summaryrefslogtreecommitdiff
path: root/drivers/dma/at_hdmac.c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-05dmaengine: at_hdmac: prepare clk before calling enableBoris BREZILLON1-6/+9
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: remove return code checking in at_dma_resume_noirq()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine/trivial: at_hdmac: add curly brackets to if/else expressionsNicolas Ferre1-2/+4
Correct coding style following the patch: 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()Nicolas Ferre1-31/+0
Since patch 7c407d3e54dcc0c79119553c8d5ef176c1d5bc3a (DMA: AT91: Get residual bytes in dma buffer), the function atc_cleanup_descriptors() is not used anymore. We remove it to prevent warnings. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-07-05dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT bindingLudovic Desroches1-4/+21
For most devices the FIFO configuration is the same i.e. when half FIFO size is available/filled, a source/destination request is serviced. But USART devices have to do it when there is enough space/data available to perform a single AHB access so the ASAP configuration. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-07-05dma: at_hdmac: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get residual bytes in dma bufferElen Song1-18/+112
Add support for returning the residue for current transfer cookie by reading the transfered buffer size(BTSIZE) in CTRLA register. For a single buffer cookie, the descriptor length minus BTSIZE can get the residue. For a lli cookie, remain_desc will record remain descriptor length when last descriptor finish, the remain_desc minus BTSIZE can get the current residue. If the cookie has completed successfully, the residue will be zero. If the cookie is in progress, it will be the number of bytes yet to be transferred. If get residue error, the cookie will be turn into error status. Check dma fifo to see if data remain, let issue pending finish remain work if there is. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get transfer widthElen Song1-0/+3
In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width, tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: rearrange CFG register bits assignmentNicolas Ferre1-5/+4
No modification in CFG register configuration, just rearrange bits directives to group logically and make it more readable. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac: extend hardware handshaking interface identificationNicolas Ferre1-0/+2
Peripheral handshaking identification numbers can be bigger than 15, so new fields have been created in the CFG register. Add macros to take this modification into account and use them in at_dma_xlate() function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dmaengine: at_hdmac/trivial: correct typo in commentNicolas Ferre1-1/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-09Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-8/+89
Pull slave-dmaengine updates from Vinod Koul: "This time we have dmatest improvements from Andy along with dw_dmac fixes. He has also done support for acpi for dmanegine. Also we have bunch of fixes going in DT support for dmanegine for various folks. Then Haswell and other ioat changes from Dave and SUDMAC support from Shimoda." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) dma: tegra: implement suspend/resume callbacks dma:of: Use a mutex to protect the of_dma_list dma: of: Fix of_node reference leak dmaengine: sirf: move driver init from module_init to subsys_initcall sudmac: add support for SUDMAC dma: sh: add Kconfig at_hdmac: move to generic DMA binding ioatdma: ioat3_alloc_sed can be static ioatdma: Adding write back descriptor error status support for ioatdma 3.3 ioatdma: S1200 platforms ioatdma channel 2 and 3 falsely advertise RAID cap ioatdma: Adding support for 16 src PQ ops and super extended descriptors ioatdma: Removing hw bug workaround for CB3.x .2 and earlier dw_dmac: add ACPI support dmaengine: call acpi_dma_request_slave_channel as well dma: acpi-dma: introduce ACPI DMA helpers dma: of: Remove unnecessary list_empty check DMA: OF: Check properties value before running be32_to_cpup() on it DMA: of: Constant names ioatdma: skip silicon bug workaround for pq_align for cb3.3 ioatdma: Removing PQ val disable for cb3.3 ...
2013-04-30at_hdmac: move to generic DMA bindingLudovic Desroches1-6/+87
Update at_hdmac driver to support generic DMA device tree binding. Devices can still request channel with dma_request_channel() then it doesn't break DMA for non DT boards. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-18dmaengine: at_hdmac: fix race condition in atc_advance_work()Ludovic Desroches1-5/+4
The BUG_ON() directive is triggered probably due to a latency modification following inclusion of commit c10d73671ad3 ("softirq: reduce latencies"). This condition has not been met before 3.9-rc1 and doesn't trigger without this patch. We now make sure that DMA channel is idle before calling atc_complete_all() which makes the BUG_ON() "protection" useless. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-15dma: Remove erroneous __exit and __exit_p() referencesMaxin B. John1-2/+2
Removing the annotation with __exit and referencing with __exit_p() present in dma driver module remove hooks. Part of the __devexit and __devexit_p() purge. Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-12dma: at_hdmac: check direction properly for cyclic transfersAndy Shevchenko1-5/+5
dma_transfer_direction is a normal enum. It means we can't usually use the values as bit fields. Let's adjust this check and move it above the usage of the direction parameter, due to the nature of the following usage of it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi1-1/+2
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14dmaengine: at_hdmac: check that each sg data length is non-nullNicolas Ferre1-0/+11
Avoid the construction of a malformed DMA request sent to the DMA controller. Log message is for debug only because this condition is unlikely to append and may only trigger at driver development time. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [2.6.31+] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()Nicolas Ferre1-1/+1
s/dma_memcpy/slave_sg/ and it is sg length that we are talking about. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Stable <stable@vger.kernel.org> [2.6.31+] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-01dma: fix commentsMasanari Iida1-4/+4
Correct spelling typo in drivers/dma. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-16dmaengine: at_hdmac: add a few const qualifiersUwe Kleine-König1-2/+2
This prepares of_device_id.data becoming const. Without this change the following warning would occur: drivers/dma/at_hdmac.c: In function 'at_dma_get_driver_data': drivers/dma/at_hdmac.c:1228: warning: return discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-12dmaengine: at_hdmac: trivial: fix comment in headerNicolas Ferre1-4/+3
Not all Atmel SoCs were pointed out in header comment which was bringing confusion. Remove the truncated list of supported devices, replace by the only one that is not supported. Reported-by: Elen Song <elen.song@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre1-3/+4
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constantNicolas Ferre1-7/+5
Not needed constant that was set to 0. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-15dmaengine: fix cyclic dma usageVinod Koul1-1/+3
for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of cyclic dma which do so Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi>
2012-04-20dmaengine: at_hdmac: remove clear-on-read in atc_dostart()Nicolas Ferre1-4/+0
This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dmaengine: at_hdmac: add slave config operationNicolas Ferre1-13/+43
This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver. It is needed to fix a regression in the use of atmel-mci.c driver on Atmel AT91 platforms brouth by e2b35f3: "dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes" We remove some parts of the private structure "at_dma_slave" and use the information provided by "struct dma_slave_config": source/destination peripheral registers and access width. AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we now use the standard ones. Although some conversion functions are needed to match register expected values. Some AT91 sub-architecture specific files are slightly touched by this patch but it cannot be split because it can break compilation. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclicAlexandre Bounine1-2/+5
Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to allow passing client/target specific information associated with the data transfer. Modify all affected DMA engine drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate initialization of cookiesRussell King - ARM Linux1-2/+2
Provide a common function to initialize a channels cookie values. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate tx_status functionsRussell King - ARM Linux1-12/+6
Now that we have the completed cookie in the dma_chan structure, we can consolidate the tx_status functions by providing a function to set the txstate structure and returning the DMA status. We also provide a separate helper to set the residue for cookies which are still in progress. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: provide a common function for completing a dma descriptorRussell King - ARM Linux1-1/+1
Provide a common function to do the cookie mechanics for completing a DMA descriptor. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate assignment of DMA cookiesRussell King - ARM Linux1-22/+1
Everyone deals with assigning DMA cookies in the same way (it's part of the API so they should be), so lets consolidate the common code into a helper function to avoid this duplication. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: add private header fileRussell King - ARM Linux1-0/+1
Add a local private header file to contain definitions and declarations which should only be used by DMA engine drivers. We also fix linux/dmaengine.h to use LINUX_DMAENGINE_H to guard against multiple inclusion. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: move last completed cookie into generic dma_chan structureRussell King - ARM Linux1-5/+5
Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31at_hdmac: bugfix for enabling channel irqNikolaus Voss1-2/+2
commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: simplify device selection from platform data or DTNicolas Ferre1-32/+31
Using a configuration structure simplify the finding of SoC dependent parameters. Both platform data and device tree ids are using these structures. This will separate data from code and remove the need for an enum. Idea from Grant Likely. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: empty entry shape modificationNicolas Ferre1-1/+3
Trivial form modification to unify structure look. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: add const to struct platform_device_id definitionNicolas Ferre1-1/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul1-11/+11
resolved conflicts: drivers/media/video/mx3_camera.c
2011-11-10dmaengine: at_hdmac: add device tree supportNicolas Ferre1-1/+31
Add device tree probe support for atmel at_hdmac DMA driver. Bindings are added to specify DMA controller configuration. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-10dmaengine: at_hdmac: platform data move to use .id_tableNicolas Ferre1-10/+38
We remove the use of platform data from DMA controller driver. We now use of .id_table to distinguish between compatible types. The two implementations allow to determine the number of channels and the capabilities of the controller. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-27dmaengine: move drivers to dma_transfer_directionVinod Koul1-11/+11
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves dma/drivers/* to use new enum Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: Boojin Kim <boojin.kim@samsung.com> Cc: Barry Song <Baohua.Song@csr.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-09-20dmaengine: delete redundant chan_id and chancnt initialization in dma driversBarry Song1-3/+2
dma_async_device_register will re-init chan_id and chancnt, so whatever chan_id and chancnt are set in drivers, they will be re-written by dma_async_device_register. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Piotr Ziecik <kosmo@semihalf.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: Pelagicore AB <info@pelagicore.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-19dmaengine: at_hdmac: fix way to specify cyclic capabilityNicolas Ferre1-6/+4
In this driver, we can trigger cyclic transfer on peripherals-DMA interfaces. It is dependent on driver implementation but cannot depend on a platform property: we remove the dma_has_cap(DMA_CYCLIC, ) test which has no meaning. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-19dmaengine: at_hdmac: add wrappers for testing channel stateNicolas Ferre1-10/+9
Cyclic property and paused state are encoded as bits in the channel status bitfield. Tests of those bits are wrapped in convenient helper functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-19dmaengine: at_hdmac: improve power management routinesNicolas Ferre1-1/+87
Save/restore dma controller state across a suspend-resume sequence. The prepare() function will wait for the non-cyclic channels to become idle. It also deals with cyclic operations with the start at next period while resuming. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-19dmaengine: at_hdmac: replace spin_lock* with irqsave variantsNicolas Ferre1-22/+30
dmaengine routines can be called from interrupt context and with interrupts disabled. Whereas spin_unlock_bh can't be called from such contexts. So this patch converts all spin_lock* routines to irqsave variants. Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet can be interrupted, and dma requests from such interruptions may also call spin_lock. Idea from dw_dmac patch by Viresh Kumar. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-06-06dma: at_hdmac.c: use resource_sizeH Hartley Sweeten1-2/+2
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-28Merge branch 'next' of ↵Linus Torvalds1-85/+291
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits) x86: poll waiting for I/OAT DMA channel status maintainers: add dma engine tree details dmaengine: add TODO items for future work on dma drivers dmaengine: Add API documentation for slave dma usage dmaengine/dw_dmac: Update maintainer-ship dmaengine: move link order dmaengine/dw_dmac: implement pause and resume in dwc_control dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called dmaengine: at_hdmac: pause: no need to wait for FIFO empty pch_dma: modify pci device table definition pch_dma: Support new device ML7223 IOH pch_dma: Support I2S for ML7213 IOH pch_dma: Fix DMA setting issue pch_dma: modify for checkpatch pch_dma: fix dma direction issue for ML7213 IOH video-in dmaengine: at_hdmac: use descriptor chaining help function dmaengine: at_hdmac: implement pause and resume in atc_control ... Fix up trivial conflict in drivers/dma/dw_dmac.c