1 files changed, 73 insertions, 13 deletions

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 3369d1f6a39c..dcd5db5e34e5 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -275,6 +275,19 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 #define ew16flash(reg,val)	__ew16flash(hw, (reg), (val))
 #define ew32flash(reg,val)	__ew32flash(hw, (reg), (val))
 
+static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+{
+	u32 ctrl;
+
+	ctrl = er32(CTRL);
+	ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
+	ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
+	ew32(CTRL, ctrl);
+	udelay(10);
+	ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+	ew32(CTRL, ctrl);
+}
+
 /**
  *  e1000_init_phy_params_pchlan - Initialize PHY function pointers
  *  @hw: pointer to the HW structure
@@ -284,7 +297,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
 static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	u32 ctrl, fwsm;
+	u32 fwsm;
 	s32 ret_val = 0;
 
 	phy->addr                     = 1;
@@ -308,13 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	 */
 	fwsm = er32(FWSM);
 	if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
-		ctrl = er32(CTRL);
-		ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
-		ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
-		ew32(CTRL, ctrl);
-		udelay(10);
-		ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
-		ew32(CTRL, ctrl);
+		e1000_toggle_lanphypc_value_ich8lan(hw);
 		msleep(50);
 
 		/*
@@ -3586,17 +3593,16 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
 }
 
 /**
- *  e1000e_disable_gig_wol_ich8lan - disable gig during WoL
+ *  e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
  *  @hw: pointer to the HW structure
  *
  *  During S0 to Sx transition, it is possible the link remains at gig
  *  instead of negotiating to a lower speed.  Before going to Sx, set
  *  'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
- *  to a lower speed.
- *
- *  Should only be called for applicable parts.
+ *  to a lower speed.  For PCH and newer parts, the OEM bits PHY register
+ *  (LED, GbE disable and LPLU configurations) also needs to be written.
  **/
-void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 {
 	u32 phy_ctrl;
 	s32 ret_val;
@@ -3616,6 +3622,60 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
+ *  @hw: pointer to the HW structure
+ *
+ *  During Sx to S0 transitions on non-managed devices or managed devices
+ *  on which PHY resets are not blocked, if the PHY registers cannot be
+ *  accessed properly by the s/w toggle the LANPHYPC value to power cycle
+ *  the PHY.
+ **/
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
+{
+	u32 fwsm;
+
+	if (hw->mac.type != e1000_pch2lan)
+		return;
+
+	fwsm = er32(FWSM);
+	if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) {
+		u16 phy_id1, phy_id2;
+		s32 ret_val;
+
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			e_dbg("Failed to acquire PHY semaphore in resume\n");
+			return;
+		}
+
+		/* Test access to the PHY registers by reading the ID regs */
+		ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
+		if (ret_val)
+			goto release;
+		ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
+		if (ret_val)
+			goto release;
+
+		if (hw->phy.id == ((u32)(phy_id1 << 16) |
+				   (u32)(phy_id2 & PHY_REVISION_MASK)))
+			goto release;
+
+		e1000_toggle_lanphypc_value_ich8lan(hw);
+
+		hw->phy.ops.release(hw);
+		msleep(50);
+		e1000_phy_hw_reset(hw);
+		msleep(50);
+		return;
+	}
+
+release:
+	hw->phy.ops.release(hw);
+
+	return;
+}
+
+/**
  *  e1000_cleanup_led_ich8lan - Restore the default LED operation
  *  @hw: pointer to the HW structure
  *