2 files changed, 245 insertions, 51 deletions

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5d5cc6111081..6053d0158b3b 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -341,7 +341,7 @@ config HP_ACCEL
 
 	  Support for a led indicating disk protection will be provided as
 	  hp::hddprotect. For more information on the feature, refer to
-	  Documentation/misc-devices/lis3lv02d.
+	  Documentation/misc-devices/lis3lv02d.rst.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called hp_accel.
@@ -433,9 +433,6 @@ config COMPAL_LAPTOP
 	  It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
 	  and battery charging level control.
 
-	  For a (possibly incomplete) list of supported laptops, please refer
-	  to: Documentation/platform/x86-laptop-drivers.txt
-
 config SONY_LAPTOP
 	tristate "Sony Laptop Extras"
 	depends on ACPI
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 6fa3cced6f8e..4fbdff48a4b5 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -21,18 +21,55 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/usb/pd.h>
 
 #define EXPECTED_PTYPE		4
 
+enum {
+	INT33FE_NODE_FUSB302,
+	INT33FE_NODE_MAX17047,
+	INT33FE_NODE_PI3USB30532,
+	INT33FE_NODE_DISPLAYPORT,
+	INT33FE_NODE_ROLE_SWITCH,
+	INT33FE_NODE_USB_CONNECTOR,
+	INT33FE_NODE_MAX,
+};
+
 struct cht_int33fe_data {
 	struct i2c_client *max17047;
 	struct i2c_client *fusb302;
 	struct i2c_client *pi3usb30532;
-	/* Contain a list-head must be per device */
-	struct device_connection connections[4];
+
+	struct fwnode_handle *dp;
+	struct fwnode_handle *mux;
+};
+
+static const struct software_node nodes[];
+
+static const struct software_node_ref_args pi3usb30532_ref = {
+	&nodes[INT33FE_NODE_PI3USB30532]
+};
+
+static const struct software_node_ref_args dp_ref = {
+	&nodes[INT33FE_NODE_DISPLAYPORT]
+};
+
+static struct software_node_ref_args mux_ref;
+
+static const struct software_node_reference usb_connector_refs[] = {
+	{ "orientation-switch", 1, &pi3usb30532_ref},
+	{ "mode-switch", 1, &pi3usb30532_ref},
+	{ "displayport", 1, &dp_ref},
+	{ }
+};
+
+static const struct software_node_reference fusb302_refs[] = {
+	{ "usb-role-switch", 1, &mux_ref},
+	{ }
 };
 
 /*
@@ -63,14 +100,6 @@ static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
 	return 1;
 }
 
-static struct i2c_client *cht_int33fe_find_max17047(void)
-{
-	struct i2c_client *max17047 = NULL;
-
-	i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
-	return max17047;
-}
-
 static const char * const max17047_suppliers[] = { "bq24190-charger" };
 
 static const struct property_entry max17047_props[] = {
@@ -80,18 +109,196 @@ static const struct property_entry max17047_props[] = {
 
 static const struct property_entry fusb302_props[] = {
 	PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microamp",   3000000),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000),
 	{ }
 };
 
+#define PDO_FIXED_FLAGS \
+	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
+
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS),
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS),
+	PDO_VAR(5000, 12000, 3000),
+};
+
+static const struct property_entry usb_connector_props[] = {
+	PROPERTY_ENTRY_STRING("data-role", "dual"),
+	PROPERTY_ENTRY_STRING("power-role", "dual"),
+	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
+	{ }
+};
+
+static const struct software_node nodes[] = {
+	{ "fusb302", NULL, fusb302_props, fusb302_refs },
+	{ "max17047", NULL, max17047_props },
+	{ "pi3usb30532" },
+	{ "displayport" },
+	{ "usb-role-switch" },
+	{ "connector", &nodes[0], usb_connector_props, usb_connector_refs },
+	{ }
+};
+
+static int cht_int33fe_setup_mux(struct cht_int33fe_data *data)
+{
+	struct fwnode_handle *fwnode;
+	struct device *dev;
+	struct device *p;
+
+	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_ROLE_SWITCH]);
+	if (!fwnode)
+		return -ENODEV;
+
+	/* First finding the platform device */
+	p = bus_find_device_by_name(&platform_bus_type, NULL,
+				    "intel_xhci_usb_sw");
+	if (!p)
+		return -EPROBE_DEFER;
+
+	/* Then the mux child device */
+	dev = device_find_child_by_name(p, "intel_xhci_usb_sw-role-switch");
+	put_device(p);
+	if (!dev)
+		return -EPROBE_DEFER;
+
+	/* If there already is a node for the mux, using that one. */
+	if (dev->fwnode)
+		fwnode_remove_software_node(fwnode);
+	else
+		dev->fwnode = fwnode;
+
+	data->mux = fwnode_handle_get(dev->fwnode);
+	put_device(dev);
+	mux_ref.node = to_software_node(data->mux);
+
+	return 0;
+}
+
+static int cht_int33fe_setup_dp(struct cht_int33fe_data *data)
+{
+	struct fwnode_handle *fwnode;
+	struct pci_dev *pdev;
+
+	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_DISPLAYPORT]);
+	if (!fwnode)
+		return -ENODEV;
+
+	/* First let's find the GPU PCI device */
+	pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL);
+	if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) {
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	/* Then the DP child device node */
+	data->dp = device_get_named_child_node(&pdev->dev, "DD02");
+	pci_dev_put(pdev);
+	if (!data->dp)
+		return -ENODEV;
+
+	fwnode->secondary = ERR_PTR(-ENODEV);
+	data->dp->secondary = fwnode;
+
+	return 0;
+}
+
+static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
+{
+	software_node_unregister_nodes(nodes);
+
+	if (data->mux) {
+		fwnode_handle_put(data->mux);
+		mux_ref.node = NULL;
+		data->mux = NULL;
+	}
+
+	if (data->dp) {
+		data->dp->secondary = NULL;
+		fwnode_handle_put(data->dp);
+		data->dp = NULL;
+	}
+}
+
+static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
+{
+	int ret;
+
+	ret = software_node_register_nodes(nodes);
+	if (ret)
+		return ret;
+
+	/* The devices that are not created in this driver need extra steps. */
+
+	/*
+	 * There is no ACPI device node for the USB role mux, so we need to find
+	 * the mux device and assign our node directly to it. That means we
+	 * depend on the mux driver. This function will return -PROBE_DEFER
+	 * until the mux device is registered.
+	 */
+	ret = cht_int33fe_setup_mux(data);
+	if (ret)
+		goto err_remove_nodes;
+
+	/*
+	 * The DP connector does have ACPI device node. In this case we can just
+	 * find that ACPI node and assign our node as the secondary node to it.
+	 */
+	ret = cht_int33fe_setup_dp(data);
+	if (ret)
+		goto err_remove_nodes;
+
+	return 0;
+
+err_remove_nodes:
+	cht_int33fe_remove_nodes(data);
+
+	return ret;
+}
+
+static int
+cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
+{
+	struct i2c_client *max17047 = NULL;
+	struct i2c_board_info board_info;
+	struct fwnode_handle *fwnode;
+	int ret;
+
+	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_MAX17047]);
+	if (!fwnode)
+		return -ENODEV;
+
+	i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
+	if (max17047) {
+		/* Pre-existing i2c-client for the max17047, add device-props */
+		fwnode->secondary = ERR_PTR(-ENODEV);
+		max17047->dev.fwnode->secondary = fwnode;
+		/* And re-probe to get the new device-props applied. */
+		ret = device_reprobe(&max17047->dev);
+		if (ret)
+			dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
+		return 0;
+	}
+
+	memset(&board_info, 0, sizeof(board_info));
+	strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
+	board_info.dev_name = "max17047";
+	board_info.fwnode = fwnode;
+	data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
+
+	return PTR_ERR_OR_ZERO(data->max17047);
+}
+
 static int cht_int33fe_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct i2c_board_info board_info;
 	struct cht_int33fe_data *data;
-	struct i2c_client *max17047;
+	struct fwnode_handle *fwnode;
 	struct regulator *regulator;
 	unsigned long long ptyp;
 	acpi_status status;
@@ -151,43 +358,25 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	/* Work around BIOS bug, see comment on cht_int33fe_find_max17047 */
-	max17047 = cht_int33fe_find_max17047();
-	if (max17047) {
-		/* Pre-existing i2c-client for the max17047, add device-props */
-		ret = device_add_properties(&max17047->dev, max17047_props);
-		if (ret)
-			return ret;
-		/* And re-probe to get the new device-props applied. */
-		ret = device_reprobe(&max17047->dev);
-		if (ret)
-			dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
-	} else {
-		memset(&board_info, 0, sizeof(board_info));
-		strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
-		board_info.dev_name = "max17047";
-		board_info.properties = max17047_props;
-		data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
-		if (IS_ERR(data->max17047))
-			return PTR_ERR(data->max17047);
-	}
+	ret = cht_int33fe_add_nodes(data);
+	if (ret)
+		return ret;
 
-	data->connections[0].endpoint[0] = "port0";
-	data->connections[0].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[0].id = "orientation-switch";
-	data->connections[1].endpoint[0] = "port0";
-	data->connections[1].endpoint[1] = "i2c-pi3usb30532";
-	data->connections[1].id = "mode-switch";
-	data->connections[2].endpoint[0] = "i2c-fusb302";
-	data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
-	data->connections[2].id = "usb-role-switch";
+	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
+	ret = cht_int33fe_register_max17047(dev, data);
+	if (ret)
+		goto out_remove_nodes;
 
-	device_connections_add(data->connections);
+	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_FUSB302]);
+	if (!fwnode) {
+		ret = -ENODEV;
+		goto out_unregister_max17047;
+	}
 
 	memset(&board_info, 0, sizeof(board_info));
 	strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
 	board_info.dev_name = "fusb302";
-	board_info.properties = fusb302_props;
+	board_info.fwnode = fwnode;
 	board_info.irq = fusb302_irq;
 
 	data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
@@ -196,8 +385,15 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 		goto out_unregister_max17047;
 	}
 
+	fwnode = software_node_fwnode(&nodes[INT33FE_NODE_PI3USB30532]);
+	if (!fwnode) {
+		ret = -ENODEV;
+		goto out_unregister_fusb302;
+	}
+
 	memset(&board_info, 0, sizeof(board_info));
 	board_info.dev_name = "pi3usb30532";
+	board_info.fwnode = fwnode;
 	strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
 
 	data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
@@ -216,7 +412,8 @@ out_unregister_fusb302:
 out_unregister_max17047:
 	i2c_unregister_device(data->max17047);
 
-	device_connections_remove(data->connections);
+out_remove_nodes:
+	cht_int33fe_remove_nodes(data);
 
 	return ret;
 }
@@ -229,7 +426,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
 	i2c_unregister_device(data->fusb302);
 	i2c_unregister_device(data->max17047);
 
-	device_connections_remove(data->connections);
+	cht_int33fe_remove_nodes(data);
 
 	return 0;
 }