CVTMode
- * code is shared directly.
- */
-
-#include "xf86.h"
-
-/*
- * Generate a CVT standard mode from HDisplay, VDisplay and VRefresh.
- *
- * These calculations are stolen from the CVT calculation spreadsheet written
- * by Graham Loveridge. He seems to be claiming no copyright and there seems to
- * be no license attached to this. He apparently just wants to see his name
- * mentioned.
- *
- * This file can be found at http://www.vesa.org/Public/CVT/CVTd6r1.xls
- *
- * Comments and structure corresponds to the comments and structure of the xls.
- * This should ease importing of future changes to the standard (not very
- * likely though).
- *
- * About margins; i'm sure that they are to be the bit between HDisplay and
- * HBlankStart, HBlankEnd and HTotal, VDisplay and VBlankStart, VBlankEnd and 
- * VTotal, where the overscan colour is shown. FB seems to call _all_ blanking
- * outside sync "margin" for some reason. Since we prefer seeing proper
- * blanking instead of the overscan colour, and since the Crtc* values will
- * probably get altered after us, we will disable margins altogether. With
- * these calculations, Margins will plainly expand H/VDisplay, and we don't
- * want that. -- libv
- *
- */
-_X_EXPORT DisplayModePtr
-xf86CVTMode(int HDisplay, int VDisplay, float VRefresh, Bool Reduced,
-            Bool Interlaced)
-{
-    DisplayModeRec  *Mode = xnfcalloc(1, sizeof(DisplayModeRec));
-
-    /* 1) top/bottom margin size (% of height) - default: 1.8 */
-#define CVT_MARGIN_PERCENTAGE 1.8    
-
-    /* 2) character cell horizontal granularity (pixels) - default 8 */
-#define CVT_H_GRANULARITY 8
-
-    /* 4) Minimum vertical porch (lines) - default 3 */
-#define CVT_MIN_V_PORCH 3
-
-    /* 4) Minimum number of vertical back porch lines - default 6 */
-#define CVT_MIN_V_BPORCH 6
-
-    /* Pixel Clock step (kHz) */
-#define CVT_CLOCK_STEP 250
-
-    Bool Margins = FALSE;
-    float  VFieldRate, HPeriod;
-    int  HDisplayRnd, HMargin;
-    int  VDisplayRnd, VMargin, VSync;
-    float  Interlace; /* Please rename this */
-
-    /* CVT default is 60.0Hz */
-    if (!VRefresh)
-        VRefresh = 60.0;
-
-    /* 1. Required field rate */
-    if (Interlaced)
-        VFieldRate = VRefresh * 2;
-    else
-        VFieldRate = VRefresh;
-
-    /* 2. Horizontal pixels */
-    HDisplayRnd = HDisplay - (HDisplay % CVT_H_GRANULARITY);
-
-    /* 3. Determine left and right borders */
-    if (Margins) {
-        /* right margin is actually exactly the same as left */
-        HMargin = (((float) HDisplayRnd) * CVT_MARGIN_PERCENTAGE / 100.0);
-        HMargin -= HMargin % CVT_H_GRANULARITY;
-    } else
-        HMargin = 0;
-
-    /* 4. Find total active pixels */
-    Mode->HDisplay = HDisplayRnd + 2*HMargin;
-
-    /* 5. Find number of lines per field */
-    if (Interlaced)
-        VDisplayRnd = VDisplay / 2;
-    else
-        VDisplayRnd = VDisplay;
-
-    /* 6. Find top and bottom margins */
-    /* nope. */
-    if (Margins)
-        /* top and bottom margins are equal again. */
-        VMargin = (((float) VDisplayRnd) * CVT_MARGIN_PERCENTAGE / 100.0);
-    else
-        VMargin = 0;
-
-    Mode->VDisplay = VDisplay + 2*VMargin;
-
-    /* 7. Interlace */
-    if (Interlaced)
-        Interlace = 0.5;
-    else
-        Interlace = 0.0;
-
-    /* Determine VSync Width from aspect ratio */
-    if (!(VDisplay % 3) && ((VDisplay * 4 / 3) == HDisplay))
-        VSync = 4;
-    else if (!(VDisplay % 9) && ((VDisplay * 16 / 9) == HDisplay))
-        VSync = 5;
-    else if (!(VDisplay % 10) && ((VDisplay * 16 / 10) == HDisplay))
-        VSync = 6;
-    else if (!(VDisplay % 4) && ((VDisplay * 5 / 4) == HDisplay))
-        VSync = 7;
-    else if (!(VDisplay % 9) && ((VDisplay * 15 / 9) == HDisplay))
-        VSync = 7;
-    else /* Custom */
-        VSync = 10;
-
-    if (!Reduced) { /* simplified GTF calculation */
-
-        /* 4) Minimum time of vertical sync + back porch interval (µs) 
-         * default 550.0 */
-#define CVT_MIN_VSYNC_BP 550.0
-
-        /* 3) Nominal HSync width (% of line period) - default 8 */
-#define CVT_HSYNC_PERCENTAGE 8
-
-        float  HBlankPercentage;
-        int  VSyncAndBackPorch, VBackPorch;
-        int  HBlank;
-
-        /* 8. Estimated Horizontal period */
-        HPeriod = ((float) (1000000.0 / VFieldRate - CVT_MIN_VSYNC_BP)) / 
-            (VDisplayRnd + 2 * VMargin + CVT_MIN_V_PORCH + Interlace);
-
-        /* 9. Find number of lines in sync + backporch */
-        if (((int)(CVT_MIN_VSYNC_BP / HPeriod) + 1) < (VSync + CVT_MIN_V_PORCH))
-            VSyncAndBackPorch = VSync + CVT_MIN_V_PORCH;
-        else
-            VSyncAndBackPorch = (int)(CVT_MIN_VSYNC_BP / HPeriod) + 1;
-
-        /* 10. Find number of lines in back porch */
-        VBackPorch = VSyncAndBackPorch - VSync;
-
-        /* 11. Find total number of lines in vertical field */
-        Mode->VTotal = VDisplayRnd + 2 * VMargin + VSyncAndBackPorch + Interlace
-            + CVT_MIN_V_PORCH;
-
-        /* 5) Definition of Horizontal blanking time limitation */
-        /* Gradient (%/kHz) - default 600 */
-#define CVT_M_FACTOR 600
-
-        /* Offset (%) - default 40 */
-#define CVT_C_FACTOR 40
-
-        /* Blanking time scaling factor - default 128 */
-#define CVT_K_FACTOR 128
-
-        /* Scaling factor weighting - default 20 */
-#define CVT_J_FACTOR 20
-
-#define CVT_M_PRIME CVT_M_FACTOR * CVT_K_FACTOR / 256
-#define CVT_C_PRIME (CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \
-        CVT_J_FACTOR
-
-        /* 12. Find ideal blanking duty cycle from formula */
-        HBlankPercentage = CVT_C_PRIME - CVT_M_PRIME * HPeriod/1000.0;
-
-        /* 13. Blanking time */
-        if (HBlankPercentage < 20)
-            HBlankPercentage = 20;
-
-        HBlank = Mode->HDisplay * HBlankPercentage/(100.0 - HBlankPercentage);
-        HBlank -= HBlank % (2*CVT_H_GRANULARITY);
-        
-        /* 14. Find total number of pixels in a line. */
-        Mode->HTotal = Mode->HDisplay + HBlank;
-
-        /* Fill in HSync values */
-        Mode->HSyncEnd = Mode->HDisplay + HBlank / 2;
-
-        Mode->HSyncStart = Mode->HSyncEnd - 
-            (Mode->HTotal * CVT_HSYNC_PERCENTAGE) / 100;
-        Mode->HSyncStart += CVT_H_GRANULARITY - 
-            Mode->HSyncStart % CVT_H_GRANULARITY;
-
-        /* Fill in VSync values */
-        Mode->VSyncStart = Mode->VDisplay + CVT_MIN_V_PORCH;
-        Mode->VSyncEnd = Mode->VSyncStart + VSync;
-
-    } else { /* Reduced blanking */
-        /* Minimum vertical blanking interval time (µs) - default 460 */
-#define CVT_RB_MIN_VBLANK 460.0
-
-        /* Fixed number of clocks for horizontal sync */
-#define CVT_RB_H_SYNC 32.0
-
-        /* Fixed number of clocks for horizontal blanking */
-#define CVT_RB_H_BLANK 160.0
-
-        /* Fixed number of lines for vertical front porch - default 3 */
-#define CVT_RB_VFPORCH 3
-
-        int  VBILines;
-
-        /* 8. Estimate Horizontal period. */
-        HPeriod = ((float) (1000000.0 / VFieldRate - CVT_RB_MIN_VBLANK)) / 
-            (VDisplayRnd + 2*VMargin);
-
-        /* 9. Find number of lines in vertical blanking */
-        VBILines = ((float) CVT_RB_MIN_VBLANK) / HPeriod + 1;
-
-        /* 10. Check if vertical blanking is sufficient */
-        if (VBILines < (CVT_RB_VFPORCH + VSync + CVT_MIN_V_BPORCH))
-            VBILines = CVT_RB_VFPORCH + VSync + CVT_MIN_V_BPORCH;
-        
-        /* 11. Find total number of lines in vertical field */
-        Mode->VTotal = VDisplayRnd + 2 * VMargin + Interlace + VBILines;
-
-        /* 12. Find total number of pixels in a line */
-        Mode->HTotal = Mode->HDisplay + CVT_RB_H_BLANK;
-
-        /* Fill in HSync values */
-        Mode->HSyncEnd = Mode->HDisplay + CVT_RB_H_BLANK / 2;
-        Mode->HSyncStart = Mode->HSyncEnd - CVT_RB_H_SYNC;
-
-        /* Fill in VSync values */
-        Mode->VSyncStart = Mode->VDisplay + CVT_RB_VFPORCH;
-        Mode->VSyncEnd = Mode->VSyncStart + VSync;
-    }
-
-    /* 15/13. Find pixel clock frequency (kHz for xf86) */
-    Mode->Clock = Mode->HTotal * 1000.0 / HPeriod;
-    Mode->Clock -= Mode->Clock % CVT_CLOCK_STEP;
-
-    /* 16/14. Find actual Horizontal Frequency (kHz) */
-    Mode->HSync = ((float) Mode->Clock) / ((float) Mode->HTotal);
-
-    /* 17/15. Find actual Field rate */
-    Mode->VRefresh = (1000.0 * ((float) Mode->Clock)) / 
-        ((float) (Mode->HTotal * Mode->VTotal));
-
-    /* 18/16. Find actual vertical frame frequency */
-    /* ignore - just set the mode flag for interlaced */
-    if (Interlaced)
-        Mode->VTotal *= 2;
-
-    {
-        char  Name[256];
-        Name[0] = 0;
-
-        snprintf(Name, 256, "%dx%d", HDisplay, VDisplay);
-
-        Mode->name = xnfalloc(strlen(Name) + 1);
-        memcpy(Mode->name, Name, strlen(Name) + 1);
-    }
-
-    if (Reduced)
-        Mode->Flags |= V_PHSYNC | V_NVSYNC;
-    else
-        Mode->Flags |= V_NHSYNC | V_PVSYNC;
-
-    if (Interlaced)
-        Mode->Flags |= V_INTERLACE;
-
-    return Mode;
-}
diff --git a/hw/xfree86/modes/xf86cvt.c b/hw/xfree86/modes/xf86cvt.c
index 68a94627c..e9c74aa62 100644
--- a/hw/xfree86/modes/xf86cvt.c
+++ b/hw/xfree86/modes/xf86cvt.c
@@ -20,11 +20,6 @@
  * OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/**
- * @file This is a copy of xf86cvt.c from the X Server, for compatibility with
- * old servers (pre-1.2).
- */
-
 /*
  * The reason for having this function in a file of its own is
  * so that ../utils/cvt/cvt can link to it, and that xf86CVTMode
diff --git a/hw/xfree86/utils/cvt/Makefile.am b/hw/xfree86/utils/cvt/Makefile.am
index 365c6cb88..4db175fbd 100644
--- a/hw/xfree86/utils/cvt/Makefile.am
+++ b/hw/xfree86/utils/cvt/Makefile.am
@@ -28,11 +28,13 @@
 
 bin_PROGRAMS = cvt
 
-INCLUDES = $(XORG_INCS)
+INCLUDES = $(XORG_INCS) \
+	   -I$(top_srcdir)/hw/xfree86/ddc \
+	   -I$(top_srcdir)/hw/xfree86/parser
 DUMMYLIB_SRCDIR = $(XFREE86_SRCDIR)/dummylib
 
 # gah
-cvt_SOURCES = cvt.c $(top_srcdir)/hw/xfree86/common/xf86cvt.c
+cvt_SOURCES = cvt.c $(top_srcdir)/hw/xfree86/modes/xf86cvt.c
 cvt_CFLAGS = $(DIX_CFLAGS) $(XORG_CFLAGS)
 cvt_LDADD = $(top_builddir)/hw/xfree86/dummylib/libdummy-nonserver.a