summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)AuthorFilesLines
2014-09-12GFS2: fix d_splice_alias() misusesAl Viro1-2/+3
Callers of d_splice_alias(dentry, inode) don't need iput(), neither on success nor on failure. Either the reference to inode is stored in a previously negative dentry, or it's dropped. In either case inode reference the caller used to hold is consumed. __gfs2_lookup() does iput() in case when d_splice_alias() has failed. Double iput() if we ever hit that. And gfs2_create_inode() ends up not only with double iput(), but with link count dropped to zero - on an inode it has just found in directory. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-11GFS2: Don't use MAXQUOTAS valueJan Kara1-2/+5
MAXQUOTAS value defines maximum number of quota types VFS supports. This isn't necessarily the number of types gfs2 supports and with addition of project quotas these two numbers stop matching. So make gfs2 use its private definition. CC: cluster-devel@redhat.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-11GFS2: Hash the negative dentry during inode lookupBenjamin Coddington1-1/+3
Fix a regression introduced by: 6d4ade986f9c8df31e68 GFS2: Add atomic_open support where an early return misses d_splice_alias() which had been adding the negative dentry. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-08-21GFS2: Request demote when a "try" flock failsBob Peterson1-3/+12
This patch changes the flock code so that it uses the TRY_1CB flag instead of the TRY flag on the first attempt. That forces any holding nodes to issue a dlm callback, which requests a demote of the glock. Then, if the "try" failed, it sleeps a small amount of time for the demote to occur. Then it tries again, for an increasing amount of time. Subsequent attempts to gain the "try" lock don't use "_1CB" so that only one callback is issued. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-08-21GFS2: Change maxlen variables to size_tBob Peterson1-4/+5
This patch changes some variables (especially maxlen in function gfs2_block_map) from unsigned int to size_t. We need 64-bit arithmetic for very large files (e.g. 1PB) where the variables otherwise get shifted to all 0's. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-08-21GFS2: fs/gfs2/super.c: replace seq_printf by seq_putsFabian Frederick1-10/+10
fix checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf" Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-28Merge branch 'sched/urgent' into sched/core, to merge fixes before applying ↵Ingo Molnar5-13/+17
new changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-18GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixesFabian Frederick1-2/+2
Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: memcontrol: Spelling s/invlidate/invalidate/Geert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: cluster-devel@redhat.com Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Allow caching of glocks for flockBob Peterson1-1/+1
This patch removes the GLF_NOCACHE flag from the glocks associated with flocks. There should be no good reason not to cache glocks for flocks: they only force the glock to be demoted before they can be reacquired, which can slow down performance and even cause glock hangs, especially in cases where the flocks are held in Shared (SH) mode. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Allow flocks to use normal glock dq rather than dq_waitBob Peterson2-4/+2
This patch allows flock glocks to use a non-blocking dequeue rather than dq_wait. It also reverts the previous patch I had posted regarding dq_wait. The reverted patch isn't necessarily a bad idea, but I decided this might avoid unforeseen side effects, and was therefore safer. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: replace count*size kzalloc by kcallocFabian Frederick1-2/+2
kcalloc manages count*sizeof overflow. Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Use GFP_NOFS when allocating glocksSteven Whitehouse1-2/+2
Normally GFP_KERNEL is ok here, but there is now a rarely used code path relating to deallocation of unlinked inodes (in certain corner cases) which if hit at times of memory shortage can cause recursion while trying to free memory. One solution would be to try and move the gfs2_glock_get() call so that it is no longer called while another glock is held, but that doesn't look at all easy, so GFP_NOFS is the best solution for the time being. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Fix race in glock lru glock disposalSteven Whitehouse1-3/+7
We must not leave items on the LRU list with GLF_LOCK set, since they can be removed if the glock is brought back into use, which may then potentially result in a hang, waiting for GLF_LOCK to clear. It doesn't happen very often, since it requires a glock that has not been used for a long time to be brought back into use at the same moment that the shrinker is part way through disposing of glocks. The fix is to set GLF_LOCK at a later time, when we already know that the other locks can be obtained. Also, we now only release the lru_lock in case a resched is needed, rather than on every iteration. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Only wait for demote when last holder is dequeuedBob Peterson1-1/+3
Function gfs2_glock_dq_wait is supposed to dequeue a glock and then wait for the lock to be demoted. The problem is, if this is a shared lock, its demote will depend on the other holders, which means you might end up waiting forever because the other process is blocked. This problem is especially apparent when dealing with nested flocks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-16sched: Remove proliferation of wait_on_bit() action functionsNeilBrown5-53/+7
The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-12Merge branch 'for-linus' of ↵Linus Torvalds2-22/+19
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "This the bunch that sat in -next + lock_parent() fix. This is the minimal set; there's more pending stuff. In particular, I really hope to get acct.c fixes merged this cycle - we need that to deal sanely with delayed-mntput stuff. In the next pile, hopefully - that series is fairly short and localized (kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more iov_iter work. Most of prereqs for ->splice_write with sane locking order are there and Kent's dio rewrite would also fit nicely on top of this pile" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits) lock_parent: don't step on stale ->d_parent of all-but-freed one kill generic_file_splice_write() ceph: switch to iter_file_splice_write() shmem: switch to iter_file_splice_write() nfs: switch to iter_splice_write_file() fs/splice.c: remove unneeded exports ocfs2: switch to iter_file_splice_write() ->splice_write() via ->write_iter() bio_vec-backed iov_iter optimize copy_page_{to,from}_iter() bury generic_file_aio_{read,write} lustre: get rid of messing with iovecs ceph: switch to ->write_iter() ceph_sync_direct_write: stop poking into iov_iter guts ceph_sync_read: stop poking into iov_iter guts new helper: copy_page_from_iter() fuse: switch to ->write_iter() btrfs: switch to ->write_iter() ocfs2: switch to ->write_iter() xfs: switch to ->write_iter() ...
2014-06-12->splice_write() via ->write_iter()Al Viro1-2/+2
iter_file_splice_write() - a ->splice_write() instance that gathers the pipe buffers, builds a bio_vec-based iov_iter covering those and feeds it to ->write_iter(). A bunch of simple cases coverted to that... [AV: fixed the braino spotted by Cyrill] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-04mm: non-atomically mark page accessed during page cache allocation where ↵Mel Gorman2-3/+2
possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04Merge tag 'gfs2-merge-window' of ↵Linus Torvalds17-162/+245
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next Pull gfs2 updates from Steven Whitehouse: "This must be about the smallest merge window patch set ever for GFS2. It is probably also the first one without a single patch from me. That is down to a combination of factors, and I have some things in the works that are not quite ready yet, that I hope to put in next time around. Returning to what is here this time... we have 3 patches which fix various warnings. Two are bug fixes (for quotas and also a rare recovery race condition). The final patch, from Ben Marzinski, is an important change in the freeze code which has been in progress for some time. This removes the need to take and drop the transaction lock for every single transaction, when the only time it was used, was at file system freeze time. Ben's patch integrates the freeze operation into the journal flush code as an alternative with lower overheads and also lands up resolving some difficult to fix races at the same time" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: GFS2: Prevent recovery before the local journal is set GFS2: fs/gfs2/file.c: kernel-doc warning fixes GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes GFS2: remove transaction glock GFS2: lops.c: replace 0 by NULL for pointers GFS2: quotas not being refreshed in gfs2_adjust_quota
2014-06-02GFS2: Prevent recovery before the local journal is setBob Peterson3-0/+8
This patch uses a completion to prevent dlm's recovery process from referencing and trying to recover a journal before a journal has been opened. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-16GFS2: fs/gfs2/file.c: kernel-doc warning fixesFabian Frederick1-5/+5
Related function is not gfs2_set_flags but do_gfs2_set_flags Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-16GFS2: fs/gfs2/bmap.c: kernel-doc warning fixesFabian Frederick1-4/+4
Fix 2 typos and move one definition which was between function comments and function definition (yet another kernel-doc warning) Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-14GFS2: remove transaction glockBenjamin Marzinski15-152/+226
GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-06gfs2: switch to ->write_iter()Al Viro1-10/+8
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch simple generic_file_aio_read() users to ->read_iter()Al Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06switch {__,}blockdev_direct_IO() to iov_iterAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06get rid of pointless iov_length() in ->direct_IO()Al Viro1-1/+1
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06pass iov_iter to ->direct_IO()Al Viro1-6/+5
unmodified, for now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-28GFS2: lops.c: replace 0 by NULL for pointersFabian Frederick1-1/+1
Sparse warning: fs/gfs2/lops.c:78:29: "warning: Using plain integer as NULL pointer" Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra5-10/+10
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17GFS2: quotas not being refreshed in gfs2_adjust_quotaAbhi Das1-0/+1
Old values of user quota limits were being used and could allow users to exceed their allotted quotas. This patch refreshes the limits to the latest values so that quotas are enforced correctly. Resolves: rhbz#1077463 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-04-07mm: implement ->map_pages for page cacheKirill A. Shutemov1-0/+1
filemap_map_pages() is generic implementation of ->map_pages() for filesystems who uses page cache. It should be safe to use filemap_map_pages() for ->map_pages() if filesystem use filemap_fault() for ->fault(). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Major changes for 3.14 include support for the newly added ZERO_RANGE and COLLAPSE_RANGE fallocate operations, and scalability improvements in the jbd2 layer and in xattr handling when the extended attributes spill over into an external block. Other than that, the usual clean ups and minor bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits) ext4: fix premature freeing of partial clusters split across leaf blocks ext4: remove unneeded test of ret variable ext4: fix comment typo ext4: make ext4_block_zero_page_range static ext4: atomically set inode->i_flags in ext4_set_inode_flags() ext4: optimize Hurd tests when reading/writing inodes ext4: kill i_version support for Hurd-castrated file systems ext4: each filesystem creates and uses its own mb_cache fs/mbcache.c: doucple the locking of local from global data fs/mbcache.c: change block and index hash chain to hlist_bl_node ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate ext4: refactor ext4_fallocate code ext4: Update inode i_size after the preallocation ext4: fix partial cluster handling for bigalloc file systems ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents ext4: only call sync_filesystm() when remounting read-only fs: push sync_filesystem() down to the file system's remount_fs() jbd2: improve error messages for inconsistent journal heads jbd2: minimize region locked by j_list_lock in jbd2_journal_forget() jbd2: minimize region locked by j_list_lock in journal_get_create_access() ...
2014-04-04Merge tag 'gfs2-merge-window' of ↵Linus Torvalds28-437/+604
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw Pull GFS2 updates from Steven Whitehouse: "One of the main highlights this time, is not the patches themselves but instead the widening contributor base. It is good to see that interest is increasing in GFS2, and I'd like to thank all the contributors to this patch set. In addition to the usual set of bug fixes and clean ups, there are patches to improve inode creation performance when xattrs are required and some improvements to the transaction code which is intended to help improve scalability after further changes in due course. Journal extent mapping is also updated to make it more efficient and again, this is a foundation for future work in this area. The maximum number of ACLs has been increased to 300 (for a 4k block size) which means that even with a few additional xattrs from selinux, everything should fit within a single fs block. There is also a patch to bring GFS2's own copy of the writepages code up to the same level as the core VFS. Eventually we may be able to merge some of this code, since it is fairly similar. The other major change this time, is bringing consistency to the printing of messages via fs_<level>, pr_<level> macros" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits) GFS2: Fix address space from page function GFS2: Fix uninitialized VFS inode in gfs2_create_inode GFS2: Fix return value in slot_get() GFS2: inline function gfs2_set_mode GFS2: Remove extraneous function gfs2_security_init GFS2: Increase the max number of ACLs GFS2: Re-add a call to log_flush_wait when flushing the journal GFS2: Ensure workqueue is scheduled after noexp request GFS2: check NULL return value in gfs2_ok_to_move GFS2: Convert gfs2_lm_withdraw to use fs_err GFS2: Use fs_<level> more often GFS2: Use pr_<level> more consistently GFS2: Move recovery variables to journal structure in memory GFS2: global conversion to pr_foo() GFS2: return -E2BIG if hit the maximum limits of ACLs GFS2: Clean up journal extent mapping GFS2: replace kmalloc - __vmalloc / memset 0 GFS2: Remove extra "if" in gfs2_log_flush() fs: NULL dereference in posix_acl_to_xattr() GFS2: Move log buffer accounting to transaction ...
2014-04-03mm + fs: store shadow entries in page cacheJohannes Weiner1-1/+1
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-31GFS2: Fix address space from page functionSteven Whitehouse3-1/+9
Now that rgrps use the address space which is part of the super block, we need to update gfs2_mapping2sbd() to take account of that. The only way to do that easily is to use a different set of address_space_operations for rgrps. Reported-by: Abhi Das <adas@redhat.com> Tested-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-31GFS2: Fix uninitialized VFS inode in gfs2_create_inodeAbhi Das3-6/+13
When gfs2_create_inode() fails due to quota violation, the VFS inode is not completely uninitialized. This can cause a list corruption error. This patch correctly uninitializes the VFS inode when a quota violation occurs in the gfs2_create_inode codepath. Resolves: rhbz#1059808 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-31GFS2: Fix return value in slot_get()Abhi Das1-0/+1
ENOSPC was being returned in slot_get inspite of successful execution of the function. This patch fixes this return code. Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: inline function gfs2_set_modeBob Peterson1-15/+4
Here is a revised patch based on Steve's feedback: This patch eliminates function gfs2_set_mode which was only called in one place, and always returned 0. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: Remove extraneous function gfs2_security_initBob Peterson1-8/+2
This patch eliminates function gfs2_security_init in favor of just calling security_inode_init_security directly. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-19GFS2: Increase the max number of ACLsBob Peterson2-2/+2
This patch increases the maximum number of ACLs from 25 to 300 for a 4K block size. The value is adjusted accordingly if the block size is smaller. Note that this is an arbitrary limit with a performance tradeoff, and that the physical limit is slightly over 500. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-13fs: push sync_filesystem() down to the file system's remount_fs()Theodore Ts'o1-0/+2
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
2014-03-12GFS2: Re-add a call to log_flush_wait when flushing the journalBob Peterson1-0/+1
Upstream commit 34cc178 changed a line of code from calling function log_flush_commit to calling log_write_header. This had the effect of eliminating a call to function log_flush_wait. That causes the journal to skip over log headers, which results in multiple wrap points, which itself leads to infinite loops in journal replay, both in the kernel code and fsck.gfs2 code. This patch re-adds that call. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-12GFS2: Ensure workqueue is scheduled after noexp requestBob Peterson1-2/+6
This patch closes a small timing window whereby a request to hold the transaction glock can get stuck. The problem is that after the DLM has granted the lock, it can get into a state whereby it doesn't transition the glock to a held state, due to not having requeued the glock state machine to finish the transition. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-12GFS2: check NULL return value in gfs2_ok_to_moveAbhi Das1-0/+4
gfs2_lookupi() can return NULL if the path to the root is broken by another rename/rmdir. In this case gfs2_ok_to_move() must check for this NULL pointer and return error. Resolves: rhbz#1060246 Signed-off-by: Abhi Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Convert gfs2_lm_withdraw to use fs_errJoe Perches3-50/+46
vprintk use is not prefixed by a KERN_<LEVEL>, so emit these messages at KERN_ERR level. Using %pV can save some code and allow fs_err to be used, so do it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Use fs_<level> more oftenJoe Perches3-5/+7
Convert a couple of uses of pr_<level> to fs_<level> Add and use fs_emerg. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Use pr_<level> more consistentlyJoe Perches12-71/+88
Add pr_fmt, remove embedded "GFS2: " prefixes. This now consistently emits lower case "gfs2: " for each message. Other miscellanea around these changes: o Add missing newlines o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07GFS2: Move recovery variables to journal structure in memoryBob Peterson5-43/+39
If multiple nodes fail and their recovery work runs simultaneously, they would use the same unprotected variables in the superblock. For example, they would stomp on each other's revoked blocks lists, which resulted in file system metadata corruption. This patch moves the necessary variables so that each journal has its own separate area for tracking its journal replay. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>