summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2006-07-09[SCSI] lpfc 8.1.7: Fix txcmplq related panics on heavy IO while downloading ↵James Smart1-7/+17
firmware Fix txcmplq related panics on heavy IO while downloading firmware Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Issue DOWN_LINK prior to INIT_LINK to work around link ↵James Smart1-1/+11
failure issue Issue DOWN_LINK prior to INIT_LINK to work around link failure issue Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fixed infinite retry of REG_LOGIN mailbox failed due to ↵James Smart1-0/+11
MBXERR_RPI_FULL Fixed infinite retry of REG_LOGIN mailbox failed due to MBXERR_RPI_FULL Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fix memory leak and cleanup code related to per ring ↵James Smart3-27/+5
lookup array Fix memory leak and cleanup code related to per ring lookup array. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Standardize the driver on a single define for the maximum ↵James Smart3-7/+8
supported targets Standardize the driver on a single define for the maximum supported targets. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Use mod_timer instead of add_timer in ↵James Smart1-4/+3
lpfc_els_timeout_handler Use mod_timer instead of add_timer in lpfc_els_timeout_handler This patch was formerly posted by Mark Haverkamp. http://marc.theaimsgroup.com/?l=linux-scsi&m=114246089015681&w=2 Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] update additional sense codes and some opcode namesDouglas Gilbert1-38/+88
Following on from my post titled: "additional sense codes need update" see the attachment against lk 2.6.17 . ChangeLog: - update additional sense codes table to agree with SPC-4 revision 5a (14 June 2006) - adjust some of the opcode names Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] scsi_transport_sas: add unindexed portsJames Bottomley1-1/+35
Some SAS HBAs don't want to go to the trouble of tracking port numbers, so they'd simply like to say "add this port and give it a number". This is especially beneficial from the hotplug point of view, since tracking ports and the available number space can be a real pain. The current implementation uses an incrementing number per expander to add the port on. However, since there can never be more ports than there are phys, a later implementation will try to be more intelligent about this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] aic79xx: make ahd_done_with_status() staticAdrian Bunk1-1/+1
This patch makes a needlessly global function static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-05[PATCH] ahci: Ensure that we don't grab both functionsroot1-4/+11
When we force the chip into dual fn mode so we get PATA and AHCI we must be sure we don't then do anything dumb like try and grab both with the AHCI driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata-core.c: restore configuration boot messages in ↵Borislav Petkov1-5/+5
ata_dev_configure(), v2 This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: <petkov@math.uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil24: add suspend/sleep supportTejun Heo1-0/+25
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil24: separate out sil24_init_controller()Tejun Heo1-45/+62
Separate out controller initialization from sil24_init_one() into sil24_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil: add suspend/sleep supportTejun Heo1-0/+17
Add suspend/sleep support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_sil: separate out sil_init_controller()Tejun Heo1-38/+48
Separate out controller initialization from sil_init_one() into sil_init_controller(). This will be used by resume. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: reimplement controller-wide PMTejun Heo2-7/+286
Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: reimplement per-dev PMTejun Heo2-90/+115
Reimplement per-dev PM. The original implementation directly put the device into suspended mode and didn't synchronize w/ EH operations including hotplug. This patch reimplements ata_scsi_device_suspend() and ata_scsi_device_resume() such that they request EH to perform the respective operations. Both functions synchronize with hotplug such that it doesn't operate on detached devices. Suspend waits for completion but resume just issues request and returns. This allows parallel wake up of devices and thus speeds up system resume. Due to sdev detach synchronization, it's not feasible to separate out EH requesting from sdev handling; thus, ata_device_suspend/resume() are removed and everything is implemented in the respective libata-scsi functions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement PM EH actionsTejun Heo2-3/+187
Implement two PM per-dev EH actions - ATA_EH_SUSPEND and ATA_EH_RESUME. Each action puts the target device into suspended mode and resumes from it respectively. Once a device is put to suspended mode, no EH operations other than RESUME is allowed on the device. The device will stay suspended till it gets resumed and thus reset and revalidated. To implement this, a new device state helper - ata_dev_ready() - is implemented and used in EH action implementations to make them operate only on attached & running devices. If all possible devices on a port are suspended, reset is skipped too. This prevents spurious events including hotplug events from disrupting suspended devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement ATA_EHI_NO_AUTOPSY and QUIETTejun Heo2-16/+21
Implement ATA_EHI_NO_AUTOPSY and QUIET. These used to be implied by ATA_PFLAG_LOADING, but new power management and PMP support need to use these separately. e.g. Suspend/resume operations shouldn't print full EH messages and resume shouldn't be recorded as an error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: clean up debounce parameters and improve parameter selectionTejun Heo2-15/+12
The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: implement ATA_EHI_RESUME_LINKTejun Heo2-7/+9
Implement ATA_EHI_RESUME_LINK, which indicates that the link needs to be resumed. This used to be implied by ATA_EHI_HOTPLUGGED. However, hotplug isn't the only event which requires link resume and separating this out allows other places to request link resume. This differentiation also allows better debounce timing selection. This patch converts user scan to use ATA_EHI_RESUME_LINK. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: replace ap_lock w/ ap->lock in ata_scsi_error()Tejun Heo1-12/+11
ap_lock was used because &ap->host_set->lock was too long and used a lot. Now that &ap->host_set->lock is replaced with ap->lock, there's no reason to keep ap_lock. [ed. note: that's not entirely true. ap_lock is a local variable, caching the results of a de-ref. In theory, if the compiler is smart enough, this patch is cosmetic. However, since this is not a fast path (it is the error path), this patch is nonetheless acceptable, even though it _may_ introduce a performance regression.] Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: fix ehc->i.action setting in ata_eh_autopsy()Tejun Heo1-1/+1
ata_eh_autopsy() used to directly assign determined action mask to ehc->i.action thus overriding actions set by some of nested analyze functions. This patch makes ata_eh_autopsy() add action masks just as it's done in other places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: add ap->pflags and move core dynamic flags to itTejun Heo5-40/+40
ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] libata: Conditionally set host->max_cmd_lenBrian King1-6/+15
In preparation for SAS attached SATA devices, which will not have a libata scsi_host, only setup host->max_cmd_len if ap->host exists. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05[PATCH] sata_vsc: data_xfer should use mmioMartin Hicks1-1/+1
Hi, sata_vsc is an MMIO device, and should use the correct data_xfer function. This problem was introduced by: commit a6b2c5d4754dc539a560fdf0d3fb78a14174394a Author: Alan Cox <alan@lxorguk.ukuu.org.uk> Date: Mon May 22 16:59:59 2006 +0100 [PATCH] PATCH: libata. Add ->data_xfer method Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds51-2222/+3157
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (57 commits) [SCSI] fix error handling in scsi_io_completion [SCSI] qla1280: fix section mismatch warnings [SCSI] mptsas: eliminate ghost devices [SCSI] qla2xxx: make some more functions static [SCSI] small whitespace cleanup for qlogic driver [SCSI] mptbase: mpt_interrupt should return IRQ_NONE [SCSI] mptsas: make two functions static [SCSI] sg.c: Fix bad error handling in [SCSI] 53c700: fix breakage caused by the autosense update [SCSI] iscsi: add async notification of session events [SCSI] iscsi: pass target nr to session creation [SCSI] iscsi: break up session creation into two stages [SCSI] iscsi: rm channel usage from iscsi [SCSI] iscsi: fix session refcouting [SCSI] iscsi: convert iscsi_tcp to new set/get param fns [SCSI] iscsi: convert iser to new set/get param fns [SCSI] iscsi: fixup set/get param functions [SCSI] iscsi: add target discvery event to transport class [SCSI] st: remove unused st_buffer.in_use [SCSI] atp870u: reduce huge stack usage ...
2006-07-03[PATCH] lockdep: annotate on-stack completionsIngo Molnar1-1/+1
lockdep needs to have the waitqueue lock initialized for on-stack waitqueues implicitly initialized by DECLARE_COMPLETION(). Annotate on-stack completions accordingly. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03Merge ../scsi-misc-2.6James Bottomley51-2222/+3157
Conflicts: drivers/scsi/nsp32.c drivers/scsi/pcmcia/nsp_cs.c Removal of randomness flag conflicts with SA_ -> IRQF_ global replacement. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-02[PATCH] irq-flags: scsi: Use the new IRQF_ constantsThomas Gleixner84-108/+108
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[SCSI] fix error handling in scsi_io_completionJames Bottomley1-16/+14
There was a logic fault in scsi_io_completion() where zero transfer commands that complete successfully were sent to the block layer as not up to date. This patch removes the if (good_bytes > 0) gate around the successful completion, since zero transfer commands do have good_bytes == 0. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30[SCSI] qla1280: fix section mismatch warningsRandy Dunlap1-1/+1
Fix section mismatch warnings: WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to .init.data: from .text between 'qla1280_get_token' (at offset 0x2a16) and 'qla1280_probe_one' WARNING: drivers/scsi/qla1280.o - Section mismatch: reference to .init.data: from .text between 'qla1280_get_token' (at offset 0x2a3c) and 'qla1280_probe_one' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30[SCSI] qla2xxx: make some more functions staticAdrian Bunk3-10/+7
Make some needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30[SCSI] small whitespace cleanup for qlogic driverJesper Juhl1-2/+2
Add a few spaces to MODULE_PARM_DESC() text for qla2xxx. Without these spaces text runs together when modinfo prints the text. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30[SCSI] sg.c: Fix bad error handling inIshai Rabinovitz1-1/+9
I got a NULL derefrence in cdev_del+1 when called from sg_remove. By looking at the code of sg_add, sg_alloc and sg_remove (all in drivers/scsi/sg.c) I found out that sg_add is calling sg_alloc but if it fails afterwards it does not deallocate the space that was allocated in sg_alloc and the redundant entry has NULL in cdev. When sg_remove is being called, it tries to perform cdev_del to this NULL cdev and fails. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel65-66/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30typo fixes: infomation -> informationAdrian Bunk1-6/+6
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30typo fixes: aquire -> acquireAdrian Bunk1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds1-4/+4
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29[SCSI] 53c700: fix breakage caused by the autosense updateJames Bottomley2-37/+53
A bit of a brown paper bag issue. The previous patch to remove the soon to be ripped out fields that were used in autosense actually broke the driver. This patch fixes it and has been tested (honestly). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: add async notification of session eventsMike Christie1-82/+227
This patch adds or modifies the transport class functions used to notify userspace of session state events. We modify the session addition up event and add a destruction event to notify userspace of session creation, relogin and destruction. And we modify the conn error event to be sent by broadcast since multiple listeners may want to listen for it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: pass target nr to session creationMike Christie2-8/+8
So the drivers do not use the channel numbers, but some do use the target numbers. We were just adding some goofy variable that just increases for the target nr. This is useless for software iscsi because it is always zero. And for qla4xxx the target nr is actually the index of the target/session in its FW or FLASH tables. We needed to expose this to userspace so apps could access those numbers so this patch just adds the target nr to the iscsi session creation functions. This way when qla4xxx's Hw thinks a session is at target nr 4 in its hw, it is exposed as that number in sysfs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: break up session creation into two stagesMike Christie1-29/+68
qla4xxx is initialized in two steps like other HW drivers. It allocates the host, sets up the HW, then adds the host. For iscsi part of HW setup is setting up persistent iscsi sessions. At that time, the interupts are off and the driver is not completely set up so we just want to allocate them. We do not want to add them to sysfs and expose them to userspace because userspace could try to do lots of fun things with them like scanning and at that time the driver is not ready. So this patch breakes up the session creation like other functions that use the driver model in two the alloc and add parts. When the driver is ready, it can then add the sessions and userspace can begin using them. This also fixes a bug in the addition error patch where we forgot to do a get on the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: rm channel usage from iscsiMike Christie2-6/+4
I do not remember what I was thinking when we added the channel as a argument to the session create function. It was probably due to too much cut and paste work from the FC transport class. The channel is meaningless for iscsi drivers so this patch drops its usage everywhere in the iscsi related code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: fix session refcoutingMike Christie2-9/+9
iscsi_tcp and iser cannot be rmmod from the kernel when sessions are running because session removal is driven from userspace. For those modules we get a module reference when a session is created then drop it when the session is removed. For qla4xxx, they can jsut remove the sessions from the pci remove function like normal HW drivers, so this patch moves the module reference from the transport class functions shared by all drivers to the libiscsi functions only used be software iscsi modules. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: convert iscsi_tcp to new set/get param fnsMike Christie1-128/+24
Convert iscsi_tcp to new lib functions. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: fixup set/get param functionsMike Christie2-166/+223
Reduce duplication in the software iscsi_transport modules by adding a libiscsi function to handle the common grunt work. This also has the drivers return specifc -EXXX values for different errors so userspace can finally handle them in a sane way. Also just pass the sysfs buffers to the drivers so HW iscsi can get/set its string values, like targetname, and initiatorname. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: add target discvery event to transport classMike Christie1-0/+18
Patch from david.somayajulu@qlogic.com: Add target discovery event. We may have a setup where the iscsi traffic is on a different netowrk than the other network traffic. In this case we will want to do discovery though the iscsi card. This patch adds a event to the transport class that can be used by hw iscsi cards that support this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] st: remove unused st_buffer.in_useMartin Habets2-2/+0
I noticed that in_use in st_buffer is not used. The patch below against 2.6.17-rc3 removes it, assuming there is no future use for it. It was tested in a sparc SS20 with a DLT4000. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28Merge ../linux-2.6/James Bottomley26-137/+191
Conflicts: drivers/scsi/aacraid/comminit.c Fixed up by removing the now renamed CONFIG_IOMMU option from aacraid Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 00:52:02 +0000