cfg80211: allow drivers to support random MAC addresses for scan

Add the necessary feature flags and a scan flag to support using
random MAC addresses for scan while unassociated.

The configuration for this supports an arbitrary MAC address
value and mask, so that any kind of configuration (e.g. fixed
OUI or full 46-bit random) can be requested. Full 46-bit random
is the default when no other configuration is passed.

Also add a small helper function to use the addr/mask correctly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

2 files changed, 54 insertions, 0 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 05aae22e92a5..bb748c4da5af 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1437,6 +1437,10 @@ struct cfg80211_ssid {
  * @aborted: (internal) scan request was notified as aborted
  * @notified: (internal) scan request was notified as done or aborted
  * @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ *	are 0 in the mask should be randomised, bits that are 1 should
+ *	be taken from the @mac_addr
  */
 struct cfg80211_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1451,6 +1455,9 @@ struct cfg80211_scan_request {
 
 	struct wireless_dev *wdev;
 
+	u8 mac_addr[ETH_ALEN] __aligned(2);
+	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
 	/* internal */
 	struct wiphy *wiphy;
 	unsigned long scan_start;
@@ -1461,6 +1468,17 @@ struct cfg80211_scan_request {
 	struct ieee80211_channel *channels[0];
 };
 
+static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
+{
+	int i;
+
+	get_random_bytes(buf, ETH_ALEN);
+	for (i = 0; i < ETH_ALEN; i++) {
+		buf[i] &= ~mask[i];
+		buf[i] |= addr[i] & mask[i];
+	}
+}
+
 /**
  * struct cfg80211_match_set - sets of attributes to match
  *
@@ -1494,6 +1512,10 @@ struct cfg80211_match_set {
  * @channels: channels to scan
  * @min_rssi_thold: for drivers only supporting a single threshold, this
  *	contains the minimum over all matchsets
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ *	are 0 in the mask should be randomised, bits that are 1 should
+ *	be taken from the @mac_addr
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1508,6 +1530,9 @@ struct cfg80211_sched_scan_request {
 	int n_match_sets;
 	s32 min_rssi_thold;
 
+	u8 mac_addr[ETH_ALEN] __aligned(2);
+	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
 	/* internal */
 	struct wiphy *wiphy;
 	struct net_device *dev;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index d23208194e3c..a99081efc2d4 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1686,6 +1686,8 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_OPER_CLASS: operating class
  *
+ * @NL80211_ATTR_MAC_MASK: MAC address mask
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2041,6 +2043,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_OPER_CLASS,
 
+	NL80211_ATTR_MAC_MASK,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4139,6 +4143,18 @@ enum nl80211_ap_sme_features {
  *	See 'macaddr' field in the vif_params (cfg80211.h).
  * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
  *	operating as a TDLS peer.
+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
+ *	random MAC address during scan (if the device is unassociated); the
+ *	%NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
+ *	address mask/value will be used.
+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
+ *	using a random MAC address for every scan iteration during scheduled
+ *	scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ *	be set for scheduled scan and the MAC address mask/value will be used.
+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
+ *	random MAC address for every scan iteration during "net detect", i.e.
+ *	scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
+ *	be set for scheduled scan and the MAC address mask/value will be used.
  */
 enum nl80211_feature_flags {
 	NL80211_FEATURE_SK_TX_STATUS			= 1 << 0,
@@ -4170,6 +4186,9 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_SUPPORTS_WMM_ADMISSION		= 1 << 26,
 	NL80211_FEATURE_MAC_ON_CREATE			= 1 << 27,
 	NL80211_FEATURE_TDLS_CHANNEL_SWITCH		= 1 << 28,
+	NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR		= 1 << 29,
+	NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR	= 1 << 30,
+	NL80211_FEATURE_ND_RANDOM_MAC_ADDR		= 1 << 31,
 };
 
 /**
@@ -4218,11 +4237,21 @@ enum nl80211_connect_failed_reason {
  *	dangerous because will destroy stations performance as a lot of frames
  *	will be lost while scanning off-channel, therefore it must be used only
  *	when really needed
+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
+ *	for scheduled scan: a different one for every scan iteration). When the
+ *	flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
+ *	@NL80211_ATTR_MAC_MASK attributes may also be given in which case only
+ *	the masked bits will be preserved from the MAC address and the remainder
+ *	randomised. If the attributes are not given full randomisation (46 bits,
+ *	locally administered 1, multicast 0) is assumed.
+ *	This flag must not be requested when the feature isn't supported, check
+ *	the nl80211 feature flags for the device.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
 	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
 	NL80211_SCAN_FLAG_AP				= 1<<2,
+	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
 };
 
 /**