/* $XFree86: xc/programs/Xserver/hw/xfree86/xaa/xaaLine.c,v 1.6 2002/09/18 18:15:00 martin Exp $ */

#include "X.h"
#include "misc.h"
#include "xf86.h"
#include "xf86_ansic.h"
#include "xf86_OSproc.h"

#include "scrnintstr.h"
#include "pixmapstr.h"
#include "miline.h"
#include "xf86str.h"
#include "xaa.h"
#include "xaalocal.h"


void
#ifdef POLYSEGMENT
XAAPolySegment(
    DrawablePtr	pDrawable,
    GCPtr	pGC,
    int		nseg,
    xSegment	*pSeg
#else
XAAPolyLines(
    DrawablePtr pDrawable,
    GCPtr	pGC,
    int		mode,		/* Origin or Previous */
    int		npt,		/* number of points */
    DDXPointPtr pptInit
#endif
){
    XAAInfoRecPtr infoRec = GET_XAAINFORECPTR_FROM_GC(pGC);
    BoxPtr pboxInit = REGION_RECTS(pGC->pCompositeClip);
    int nboxInit = REGION_NUM_RECTS(pGC->pCompositeClip);
    unsigned int bias = miGetZeroLineBias(pDrawable->pScreen);
    int xorg = pDrawable->x;
    int yorg = pDrawable->y;
    int nbox;
    BoxPtr pbox;
#ifndef POLYSEGMENT
    DDXPointPtr ppt;
#endif
    int x1, x2, y1, y2, tmp, len;

    if(!nboxInit)
	return;

    if (infoRec->SolidLineFlags & LINE_LIMIT_COORDS) {
	int minValX = infoRec->SolidLineLimits.x1;
	int maxValX = infoRec->SolidLineLimits.x2;
	int minValY = infoRec->SolidLineLimits.y1;
	int maxValY = infoRec->SolidLineLimits.y2;
#ifdef POLYSEGMENT
	int n = nseg;
	xSegment *s = pSeg;

	while (n--)
#else
	int n = npt;
	int xorgtmp = xorg;
	int yorgtmp = yorg;

	ppt = pptInit;
	x2 = ppt->x + xorgtmp;
	y2 = ppt->y + yorgtmp;
	while (--n)
#endif
	{
#ifdef POLYSEGMENT
	    x1 = s->x1 + xorg;
	    y1 = s->y1 + yorg;
	    x2 = s->x2 + xorg;
	    y2 = s->y2 + yorg;
	    s++;
#else
	    x1 = x2;
	    y1 = y2;
	    ++ppt;
	    if (mode == CoordModePrevious) {
		xorgtmp = x1;
		yorgtmp = y1;
	    }
	    x2 = ppt->x + xorgtmp;
	    y2 = ppt->y + yorgtmp;
#endif
	    if (x1 > maxValX || x1 < minValX ||
		x2 > maxValX || x2 < minValX ||
		y1 > maxValY || y1 < minValY ||
		y2 > maxValY || y2 < minValY) {
#ifdef POLYSEGMENT
		XAAFallbackOps.PolySegment(pDrawable, pGC, nseg, pSeg);
#else
		XAAFallbackOps.Polylines(pDrawable, pGC, mode, npt, pptInit);
#endif
		return;
	    }
	}
    }

    (*infoRec->SetupForSolidLine)(infoRec->pScrn, pGC->fgPixel,
					pGC->alu, pGC->planemask);

#ifdef POLYSEGMENT
    while (nseg--)
#else
    ppt = pptInit;
    x2 = ppt->x + xorg;
    y2 = ppt->y + yorg;
    while(--npt)
#endif
    {
	nbox = nboxInit;
	pbox = pboxInit;

#ifdef POLYSEGMENT
	x1 = pSeg->x1 + xorg;	
	y1 = pSeg->y1 + yorg;
	x2 = pSeg->x2 + xorg;	
	y2 = pSeg->y2 + yorg;
	pSeg++;
#else
	x1 = x2; 
	y1 = y2;
	++ppt;
	if (mode == CoordModePrevious) {
	    xorg = x1; 
	    yorg = y1;
	}
	x2 = ppt->x + xorg; 
	y2 = ppt->y + yorg;
#endif

	if (x1 == x2) { /* vertical line */
	    /* make the line go top to bottom of screen, keeping
	       endpoint semantics
	    */
	    if (y1 > y2) {
		tmp = y2; 
		y2 = y1 + 1; 
		y1 = tmp + 1;
#ifdef POLYSEGMENT
		if (pGC->capStyle != CapNotLast) y1--;
#endif
	    }
#ifdef POLYSEGMENT
	    else if (pGC->capStyle != CapNotLast) y2++;
#endif
	    /* get to first band that might contain part of line */
	    while(nbox && (pbox->y2 <= y1)) {
		pbox++;
		nbox--;
	    }

	   /* stop when lower edge of box is beyond end of line */
	    while(nbox && (y2 >= pbox->y1)) {
		if ((x1 >= pbox->x1) && (x1 < pbox->x2)) {
		    tmp = max(y1, pbox->y1);
		    len = min(y2, pbox->y2) - tmp;
		    if (len) (*infoRec->SubsequentSolidHorVertLine)(
				infoRec->pScrn, x1, tmp, len, DEGREES_270);
		}
		nbox--;
		pbox++;
	    }
#ifndef POLYSEGMENT
	    y2 = ppt->y + yorg;
#endif
	} else if (y1 == y2) { /* horizontal line */
	/* force line from left to right, keeping endpoint semantics */
	    if (x1 > x2) {
		tmp = x2; 
		x2 = x1 + 1; 
		x1 = tmp + 1;
#ifdef POLYSEGMENT
		if (pGC->capStyle != CapNotLast)  x1--;
#endif
	    }
#ifdef POLYSEGMENT
	    else if (pGC->capStyle != CapNotLast) x2++;
#endif

	    /* find the correct band */
	    while(nbox && (pbox->y2 <= y1)) {
		pbox++;
		nbox--;
	    }

	    /* try to draw the line, if we haven't gone beyond it */
	    if (nbox && (pbox->y1 <= y1)) {
		int orig_y = pbox->y1;
		/* when we leave this band, we're done */
		while(nbox && (orig_y == pbox->y1)) {
		    if (pbox->x2 <= x1) {
			/* skip boxes until one might contain start point */
			nbox--;
			pbox++;
			continue;
		    }

		    /* stop if left of box is beyond right of line */
		    if (pbox->x1 >= x2) {
			nbox = 0;
			break;
		    }

		    tmp = max(x1, pbox->x1);
		    len = min(x2, pbox->x2) - tmp;
		    if (len) (*infoRec->SubsequentSolidHorVertLine)(
				infoRec->pScrn, tmp, y1, len, DEGREES_0);
		    nbox--;
		    pbox++;
		}
	    }
#ifndef POLYSEGMENT
	    x2 = ppt->x + xorg;
#endif
	} else{ /* sloped line */
	    unsigned int oc1, oc2;
	    int dmin, dmaj, e, octant;

	    if (infoRec->SubsequentSolidBresenhamLine) {
	        if((dmaj = x2 - x1) < 0) {
		   dmaj = -dmaj;
		   octant = XDECREASING;
		} else octant = 0;		   

	        if((dmin = y2 - y1) < 0) {
		   dmin = -dmin;
		   octant |= YDECREASING;
		}	
	
		if(dmin >= dmaj){
		    tmp = dmin; dmin = dmaj; dmaj = tmp;
		    octant |= YMAJOR;
		}

		e = -dmaj - ((bias >> octant) & 1);
		len = dmaj;
		dmin <<= 1;
		dmaj <<= 1;
	    } else {	/* Muffle compiler */
		dmin = dmaj = e = octant = len = 0;
	    }

	    while(nbox--) {
		oc1 = oc2 = 0;
		OUTCODES(oc1, x1, y1, pbox);
		OUTCODES(oc2, x2, y2, pbox);
		if (!(oc1 | oc2)) {   /* unclipped */
		    if(infoRec->SubsequentSolidTwoPointLine) {
			(*infoRec->SubsequentSolidTwoPointLine)(
				infoRec->pScrn, x1, y1, x2, y2, 
#ifdef POLYSEGMENT
			    	(pGC->capStyle != CapNotLast) ? 0 :
#endif
				OMIT_LAST
			);
		    } else {
			(*infoRec->SubsequentSolidBresenhamLine)(
				infoRec->pScrn, x1, y1, dmaj, dmin, e, 
#ifdef POLYSEGMENT
			    	(pGC->capStyle != CapNotLast) ? (len+1) :
#endif
			    	len, octant);
		    }
		    break;
		} else if (oc1 & oc2) { /* completely clipped */
		    pbox++;
		} else if (infoRec->ClippingFlags & HARDWARE_CLIP_SOLID_LINE) {
		    (*infoRec->SetClippingRectangle)(infoRec->pScrn,
			pbox->x1, pbox->y1, pbox->x2 - 1, pbox->y2 - 1);

		    if(infoRec->SubsequentSolidBresenhamLine) {
			(*infoRec->SubsequentSolidBresenhamLine)(
				infoRec->pScrn, x1, y1, dmaj, dmin, e, 
#ifdef POLYSEGMENT
			    	(pGC->capStyle != CapNotLast) ? (len+1) :
#endif
			    	len, octant);
		    } else {
			(*infoRec->SubsequentSolidTwoPointLine)(
				infoRec->pScrn, x1, y1, x2, y2, 
#ifdef POLYSEGMENT
			    	(pGC->capStyle != CapNotLast) ? 0 :
#endif
				OMIT_LAST
			);
		    }
		    (*infoRec->DisableClipping)(infoRec->pScrn);
		    pbox++;
		} else {
		    int new_x1 = x1, new_y1 = y1, new_x2 = x2, new_y2 = y2;
		    int clip1 = 0, clip2 = 0;
		    int err, adx, ady;
		    
		    if(octant & YMAJOR) {
			ady = dmaj >> 1;
			adx = dmin >> 1;
		    } else {
			ady = dmin >> 1;
			adx = dmaj >> 1;
		    }

		    if (miZeroClipLine(pbox->x1, pbox->y1, 
				       pbox->x2 - 1, pbox->y2 - 1,
				       &new_x1, &new_y1, &new_x2, &new_y2,
				       adx, ady, &clip1, &clip2,
				       octant, bias, oc1, oc2) == -1)
		    {
			pbox++;
			continue;
		    }

		    if (octant & YMAJOR)
			len = abs(new_y2 - new_y1);
		    else
			len = abs(new_x2 - new_x1);
#ifdef POLYSEGMENT
		    if (clip2 != 0 || pGC->capStyle != CapNotLast)
			len++;
#else
		    len += (clip2 != 0);
#endif
		    if (len) {
		    	int abserr, clipdx, clipdy;
			/* unwind bresenham error term to first point */
			if (clip1) {
			    clipdx = abs(new_x1 - x1);
			    clipdy = abs(new_y1 - y1);

			    if (octant & YMAJOR)
				err = e + clipdy*dmin - clipdx*dmaj;
			    else
				err = e + clipdx*dmin - clipdy*dmaj;
			} else
			    err = e;

#define range infoRec->SolidBresenhamLineErrorTermBits
			abserr = abs(err);			    
			while((abserr & range) || 
			      (dmaj & range) ||
			      (dmin & range)) {
				dmin >>= 1;
				dmaj >>= 1;
				abserr >>= 1;
				err /= 2;
			}

			(*infoRec->SubsequentSolidBresenhamLine)(
				infoRec->pScrn, new_x1, new_y1,
				dmaj, dmin, err, len, octant);
		    }
		    pbox++;
		}
	    } /* while (nbox--) */
	} /* sloped line */
    } /* while (nline--) */

#ifndef POLYSEGMENT
    /* paint the last point if the end style isn't CapNotLast.
       (Assume that a projecting, butt, or round cap that is one
        pixel wide is the same as the single pixel of the endpoint.)
    */

    if ((pGC->capStyle != CapNotLast) &&
	((ppt->x + xorg != pptInit->x + pDrawable->x) ||
	 (ppt->y + yorg != pptInit->y + pDrawable->y) ||
	 (ppt == pptInit + 1)))
    {
	nbox = nboxInit;
	pbox = pboxInit;
	while (nbox--)
	{
	    if ((x2 >= pbox->x1) && (y2 >= pbox->y1) &&
		(x2 <  pbox->x2) && (y2 <  pbox->y2))
	    {
		(*infoRec->SubsequentSolidHorVertLine)(
			infoRec->pScrn, x2, y2, 1, DEGREES_0);
		break;
	    }
	    else
		pbox++;
	}
    }
#endif

    SET_SYNC_FLAG(infoRec);
}