summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/intel_scu_ipc.c
AgeCommit message (Collapse)AuthorFilesLines
2014-01-21ipc: add intel-mid's pci id macrosDavid Cohen1-4/+9
For readability matters, this patch replaces the hardcoded pci ids by human readable macros. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2014-01-21ipc: simplify platform data approachDavid Cohen1-44/+40
This patch removes the unnecessary enum for platform type to handle the array of pdatas. We can set pdata directly to pci_device_id struct instead. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Added support for IPC interrupt modeKuppuswamy Sathyanarayanan1-3/+45
This patch adds support for ipc command interrupt mode. Also added platform data option to select 'irq_mode' irq_mode = 1: configure the driver to receive IOC interrupt for each successful ipc_command. irq_mode = 0: makes driver use polling method to track the command completion status. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Handle error conditions in ipc commandKuppuswamy Sathyanarayanan1-3/+5
Handle error conditions in intel_scu_ipc_command() and pwr_reg_rdwr(). Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Enabled ipc support for additional intel platformsKuppuswamy Sathyanarayanan1-0/+24
Enabled ipc support for penwell, clovertrail & tangier platforms. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-11-20ipc: Added platform data structureKuppuswamy Sathyanarayanan1-8/+29
Since the same ipc driver can be used by many platforms, using macros for defining ipc_base and i2c_base addresses is not a scalable approach. So added a platform data structure to pass this information. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-10-17intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-1/+1
mrst is used as common name to represent all intel_mid type soc's. But moorsetwon is just one of the intel_mid soc. So renamed them to use intel_mid. This patch mainly renames the variables and related functions that uses *mrst* prefix with *intel_mid*. To ensure that there are no functional changes, I have compared the objdump of related files before and after rename and found the only difference is symbol and name changes. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-17intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-1/+1
Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-03-06x86/mid/scu_ipc: Remove Moorestown supportAlan Cox1-186/+22
All the production devices use the PC compatible version of this device so don't use the SCU interfaces or the SCU firmware interfaces. Delete lots of code and conditional paths Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-4bg4fn9na37b350ohhgiy18n@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-21driver-core: remove sysdev.h usage.Kay Sievers1-1/+1
The sysdev.h file should not be needed by any in-kernel code, so remove the .h file from these random files that seem to still want to include it. The sysdev code will be going away soon, so this include needs to be removed no matter what. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "Venkatesh Pallipadi Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2011-10-31x86: fix up files really needing to include module.hPaul Gortmaker1-0/+1
These files aren't just exporting symbols -- they are also defining a MODULE_LICENSE etc. so give them the full module.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-05platform-drivers-x86: intel_scu_ipc: convert to DEFINE_PCI_DEVICE_TABLEAxel Lin1-1/+1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-03-28platform-drivers: x86: fix common misspellingsLucas De Marchi1-1/+1
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2011-01-31intel_scu_ipc: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/platform/x86/intel_scu_ipc.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26intel_scu_ipc: fix signedness bugAxel Lin1-4/+3
busy_loop() returns negative error code, thus change err variable from u32 to int to properly propagate correct error code. Also remove unneeded initialization for err and i variables. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07intel_scu_ipc: Utility driver for intel scu ipcSreedhara DS1-2/+2
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-11-09x86/mrst: Add SFI platform device parsing codeFeng Tang1-0/+5
SFI provides a series of tables. These describe the platform devices present including SPI and I²C devices, as well as various sensors, keypads and other glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c) This patch is a merge of the core elements and relevant fixes from the Intel development code by Feng, Alek, myself into a single coherent patch for upstream submission. It provides the needed infrastructure to register I2C, SPI and platform devices described by the tables, as well as handlers for some of the hardware already supported in kernel. The 0.8 firmware also provides GPIO tables. Devices are created at boot time or if they are SCU dependant at the point an SCU is discovered. The existing Linux device mechanisms will then handle the device binding. At an abstract level this is an SFI to Linux device translator. Device/platform specific setup/glue is in this file. This is done so that the drivers for the generic I²C and SPI bus devices remain cross platform as they should. (Updated from RFC version to correct the emc1403 name used by the firmware and a wrongly used #define) Signed-off-by: Alek Du <alek.du@linux.intel.com> LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain> [Clean ups, removal of 0.7 support] Signed-off-by: Feng Tang <feng.tang@linux.intel.com> [Clean ups] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-21scu_ipc: Fix warning caused by include changesAlan Cox1-0/+1
We need to include the SFI headers. This is fine as the SCU is only relevant to x86 platforms with SFI. Fixes the -next warning report. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-24intel_scu_ipc: fix IPC i2c write bugJianwei Yang1-1/+1
We should pass the data to the data register. Signed-off-by: Jianwei Yang <jianwei.yang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-03intel_scu_ipc: fix size field for intel_scu_ipc_commandHong Liu1-1/+1
Size for PMIC read/write command is byte, while it is DWORD for other IPC commands. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: ALan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: return -EIO for error condition in busy_loopHong Liu1-1/+4
Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: fix data packing of PMIC command on MoorestownHong Liu1-5/+6
Data is 2-byte per entry for PMIC read-modify-update command. Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03Clean up command packing on MRST.Andy Ross1-18/+11
Don't pass more bytes in the command length field than we filled. Signed-off-by: Andy Ross <andy.ross@windriver.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03zero the stack buffer before giving random garbage to the SCUArjan van de Ven1-0/+2
some messages take 4 bytes, but only fill 3 bytes.... this patch makes sure that whatever we send to the SCU is zeroed first Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03Fix stack buffer size for IPC writev messagesArjan van de Ven1-2/+2
The stack buffer for IPC messages was 16 bytes, limiting messages to a size of 4 (each message is 32 bit). However, the touch screen driver is trying to send messages of size 5.... (AC: Set to 20 bytes having checked the max size allowed) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: Use the new cpu identification functionAlan Cox1-12/+5
This provides an architecture level board identify function to replace the cpuid direct usage Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: tidy up unused bitsSreedhara DS1-4/+0
Delete unused constants IPC_CMD_INDIRECT_RD and IPC_CMD_INDIRECT_WR Remove multiple inclusion of header file "asm/mrst.h" Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03Remove indirect read write api support.Sreedhara DS1-82/+0
The firmware of production devices does not support this interface so this is dead code. Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: Support Medfield processorsSreedhara DS1-20/+33
Changes to work on bothMmoorestown and Medfield New pci id added for Medfield Return type of ipc_data_readl chnaged from u8 to u32 Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03intel_scu_ipc: detect CPU type automaticallySreedhara DS1-7/+12
Intel SCU message formats depend upon the processor type. Replace the module option with automatic detection of the processor type. Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-07-19intel_scu_ipc: Oops/crash fixesSreedhara DS1-4/+8
- fix reversing of command/sub arguments - fix a crash if the i2c interface is called before the device is found Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-01intel_scu_ipc: Length fixAlan Cox1-1/+1
Commands with data must set the length in the message. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-17IPC driver for Intel Mobile Internet Device (MID) platformsSreedhara DS1-0/+829
The IPC (inter processor communications) is used to provide the communications between kernel and system control units on some embedded Intel x86 platforms. (Various bits of clean up and restructuring by Alan Cox) Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com>