From 12097957a9ed13135bfa4c4a9c649e5c9e5ac9ec Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 29 Nov 2013 01:51:25 +0100 Subject: i2c: pca954x: Add reset GPIO support If a reset GPIO support is specified, request the GPIO and get the chip out of reset at probe time. Signed-off-by: Laurent Pinchart Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pca954x.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 2880c38543de..e835304e7b5a 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -36,11 +36,13 @@ */ #include +#include #include #include #include #include #include +#include #include #define PCA954X_MAX_NCHANS 8 @@ -185,6 +187,7 @@ static int pca954x_probe(struct i2c_client *client, { struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); + struct device_node *np = client->dev.of_node; int num, force, class; struct pca954x *data; int ret; @@ -198,6 +201,22 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); + if (IS_ENABLED(CONFIG_OF) && np) { + enum of_gpio_flags flags; + int gpio; + + /* Get the mux out of reset if a reset GPIO is specified. */ + gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags); + if (gpio_is_valid(gpio)) { + ret = devm_gpio_request_one(&client->dev, gpio, + flags & OF_GPIO_ACTIVE_LOW ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, + "pca954x reset"); + if (ret < 0) + return ret; + } + } + /* Write the mux register at addr to verify * that the mux is in fact present. This also * initializes the mux to disconnected state. -- cgit v1.2.3