summaryrefslogtreecommitdiff
path: root/net/core/pktgen.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01proc: Supply a function to remove a proc entry by PDEDavid Howells1-4/+2
Supply a function (proc_remove()) to remove a proc entry (and any subtree rooted there) by proc_dir_entry pointer rather than by name and (optionally) root dir entry pointer. This allows us to eliminate all remaining pde->name accesses outside of procfs. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@linaro.or> cc: linux-acpi@vger.kernel.org cc: openipmi-developer@lists.sourceforge.net cc: devicetree-discuss@lists.ozlabs.org cc: linux-pci@vger.kernel.org cc: netdev@vger.kernel.org cc: netfilter-devel@vger.kernel.org cc: alsa-devel@alsa-project.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-29net/core: remove duplicate statements by do-while loopAkinobu Mita1-9/+6
Remove duplicate statements by using do-while loop instead of while loop. - A; - while (e) { + do { A; - } + } while (e); Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29net/core: rename random32() to prandom_u32()Akinobu Mita1-14/+15
Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro1-3/+3
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-18net: proc: change proc_net_remove to remove_proc_entryGao feng1-2/+2
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+6
Conflicts: drivers/net/ethernet/intel/e1000e/ethtool.c drivers/net/vmxnet3/vmxnet3_drv.c drivers/net/wireless/iwlwifi/dvm/tx.c net/ipv6/route.c The ipv6 route.c conflict is simple, just ignore the 'net' side change as we fixed the same problem in 'net-next' by eliminating cached neighbours from ipv6 routes. The e1000e conflict is an addition of a new statistic in the ethtool code, trivial. The vmxnet3 conflict is about one change in 'net' removing a guarding conditional, whilst in 'net-next' we had a netdev_info() conversion. The iwlwifi conflict is dealing with a WARN_ON() conversion in 'net-next' vs. a revert happening in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29pktgen: correctly handle failures when adding a deviceCong Wang1-3/+6
The return value of pktgen_add_device() is not checked, so even if we fail to add some device, for example, non-exist one, we still see "OK:...". This patch fixes it. After this patch, I got: # echo "add_device non-exist" > /proc/net/pktgen/kpktgend_0 -bash: echo: write error: No such device # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: Result: ERROR: can not add device non-exist # echo "add_device eth0" > /proc/net/pktgen/kpktgend_0 # cat /proc/net/pktgen/kpktgend_0 Running: Stopped: eth0 Result: OK: add_device=eth0 (Candidate for -stable) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29pktgen: support net namespaceCong Wang1-79/+117
v3: make pktgen_threads list per-namespace v2: remove a useless check This patch add net namespace to pktgen, so that we can use pktgen in different namespaces. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03pktgen: clean up ktime_t helpersDaniel Borkmann1-28/+13
Some years ago, the ktime_t helper functions ktime_now() and ktime_lt() have been introduced. Instead of defining them inside pktgen.c, they should either use ktime_t library functions or, if not available, they should be defined in ktime.h, so that also others can benefit from them. ktime_compare() is introduced with a similar notion as in timespec_compare(). Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21pktgen: Use ipv6_addr_anyJoe Perches1-5/+1
Use the standard test for a non-zero ipv6 address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: replace scan_ip6() with in6_pton()Amerigo Wang1-97/+4
Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: enable automatic IPv6 address settingAmerigo Wang1-13/+5
Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: display IPv4 address in human-readable formatAmerigo Wang1-2/+2
It is weird to display IPv4 address in %x format, what's more, IPv6 address is disaplayed in human-readable format too. So, make it human-readable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: set different default min_pkt_size for different protocolsAmerigo Wang1-7/+20
ETH_ZLEN is too small for IPv6, so this default value is not suitable. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10pktgen: fix crash when generating IPv6 packetsAmerigo Wang1-1/+1
For IPv6, sizeof(struct ipv6hdr) = 40, thus the following expression will result negative: datalen = pkt_dev->cur_pkt_size - 14 - sizeof(struct ipv6hdr) - sizeof(struct udphdr) - pkt_dev->pkt_overhead; And, the check "if (datalen < sizeof(struct pktgen_hdr))" will be passed as "datalen" is promoted to unsigned, therefore will cause a crash later. This is a quick fix by checking if "datalen" is negative. The following patch will increase the default value of 'min_pkt_size' for IPv6. This bug should exist for a long time, so Cc -stable too. Cc: <stable@vger.kernel.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13pktgen: fix crash with vlan and packet size less than 46Nishank Trivedi1-1/+1
If vlan option is being specified in the pktgen and packet size being requested is less than 46 bytes, despite being illogical request, pktgen should not crash the kernel. BUG: unable to handle kernel paging request at ffff88021fb82000 Process kpktgend_0 (pid: 1184, threadinfo ffff880215f1a000, task ffff880218544530) Call Trace: [<ffffffffa0637cd2>] ? pktgen_finalize_skb+0x222/0x300 [pktgen] [<ffffffff814f0084>] ? build_skb+0x34/0x1c0 [<ffffffffa0639b11>] pktgen_thread_worker+0x5d1/0x1790 [pktgen] [<ffffffffa03ffb10>] ? igb_xmit_frame_ring+0xa30/0xa30 [igb] [<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40 [<ffffffff8107ba20>] ? wake_up_bit+0x40/0x40 [<ffffffffa0639540>] ? spin+0x240/0x240 [pktgen] [<ffffffff8107b4e3>] kthread+0x93/0xa0 [<ffffffff81615de4>] kernel_thread_helper+0x4/0x10 [<ffffffff8107b450>] ? flush_kthread_worker+0x80/0x80 [<ffffffff81615de0>] ? gs_change+0x13/0x13 The root cause of why pktgen is not able to handle this case is due to comparison of signed (datalen) and unsigned data (sizeof), which eventually passes a huge number to skb_put(). Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
2012-05-18pktgen: fix module unload for goodEric Dumazet1-2/+2
commit c57b5468406 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-17pktgen: Use pr_debugJoe Perches1-23/+18
Convert printk(KERN_DEBUG to pr_debug which can enable dynamic debugging. Remove embedded prefixes from the conversions as pr_fmt adds them. Align arguments. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+8
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches1-4/+3
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10pktgen: fix crash at module unloadEric Dumazet1-2/+8
commit 7d3d43dab4e9 (net: In unregister_netdevice_notifier unregister the netdevices.) makes pktgen crashing at module unload. [ 296.820578] BUG: spinlock bad magic on CPU#6, rmmod/3267 [ 296.820719] lock: ffff880310c38000, .magic: ffff8803, .owner: <none>/-1, .owner_cpu: -1 [ 296.820943] Pid: 3267, comm: rmmod Not tainted 3.4.0-rc5+ #254 [ 296.821079] Call Trace: [ 296.821211] [<ffffffff8168a715>] spin_dump+0x8a/0x8f [ 296.821345] [<ffffffff8168a73b>] spin_bug+0x21/0x26 [ 296.821507] [<ffffffff812b4741>] do_raw_spin_lock+0x131/0x140 [ 296.821648] [<ffffffff8169188e>] _raw_spin_lock+0x1e/0x20 [ 296.821786] [<ffffffffa00cc0fd>] __pktgen_NN_threads+0x4d/0x140 [pktgen] [ 296.821928] [<ffffffffa00ccf8d>] pktgen_device_event+0x10d/0x1e0 [pktgen] [ 296.822073] [<ffffffff8154ed4f>] unregister_netdevice_notifier+0x7f/0x100 [ 296.822216] [<ffffffffa00d2a0b>] pg_cleanup+0x48/0x73 [pktgen] [ 296.822357] [<ffffffff8109528e>] sys_delete_module+0x17e/0x2a0 [ 296.822502] [<ffffffff81699652>] system_call_fastpath+0x16/0x1b Hold the pktgen_thread_lock while splicing pktgen_threads, and test pktgen_exiting in pktgen_device_event() to make unload faster. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet1-10/+10
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22pktgen: Fix unsigned function that is returning negative valsPaul Gortmaker1-2/+2
Every call to num_args() immediately checks the return value for less than zero, as it will return -EFAULT for a failed get_user() call. So it makes no sense for the function to be declared as an unsigned long. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-07pktgen: set correct max and min in pktgen_setup_inject()Dan Carpenter1-2/+2
In 882716604ec "pktgen: fix multiple queue warning" we added special logic to handle the case where ntxq is zero. It's not clear to me that ntxq can actually be zero. But if it were then we would set ->queue_map_min and ->queue_map_max to USHRT_MAX when probably we want to set them to zero? Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net: Add queue state xoff flag for stackTom Herbert1-1/+1
Create separate queue state flags so that either the stack or drivers can turn on XOFF. Added a set of functions used in the stack to determine if a queue is really stopped (either by stack or driver) Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan1-9/+6
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-20pktgen: remove ndelay() callEric Dumazet1-4/+7
Daniel Turull reported inaccuracies in pktgen when using low packet rates, because we call ndelay(val) with values bigger than 20000. Instead of calling ndelay() for delays < 100us, we can instead loop calling ktime_now() only. Reported-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: do not take an additional reference in skb_frag_set_pageIan Campbell1-0/+1
I audited all of the callers in the tree and only one of them (pktgen) expects it to do so. Taking this reference is pretty obviously confusing and error prone. In particular I looked at the following commits which switched callers of (__)skb_frag_set_page to the skb paged fragment api: 6a930b9f163d7e6d9ef692e05616c4ede65038ec cxgb3: convert to SKB paged frag API. 5dc3e196ea21e833128d51eb5b788a070fea1f28 myri10ge: convert to SKB paged frag API. 0e0634d20dd670a89af19af2a686a6cce943ac14 vmxnet3: convert to SKB paged frag API. 86ee8130a46769f73f8f423f99dbf782a09f9233 virtionet: convert to SKB paged frag API. 4a22c4c919c201c2a7f4ee09e672435a3072d875 sfc: convert to SKB paged frag API. 18324d690d6a5028e3c174fc1921447aedead2b8 cassini: convert to SKB paged frag API. b061b39e3ae18ad75466258cf2116e18fa5bbd80 benet: convert to SKB paged frag API. b7b6a688d217936459ff5cf1087b2361db952509 bnx2: convert to SKB paged frag API. 804cf14ea5ceca46554d5801e2817bba8116b7e5 net: xfrm: convert to SKB frag APIs ea2ab69379a941c6f8884e290fdd28c93936a778 net: convert core to skb paged frag APIs Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet1-6/+6
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24net: convert core to skb paged frag APIsIan Campbell1-2/+1
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27net: add IFF_SKB_TX_SHARED flag to priv_flagsNeil Horman1-3/+5
Pktgen attempts to transmit shared skbs to net devices, which can't be used by some drivers as they keep state information in skbs. This patch adds a flag marking drivers as being able to handle shared skbs in their tx path. Drivers are defaulted to being unable to do so, but calling ether_setup enables this flag, as 90% of the drivers calling ether_setup touch real hardware and can handle shared skbs. A subsequent patch will audit drivers to ensure that the flag is set properly Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Jiri Pirko <jpirko@redhat.com> CC: Robert Olsson <robert.olsson@its.uu.se> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22pktgen: refactor pg_init() codeWANG Cong1-7/+12
This also shrinks the object size a little. text data bss dec hex filename 28834 186 8 29028 7164 net/core/pktgen.o 28816 186 8 29010 7152 net/core/pktgen.o.AFTER Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: "David Miller" <davem@davemloft.net>, Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22pktgen: use vzalloc_node() instead of vmalloc_node() + memset()WANG Cong1-2/+1
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-169/+30
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-20sanitize <linux/prefetch.h> usageLinus Torvalds1-0/+1
Commit e66eed651fd1 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h, which uncovered several cases that had apparently relied on that rather obscure header file dependency. So this fixes things up a bit, using grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]') grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]') to guide us in finding files that either need <linux/prefetch.h> inclusion, or have it despite not needing it. There are more of them around (mostly network drivers), but this gets many core ones. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-09net: add mac_pton() for parsing MAC addressAlexey Dobriyan1-45/+8
mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form. mac_pton() doesn't dirty result until it's sure string representation is valid. mac_pton() doesn't care about characters _after_ last octet, it's up to caller to deal with it. mac_pton() diverges from 0/-E return value convention. Target usage: if (!mac_pton(str, whatever->mac)) return -EINVAL; /* ->mac being u8 [ETH_ALEN] is filled at this point. */ /* optionally check str[3 * ETH_ALEN - 1] for termination */ Use mac_pton() in pktgen and netconsole for start. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08pktgen: use %pI6c for printing IPv6 addressesAlexey Dobriyan1-96/+13
I don't know why %pI6 doesn't compress, but the format specifier is kernel-standard, so use it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29pktgen: create num frags requestedamit salecha1-26/+9
Pktgen doesn't generate number of frags requested. Divide packet size by number of frags and fill that in every frags. Example: With packet size 1470, it generate only 11 frags. Initial frags get lenght 706, 353, 177....so on. Last frag get divided by 2. Now with this fix, each frags will get 78 bytes. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17pktgen: Fix set-but-unused variable.David S. Miller1-2/+0
"iph" in pktgen_output_ipsec() is set but never actually used. Kill it off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-22kthread: use kthread_create_on_node()Eric Dumazet1-1/+4
ksoftirqd, kworker, migration, and pktgend kthreads can be created with kthread_create_on_node(), to get proper NUMA affinities for their stack and task_struct. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <tj@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-14pktgen: bug fix in transmission headers with frags=0Daniel Turull1-2/+1
(bug introduced by commit 26ad787962ef84677a48c560 (pktgen: speedup fragmented skbs) The headers of pktgen were incorrectly added in a pktgen packet without frags (frags=0). There was an offset in the pktgen headers. The cause was in reusing the pgh variable as a return variable in skb_put when adding the payload to the skb. Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-03-10Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
2011-03-09pktgen: fix errata in show resultsDaniel Turull1-1/+1
The units in show_results in pktgen were not correct. The results are in usec but it was displayed nsec. Reported-by: Jong-won Lee <ljw@handong.edu> Signed-off-by: Daniel Turull <daniel.turull@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25pktgen: speedup fragmented skbsEric Dumazet1-141/+93
We spend lot of time clearing pages in pktgen. (Or not clearing them on ipv6 and leaking kernel memory) Since we dont modify them, we can use one zeroed page, and get references on it. This page can use NUMA affinity as well. Define pktgen_finalize_skb() helper, used both in ipv4 and ipv6 Results using skbs with one frag : Before patch : Result: OK: 608980458(c608978520+d1938) nsec, 1000000000 (100byte,1frags) 1642088pps 1313Mb/sec (1313670400bps) errors: 0 After patch : Result: OK: 345285014(c345283891+d1123) nsec, 1000000000 (100byte,1frags) 2896158pps 2316Mb/sec (2316926400bps) errors: 0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20pktgen: Remove unnecessary prefix from pr_<level>Joe Perches1-2/+1
Remove "pktgen: " prefix string from one pr_info. pr_fmt adds it, so this is a duplicate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10pktgen: adding prefetchw() callJunchang Wang1-0/+2
We know for sure pktgen is going to write skb->data right after *_alloc_skb, causing unnecessary cache misses. Idea is to add a prefetchw() call to prefetch the first cache line indicated by skb->data. On systems with Adjacent Cache Line Prefetch, it's probably two cache lines are prefetched. With this patch, pktgen on Intel SR1625 server with two E5530 quad-core processors and a single ixgbe-based NIC went from 8.63Mpps to 9.03Mpps, with 4.6% improvement. Signed-off-by: Junchang Wang <junchangwang@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28net: add netif_tx_queue_frozen_or_stoppedEric Dumazet1-1/+1
When testing struct netdev_queue state against FROZEN bit, we also test XOFF bit. We can test both bits at once and save some cycles. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21pktgen: allow faster module unloadEric Dumazet1-5/+12
Unloading pktgen module needs ~6 seconds on a 64 cpus machine, to stop 64 kthreads. Add a pktgen_exiting variable to let kernel threads die faster, so that kthread_stop() doesnt have to wait too long for them. This variable is not tested in fast path. Note : Before exiting from pktgen_thread_worker(), we must make sure kthread_stop() is waiting for this thread to be stopped, like its done in kernel/softirq.c Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 05:20:49 +0000