summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)AuthorFilesLines
2010-07-28[SCSI] qla2xxx: T10 DIF Type 2 supportArun Easi4-6/+43
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Cleanup some dead-code and make some functions static.Andrew Vasquez5-60/+5
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Update copyright banner.Giridhar Malavali22-22/+22
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Rearranged and cleaned up the code for processing the ↵Giridhar Malavali4-40/+25
pending commands. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Updates for ISP82xx.Giridhar Malavali4-289/+42
Re-organized and cleaned up the ISP82xx specific code. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Do not allow ELS Passthru commands for ISP23xx adaptersHarish Zunjarrao1-13/+24
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Add CT passthru support for ISP23xx adaptersHarish Zunjarrao3-10/+162
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Don't issue set or get port param MBC if remote port is not ↵Madhuranath Iyengar1-0/+7
logged in Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Add qla2x00_free_fcports() functionChad Dupuis3-6/+15
This function was added to encapsulate freeing the memory for all the fcports associated with a particular vha. Also added a call to qla2x00_free_fcports() to qla2x00_free_device() to free the memory for all the fcports associated with a vha during device removal. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Stop firmware before doing init firmware.Andrew Vasquez1-2/+3
If BIOS is enabled then drivers init firmware fails since BIOS has done the init once. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Propogate transport disrupted status for cable pull ↵Duane Grigsby1-0/+3
conditions for faster failover. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Correct extended sense-data handling.Andrew Vasquez1-9/+18
Earlier implementation did not take into account the varying sizes of data buffers returned from structures sts_entry_t and sts_entry_24xx. Sense-data after the 20th byte could be incorrect. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Check for golden firmware and show version if availableMadhuranath Iyengar3-0/+42
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into ↵Chad Dupuis4-1/+103
Nx_Ports The default method that qla2xxx uses is the GID_PT nameserver command to get a list of Nx_Ports. This patch adds a GFF_ID call for each port returned by GID_PT to get the FC4 type. If the FC4 type is not FCP SCSI then the qla2xxx driver will not record that port in it's port database. For switches that do not support the GFF_ID command, the behavior will be for qla2xxx to store that port anyways. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Appropriately log FCP priority data messagesMadhuranath Iyengar3-20/+48
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Removed dependency for SRB structure for Marker processingGiridhar Malavali5-240/+19
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla2xxx: Don't issue set or get port param MBC if invalid port loop idMadhuranath Iyengar1-0/+7
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Updated version number to 8.03.03-k0.Giridhar Malavali1-3/+3
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: For ISP 23xx, select user specified login timeout value if ↵Andrew Vasquez1-10/+22
greater than minuimum value(4 secs). Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Removed redundant check for ISP 84xx.Giridhar Malavali1-1/+1
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Enable CRB based doorbell posting for request queue as ↵Giridhar Malavali2-5/+10
default for ISP 82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: T10 DIF enablement for 81XXArun Easi2-3/+3
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Fix flash write failure on ISP82xx.Lalit Chandivade1-3/+4
Driver was not unprotecting correctly, use correct bits to unprotect the flash on ISP 82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Handle outstanding mbx cmds on hung f/w scenarios.Santosh Vernekar4-24/+78
Outstanding mailbox commands, have no way to recover on f/w hung, and we timeout on waiting for mbx response. This in turn affects the recovery process as follows: - We might already be in dpc while waiting for mbx to complete, so recovery for that pci function will never get invoked. Reset Timeout (10 sec) is far less than mbx timeout (30 sec). - Other mbx cmds will get stuck due to serial mbx access. Solution is to identify fw-hung scenario and handle outstanding mbx commands to have an early-exit instead of waiting for response. Other mbx commands waiting for access will also do an early-exit if fw-hung is still applicable. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Do not enable VP in non fabric topology.Lalit Chandivade1-1/+2
After topology change ISP is reset and VPs are re-enabled. If the topology is not fabric, VPs could falsely get enabled. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware ↵Harish Zunjarrao3-7/+215
file. Used bootloder address from FLT while loading FW from flash as well. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Make the FC port capability mutual exclusive.Andrew Vasquez1-2/+2
In case of both target and initiator capabilities reported by fc port, the fc port port capability is made mutualy exclusive with priority given for target capabilities. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Add internal loopback support for ISP81xx.Sarang Radke7-17/+269
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Limit rport-flaps during link-disruptions.Giridhar Malavali1-3/+5
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Correct async-srb issues.Andrew Vasquez2-7/+15
* hold the hardware_lock throughout the duration of ctx-sp timeout handling -- could result in use-after-free oops. * retry a timed-out login-request. * done() routines are called with the hardware-lock held, issue qla2x00_mark_device_lost() with proper 'defer' flag. * FCP2 capabilities are only relevant to target devices. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Correct use-after-free oops seen during EH-abort.Giridhar Malavali2-1/+31
Hold a reference to the srb (sp) while aborting an I/O -- as the I/O can/will complete from within the interrupt-context. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Fix cpu-affinity usage for non-capable ISPs.Giridhar Malavali1-4/+4
The TMFs used for pre-24xx ISPs incorrectly assumed 'cpu' tag data could be valid. These chips have no multi-q/cpu-affinity support. This corrects an oops seen on ISP23xx parts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Add portid to async-request messages.Andrew Vasquez2-16/+31
This helps to correlate submission/completion messages during triaging. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] qla2xxx: Clear drive active CRB register when not in use.Giridhar Malavali6-5/+13
The CRB drive active register is cleared when driver is unloaded or when driver enters failed state. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-21sysfs: add struct file* to bin_attr callbacksChris Wright1-16/+16
This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-16[SCSI] qla2xxx: Updates to ISP82xx support.Giridhar Malavali4-144/+111
1) Allow transition to NEED RESET state only from READY state for ISP82xx. 2) Avoid infinite ISP aborts when chip reset fails. 3) Code cleanup to remove some of the unused debug code. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Optionally disable target reset.Giridhar Malavali2-1/+8
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are ↵Lalit Chandivade2-1/+51
mutually exclusive The problem occurring is a hw-race where there's an outstanding read-flash operation occurring while the chip is being reset (done via an sg_reset script). After the chip is paused, the read-flash operation never completes and the DPC thread, while trying to complete the reset, is never able to recover, as the HW appears to be hung... The fix is to wait for outstanding flash operation prior to doing a sg_reset -h. And to wait for reset to complete before any flash operations. Note, during the wait, if any of the operation (reset/flash) does not complete, failure is returned to the upper layer. The upper layer either need to fail or retry. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.Mike Waychison1-2/+2
The qla2xxx driver uses a port_id_t to mark the start of its enumerations. gcc is complaining that wrap.b24 may be used uninitialized, but this doesn't look to be possible. Silence it. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: T10 DIF support added.Arun Easi10-12/+1053
Signed-off-by: Duane Grigsby <duane.grigsby@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Support for asynchronous TM and Marker IOCBs.Madhuranath Iyengar8-4/+366
Currently we can only issue the task management (TM) commands via the mailbox mechanism. This is a limitation, since only one mailbox command can be issued at a time. The purpose of this effort is to provide support for issuing and processing the respose to TM and Marker IOCBs asynchronously. Towards achieving this, the consolidated srb architecture that is currently used for BSG and IOCB/Logio commands has been enhanced and used. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Provide common framework for BSG and IOCB commands.Madhuranath Iyengar7-142/+162
Currently, BSG and IOCB/Logio commands have a different framework (srb structs). The purpose of this effort is to consolidate them into a generalized framework for these as well as other asynchronous operations in the future. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Cleanup FCP-command-status processing debug statements.Andrew Vasquez1-129/+63
Migrate to a consistent set of debug entries during status-IOCB handling: * group CS_TIMEOUT handling with CS_PORT_UNAVAILABLE and the like (more regrouping of common behaviour). * drop CS_DATA_OVERRUN handling as it now falls into the 'default' case (still returns DID_ERROR). * consolidate CS_RESET and CS_ABORTED handling, as we the only functional difference was a printk() (still returns DID_RESET). * dropped all the earlier inconsistent [qla_]printk()s sprinkled throught the needlessly large case-statement. Failure case I/Os are now logged with a 'standard' format: <command failure details> <command generic details> so, for example a dropped-frame is logged as: qla2xxx 0000:13:00.0: scsi(16:0:0) Dropped frame(s) detected (4000 of 4000 bytes). qla2xxx 0000:13:00.0: scsi(16:0:0) FCP command status: 0x15-0x18 (70018) \ oxid=78 ser=76 cdb=280000 len=4000 rsp_info=0 resid=0 fw_resid=4000 which should now convey all relevant information. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Limit mailbox command contention for ADISC requests.Andrew Vasquez6-28/+178
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Further generalization of SRB CTX infrastructure.Andrew Vasquez3-69/+65
Prepare CTX infrastructure for additional asynchronous executions, add generic done() operator, pull CMD definitions. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Add char device to increase driver use countHarish Zunjarrao2-1/+16
The driver should not be unloaded if any application is using it. To disallow driver unload, driver use count must be incremented. Application uses this char device as handle and increases driver use count to avoid possible driver unload. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Clear error status after uncorrectable non-fatal errors.Lalit Chandivade1-1/+2
Currently error status is cleared only after the uncorrectable fatal errors in the qla2xxx_pci_slot_reset. This fix is added to clear the error status in qla2xxx_pci_resume. This way for both fatal and non-fatal errors the error status gets cleared properly. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=572258 Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Display proper link state for disconnected ports.Andrew Vasquez1-1/+2
With qla2xxx using mid-layer async-scsi-scanning, the link state for disconnected port is displayed wrong. Additional check for cable presence is considered to display proper link state. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] qla2xxx: Check for ISP84xx before processing to get 84xx firmware ↵Andrew Vasquez1-3/+5
version. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-01[SCSI] qla2xxx: Add ISP82XX support.Giridhar Malavali15-125/+5518
Enhanced the driver to support new FCoE host bus adapter. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 20:49:38 +0000