summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-01-28openvswitch: Add support for checksums on UDP tunnels.Jesse Gross3-6/+9
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28Merge tag 'nfc-next-3.20-1' of ↵David S. Miller5-59/+84
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller25-121/+189
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28NFC: hci: Remove nfc_hci_pipe2gate functionChristophe Ricard2-13/+0
With the newly introduced pipes table hci_dev fields, the nfc_hci_pipe2gate routine is no longer needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Add cmd_received handlerChristophe Ricard1-0/+3
When a command is received, it is sometime needed to let the CLF driver do some additional operations. (ex: count remaining pipe notification...) Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Reference every pipe information according to notificationChristophe Ricard2-22/+44
We update the tracked pipes status when receiving HCI commands. Also we forward HCI errors and we reply to any HCI command, even though we don't support it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change nfc_hci_send_response gate parameter to pipeChristophe Ricard2-21/+8
As there can be several pipes connected to the same gate, we need to know which pipe ID to use when sending an HCI response. A gate ID is not enough. Instead of changing the nfc_hci_send_response() API to something not aligned with the rest of the HCI API, we call nfc_hci_hcp_message_tx directly. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Add pipes table to reference them with a tuple {gate, host}Christophe Ricard2-7/+35
In order to keep host source information on specific hci event (such as evt_connectivity or evt_transaction) and because 2 pipes can be connected to the same gate, it is necessary to add a table referencing every pipe with a {gate, host} tuple. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change event_received handler gate parameter to pipeChristophe Ricard1-1/+1
Several pipes may point to the same CLF gate, so getting the gate ID as an input is not enough. For example dual secure element may have 2 pipes (1 for uicc and 1 for eSE) pointing to the connectivity gate. As resolving gate and host IDs can be done from a pipe, we now pass the pipe ID to the event received handler. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27net: don't OOPS on socket aioChristoph Hellwig1-3/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27netlink: Kill redundant net argument in netlink_insertHerbert Xu1-8/+7
The socket already carries the net namespace with it so there is no need to be passing another net around. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge branch 'master' of ↵David S. Miller1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2015-01-26 Just two small fixes for _decode_session6() where we might decode to wrong header information in some rare situations. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos tooHannes Frederic Sowa1-19/+26
Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba2de3957 ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27ping: Fix race in free in receive pathsubashab@codeaurora.org1-1/+4
An exception is seen in ICMP ping receive path where the skb destructor sock_rfree() tries to access a freed socket. This happens because ping_rcv() releases socket reference with sock_put() and this internally frees up the socket. Later icmp_rcv() will try to free the skb and as part of this, skb destructor is called and which leads to a kernel panic as the socket is freed already in ping_rcv(). -->|exception -007|sk_mem_uncharge -007|sock_rfree -008|skb_release_head_state -009|skb_release_all -009|__kfree_skb -010|kfree_skb -011|icmp_rcv -012|ip_local_deliver_finish Fix this incorrect free by cloning this skb and processing this cloned skb instead. This patch was suggested by Eric Dumazet Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27udp_diag: Fix socket skipping within chainHerbert Xu1-1/+3
While working on rhashtable walking I noticed that the UDP diag dumping code is buggy. In particular, the socket skipping within a chain never happens, even though we record the number of sockets that should be skipped. As this code was supposedly copied from TCP, this patch does what TCP does and resets num before we walk a chain. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26Merge tag 'mac80211-for-davem-2015-01-23' of ↵David S. Miller4-20/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Another set of last-minute fixes: * fix station double-removal when suspending while associating * fix the HT (802.11n) header length calculation * fix the CCK radiotap flag used for monitoring, a pretty old regression but a simple one-liner * fix per-station group-key handling Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26ipv4: try to cache dst_entries which would cause a redirectHannes Frederic Sowa2-5/+7
Not caching dst_entries which cause redirects could be exploited by hosts on the same subnet, causing a severe DoS attack. This effect aggravated since commit f88649721268999 ("ipv4: fix dst race in sk_dst_get()"). Lookups causing redirects will be allocated with DST_NOCACHE set which will force dst_release to free them via RCU. Unfortunately waiting for RCU grace period just takes too long, we can end up with >1M dst_entries waiting to be released and the system will run OOM. rcuos threads cannot catch up under high softirq load. Attaching the flag to emit a redirect later on to the specific skb allows us to cache those dst_entries thus reducing the pressure on allocation and deallocation. This issue was discovered by Marcelo Leitner. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Marcelo Leitner <mleitner@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: sctp: fix slab corruption from use after free on INIT collisionsDaniel Borkmann1-1/+0
When hitting an INIT collision case during the 4WHS with AUTH enabled, as already described in detail in commit 1be9a950c646 ("net: sctp: inherit auth_capable on INIT collisions"), it can happen that we occasionally still remotely trigger the following panic on server side which seems to have been uncovered after the fix from commit 1be9a950c646 ... [ 533.876389] BUG: unable to handle kernel paging request at 00000000ffffffff [ 533.913657] IP: [<ffffffff811ac385>] __kmalloc+0x95/0x230 [ 533.940559] PGD 5030f2067 PUD 0 [ 533.957104] Oops: 0000 [#1] SMP [ 533.974283] Modules linked in: sctp mlx4_en [...] [ 534.939704] Call Trace: [ 534.951833] [<ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0 [ 534.984213] [<ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0 [ 535.015025] [<ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170 [ 535.045661] [<ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0 [ 535.074593] [<ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50 [ 535.105239] [<ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp] [ 535.138606] [<ffffffff814e43bd>] SyS_listen+0x9d/0xb0 [ 535.166848] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b ... or depending on the the application, for example this one: [ 1370.026490] BUG: unable to handle kernel paging request at 00000000ffffffff [ 1370.026506] IP: [<ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0 [ 1370.054568] PGD 633c94067 PUD 0 [ 1370.070446] Oops: 0000 [#1] SMP [ 1370.085010] Modules linked in: sctp kvm_amd kvm [...] [ 1370.963431] Call Trace: [ 1370.974632] [<ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960 [ 1371.000863] [<ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960 [ 1371.027154] [<ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170 [ 1371.054679] [<ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130 [ 1371.080183] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b With slab debugging enabled, we can see that the poison has been overwritten: [ 669.826368] BUG kmalloc-128 (Tainted: G W ): Poison overwritten [ 669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b [ 669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494 [ 669.826424] __slab_alloc+0x4bf/0x566 [ 669.826433] __kmalloc+0x280/0x310 [ 669.826453] sctp_auth_create_key+0x23/0x50 [sctp] [ 669.826471] sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp] [ 669.826488] sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp] [ 669.826505] sctp_do_sm+0x29d/0x17c0 [sctp] [...] [ 669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494 [ 669.826635] __slab_free+0x39/0x2a8 [ 669.826643] kfree+0x1d6/0x230 [ 669.826650] kzfree+0x31/0x40 [ 669.826666] sctp_auth_key_put+0x19/0x20 [sctp] [ 669.826681] sctp_assoc_update+0x1ee/0x2d0 [sctp] [ 669.826695] sctp_do_sm+0x674/0x17c0 [sctp] Since this only triggers in some collision-cases with AUTH, the problem at heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice when having refcnt 1, once directly in sctp_assoc_update() and yet again from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on the already kzfree'd memory, which is also consistent with the observation of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected at a later point in time when poison is checked on new allocation). Reference counting of auth keys revisited: Shared keys for AUTH chunks are being stored in endpoints and associations in endpoint_shared_keys list. On endpoint creation, a null key is being added; on association creation, all endpoint shared keys are being cached and thus cloned over to the association. struct sctp_shared_key only holds a pointer to the actual key bytes, that is, struct sctp_auth_bytes which keeps track of users internally through refcounting. Naturally, on assoc or enpoint destruction, sctp_shared_key are being destroyed directly and the reference on sctp_auth_bytes dropped. User space can add keys to either list via setsockopt(2) through struct sctp_authkey and by passing that to sctp_auth_set_key() which replaces or adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes with refcount 1 and in case of replacement drops the reference on the old sctp_auth_bytes. A key can be set active from user space through setsockopt() on the id via sctp_auth_set_active_key(), which iterates through either endpoint_shared_keys and in case of an assoc, invokes (one of various places) sctp_auth_asoc_init_active_key(). sctp_auth_asoc_init_active_key() computes the actual secret from local's and peer's random, hmac and shared key parameters and returns a new key directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops the reference if there was a previous one. The secret, which where we eventually double drop the ref comes from sctp_auth_asoc_set_secret() with intitial refcount of 1, which also stays unchanged eventually in sctp_assoc_update(). This key is later being used for crypto layer to set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac(). To close the loop: asoc->asoc_shared_key is freshly allocated secret material and independant of the sctp_shared_key management keeping track of only shared keys in endpoints and assocs. Hence, also commit 4184b2a79a76 ("net: sctp: fix memory leak in auth key management") is independant of this bug here since it concerns a different layer (though same structures being used eventually). asoc->asoc_shared_key is reference dropped correctly on assoc destruction in sctp_association_free() and when active keys are being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is to remove that sctp_auth_key_put() from there which fixes these panics. Fixes: 730fc3d05cd4 ("[SCTP]: Implete SCTP-AUTH parameter processing") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26flow_dissector: add tipc supportErik Hugne1-0/+14
The flows are hashed on the sending node address, which allows us to spread out the TIPC link processing to RPS enabled cores. There is no point to include the destination address in the hash as that will always be the same for all inbound links. We have experimented with a 3-tuple hash over [srcnode, sport, dport], but this showed to give slightly lower performance because of increased lock contention when the same link was handled by multiple cores. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26tipc: fix excessive network event loggingErik Hugne2-21/+21
If a large number of namespaces is spawned on a node and TIPC is enabled in each of these, the excessive printk tracing of network events will cause the system to grind down to a near halt. The traces are still of debug value, so instead of removing them completely we fix it by changing the link state and node availability logging debug traces. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: act_bpf: fix size mismatch on filter preparationDaniel Borkmann1-0/+3
Similarly as in cls_bpf, also this code needs to reject mismatches. Reference: http://article.gmane.org/gmane.linux.network/347406 Fixes: d23b8ad8ab23 ("tc: add BPF based action") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: cls_basic: return from walking on match in basic_getDaniel Borkmann1-2/+5
As soon as we've found a matching handle in basic_get(), we can return it. There's no need to continue walking until the end of a filter chain, since they are unique anyway. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Cc: Thomas Graf <tgraf@suug.ch> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: cls_bpf: fix auto generation of per list handlesDaniel Borkmann1-2/+8
When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26net: cls_bpf: fix size mismatch on filter preparationDaniel Borkmann1-0/+5
In cls_bpf_modify_existing(), we read out the number of filter blocks, do some sanity checks, allocate a block on that size, and copy over the BPF instruction blob from user space, then pass everything through the classic BPF checker prior to installation of the classifier. We should reject mismatches here, there are 2 scenarios: the number of filter blocks could be smaller than the provided instruction blob, so we do a partial copy of the BPF program, and thus the instructions will either be rejected from the verifier or a valid BPF program will be run; in the other case, we'll end up copying more than we're supposed to, and most likely the trailing garbage will be rejected by the verifier as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be last instruction, load/stores must be correct, etc); in case not, we would leak memory when dumping back instruction patterns. The code should have only used nla_len() as Dave noted to avoid this from the beginning. Anyway, lets fix it by rejecting such load attempts. Fixes: 7d1d65cb84e1 ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Add support for unique flow IDs.Joe Stringer6-91/+415
Previously, flows were manipulated by userspace specifying a full, unmasked flow key. This adds significant burden onto flow serialization/deserialization, particularly when dumping flows. This patch adds an alternative way to refer to flows using a variable-length "unique flow identifier" (UFID). At flow setup time, userspace may specify a UFID for a flow, which is stored with the flow and inserted into a separate table for lookup, in addition to the standard flow table. Flows created using a UFID must be fetched or deleted using the UFID. All flow dump operations may now be made more terse with OVS_UFID_F_* flags. For example, the OVS_UFID_F_OMIT_KEY flag allows responses to omit the flow key from a datapath operation if the flow has a corresponding UFID. This significantly reduces the time spent assembling and transacting netlink messages. With all OVS_UFID_F_OMIT_* flags enabled, the datapath only returns the UFID and statistics for each flow during flow dump, increasing ovs-vswitchd revalidator performance by 40% or more. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Use sw_flow_key_range for key ranges.Joe Stringer1-11/+9
These minor tidyups make a future patch a little tidier. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Refactor ovs_flow_tbl_insert().Joe Stringer1-7/+14
Rework so that ovs_flow_tbl_insert() calls flow_{key,mask}_insert(). This tidies up a future patch. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26openvswitch: Refactor ovs_nla_fill_match().Joe Stringer3-40/+46
Refactor the ovs_nla_fill_match() function into separate netlink serialization functions ovs_nla_put_{unmasked_key,mask}(). Modify ovs_nla_put_flow() to handle attribute nesting and expose the 'is_mask' parameter - all callers need to nest the flow, and callers have better knowledge about whether it is serializing a mask or not. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-26NFC: nfc_disable_se Remove useless blank line at beginning of functionChristophe Ricard1-1/+0
Remove one useless blank line at beginning of nfc_disable_se function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-26NFC: nfc_enable_se Remove useless blank line at beginning of functionChristophe Ricard1-1/+0
Remove one useless blank line at beginning of nfc_enable_se function. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-26ipv6: tcp: fix race in IPV6_2292PKTOPTIONSEric Dumazet1-6/+2
IPv6 TCP sockets store in np->pktoptions skbs, and use skb_set_owner_r() to charge the skb to socket. It means that destructor must be called while socket is locked. Therefore, we cannot use skb_get() or atomic_inc(&skb->users) to protect ourselves : kfree_skb() might race with other users manipulating sk->sk_forward_alloc Fix this race by holding socket lock for the duration of ip6_datagram_recv_ctl() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25bridge: simplify br_getlink() a bitDan Carpenter1-6/+3
Static checkers complain that we should maybe set "ret" before we do the "goto out;". They interpret the NULL return from br_port_get_rtnl() as a failure and forgetting to set the error code is a common bug in this situation. The code is confusing but it's actually correct. We are returning zero deliberately. Let's re-write it a bit to be more clear. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25ipv6: Fix __ip6_route_redirectMartin KaFai Lau1-1/+5
In my last commit (a3c00e4: ipv6: Remove BACKTRACK macro), the changes in __ip6_route_redirect is incorrect. The following case is missed: 1. The for loop tries to find a valid gateway rt. If it fails to find one, rt will be NULL. 2. When rt is NULL, it is set to the ip6_null_entry. 3. The newly added 'else if', from a3c00e4, will stop the backtrack from happening. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net: dsa: set slave MII bus PHY maskVivien Didelot1-0/+1
When registering a mdio bus, Linux assumes than every port has a PHY and tries to scan it. If a switch port has no PHY registered, DSA will fail to register the slave MII bus. To fix this, set the slave MII bus PHY mask to the switch PHYs mask. As an example, if we use a Marvell MV88E6352 (which is a 7-port switch with no registered PHYs for port 5 and port 6), with the following declared names: static struct dsa_chip_data switch_cdata = { [...] .port_names[0] = "sw0", .port_names[1] = "sw1", .port_names[2] = "sw2", .port_names[3] = "sw3", .port_names[4] = "sw4", .port_names[5] = "cpu", }; DSA will fail to create the switch instance. With the PHY mask set for the slave MII bus, only the PHY for ports 0-4 will be scanned and the instance will be successfully created. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net: ipv6: Add sysctl entry to disable MTU updates from RAHarout Hedeshian2-1/+11
The kernel forcefully applies MTU values received in router advertisements provided the new MTU is less than the current. This behavior is undesirable when the user space is managing the MTU. Instead a sysctl flag 'accept_ra_mtu' is introduced such that the user space can control whether or not RA provided MTU updates should be applied. The default behavior is unchanged; user space must explicitly set this flag to 0 for RA MTUs to be ignored. Signed-off-by: Harout Hedeshian <harouth@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Various clean-ups for handling slenAlexander Duyck1-20/+29
While doing further work on the fib_trie I noted a few items. First I was using calls that were far more complicated than they needed to be for determining when to push/pull the suffix length. I have updated the code to reflect the simplier logic. The second issue is that I realised we weren't necessarily handling the case of a leaf_info struct surviving a flush. I have updated the logic so that now we will call pull_suffix in the event of having a leaf info value left in the leaf after flushing it. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Move fib_find_alias to file where it is usedAlexander Duyck3-19/+20
The function fib_find_alias is only accessed by functions in fib_trie.c as such it makes sense to relocate it and cast it as static so that the compiler can take advantage of optimizations it can do to it as a local function. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Use empty_children instead of counting empty nodes in stats collectionAlexander Duyck1-7/+1
It doesn't make much sense to count the pointers ourselves when empty_children already has a count for the number of NULL pointers stored in the tnode. As such save ourselves the cycles and just use empty_children. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Add collapse() and should_collapse() to resizeAlexander Duyck1-35/+65
This patch really does two things. First it pulls the logic for determining if we should collapse one node out of the tree and the actual code doing the collapse into a separate pair of functions. This helps to make the changes to these areas more readable. Second it encodes the upper 32b of the empty_children value onto the full_children value in the case of bits == KEYLENGTH. By doing this we are able to handle the case of a 32b node where empty_children would appear to be 0 when it was actually 1ul << 32. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Fall back to slen update on inflate/halve failureAlexander Duyck1-5/+5
This change corrects an issue where if inflate or halve fails we were exiting the resize function without at least updating the slen for the node. To correct this I have moved the update of max_size into the while loop so that it is only decremented on a successful call to either inflate or halve. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Fix RCU bug and merge similar bits of inflate/halveAlexander Duyck1-84/+73
This patch addresses two issues. The first issue is the fact that I believe I had the RCU freeing sequence slightly out of order. As a result we could get into an issue if a caller went into a child of a child of the new node, then backtraced into the to be freed parent, and then attempted to access a child of a child that may have been consumed in a resize of one of the new nodes children. To resolve this I have moved the resize after we have freed the oldtnode. The only side effect of this is that we will now be calling resize on more nodes in the case of inflate due to the fact that we don't have a good way to test to see if a full_tnode on the new node was there before or after the allocation. This should have minimal impact however since the node should already be correctly size so it is just the cost of calling should_inflate that we will be taking on the node which is only a couple of cycles. The second issue is the fact that inflate and halve were essentially doing the same thing after the new node was added to the trie replacing the old one. As such it wasn't really necessary to keep the code in both functions so I have split it out into two other functions, called replace and update_children. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25fib_trie: Use index & (~0ul << n->bits) instead of index >> n->bitsAlexander Duyck1-8/+8
In doing performance testing and analysis of the changes I recently found that by shifting the index I had created an unnecessary dependency. I have updated the code so that we instead shift a mask by bits and then just test against that as that should save us about 2 CPU cycles since we can generate the mask while the key and pos are being processed. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net: llc: use correct size for sysctl timeout entriesSasha Levin1-4/+4
The timeout entries are sizeof(int) rather than sizeof(long), which means that when they were getting read we'd also leak kernel memory to userspace along with the timeout values. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24vxlan: Eliminate dependency on UDP socket in transmit pathTom Herbert1-4/+2
In the vxlan transmit path there is no need to reference the socket for a tunnel which is needed for the receive side. We do, however, need the vxlan_dev flags. This patch eliminate references to the socket in the transmit path, and changes VXLAN_F_UNSHAREABLE to be VXLAN_F_RCV_FLAGS. This mask is used to store the flags applicable to receive (GBP, CSUM6_RX, and REMCSUM_RX) in the vxlan_sock flags. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24udp: Do not require sock in udp_tunnel_xmit_skbTom Herbert3-14/+15
The UDP tunnel transmit functions udp_tunnel_xmit_skb and udp_tunnel6_xmit_skb include a socket argument. The socket being passed to the functions (from VXLAN) is a UDP created for receive side. The only thing that the socket is used for in the transmit functions is to get the setting for checksum (enabled or zero). This patch removes the argument and and adds a nocheck argument for checksum setting. This eliminates the unnecessary dependency on a UDP socket for UDP tunnel transmit. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23vxlan: advertise netns of vxlan dev in fdb msgNicolas Dichtel1-0/+1
Netlink FDB messages are sent in the link netns. The header of these messages contains the ifindex (ndm_ifindex) of the netdevice, but this ifindex is unusable in case of x-netns vxlan. I named the new attribute NDA_NDM_IFINDEX_NETNSID, to avoid confusion with NDA_IFINDEX. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23vlan: advertise link netns via netlinkNicolas Dichtel1-0/+8
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23ip6gretap: advertise link netns via netlinkNicolas Dichtel1-0/+1
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23rtnl: fix error path when adding an iface with a link netNicolas Dichtel1-1/+4
If an error occurs when the netdevice is moved to the link netns, a full cleanup must be done. Fixes: 317f4810e45e ("rtnl: allow to create device with IFLA_LINK_NETNSID set") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23act_connmark: Add missing dependency on NF_CONNTRACK_MARKThomas Graf1-0/+1
Depending on NETFILTER is not sufficient to ensure the presence of the 'mark' field in nf_conn, also needs to depend on NF_CONNTRACK_MARK. Fixes: 22a5dc ("net: sched: Introduce connmark action") Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 06:49:51 +0000