1 files changed, 0 insertions, 137 deletions
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
deleted file mode 100644
index 1b4d7b1d4ec1..000000000000
--- a/arch/ppc/boot/simple/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Initial board bringup code for many different boards.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/reg.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- *      Begin at some arbitrary location in RAM or Flash
- *	  Initialize core registers
- *	  Configure memory controller (Not executing from RAM)
- *	Move the boot code to the link address (8M)
- *	  Setup C stack
- *	  Initialize UART
- *      Decompress the kernel to 0x0
- *      Jump to the kernel entry
- *
- */
-
-	.globl	start
-start:
-	bl	start_
-#ifdef CONFIG_IBM_OPENBIOS
-	/* The IBM "Tree" bootrom knows that the address of the bootrom
-	 * read only structure is 4 bytes after _start.
-	 */
-	.long	0x62726f6d		# structure ID - "brom"
-	.long	0x5f726f00		#              - "_ro\0"
-	.long	1			# structure version
-	.long	bootrom_cmdline		# address of *bootrom_cmdline
-#endif
-
-start_:
-#ifdef CONFIG_FORCE
-	/* We have some really bad firmware.  We must disable the L1
-	 * icache/dcache now or the board won't boot.
-	 */
-	li	r4,0x0000
-	isync
-	mtspr	SPRN_HID0,r4
-	sync
-	isync
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r29,r3	/* On the MBX860, r3 is the board info pointer.
-			 * On the RPXSUPER, r3 points to the NVRAM
-			 * configuration keys.
-			 * On PReP, r3 is the pointer to the residual data.
-			 */
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX_4_FX)
-	/* PPC errata 213: only for Virtex-4 FX */
-	mfccr0  0
-	oris    0,0,0x50000000@h
-	mtccr0  0
-#endif
-
-	mflr	r3	/* Save our actual starting address. */
-
-	/* The following functions we call must not modify r3 or r4.....
-	*/
-#ifdef CONFIG_6xx
-	/* On PReP we must look at the OpenFirmware pointer and sanity
-	 * test it.  On other platforms, we disable the MMU right now
-	 * and other bits.
-	 */
-#ifdef CONFIG_PPC_PREP
-/*
- * Save the OF pointer to r25, but only if the entry point is in a sane
- * location; if not we store 0.  If there is no entry point, or it is
- * invalid, we establish the default MSR value immediately.  Otherwise,
- * we defer doing that, to allow OF functions to be called, until we
- * begin uncompressing the kernel.
- */
-	lis	r8,0x0fff		/* r8 = 0x0fffffff */
-	ori	r8,r8,0xffff
-
-	subc	r8,r8,r5		/* r8 = (r5 <= r8) ? ~0 : 0 */
-	subfe	r8,r8,r8
-	nand	r8,r8,r8
-
-	and.	r5,r5,r8		/* r5 will be cleared if (r5 > r8) */
-	bne+	haveOF
-
-	li	r8,MSR_IP|MSR_FP	/* Not OF: set MSR immediately */
-  	mtmsr	r8
-	isync
-haveOF:
-	mr	r25,r5
-#else
-	bl	disable_6xx_mmu
-#endif
-	bl	disable_6xx_l1cache
-
-	CLEAR_CACHES
-#endif
-
-#ifdef CONFIG_8xx
-	mfmsr	r8		/* Turn off interrupts */
-	li	r9,0
-	ori	r9,r9,MSR_EE
-	andc	r8,r8,r9
-	mtmsr	r8
-
-	/* We do this because some boot roms don't initialize the
-	 * processor correctly. Don't do this if you want to debug
-	 * using a BDM device.
-	 */
-	li	r4,0		/* Zero DER to prevent FRZ */
-	mtspr	SPRN_DER,r4
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r4,r29	/* put the board info pointer where the relocate
-			 * routine will find it
-			 */
-#endif
-
-	/* Get the load address.
-	*/
-	subi	r3, r3, 4	/* Get the actual IP, not NIP */
-	b	relocate
-