summaryrefslogtreecommitdiff
path: root/drivers/tty/synclinkmp.c
AgeCommit message (Collapse)AuthorFilesLines
2016-05-20Merge tag 'tty-4.7-rc1' of ↵Linus Torvalds1-24/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-2/+2
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley1-8/+8
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_CHECK_CD and update atomicallyPeter Hurley1-6/+2
Replace ASYNC_CHECK_CD bit in the tty_port::flags field with TTY_PORT_CHECK_CD bit in the tty_port::iflags field. Introduce helpers tty_port_set_check_carrier() and tty_port_check_carrier() to abstract the atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_NORMAL_ACTIVE bit and update atomicallyPeter Hurley1-3/+3
Replace ASYNC_NORMAL_ACTIVE bit in the tty_port::flags field with TTY_PORT_ACTIVE bit in the tty_port::iflags field. Introduce helpers tty_port_set_active() and tty_port_active() to abstract atomic bit ops. Extract state changes from port lock sections, as this usage is broken and confused; the state transitions are protected by the tty lock (which mutually excludes parallel open/close/hangup), and no user tests the active state while holding the port lock. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_CTS_FLOW bit and update atomicallyPeter Hurley1-4/+1
Replace ASYNC_CTS_FLOW bit in the tty_port::flags field with TTY_PORT_CTS_FLOW bit in the tty_port::iflags field. Add tty_port_set_cts_flow() helper to abstract the atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley1-1/+1
Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_IO_ERROR bit tests with tty_io_error()Peter Hurley1-2/+2
Abstract TTY_IO_ERROR status test treewide with tty_io_error(). NB: tty->flags uses atomic bit ops; replace non-atomic bit test with test_bit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06tty: synclinkmp: do not ignore errors in probe()Alexey Khoroshilov1-16/+28
synclinkmp_init_one() ignores all errors and does not release all resources if something fails. The patch adds returned code to device_init() and add_device() and proper error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Use termios c_*flag macrosPeter Hurley1-12/+7
Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Remove ASYNC_CLOSING checks in open()/hangup() methodsPeter Hurley1-12/+2
Since at least before 2.6.30, tty drivers that do not drop the tty lock while closing cannot observe ASYNC_CLOSING set while holding the tty lock; this includes the tty driver's open() and hangup() methods, since the tty core calls these methods holding the tty lock. For these drivers, waiting for ASYNC_CLOSING to clear while opening is not required, since this condition cannot occur. Similarly, even when the open() method drops and reacquires the tty lock after blocking, ASYNC_CLOSING cannot be set (again, for drivers that do not drop the tty lock while closing). Now that tty port drivers no longer drop the tty lock while closing (since 'tty: Remove tty_wait_until_sent_from_close()'), the same conditions apply: waiting for ASYNC_CLOSING to clear while opening is not required, nor is re-checking ASYNC_CLOSING after dropping and reacquiring the tty lock while blocking (eg., in *_block_til_ready()). Note: The ASYNC_CLOSING flag state is still maintained since several bitrotting drivers use it for (dubious) other purposes. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10tty: synclinkmp.c: move assignment out of if () blockGreg Kroah-Hartman1-4/+8
We should not be doing assignments within an if () block so fix up the code to not do this. change was created using Coccinelle. CC: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10tty: Remove tty_hung_up_p() tests from tty drivers' open()Peter Hurley1-8/+3
Since at least before 2.6.30, it has not been possible to observe a hung up file pointer in a tty driver's open() method unless/until the driver open() releases the tty_lock() (eg., before blocking). This is because tty_open() adds the file pointer while holding the tty_lock() _and_ doesn't release the lock until after calling the tty driver's open() method. [ Before tty_lock(), this was lock_kernel(). ] Since __tty_hangup() first waits on the tty_lock() before enumerating and hanging up the open file pointers, either __tty_hangup() will wait for the tty_lock() or tty_open() will not yet have added the file pointer. For example, CPU 0 | CPU 1 | tty_open | __tty_hangup .. | .. tty_lock | .. tty_reopen | tty_lock / blocks .. | tty_add_file(tty, filp) | .. | tty->ops->open(tty, filp) | tty_port_open | tty_port_block_til_ready | .. | while (1) | .. | tty_unlock | / unblocks schedule | for each filp on tty->tty_files | f_ops = tty_hung_up_fops; | .. | tty_unlock tty_lock | .. | tty_unlock | Note that since tty_port_block_til_ready() and similar drop the tty_lock while blocking, when woken, the file pointer must then be tested for having been hung up. Also, fix bit-rotted drivers that used extra_count to track the port->count bump. CC: Mikael Starvik <starvik@axis.com> CC: Samuel Ortiz <samuel@sortiz.org> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17synclink: fix info leak in ioctlSalva Peiró1-0/+1
The hdlcdev_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty: synclink: avoid sleep_on raceArnd Bergmann1-2/+2
The four variants of the synclink driver use the same code in their open() callback to wait for a port in process of being closed, using interruptible_sleep_on, which is racy and going away soon. Making things worse, these functions hold the BTM while doing so, which means that if we ever enter this code path, we cannot actually continue since the other thread that is in process of closing the port can no longer get the BTM. This addresses both issues by using wait_event_interruptible_tty() instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24TTY: snyclinkmp: calculating wrong addressesDan Carpenter1-1/+1
This is a static checker fix and I don't have a way to test it. But from the context it looks like this is a typo where SCABUFSIZE was intended instead of sizeof(SCABUFSIZE). SCABUFSIZE is 1024 and sizeof(int) is 4. I would suspect this is a bad bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12TTY: synclinkmp: fix DTR being raised on hang upJohan Hovold1-1/+1
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-30TTY: synclink: Convert + to | for bit operationsJoe Perches1-20/+20
Dan Carpenter noticed a missing set of parentheses around a multiple field addition. https://lkml.org/lkml/2013/1/27/166 His original commit message: There is a kind of precedence problem here, but it doesn't affect how the code works because ->serial_signals is unsigned char. We want to clear two flags here. #define SerialSignal_RTS 0x20 /* Request to Send */ #define SerialSignal_DTR 0x80 /* Data Terminal Ready */ Without the parenthesis then it does: info->serial_signals &= 0x5f; With the parenthesis it does: info->serial_signals &= 0xffffff5f; info->serial_signals is an unsigned char so the two statements are equivalent, but it's cleaner to add the parenthesis. In other dtr_rts() functions the parenthesis are there so this makes it more consistent. Other changes: Convert all + uses to | for these bit operations. Reorder the multiple fields for consistency. Update the comments too. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: synclink, remove unneeded testsJiri Slaby1-3/+0
info in synclink bottom-halves cannot be NULL because it is taken from work_struct using container_of. Remove the tests. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_flip_buffer_pushJiri Slaby1-3/+1
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: move low_latency to tty_portJiri Slaby1-1/+1
One point is to have less places where we actually need tty pointer. The other is that low_latency is bound to buffer processing and buffers are now in tty_port. So it makes sense to move low_latency to tty_port too. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15TTY: switch tty_insert_flip_charJiri Slaby1-24/+18
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15synclink fix ldisc buffer argumentPaul Fulghum1-2/+10
Fix call to line discipline receive_buf by synclink drivers. Dummy flag buffer argument is ignored by N_HDLC line discipline but might be of insufficient size if accessed by a different line discipline selected by mistake. flag buffer allocation now matches max size of data buffer. Unused char_buf buffers are removed. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21tty: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21tty: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Lucas Tavares <lucaskt@linux.vnet.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Tony Prisk <linux@prisktech.co.nz> Acked-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21tty: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15TTY: call tty_port_destroy in the rest of driversJiri Slaby1-1/+4
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. To be sure, the TTY buffers (and later some stuff) are gone along with the tty_port, we have to call tty_port_destroy at tear-down places. This is mostly where the structure containing a tty_port is freed. This patch does exactly that -- put tty_port_destroy at those places. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05serial: add a new helper functionHuang Shijie1-1/+1
In most of the time, the driver needs to check if the cts flow control is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually, which is not a grace way. So add a new wraper function to make the code tidy and clean. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-13TTY: synclinkmp, add tty installJiri Slaby1-9/+19
This has two outcomes: * we give the TTY layer a tty_port * we do not find the info structure every time open is called on that tty Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10tty: localise the lockAlan Cox1-2/+2
The termios and other changes mean the other protections needed on the driver tty arrays should be adequate. Turn it all back on. This contains pieces folded in from the fixes made to the original patches | From: Geert Uytterhoeven <geert@linux-m68k.org> (fix m68k) | From: Paul Gortmaker <paul.gortmaker@windriver.com> (fix cris) | From: Jiri Kosina <jkosina@suze.cz> (lockdep) | From: Eric Dumazet <eric.dumazet@gmail.com> (lockdep) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16tty: move the termios object into the ttyAlan Cox1-12/+12
This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16tty: revert incorrectly applied lock patchAlan Cox1-2/+2
I sent GregKH this after the pre-requisites. He dropped the pre-requesites for good reason and unfortunately then applied this patch. Without this reverted you get random kernel memory corruption which will make bisecting anything between it and the properly applied patches a complete sod. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-06tty: localise the lockAlan Cox1-2/+2
The termios and other changes mean the other protections needed on the driver tty arrays should be adequate. Turn it all back on. This contains pieces folded in from the fixes made to the original patches | From: Geert Uytterhoeven <geert@linux-m68k.org> (fix m68k) | From: Paul Gortmaker <paul.gortmaker@windriver.com> (fix cris) | From: Jiri Kosina <jkosina@suze.cz> (lockdep) | From: Eric Dumazet <eric.dumazet@gmail.com> (lockdep) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-02tty: Revert the tty locking series, it needs more workLinus Torvalds1-2/+2
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-04tty_lock: Localise the lockAlan Cox1-2/+2
In each remaining case the tty_lock is associated with a specific tty. This means we can now lock on a per tty basis. We do need tty_lock_pair() for the pty case. Uglier but still a step in the right direction. [fixed up calls in 3 missing drivers - gregkh] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-08TTY: remove unneeded tty->index checksJiri Slaby1-1/+1
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby1-1/+0
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-09-29TTY: snyclinkmp: forever loop in tx_load_dma_buffer()Dan Carpenter1-3/+3
My main concern here was the line that said: copy_count = min_t(unsigned short,count,SCABUFSIZE); "count" is an unsigned int here so the cast to unsigned short truncates the upper bits. So if count is 0x10000 then copy_count is 0 and the loop never exits. "count" comes from skb->len in hdlcdev_xmit(). The other min_t() changes are just cleanups. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi1-5/+5
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-02-22tty: move a number of tty drivers from drivers/char/ to drivers/tty/Greg Kroah-Hartman1-0/+5600
As planned by Arnd Bergmann, this moves the following drivers from drivers/char/ to drivers/tty/ as that's where they really belong: amiserial nozomi synclink rocket cyclades moxa mxser isicom bfin_jtag_comm Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 08:47:30 +0000