summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-01-14atl1e: update statistics codeSabrina Dubroca1-11/+19
As Ben Hutchings pointed out for the stats in alx, some hardware-specific stats aren't matched to the right net_device_stats field. Also fix the collision field and include errors in the total number of RX/TX packets. Minor whitespace fixes to match the style in alx. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14atl1c: update statistics codeSabrina Dubroca1-11/+20
As Ben Hutchings pointed out for the stats in alx, some hardware-specific stats aren't matched to the right net_device_stats field. Also fix the collision field and include errors in the total number of RX/TX packets. Minor whitespace fixes to match the style in alx. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Spelling s/transmition/transmission/Geert Uytterhoeven4-5/+5
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: amd8111e: Spelling s/recive/receive/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14bnx2x: Correct default Tx switching behaviourYuval Mintz5-1/+75
With this patch bnx2x will configure the PF to perform Tx switching on out-going traffic as soon as SR-IOV is dynamically enabled and de-activate it when it is disabled. This will allow VFs to communicate with their parent PFs. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller3-8/+27
Marc Kleine-Budde says: ==================== this is a pull request of three patches for net-next/master. Oleg Moroz added support for a new PCI card to the generic SJA1000 PCI driver, Guenter Roeck's patch limits the flexcan driver to little endian arm (and powerpc) and I fixed a sparse warning found by the kbuild robot in the ti_hecc driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane30-51/+50
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ipv6: copy traffic class from ping request to replyHannes Frederic Sowa1-1/+4
Suggested-by: Simon Schneider <simon-schneider@gmx.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ipv4: register igmp_notifier even when !CONFIG_PROC_FSWANG Cong3-5/+9
We still need this notifier even when we don't config PROC_FS. It should be rare to have a kernel without PROC_FS, so just for completeness. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge branch 'netdev_tracing'David S. Miller2-41/+222
Ben Hutchings says: ==================== Improve tracing at the driver/core boundary These patches add static tracpeoints at the driver/core boundary which record various skb fields likely to be useful for datapath debugging. On the TX side the boundary is where the core calls ndo_start_xmit, and on the RX side it is where any of the various exported receive functions is called. The set of skb fields is mostly based on what I thought would be interesting for sfc. These patches are basically the same as what I sent as an RFC in November, but rebased. They now depend on 'net: core: explicitly select a txq before doing l2 forwarding', so please merge net into net-next before trying to apply them. The first patch fixes a code formatting error left behind after that fix. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add trace events for all receive entry points, exposing more skb fieldsBen Hutchings2-39/+161
The existing net/netif_rx and net/netif_receive_skb trace events provide little information about the skb, nor do they indicate how it entered the stack. Add trace events at entry of each of the exported functions, including most fields that are likely to be interesting for debugging driver datapath behaviour. Split netif_rx() and netif_receive_skb() so that internal calls are not traced. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add net_dev_start_xmit trace event, exposing more skb fieldsBen Hutchings2-0/+60
The existing net/net_dev_xmit trace event provides little information about the skb that has been passed to the driver, and it is not simple to add more since the skb may already have been freed at the point the event is emitted. Add a separate trace event before the skb is passed to the driver, including most fields that are likely to be interesting for debugging driver datapath behaviour. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Fix indentation in dev_hard_start_xmit()Ben Hutchings1-2/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller138-439/+785
2014-01-14Merge branch 'skb_checksum_help'David S. Miller4-302/+281
Paul Durrant says: ==================== make skb_checksum_setup generally available Both xen-netfront and xen-netback need to be able to set up the partial checksum offset of an skb and may also need to recalculate the pseudo- header checksum in the process. This functionality is currently private and duplicated between the two drivers. Patch #1 of this series moves the implementation into the core network code as there is nothing xen-specific about it and it is potentially useful to any network driver. Patch #2 removes the private implementation from netback. Patch #3 removes the private implementation from netfront. v2: - Put skb_checksum_setup in skbuff.c rather than dev.c - remove inline ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14xen-netfront: use new skb_checksum_setup functionPaul Durrant1-45/+3
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14xen-netback: use new skb_checksum_setup functionPaul Durrant1-257/+3
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: add skb_checksum_setupPaul Durrant2-0/+275
This patch adds a function to set up the partial checksum offset for IP packets (and optionally re-calculate the pseudo-header checksum) into the core network code. The implementation was previously private and duplicated between xen-netback and xen-netfront, however it is not xen-specific and is potentially useful to any network driver. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13bridge: move br_net_exit() to br.cWANG Cong3-19/+18
And it can become static. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: usbnet: fix SG initialisationBjørn Mork1-1/+1
Commit 60e453a940ac ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a940ac ("USBNET: fix handling padding packet") Reported-by: Thomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: 3com: fix warning for incorrect type in argumentdingtianhong1-1/+1
The commit c466a9b2b329f7d9982c14eedc83a923d3bc711c (net: 3com: slight optimization of addr compare) cause a warning: "passing argument 1 of 'ether_addr_equal' from incompatible pointer type", so fix it. I think julia will convert ether_addr_equal to ether_addr_equal_64bits later. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: qlcnic: fix warning for incorrect type in argumentdingtianhong1-1/+1
The commit 6878f79a8b71e8c7b0587a1185584f54fd31f185 (net: qlcnic: slight optimization of addr compare) cause a warning "sparse: incorrect type in argument 2 (different type sizes)", so fix it. I think julia will convert ether_addr_equal to ether_addr_equal_64bits later. Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13sh_eth: fix garbled TX error messageSergei Shtylyov1-4/+4
sh_eth_error() in case of a TX error tries to print a message using 2 dev_err() calls with the first string not finished by '\n', so that the resulting message would inevitably come out garbled, with something like "3net eth0: " inserted in the middle. Avoid that by merging 2 calls into one. While at it, insert an empty line after the nearby declaration. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge branch 'master' of ↵David S. Miller8-48/+139
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Conflicts: net/xfrm/xfrm_policy.c Steffen Klassert says: ==================== This pull request has a merge conflict between commits be7928d20bab ("net: xfrm: xfrm_policy: fix inline not at beginning of declaration") and da7c224b1baa ("net: xfrm: xfrm_policy: silence compiler warning") from the net-next tree and commit 2f3ea9a95c58 ("xfrm: checkpatch erros with inline keyword position") from the ipsec-next tree. The version from net-next can be used, like it is done in linux-next. 1) Checkpatch cleanups, from Weilong Chen. 2) Fix lockdep complaints when pktgen is used with IPsec, from Fan Du. 3) Update pktgen to allow any combination of IPsec transport/tunnel mode and AH/ESP/IPcomp type, from Fan Du. 4) Make pktgen_dst_metrics static, Fengguang Wu. 5) Compile fix for pktgen when CONFIG_XFRM is not set, from Fan Du. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait socketsNeal Cardwell1-1/+4
Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock (not just TIME_WAIT), and for such sockets the tw_substate field holds the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2. This brings the inet_diag state-matching code in line with the field it uses to populate idiag_state. This is also analogous to the info exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state and get_timewait4_sock() exports tw->tw_substate. Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi state time-wait" would also return sockets in state TCP_FIN_WAIT2. This is an old bug that predates 05dbc7b ("tcp/dccp: remove twchain"). Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge branch 'bonding_rcu'David S. Miller1-18/+19
Veaceslav Falico says: ==================== bonding: fix bond_3ad RCU usage While digging through bond_3ad.c I've found that the RCU usage there is just wrong - it's used as a kind of mutex/spinlock instead of RCU. v3->v4: remove useless goto and wrap __get_first_agg() in proper RCU. v2->v3: make bond_3ad_set_carrier() use RCU read lock for the whole function, so that all other functions will be protected by RCU as well. This way we can use _rcu variants everywhere. v1->v2: use generic primitives instead of _rcu ones cause we can hold RTNL lock without RCU one, which is still safe. This patchset is on top of bond_3ad.c cleanup: http://www.spinics.net/lists/netdev/msg265447.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13bonding: fix __get_active_agg() RCU logicVeaceslav Falico1-6/+4
Currently, the implementation is meaningless - once again, we take the slave structure and use it after we've exited RCU critical section. Fix this by removing the rcu_read_lock() from __get_active_agg(), and ensuring that all its callers are holding RCU. Fixes: be79bd048 ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13bonding: fix __get_first_agg RCU usageVeaceslav Falico1-1/+4
Currently, the RCU read lock usage is just wrong - it gets the slave struct under RCU and continues to use it when RCU lock is released. However, it's still safe to do this cause we didn't need the rcu_read_lock() initially - all of the __get_first_agg() callers are either holding RCU read lock or the RTNL lock, so that we can't sync while in it. Fixes: be79bd048 ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13bonding: fix bond_3ad_set_carrier() RCU usageVeaceslav Falico1-11/+11
Currently, its usage is just plainly wrong. It first gets a slave under RCU, and, after releasing the RCU lock, continues to use it - whilst it can be freed. Fix this by ensuring that bond_3ad_set_carrier() holds RCU till it uses its slave (or its agg). Fixes: be79bd048ab ("bonding: add RCU for bond_3ad_state_machine_handler()") CC: dingtianhong@huawei.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller43-768/+1652
Included changes: - drop dependency against CRC16 - move to new release version - add size check at compile time for packet structs - update copyright years in every file - implement new bonding/interface alternation feature Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: resort some Kbuild files to hopefully help avoid some conflictsStephen Rothwell6-6/+6
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge branch 'qlcnic'David S. Miller12-63/+184
Shahed Shaikh says: ==================== This series includes following changes: o SRIOV and VLAN filtering related enhancements which includes - Do MAC learning for PF - Restrict VF from configuring any VLAN mode - Enable flooding on PF - Turn on promiscuous mode for PF o Bug fix in qlcnic_sriov_cleanup() introduced by commit 154d0c81("qlcnic: VLAN enhancement for 84XX adapters") o Beaconing support for 83xx and 84xx series adapters o Allow 82xx adapter to perform IPv6 LRO even if destination IP address is not programmed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Update version to 5.3.54Shahed Shaikh1-2/+2
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Enable IPv6 LRO even if IP address is not programmedShahed Shaikh1-2/+2
o Enabling BIT_9 while configuring hardware LRO allows adapter to perform LRO even if destination IP address is not programmed in adapter. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Fix SR-IOV cleanup code pathManish Chopra1-3/+1
o Add __QLCNIC_SRIOV_ENABLE bit check before doing SRIOV cleanup Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Enable beaconing for 83xx/84xx Series adapter.Himanshu Madhani7-24/+70
o Refactored code to handle beaconing test for all adapters. o Use GET_LED_CONFIG mailbox command for 83xx/84xx series adapter to detect current beaconing state of the adapter. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Do MAC learning for SRIOV PF.Sucheta Chakraborty6-31/+64
o MAC learning will be done for SRIOV PF to help program VLAN filters onto adapter. This will help VNIC traffic to flow through without flooding traffic. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Turn on promiscous mode for SRIOV PF.Sucheta Chakraborty1-0/+4
o By default, SRIOV PF will have promiscous mode on. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Enable VF flood bit on PF.Sucheta Chakraborty1-0/+30
o On enabling VF flood bit, PF driver will be able to receive traffic from all its VFs. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13qlcnic: Restrict VF from configuring any VLAN mode.Sucheta Chakraborty1-1/+11
o Adapter should allow vlan traffic only for vlans configured on a VF. On configuring any vlan mode from VF, adapter will allow any vlan traffic to pass for that VF. Do not allow VF to configure this mode. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: make dev_set_mtu() honor notification return codeVeaceslav Falico1-9/+25
Currently, after changing the MTU for a device, dev_set_mtu() calls NETDEV_CHANGEMTU notification, however doesn't verify it's return code - which can be NOTIFY_BAD - i.e. some of the net notifier blocks refused this change, and continues nevertheless. To fix this, verify the return code, and if it's an error - then revert the MTU to the original one, notify again and pass the error code. CC: Jiri Pirko <jiri@resnulli.us> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13packet: doc: describe PACKET_MMAP with one packet socket for rx and txNorbert van Bolhuis1-0/+18
Document how to use one AF_PACKET mmap socket for RX and TX. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13sctp: make sctp_addto_chunk_fixed localstephen hemminger2-3/+4
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add of_phy_attachAndy Fleming2-0/+30
10G PHYs don't currently support running the state machine, which is implicitly setup via of_phy_connect(). Therefore, it is necessary to implement an OF version of phy_attach(), which does everything except start the state machine. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Support attaching to generic 10g driverAndy Fleming2-13/+11
phy_attach_direct() may now attach to a generic 10G driver. It can also be used exactly as phy_connect_direct(), which will be useful when using of_mdio, as phy_connect (and therefore of_phy_connect) start the PHY state machine, which is currently irrelevant for 10G PHYs. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add generic 10G driverAndy Fleming1-0/+81
Very incomplete, but will allow for binding an ethernet controller to it. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: turn genphy_driver to an arrayShaohui Xie1-8/+21
Then other generic phy driver such as generic 10g phy driver can join it. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: introduce PHY_INTERFACE_MODE_XGMII for 10G PHYAndy Fleming2-0/+2
Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add Clause 45 read/write functionsAndy Fleming1-0/+39
Need an extra parameter to read or write Clause 45 PHYs, so need a different API with the extra parameter. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13l2tp: make local functions staticstephen hemminger2-6/+2
Avoid needless export of local functions Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>