From b78412b8300a8453b78d2c1b0b925b66493bb011 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 3 Oct 2017 16:14:34 -0700 Subject: sh: sh7722: remove nonexistent GPIO_PTQ7 to fix pinctrl registration Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration", v2. Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. Apparently GPIO_PTQ7 was defined in the enum, but never used. If enum values are defined, but never used, pinmux_pins[] contains (zero-filled) holes. Hence such entries are treated as pin zero, which was registered before, and pinctrl registration fails. I can't see how this ever worked, as at the time of commit f5e25ae52fef ("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and drivers/pinctrl/core.c already had the check. Some scripting revealed a few more broken drivers: - sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV. - sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with PINMUX_GPIO(). Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should fix the issue on the other 3 SoCs, but was untested due to lack of hardware. This patch (of 4): On sh7722/Migo-R, pinctrl registration fails with: sh-pfc pfc-sh7722: pin 0 already registered sh-pfc pfc-sh7722: error during pin registration sh-pfc pfc-sh7722: could not register: -22 sh-pfc: probe of pfc-sh7722 failed with error -22 pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is defined in the enum, but never used, pinmux_pins[] contains a (zero-filled) hole. Hence this entry is treated as pin zero, which was registered before, and pinctrl registration fails. According to the datasheet, port PTQ7 does not exist. Hence remove GPIO_PTQ7 from the enum to fix this. Link: http://lkml.kernel.org/r/1505205657-18012-2-git-send-email-geert+renesas@glider.be Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code") Signed-off-by: Geert Uytterhoeven Reported-by: Magnus Damm Reviewed-by: Laurent Pinchart Tested-by: Jacopo Mondi Cc: Rich Felker Cc: Yoshihiro Shimoda Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/sh/include/cpu-sh4/cpu/sh7722.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/sh') diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 3bb74e534d0f..78961ab78a5a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -67,7 +67,7 @@ enum { GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0, /* PTQ */ - GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4, + GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4, GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0, /* PTR */ -- cgit v1.2.3