diff options
Diffstat (limited to 'arch')
77 files changed, 1093 insertions, 791 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 24efdfe277fc..3e2e540a0f2a 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -61,6 +61,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool default y diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h index 440747ca6349..5728c52a7412 100644 --- a/arch/alpha/include/asm/scatterlist.h +++ b/arch/alpha/include/asm/scatterlist.h @@ -1,24 +1,7 @@ #ifndef _ALPHA_SCATTERLIST_H #define _ALPHA_SCATTERLIST_H -#include <asm/page.h> -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - - unsigned int length; - - dma_addr_t dma_address; - __u32 dma_length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->dma_length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 9236475e7131..43af89c027d9 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:31 2010 +# Wed May 26 19:04:29 2010 # CONFIG_ARM=y CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -186,9 +189,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -224,7 +229,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -233,6 +238,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -243,11 +249,15 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_SAMSUNG_CLKSRC=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_PULL_UP=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_ADC=y CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HWMON=y CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y CONFIG_S3C_DMA=y @@ -260,6 +270,7 @@ CONFIG_PLAT_S3C24XX=y CONFIG_CPU_LLSERIAL_S3C2410=y CONFIG_CPU_LLSERIAL_S3C2440=y CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2443_CLOCK=y CONFIG_S3C24XX_DCLK=y CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=128 @@ -270,6 +281,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set CONFIG_MACH_SMDK=y CONFIG_S3C24XX_SIMTEC_AUDIO=y +CONFIG_S3C2410_SETUP_TS=y # # S3C2400 Machines @@ -289,6 +301,7 @@ CONFIG_ARCH_H1940=y # CONFIG_H1940BT is not set CONFIG_PM_H1940=y CONFIG_MACH_N30=y +CONFIG_MACH_N35=y CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y @@ -309,6 +322,11 @@ CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y + +# +# S3C2416 Machines +# +# CONFIG_MACH_SMDK2416 is not set CONFIG_CPU_S3C2440=y CONFIG_CPU_S3C2442=y CONFIG_CPU_S3C244X=y @@ -330,6 +348,7 @@ CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_AT2440EVB=y CONFIG_MACH_MINI2440=y +# CONFIG_MACH_RX1950 is not set CONFIG_CPU_S3C2443=y CONFIG_S3C2443_DMA=y @@ -410,6 +429,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -509,7 +529,9 @@ CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_VENO is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" @@ -566,6 +588,16 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m + +# +# Xtables targets +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_CT is not set @@ -577,9 +609,14 @@ CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m @@ -598,6 +635,7 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -605,7 +643,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -613,7 +650,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -713,6 +749,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +# CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set @@ -739,6 +776,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m +# CONFIG_BT_L2CAP_EXT_FEATURES is not set CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -775,6 +813,7 @@ CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -785,6 +824,7 @@ CONFIG_MAC80211_LEDS=y # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set +# CONFIG_CAIF is not set # # Device Drivers @@ -828,6 +868,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -882,9 +923,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -1149,6 +1193,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_MAX7359 is not set @@ -1212,6 +1257,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_S3C2410 is not set @@ -1248,6 +1294,7 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m @@ -1255,6 +1302,7 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # @@ -1287,6 +1335,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_N_HDLC is not set +# CONFIG_N_GSM is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_STALDRV is not set @@ -1324,6 +1373,8 @@ CONFIG_SERIAL_S3C2440=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1499,6 +1550,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set @@ -1836,10 +1888,12 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set +# CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1999,10 +2053,6 @@ CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -2274,6 +2324,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -2284,6 +2335,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index a3a9993e5cd0..7d8b4cf3858c 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:32 2010 +# Wed May 26 19:04:30 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -34,6 +36,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -179,9 +182,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -217,7 +222,7 @@ CONFIG_MMU=y CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -226,6 +231,7 @@ CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -251,7 +257,10 @@ CONFIG_S3C_DEV_I2C1=y CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HSOTG=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y CONFIG_S3C_DMA=y # @@ -260,6 +269,7 @@ CONFIG_S3C_DMA=y # CONFIG_SAMSUNG_PM_DEBUG is not set # CONFIG_S3C_PM_DEBUG_LED_SMDK is not set # CONFIG_SAMSUNG_PM_CHECK is not set +CONFIG_SAMSUNG_WAKEMASK=y CONFIG_PLAT_S3C64XX=y CONFIG_CPU_S3C6410=y CONFIG_S3C64XX_DMA=y @@ -277,6 +287,8 @@ CONFIG_SMDK6410_SD_CH0=y # CONFIG_SMDK6410_WM1192_EV1 is not set # CONFIG_MACH_NCP is not set # CONFIG_MACH_HMT is not set +# CONFIG_MACH_SMARTQ5 is not set +# CONFIG_MACH_SMARTQ7 is not set # # Processor Type @@ -302,6 +314,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y @@ -352,6 +365,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -430,6 +444,7 @@ CONFIG_MTD=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -472,9 +487,12 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -569,6 +587,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set @@ -638,6 +657,8 @@ CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -791,6 +812,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -877,6 +899,7 @@ CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_S3C_SOC_AC97=m +# CONFIG_SND_S3C64XX_SOC_WM8580 is not set CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set @@ -936,10 +959,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -1096,6 +1115,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -1106,6 +1126,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig index 619bfab3ab39..532e987beb4d 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p6440_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:18 2010 +# Wed May 26 19:04:32 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,15 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +287,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +339,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -490,7 +504,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -546,6 +562,8 @@ CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -593,6 +611,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -649,10 +668,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -850,6 +865,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -860,6 +876,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig index d7ea27509cf4..068219b360f5 100644 --- a/arch/arm/configs/s5p6442_defconfig +++ b/arch/arm/configs/s5p6442_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:19 2010 +# Wed May 26 19:04:34 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set CONFIG_ARCH_S5P6442=y -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6442=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,12 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +284,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +336,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -471,6 +482,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -525,6 +537,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -624,10 +638,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -836,6 +846,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -846,6 +857,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index 2053be6c9af1..ebc6245b9fca 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Wed Jul 1 15:53:07 2009 +# Linux kernel version: 2.6.34 +# Wed May 26 19:04:35 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y -CONFIG_MMU=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,7 +20,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -31,6 +35,13 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -38,14 +49,15 @@ CONFIG_SWAP=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -59,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -80,19 +93,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -122,25 +137,56 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -156,6 +202,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -164,39 +211,64 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set CONFIG_ARCH_S5PC100=y +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_PLAT_S3C=y +# CONFIG_PLAT_SPEAR is not set +CONFIG_PLAT_SAMSUNG=y # # Boot options # # CONFIG_S3C_BOOT_ERROR_RESET is not set CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DEV_I2C1=y +CONFIG_S3C_DEV_FB=y +CONFIG_S3C_PL330_DMA=y # # Power management # -CONFIG_S3C_LOWLEVEL_UART_PORT=0 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y -CONFIG_S3C_GPIO_PULL_UPDOWN=y -CONFIG_PLAT_S5PC1XX=y -CONFIG_CPU_S5PC100_INIT=y -CONFIG_CPU_S5PC100_CLOCK=y -CONFIG_S5PC100_SETUP_I2C0=y +CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PC100=y +CONFIG_S5PC100_SETUP_FB_24BPP=y +CONFIG_S5PC100_SETUP_I2C1=y +CONFIG_S5PC100_SETUP_SDHCI=y +CONFIG_S5PC100_SETUP_SDHCI_GPIO=y CONFIG_MACH_SMDKC100=y # @@ -206,7 +278,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -224,11 +296,15 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -244,8 +320,11 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set @@ -258,12 +337,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -274,6 +352,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -317,6 +396,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -331,6 +411,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -338,9 +422,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -350,18 +437,21 @@ CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -369,6 +459,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -385,13 +476,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -399,6 +496,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -418,6 +516,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -444,11 +543,16 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS=3 +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -461,6 +565,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -471,9 +576,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -486,20 +593,15 @@ CONFIG_I2C_HELPER_AUTO=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -508,13 +610,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -523,10 +628,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -535,10 +649,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -549,6 +664,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -573,8 +689,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -584,9 +702,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -599,10 +716,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -610,10 +729,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -637,7 +761,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -680,13 +803,12 @@ CONFIG_SDIO_UART=y CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -710,6 +832,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -758,6 +881,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -772,7 +896,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -789,6 +912,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -826,11 +950,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -839,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -849,6 +976,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -857,8 +985,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y +# CONFIG_OC_ETM is not set CONFIG_DEBUG_S3C_UART=0 # @@ -867,7 +996,11 @@ CONFIG_DEBUG_S3C_UART=0 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set @@ -884,8 +1017,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig index 796cb78498c3..c4de360b0f69 100644 --- a/arch/arm/configs/s5pc110_defconfig +++ b/arch/arm/configs/s5pc110_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:21 2010 +# Wed May 26 19:04:37 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,22 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set # CONFIG_MACH_SMDKV210 is not set CONFIG_MACH_SMDKC110=y @@ -281,12 +293,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +349,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,6 +496,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -536,6 +552,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +601,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +654,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +862,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +874,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 6831dab97d96..e2f5bce29828 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:22 2010 +# Wed May 26 19:04:39 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,24 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set CONFIG_MACH_SMDKV210=y # CONFIG_MACH_SMDKC110 is not set @@ -281,12 +295,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +351,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,7 +498,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -536,6 +555,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +604,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +657,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +865,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +877,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index bcda59f39941..2f87870d9347 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -3,9 +3,6 @@ #include <asm/memory.h> #include <asm/types.h> - #include <asm-generic/scatterlist.h> -#undef ARCH_HAS_SG_CHAIN - #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h index 5a85e24f3673..d4f1e9675069 100644 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -22,6 +22,9 @@ struct davinci_mmc_config { /* Version of the MMC/SD controller */ u8 version; + + /* Number of sg segments */ + u8 nr_sg; }; void davinci_setup_mmc(int module, struct davinci_mmc_config *config); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index e7d629b3c76a..f474a80b8867 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -137,9 +137,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 5fcb52e71298..fefd7e6e9779 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -209,8 +209,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 81bba194b030..b95261013812 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -579,9 +579,7 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); gpio_direction_input(OMAP3_EVM_TS_GPIO); - - omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 395d049bf010..db06dc910ba7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -130,8 +130,8 @@ static struct platform_device pandora_keys_gpio = { static void __init pandora_keys_gpio_init(void) { /* set debounce time for GPIO banks 4 and 6 */ - omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); - omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME); } static int board_keymap[] = { diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2504d41f923e..2f5f8233dd5b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -328,8 +328,7 @@ static void __init omap3_ads7846_init(void) } gpio_direction_input(OMAP3_TS_GPIO); - omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_TS_GPIO, 310); } static struct ads7846_platform_data ads7846_config = { diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h index a4b9b40d18f2..911854d9ad42 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -72,7 +72,14 @@ #define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) #define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) +/* + * S5P6440 has 0-15 external interrupts in group 0. Only these can be used + * to wake up from sleep. If request is beyond this range, by mistake, a large + * return value for an irq number should be indication of something amiss. + */ +#define S5P_EINT_BASE2 (0xf0000000) /* * Next the external interrupt groups. These are similar to the IRQ_EINT(x) diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h index da665809f6e4..02c23749c023 100644 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ b/arch/arm/mach-s5p6442/include/mach/irqs.h @@ -77,8 +77,9 @@ #define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_IRQ_EINT_BASE + (x)-16)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT(31) + 1) diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 15066df3ced9..28aa551dc3a8 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -100,9 +100,6 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_EINT_BASE2 + (x) - 16)) - #define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) #define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 763edebdd577..dd6295e1251d 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -60,12 +60,9 @@ #define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \ - (((irq) - S5P_EINT_BASE2))) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 92fc6c7fc064..96895378ea27 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,22 +118,12 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ - : ((x) + S5P_EINT_16_31_BASE)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) /* Set the default NR_IRQS */ - #define NR_IRQS (IRQ_EINT(31) + 1) -#define EINT_GPIO_0(x) S5PV210_GPH0(x) -#define EINT_GPIO_1(x) S5PV210_GPH1(x) -#define EINT_GPIO_2(x) S5PV210_GPH2(x) -#define EINT_GPIO_3(x) S5PV210_GPH3(x) - /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 6d068091c36c..49e029b4978a 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -27,12 +27,9 @@ #define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ - : ((irq) - S5P_EINT_16_31_BASE)) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) @@ -41,4 +38,11 @@ #define S5P_EXTINT_RISEEDGE (0x03) #define S5P_EXTINT_BOTHEDGE (0x04) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index dc2ac42d6319..393e9219a5b6 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -624,79 +624,58 @@ do { \ __raw_writel(l, base + reg); \ } while(0) -void omap_set_gpio_debounce(int gpio, int enable) +/** + * _set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps so we need + * to convert and round up to the closest unit. + */ +static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, + unsigned debounce) { - struct gpio_bank *bank; - void __iomem *reg; - unsigned long flags; - u32 val, l = 1 << get_gpio_index(gpio); + void __iomem *reg = bank->base; + u32 val; + u32 l; + + if (debounce < 32) + debounce = 0x01; + else if (debounce > 7936) + debounce = 0xff; + else + debounce = (debounce / 0x1f) - 1; - if (cpu_class_is_omap1()) - return; + l = 1 << get_gpio_index(gpio); - bank = get_gpio_bank(gpio); - reg = bank->base; + if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_DEBOUNCINGTIME; + else + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + + __raw_writel(debounce, reg); + reg = bank->base; if (cpu_is_omap44xx()) reg += OMAP4_GPIO_DEBOUNCENABLE; else reg += OMAP24XX_GPIO_DEBOUNCE_EN; - if (!(bank->mod_usage & l)) { - printk(KERN_ERR "GPIO %d not requested\n", gpio); - return; - } - - spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); - if (enable && !(val & l)) + if (debounce) { val |= l; - else if (!enable && (val & l)) - val &= ~l; - else - goto done; - - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - bank->dbck_enable_mask = val; - if (enable) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_enable(bank->dbck); - else + } else { + val &= ~l; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_disable(bank->dbck); } __raw_writel(val, reg); -done: - spin_unlock_irqrestore(&bank->lock, flags); } -EXPORT_SYMBOL(omap_set_gpio_debounce); - -void omap_set_gpio_debounce_time(int gpio, int enc_time) -{ - struct gpio_bank *bank; - void __iomem *reg; - - if (cpu_class_is_omap1()) - return; - - bank = get_gpio_bank(gpio); - reg = bank->base; - - if (!bank->mod_usage) { - printk(KERN_ERR "GPIO not requested\n"); - return; - } - - enc_time &= 0xff; - - if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(enc_time, reg); -} -EXPORT_SYMBOL(omap_set_gpio_debounce_time); #ifdef CONFIG_ARCH_OMAP2PLUS static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, @@ -1656,6 +1635,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) return 0; } +static int gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_debounce(bank, offset, debounce); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_bank *bank; @@ -1909,6 +1902,7 @@ static int __init _omap_gpio_init(void) bank->chip.direction_input = gpio_input; bank->chip.get = gpio_get; bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; bank->chip.set = gpio_set; bank->chip.to_irq = gpio_2irq; if (bank_is_mpuio(bank)) { diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 5cb2dd1da632..11d6a1bbd90d 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -29,3 +29,4 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440. diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 9ff3d718be39..3fb3a3a17465 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -87,4 +87,11 @@ #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ + : ((x) - 16 + S5P_EINT_BASE2)) + +#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ + ((irq) - S5P_EINT_BASE1) : \ + ((irq) + 16 - S5P_EINT_BASE2)) + #endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index eaa70aa0127b..e56c8075df97 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -60,7 +60,7 @@ static void s5p_irq_eint_maskack(unsigned int irq) static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) { - int offs = eint_offset(irq); + int offs = EINT_OFFSET(irq); int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -139,17 +139,16 @@ static struct irq_chip s5p_irq_eint = { */ static inline void s5p_irq_demux_eint(unsigned int start) { - u32 status; + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); unsigned int irq; - status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); status &= ~mask; status &= 0xff; while (status) { - irq = fls(status); - generic_handle_irq(irq - 1 + start); + irq = fls(status) - 1; + generic_handle_irq(irq + start); status &= ~(1 << irq); } } @@ -162,12 +161,18 @@ static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) static inline void s5p_irq_vic_eint_mask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_mask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR); } static void s5p_irq_vic_eint_unmask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_unmask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE); } static inline void s5p_irq_vic_eint_ack(unsigned int irq) diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h index 377320e3bd17..06394e5ead6c 100644 --- a/arch/avr32/include/asm/scatterlist.h +++ b/arch/avr32/include/asm/scatterlist.h @@ -1,25 +1,7 @@ #ifndef __ASM_AVR32_SCATTERLIST_H #define __ASM_AVR32_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h index 04f448711cd0..64d41d34ab0b 100644 --- a/arch/blackfin/include/asm/scatterlist.h +++ b/arch/blackfin/include/asm/scatterlist.h @@ -1,27 +1,7 @@ #ifndef _BLACKFIN_SCATTERLIST_H #define _BLACKFIN_SCATTERLIST_H -#include <linux/mm.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 43eb969405d1..6ec77685df52 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -292,28 +292,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } -#ifdef CONFIG_BINFMT_ELF_FDPIC - case PTRACE_GETFDPIC: { - unsigned long tmp = 0; - - switch (addr) { - case_PTRACE_GETFDPIC_EXEC: - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case_PTRACE_GETFDPIC_INTERP: - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = put_user(tmp, datap); - break; - } -#endif - /* when I and D space are separate, this will have to be fixed. */ case PTRACE_POKEDATA: pr_debug("ptrace: PTRACE_PEEKDATA\n"); @@ -357,8 +335,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_PEEKUSR: switch (addr) { #ifdef CONFIG_BINFMT_ELF_FDPIC /* backwards compat */ - case PT_FDPIC_EXEC: goto case_PTRACE_GETFDPIC_EXEC; - case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP; + case PT_FDPIC_EXEC: + request = PTRACE_GETFDPIC; + addr = PTRACE_GETFDPIC_EXEC; + goto case_default; + case PT_FDPIC_INTERP: + request = PTRACE_GETFDPIC; + addr = PTRACE_GETFDPIC_INTERP; + goto case_default; #endif default: ret = get_reg(child, addr, datap); @@ -385,6 +369,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(struct pt_regs), (const void __user *)data); + case_default: default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h index faff53ad1f96..249a7842ff5f 100644 --- a/arch/cris/include/asm/scatterlist.h +++ b/arch/cris/include/asm/scatterlist.h @@ -1,22 +1,7 @@ #ifndef __ASM_CRIS_SCATTERLIST_H #define __ASM_CRIS_SCATTERLIST_H -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to */ - unsigned int length; - - /* The following is i386 highmem junk - not used by us */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - -}; - -#define sg_dma_address(sg) ((sg)->address) -#define sg_dma_len(sg) ((sg)->length) -/* i386 junk */ +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x1fffffff) diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h index 4bca8a28546c..1614bfd7e3a4 100644 --- a/arch/frv/include/asm/scatterlist.h +++ b/arch/frv/include/asm/scatterlist.h @@ -1,45 +1,7 @@ #ifndef _ASM_SCATTERLIST_H #define _ASM_SCATTERLIST_H -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_buf(sg, some_ptr, length); - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffffUL) diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index 60eeed3694c0..fac028936a04 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -344,26 +344,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(child->thread.user->f), (const void __user *)data); - case PTRACE_GETFDPIC: - tmp = 0; - switch (addr) { - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = 0; - if (put_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - break; - default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index 71abd1510a59..6c155d69da29 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -46,8 +46,9 @@ static void frv_change_dcache_mode(unsigned long newmode) /* * handle requests to dynamically switch the write caching mode delivered by /proc */ -static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int procctl_frv_cachemode(ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) { unsigned long hsr0; char buff[8]; @@ -84,7 +85,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, } /* read the state */ - if (filp->f_pos > 0) { + if (*ppos > 0) { *lenp = 0; return 0; } @@ -110,7 +111,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, return -EFAULT; *lenp = len; - filp->f_pos = len; + *ppos = len; return 0; } /* end procctl_frv_cachemode() */ @@ -120,8 +121,9 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, * permit the mm_struct the nominated process is using have its MMU context ID pinned */ #ifdef CONFIG_MMU -static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int procctl_frv_pin_cxnr(ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) { pid_t pid; char buff[16], *p; @@ -150,7 +152,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, } /* read the currently pinned CXN */ - if (filp->f_pos > 0) { + if (*ppos > 0) { *lenp = 0; return 0; } @@ -163,7 +165,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, return -EFAULT; *lenp = len; - filp->f_pos = len; + *ppos = len; return 0; } /* end procctl_frv_pin_cxnr() */ diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h index d3ecdd87ac90..de08a4a2cc1c 100644 --- a/arch/h8300/include/asm/scatterlist.h +++ b/arch/h8300/include/asm/scatterlist.h @@ -1,17 +1,7 @@ #ifndef _H8300_SCATTERLIST_H #define _H8300_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9676100b83ee..95610820041e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -56,6 +56,9 @@ config MMU config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config SWIOTLB bool @@ -495,6 +498,14 @@ config HAVE_ARCH_NODEDATA_EXTENSION def_bool y depends on NUMA +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config HAVE_MEMORYLESS_NODES + def_bool y + depends on NUMA + config ARCH_PROC_KCORE_TEXT def_bool y depends on PROC_KCORE diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h index d8e98961dec7..f299a4fb25c8 100644 --- a/arch/ia64/include/asm/scatterlist.h +++ b/arch/ia64/include/asm/scatterlist.h @@ -1,6 +1,7 @@ #ifndef _ASM_IA64_SCATTERLIST_H #define _ASM_IA64_SCATTERLIST_H +#include <asm-generic/scatterlist.h> /* * It used to be that ISA_DMA_THRESHOLD had something to do with the * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart @@ -10,7 +11,6 @@ * that's 4GB - 1. */ #define ISA_DMA_THRESHOLD 0xffffffff - -#include <asm-generic/scatterlist.h> +#define ARCH_HAS_SG_CHAIN #endif /* _ASM_IA64_SCATTERLIST_H */ diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index d323071d0f91..09f646753d1a 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -26,11 +26,6 @@ #define RECLAIM_DISTANCE 15 /* - * Returns the number of the node containing CPU 'cpu' - */ -#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu]) - -/* * Returns a bitmask of CPUs on Node 'node'. */ #define cpumask_of_node(node) ((node) == -1 ? \ diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c index 3095654f9ab3..d9485d952ed0 100644 --- a/arch/ia64/kernel/pci-swiotlb.c +++ b/arch/ia64/kernel/pci-swiotlb.c @@ -31,8 +31,6 @@ struct dma_map_ops swiotlb_dma_ops = { .unmap_sg = swiotlb_unmap_sg_attrs, .sync_single_for_cpu = swiotlb_sync_single_for_cpu, .sync_single_for_device = swiotlb_sync_single_for_device, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .dma_supported = swiotlb_dma_supported, diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 0dec7f702448..7c7909f9bc93 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -638,7 +638,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) */ read_lock(&tasklist_lock); - if (child->signal) { + if (child->sighand) { spin_lock_irq(&child->sighand->siglock); if (child->state == TASK_STOPPED && !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) { @@ -662,7 +662,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) * job control stop, so that SIGCONT can be used to wake it up. */ read_lock(&tasklist_lock); - if (child->signal) { + if (child->sighand) { spin_lock_irq(&child->sighand->siglock); if (child->state == TASK_TRACED && (child->signal->flags & SIGNAL_STOP_STOPPED)) { diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index e5230b2ff2c5..518e876a410d 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -390,6 +390,12 @@ smp_callin (void) fix_b0_for_bsp(); + /* + * numa_node_id() works after this. + */ + set_numa_node(cpu_to_node_map[cpuid]); + set_numa_mem(local_memory_node(cpu_to_node_map[cpuid])); + ipi_call_lock_irq(); spin_lock(&vector_lock); /* Setup the per cpu irq handling data structures */ @@ -632,6 +638,7 @@ void __devinit smp_prepare_boot_cpu(void) { cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callin_map); + set_numa_node(cpu_to_node_map[smp_processor_id()]); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; paravirt_post_smp_prepare_boot_cpu(); } diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h index 1ed372c73d0b..aeeddd8dac17 100644 --- a/arch/m32r/include/asm/scatterlist.h +++ b/arch/m32r/include/asm/scatterlist.h @@ -1,20 +1,7 @@ #ifndef _ASM_M32R_SCATTERLIST_H #define _ASM_M32R_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to, NULL for - * highmem page */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x1fffffff) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index b5da298ba61d..2e3737b92ffc 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -7,6 +7,7 @@ config M68K default y select HAVE_AOUT select HAVE_IDE + select GENERIC_ATOMIC64 config MMU bool diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index d2cc35d98532..b1577f741fa8 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -97,10 +97,6 @@ static void amiga_get_model(char *model); static void amiga_get_hardware_list(struct seq_file *m); /* amiga specific timer functions */ static unsigned long amiga_gettimeoffset(void); -static int a3000_hwclk(int, struct rtc_time *); -static int a2000_hwclk(int, struct rtc_time *); -static int amiga_set_clock_mmss(unsigned long); -static unsigned int amiga_get_ss(void); extern void amiga_mksound(unsigned int count, unsigned int ticks); static void amiga_reset(void); extern void amiga_init_sound(void); @@ -138,10 +134,6 @@ static struct { } }; -static struct resource rtc_resource = { - .start = 0x00dc0000, .end = 0x00dcffff -}; - static struct resource ram_resource[NUM_MEMINFO]; @@ -387,15 +379,6 @@ void __init config_amiga(void) mach_get_model = amiga_get_model; mach_get_hardware_list = amiga_get_hardware_list; mach_gettimeoffset = amiga_gettimeoffset; - if (AMIGAHW_PRESENT(A3000_CLK)) { - mach_hwclk = a3000_hwclk; - rtc_resource.name = "A3000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - mach_hwclk = a2000_hwclk; - rtc_resource.name = "A2000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } /* * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI @@ -404,8 +387,6 @@ void __init config_amiga(void) */ mach_max_dma_address = 0xffffffff; - mach_set_clock_mmss = amiga_set_clock_mmss; - mach_get_ss = amiga_get_ss; mach_reset = amiga_reset; #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) mach_beep = amiga_mksound; @@ -530,161 +511,6 @@ static unsigned long amiga_gettimeoffset(void) return ticks + offset; } -static int a3000_hwclk(int op, struct rtc_time *t) -{ - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - - if (!op) { /* read */ - t->tm_sec = tod_3000.second1 * 10 + tod_3000.second2; - t->tm_min = tod_3000.minute1 * 10 + tod_3000.minute2; - t->tm_hour = tod_3000.hour1 * 10 + tod_3000.hour2; - t->tm_mday = tod_3000.day1 * 10 + tod_3000.day2; - t->tm_wday = tod_3000.weekday; - t->tm_mon = tod_3000.month1 * 10 + tod_3000.month2 - 1; - t->tm_year = tod_3000.year1 * 10 + tod_3000.year2; - if (t->tm_year <= 69) - t->tm_year += 100; - } else { - tod_3000.second1 = t->tm_sec / 10; - tod_3000.second2 = t->tm_sec % 10; - tod_3000.minute1 = t->tm_min / 10; - tod_3000.minute2 = t->tm_min % 10; - tod_3000.hour1 = t->tm_hour / 10; - tod_3000.hour2 = t->tm_hour % 10; - tod_3000.day1 = t->tm_mday / 10; - tod_3000.day2 = t->tm_mday % 10; - if (t->tm_wday != -1) - tod_3000.weekday = t->tm_wday; - tod_3000.month1 = (t->tm_mon + 1) / 10; - tod_3000.month2 = (t->tm_mon + 1) % 10; - if (t->tm_year >= 100) - t->tm_year -= 100; - tod_3000.year1 = t->tm_year / 10; - tod_3000.year2 = t->tm_year % 10; - } - - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - - return 0; -} - -static int a2000_hwclk(int op, struct rtc_time *t) -{ - int cnt = 5; - - tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD; - - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - udelay(70); - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - --cnt; - } - - if (!cnt) - printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n", - tod_2000.cntrl1); - - if (!op) { /* read */ - t->tm_sec = tod_2000.second1 * 10 + tod_2000.second2; - t->tm_min = tod_2000.minute1 * 10 + tod_2000.minute2; - t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2; - t->tm_mday = tod_2000.day1 * 10 + tod_2000.day2; - t->tm_wday = tod_2000.weekday; - t->tm_mon = tod_2000.month1 * 10 + tod_2000.month2 - 1; - t->tm_year = tod_2000.year1 * 10 + tod_2000.year2; - if (t->tm_year <= 69) - t->tm_year += 100; - - if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) { - if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12) - t->tm_hour = 0; - else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12) - t->tm_hour += 12; - } - } else { - tod_2000.second1 = t->tm_sec / 10; - tod_2000.second2 = t->tm_sec % 10; - tod_2000.minute1 = t->tm_min / 10; - tod_2000.minute2 = t->tm_min % 10; - if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE) - tod_2000.hour1 = t->tm_hour / 10; - else if (t->tm_hour >= 12) - tod_2000.hour1 = TOD2000_HOUR1_PM + - (t->tm_hour - 12) / 10; - else - tod_2000.hour1 = t->tm_hour / 10; - tod_2000.hour2 = t->tm_hour % 10; - tod_2000.day1 = t->tm_mday / 10; - tod_2000.day2 = t->tm_mday % 10; - if (t->tm_wday != -1) - tod_2000.weekday = t->tm_wday; - tod_2000.month1 = (t->tm_mon + 1) / 10; - tod_2000.month2 = (t->tm_mon + 1) % 10; - if (t->tm_year >= 100) - t->tm_year -= 100; - tod_2000.year1 = t->tm_year / 10; - tod_2000.year2 = t->tm_year % 10; - } - - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - - return 0; -} - -static int amiga_set_clock_mmss(unsigned long nowtime) -{ - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - if (AMIGAHW_PRESENT(A3000_CLK)) { - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - - tod_3000.second1 = real_seconds / 10; - tod_3000.second2 = real_seconds % 10; - tod_3000.minute1 = real_minutes / 10; - tod_3000.minute2 = real_minutes % 10; - - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - int cnt = 5; - - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - udelay(70); - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - --cnt; - } - - if (!cnt) - printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1); - - tod_2000.second1 = real_seconds / 10; - tod_2000.second2 = real_seconds % 10; - tod_2000.minute1 = real_minutes / 10; - tod_2000.minute2 = real_minutes % 10; - - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - } - - return 0; -} - -static unsigned int amiga_get_ss(void) -{ - unsigned int s; - - if (AMIGAHW_PRESENT(A3000_CLK)) { - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - s = tod_3000.second1 * 10 + tod_3000.second2; - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - s = tod_2000.second1 * 10 + tod_2000.second2; - } - return s; -} - static NORET_TYPE void amiga_reset(void) ATTRIB_NORET; diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c index 38f18bf14737..7fd8b41723ea 100644 --- a/arch/m68k/amiga/platform.c +++ b/arch/m68k/amiga/platform.c @@ -11,6 +11,7 @@ #include <linux/zorro.h> #include <asm/amigahw.h> +#include <asm/amigayle.h> #ifdef CONFIG_ZORRO @@ -55,11 +56,77 @@ static int __init amiga_init_bus(void) subsys_initcall(amiga_init_bus); -#endif /* CONFIG_ZORRO */ + +static int z_dev_present(zorro_id id) +{ + unsigned int i; + + for (i = 0; i < zorro_num_autocon; i++) + if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) && + zorro_autocon[i].rom.er_Product == ZORRO_PROD(id)) + return 1; + + return 0; +} + +#else /* !CONFIG_ZORRO */ + +static inline int z_dev_present(zorro_id id) { return 0; } + +#endif /* !CONFIG_ZORRO */ + + +static const struct resource a3000_scsi_resource __initconst = { + .start = 0xdd0000, + .end = 0xdd00ff, + .flags = IORESOURCE_MEM, +}; + + +static const struct resource a4000t_scsi_resource __initconst = { + .start = 0xdd0000, + .end = 0xdd0fff, + .flags = IORESOURCE_MEM, +}; + + +static const struct resource a1200_ide_resource __initconst = { + .start = 0xda0000, + .end = 0xda1fff, + .flags = IORESOURCE_MEM, +}; + +static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = { + .base = 0xda0000, + .irqport = 0xda9000, + .explicit_ack = 1, +}; + + +static const struct resource a4000_ide_resource __initconst = { + .start = 0xdd2000, + .end = 0xdd3fff, + .flags = IORESOURCE_MEM, +}; + +static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = { + .base = 0xdd2020, + .irqport = 0xdd3020, + .explicit_ack = 0, +}; + + +static const struct resource amiga_rtc_resource __initconst = { + .start = 0x00dc0000, + .end = 0x00dcffff, + .flags = IORESOURCE_MEM, +}; static int __init amiga_init_devices(void) { + struct platform_device *pdev; + if (!MACH_IS_AMIGA) return -ENODEV; @@ -77,6 +144,53 @@ static int __init amiga_init_devices(void) if (AMIGAHW_PRESENT(AMI_FLOPPY)) platform_device_register_simple("amiga-floppy", -1, NULL, 0); + if (AMIGAHW_PRESENT(A3000_SCSI)) + platform_device_register_simple("amiga-a3000-scsi", -1, + &a3000_scsi_resource, 1); + + if (AMIGAHW_PRESENT(A4000_SCSI)) + platform_device_register_simple("amiga-a4000t-scsi", -1, + &a4000t_scsi_resource, 1); + + if (AMIGAHW_PRESENT(A1200_IDE) || + z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) { + pdev = platform_device_register_simple("amiga-gayle-ide", -1, + &a1200_ide_resource, 1); + platform_device_add_data(pdev, &a1200_ide_pdata, + sizeof(a1200_ide_pdata)); + } + + if (AMIGAHW_PRESENT(A4000_IDE)) { + pdev = platform_device_register_simple("amiga-gayle-ide", -1, + &a4000_ide_resource, 1); + platform_device_add_data(pdev, &a4000_ide_pdata, + sizeof(a4000_ide_pdata)); + } + + + /* other I/O hardware */ + if (AMIGAHW_PRESENT(AMI_KEYBOARD)) + platform_device_register_simple("amiga-keyboard", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_MOUSE)) + platform_device_register_simple("amiga-mouse", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_SERIAL)) + platform_device_register_simple("amiga-serial", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_PARALLEL)) + platform_device_register_simple("amiga-parallel", -1, NULL, 0); + + + /* real time clocks */ + if (AMIGAHW_PRESENT(A2000_CLK)) + platform_device_register_simple("rtc-msm6242", -1, + &amiga_rtc_resource, 1); + + if (AMIGAHW_PRESENT(A3000_CLK)) + platform_device_register_simple("rtc-rp5c01", -1, + &amiga_rtc_resource, 1); + return 0; } diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h index bb5a6aa329f3..a01453d9c231 100644 --- a/arch/m68k/include/asm/amigayle.h +++ b/arch/m68k/include/asm/amigayle.h @@ -104,4 +104,10 @@ struct GAYLE { #define GAYLE_CFG_250NS 0x00 #define GAYLE_CFG_720NS 0x0c +struct gayle_ide_platform_data { + unsigned long base; + unsigned long irqport; + int explicit_ack; /* A1200 IDE needs explicit ack */ +}; + #endif /* asm-m68k/amigayle.h */ diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index 8d29145ebb27..eab36dcacf6c 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -3,3 +3,5 @@ #else #include "atomic_mm.h" #endif + +#include <asm-generic/atomic64.h> diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index fed3fd30de7e..ecafbe1718c3 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -8,4 +8,6 @@ #define L1_CACHE_SHIFT 4 #define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT) +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + #endif diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h index e27ad902b1cf..175da06c6b95 100644 --- a/arch/m68k/include/asm/scatterlist.h +++ b/arch/m68k/include/asm/scatterlist.h @@ -1,23 +1,9 @@ #ifndef _M68K_SCATTERLIST_H #define _M68K_SCATTERLIST_H -#include <linux/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - dma_addr_t dma_address; /* A place to hang host-specific addresses at. */ -}; +#include <asm-generic/scatterlist.h> /* This is bogus and should go away. */ #define ISA_DMA_THRESHOLD (0x00ffffff) -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 35d786fe93ae..dc4a8900cc80 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1 +1,3 @@ #include <asm-generic/scatterlist.h> + +#define ISA_DMA_THRESHOLD (~0UL) diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h index 83d69fe17c9f..9af65e79be36 100644 --- a/arch/mips/include/asm/scatterlist.h +++ b/arch/mips/include/asm/scatterlist.h @@ -1,27 +1,7 @@ #ifndef __ASM_SCATTERLIST_H #define __ASM_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x00ffffffUL) diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h index 67535901b9ff..7bd00b9e030d 100644 --- a/arch/mn10300/include/asm/scatterlist.h +++ b/arch/mn10300/include/asm/scatterlist.h @@ -11,45 +11,8 @@ #ifndef _ASM_SCATTERLIST_H #define _ASM_SCATTERLIST_H -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_page(virt_to_page(some_ptr)); - * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x00ffffff) -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* _ASM_SCATTERLIST_H */ diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9c4da3d63bfb..05a366a5c4d5 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -98,6 +98,9 @@ config STACKTRACE_SUPPORT config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config ISA_DMA_API bool diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h index 62269b31ebf4..2c3b79b54b28 100644 --- a/arch/parisc/include/asm/scatterlist.h +++ b/arch/parisc/include/asm/scatterlist.h @@ -3,25 +3,9 @@ #include <asm/page.h> #include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - - unsigned int length; - - /* an IOVA can be 64-bits on some PA-Risc platforms. */ - dma_addr_t iova; /* I/O Virtual Address */ - __u32 iova_length; /* bytes mapped */ -}; - -#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg)) -#define sg_dma_address(sg) ((sg)->iova) -#define sg_dma_len(sg) ((sg)->iova_length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) +#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg)) #endif /* _ASM_PARISC_SCATTERLIST_H */ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c4c4549c22bb..66a315e06dce 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -663,6 +663,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool (PPC64 || NOT_COHERENT_CACHE) +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool depends on PPC64 || POWER4 || 6xx && !CPM2 diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h index 912bf597870f..34cc78fd0ef4 100644 --- a/arch/powerpc/include/asm/scatterlist.h +++ b/arch/powerpc/include/asm/scatterlist.h @@ -9,38 +9,12 @@ * 2 of the License, or (at your option) any later version. */ -#ifdef __KERNEL__ -#include <linux/types.h> #include <asm/dma.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - /* For TCE or SWIOTLB support */ - dma_addr_t dma_address; - u32 dma_length; -}; - -/* - * These macros should be used after a dma_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->dma_length) +#include <asm-generic/scatterlist.h> #ifdef __powerpc64__ #define ISA_DMA_THRESHOLD (~0UL) #endif - #define ARCH_HAS_SG_CHAIN -#endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 4ff4da2c238b..e7fe218b8697 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -39,8 +39,8 @@ struct dma_map_ops swiotlb_dma_ops = { .dma_supported = swiotlb_dma_supported, .map_page = swiotlb_map_page, .unmap_page = swiotlb_unmap_page, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .mapping_error = swiotlb_dma_mapping_error, diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 6c1df5757cd6..8d1de6f31d5a 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -127,11 +127,11 @@ static inline void dma_direct_sync_sg(struct device *dev, __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); } -static inline void dma_direct_sync_single_range(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline void dma_direct_sync_single(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) { - __dma_sync(bus_to_virt(dma_handle+offset), size, direction); + __dma_sync(bus_to_virt(dma_handle), size, direction); } #endif @@ -144,8 +144,8 @@ struct dma_map_ops dma_direct_ops = { .map_page = dma_direct_map_page, .unmap_page = dma_direct_unmap_page, #ifdef CONFIG_NOT_COHERENT_CACHE - .sync_single_range_for_cpu = dma_direct_sync_single_range, - .sync_single_range_for_device = dma_direct_sync_single_range, + .sync_single_for_cpu = dma_direct_sync_single, + .sync_single_for_device = dma_direct_sync_single, .sync_sg_for_cpu = dma_direct_sync_sg, .sync_sg_for_device = dma_direct_sync_sg, #endif diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 6a1fde0d22b0..cd37e49e7034 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1,6 +1,15 @@ /* * Freescale MPC85xx/MPC86xx RapidIO support * + * Copyright 2009 Sysgo AG + * Thomas Moll <thomas.moll@sysgo.com> + * - fixed maintenance access routines, check for aligned access + * + * Copyright 2009 Integrated Device Technology, Inc. + * Alex Bounine <alexandre.bounine@idt.com> + * - Added Port-Write message handling + * - Added Machine Check exception handling + * * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. * Zhang Wei <wei.zhang@freescale.com> * @@ -24,19 +33,30 @@ #include <linux/of_platform.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/kfifo.h> #include <asm/io.h> +#include <asm/machdep.h> +#include <asm/uaccess.h> + +#undef DEBUG_PW /* Port-Write debugging */ /* RapidIO definition irq, which read from OF-tree */ #define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq) #define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq) #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) +#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_P_MSG_REGS_OFFSET 0x11000 #define RIO_S_MSG_REGS_OFFSET 0x13000 #define RIO_ESCSR 0x158 #define RIO_CCSR 0x15c +#define RIO_LTLEDCSR 0x0608 +#define RIO_LTLEDCSR_IER 0x80000000 +#define RIO_LTLEDCSR_PRT 0x01000000 +#define RIO_LTLEECSR 0x060c +#define RIO_EPWISR 0x10010 #define RIO_ISR_AACR 0x10120 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ #define RIO_MAINT_WIN_SIZE 0x400000 @@ -55,6 +75,18 @@ #define RIO_MSG_ISR_QFI 0x00000010 #define RIO_MSG_ISR_DIQI 0x00000001 +#define RIO_IPWMR_SEN 0x00100000 +#define RIO_IPWMR_QFIE 0x00000100 +#define RIO_IPWMR_EIE 0x00000020 +#define RIO_IPWMR_CQ 0x00000002 +#define RIO_IPWMR_PWE 0x00000001 + +#define RIO_IPWSR_QF 0x00100000 +#define RIO_IPWSR_TE 0x00000080 +#define RIO_IPWSR_QFI 0x00000010 +#define RIO_IPWSR_PWD 0x00000008 +#define RIO_IPWSR_PWB 0x00000004 + #define RIO_MSG_DESC_SIZE 32 #define RIO_MSG_BUFFER_SIZE 4096 #define RIO_MIN_TX_RING_SIZE 2 @@ -121,7 +153,7 @@ struct rio_msg_regs { u32 pad10[26]; u32 pwmr; u32 pwsr; - u32 pad11; + u32 epwqbar; u32 pwqbar; }; @@ -160,6 +192,14 @@ struct rio_msg_rx_ring { void *dev_id; }; +struct rio_port_write_msg { + void *virt; + dma_addr_t phys; + u32 msg_count; + u32 err_count; + u32 discard_count; +}; + struct rio_priv { struct device *dev; void __iomem *regs_win; @@ -172,11 +212,64 @@ struct rio_priv { struct rio_dbell_ring dbell_ring; struct rio_msg_tx_ring msg_tx_ring; struct rio_msg_rx_ring msg_rx_ring; + struct rio_port_write_msg port_write_msg; int bellirq; int txirq; int rxirq; + int pwirq; + struct work_struct pw_work; + struct kfifo pw_fifo; + spinlock_t pw_fifo_lock; }; +#define __fsl_read_rio_config(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2)\n" \ + " eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %1,-1\n" \ + " li %0,%3\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +static void __iomem *rio_regs_win; + +static int (*saved_mcheck_exception)(struct pt_regs *regs); + +static int fsl_rio_mcheck_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *entry = NULL; + unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK); + + if (reason & MCSR_BUS_RBERR) { + reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); + if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { + /* Check if we are prepared to handle this fault */ + entry = search_exception_tables(regs->nip); + if (entry) { + pr_debug("RIO: %s - MC Exception handled\n", + __func__); + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), + 0); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + } + } + + if (saved_mcheck_exception) + return saved_mcheck_exception(regs); + else + return cur_cpu_spec->machine_check(regs); +} + /** * fsl_rio_doorbell_send - Send a MPC85xx doorbell message * @mport: RapidIO master port info @@ -277,27 +370,44 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, { struct rio_priv *priv = mport->priv; u8 *data; + u32 rval, err = 0; pr_debug ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", index, destid, hopcount, offset, len); + + /* 16MB maintenance window possible */ + /* allow only aligned access to maintenance registers */ + if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) + return -EINVAL; + out_be32(&priv->maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + (destid << 22) | (hopcount << 12) | (offset >> 12)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); - data = (u8 *) priv->maint_win + offset; + data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { case 1: - *val = in_8((u8 *) data); + __fsl_read_rio_config(rval, data, err, "lbz"); break; case 2: - *val = in_be16((u16 *) data); + __fsl_read_rio_config(rval, data, err, "lhz"); break; - default: - *val = in_be32((u32 *) data); + case 4: + __fsl_read_rio_config(rval, data, err, "lwz"); break; + default: + return -EINVAL; } - return 0; + if (err) { + pr_debug("RIO: cfg_read error %d for %x:%x:%x\n", + err, destid, hopcount, offset); + } + + *val = rval; + + return err; } /** @@ -322,10 +432,17 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, pr_debug ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", index, destid, hopcount, offset, len, val); + + /* 16MB maintenance windows possible */ + /* allow only aligned access to maintenance registers */ + if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) + return -EINVAL; + out_be32(&priv->maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + (destid << 22) | (hopcount << 12) | (offset >> 12)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); - data = (u8 *) priv->maint_win + offset; + data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { case 1: out_8((u8 *) data, val); @@ -333,9 +450,11 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, case 2: out_be16((u16 *) data, val); break; - default: + case 4: out_be32((u32 *) data, val); break; + default: + return -EINVAL; } return 0; @@ -930,6 +1049,223 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) return rc; } +/** + * fsl_rio_port_write_handler - MPC85xx port write interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles port write interrupts. Parses a list of registered + * port write event handlers and executes a matching event handler. + */ +static irqreturn_t +fsl_rio_port_write_handler(int irq, void *dev_instance) +{ + u32 ipwmr, ipwsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + struct rio_priv *priv = port->priv; + u32 epwisr, tmp; + + ipwmr = in_be32(&priv->msg_regs->pwmr); + ipwsr = in_be32(&priv->msg_regs->pwsr); + + epwisr = in_be32(priv->regs_win + RIO_EPWISR); + if (epwisr & 0x80000000) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_info("RIO_LTLEDCSR = 0x%x\n", tmp); + out_be32(priv->regs_win + RIO_LTLEDCSR, 0); + } + + if (!(epwisr & 0x00000001)) + return IRQ_HANDLED; + +#ifdef DEBUG_PW + pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr); + if (ipwsr & RIO_IPWSR_QF) + pr_debug(" QF"); + if (ipwsr & RIO_IPWSR_TE) + pr_debug(" TE"); + if (ipwsr & RIO_IPWSR_QFI) + pr_debug(" QFI"); + if (ipwsr & RIO_IPWSR_PWD) + pr_debug(" PWD"); + if (ipwsr & RIO_IPWSR_PWB) + pr_debug(" PWB"); + pr_debug(" )\n"); +#endif + out_be32(&priv->msg_regs->pwsr, + ipwsr & (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); + + if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) { + priv->port_write_msg.err_count++; + pr_info("RIO: Port-Write Transaction Err (%d)\n", + priv->port_write_msg.err_count); + } + if (ipwsr & RIO_IPWSR_PWD) { + priv->port_write_msg.discard_count++; + pr_info("RIO: Port Discarded Port-Write Msg(s) (%d)\n", + priv->port_write_msg.discard_count); + } + + /* Schedule deferred processing if PW was received */ + if (ipwsr & RIO_IPWSR_QFI) { + /* Save PW message (if there is room in FIFO), + * otherwise discard it. + */ + if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) { + priv->port_write_msg.msg_count++; + kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt, + RIO_PW_MSG_SIZE); + } else { + priv->port_write_msg.discard_count++; + pr_info("RIO: ISR Discarded Port-Write Msg(s) (%d)\n", + priv->port_write_msg.discard_count); + } + schedule_work(&priv->pw_work); + } + + /* Issue Clear Queue command. This allows another + * port-write to be received. + */ + out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ); + + return IRQ_HANDLED; +} + +static void fsl_pw_dpc(struct work_struct *work) +{ + struct rio_priv *priv = container_of(work, struct rio_priv, pw_work); + unsigned long flags; + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; + + /* + * Process port-write messages + */ + spin_lock_irqsave(&priv->pw_fifo_lock, flags); + while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer, + RIO_PW_MSG_SIZE)) { + /* Process one message */ + spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) { + if ((i%4) == 0) + pr_debug("\n0x%02x: 0x%08x", i*4, + msg_buffer[i]); + else + pr_debug(" 0x%08x", msg_buffer[i]); + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + spin_lock_irqsave(&priv->pw_fifo_lock, flags); + } + spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); +} + +/** + * fsl_rio_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +static int fsl_rio_pw_enable(struct rio_mport *mport, int enable) +{ + struct rio_priv *priv = mport->priv; + u32 rval; + + rval = in_be32(&priv->msg_regs->pwmr); + + if (enable) + rval |= RIO_IPWMR_PWE; + else + rval &= ~RIO_IPWMR_PWE; + + out_be32(&priv->msg_regs->pwmr, rval); + + return 0; +} + +/** + * fsl_rio_port_write_init - MPC85xx port write interface init + * @mport: Master port implementing the port write unit + * + * Initializes port write unit hardware and DMA buffer + * ring. Called from fsl_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int fsl_rio_port_write_init(struct rio_mport *mport) +{ + struct rio_priv *priv = mport->priv; + int rc = 0; + + /* Following configurations require a disabled port write controller */ + out_be32(&priv->msg_regs->pwmr, + in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE); + + /* Initialize port write */ + priv->port_write_msg.virt = dma_alloc_coherent(priv->dev, + RIO_PW_MSG_SIZE, + &priv->port_write_msg.phys, GFP_KERNEL); + if (!priv->port_write_msg.virt) { + pr_err("RIO: unable allocate port write queue\n"); + return -ENOMEM; + } + + priv->port_write_msg.err_count = 0; + priv->port_write_msg.discard_count = 0; + + /* Point dequeue/enqueue pointers at first entry */ + out_be32(&priv->msg_regs->epwqbar, 0); + out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys); + + pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n", + in_be32(&priv->msg_regs->epwqbar), + in_be32(&priv->msg_regs->pwqbar)); + + /* Clear interrupt status IPWSR */ + out_be32(&priv->msg_regs->pwsr, + (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); + + /* Configure port write contoller for snooping enable all reporting, + clear queue full */ + out_be32(&priv->msg_regs->pwmr, + RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ); + + + /* Hook up port-write handler */ + rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0, + "port-write", (void *)mport); + if (rc < 0) { + pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); + goto err_out; + } + + INIT_WORK(&priv->pw_work, fsl_pw_dpc); + spin_lock_init(&priv->pw_fifo_lock); + if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + pr_err("FIFO allocation failed\n"); + rc = -ENOMEM; + goto err_out_irq; + } + + pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n", + in_be32(&priv->msg_regs->pwmr), + in_be32(&priv->msg_regs->pwsr)); + + return rc; + +err_out_irq: + free_irq(IRQ_RIO_PW(mport), (void *)mport); +err_out: + dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE, + priv->port_write_msg.virt, + priv->port_write_msg.phys); + return rc; +} + static char *cmdline = NULL; static int fsl_rio_get_hdid(int index) @@ -1057,7 +1393,7 @@ int fsl_rio_setup(struct of_device *dev) dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n", law_start, law_size); - ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); if (!ops) { rc = -ENOMEM; goto err_ops; @@ -1067,6 +1403,7 @@ int fsl_rio_setup(struct of_device *dev) ops->cread = fsl_rio_config_read; ops->cwrite = fsl_rio_config_write; ops->dsend = fsl_rio_doorbell_send; + ops->pwenable = fsl_rio_pw_enable; port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); if (!port) { @@ -1089,11 +1426,12 @@ int fsl_rio_setup(struct of_device *dev) port->iores.flags = IORESOURCE_MEM; port->iores.name = "rio_io_win"; + priv->pwirq = irq_of_parse_and_map(dev->node, 0); priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2); priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3); priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4); - dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq, - priv->txirq, priv->rxirq); + dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n", + priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq); rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); @@ -1109,6 +1447,7 @@ int fsl_rio_setup(struct of_device *dev) rio_register_mport(port); priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); + rio_regs_win = priv->regs_win; /* Probe the master port phy type */ ccsr = in_be32(priv->regs_win + RIO_CCSR); @@ -1166,7 +1505,8 @@ int fsl_rio_setup(struct of_device *dev) /* Configure maintenance transaction window */ out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12); - out_be32(&priv->maint_atmu_regs->rowar, 0x80077015); /* 4M */ + out_be32(&priv->maint_atmu_regs->rowar, + 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE); @@ -1175,6 +1515,12 @@ int fsl_rio_setup(struct of_device *dev) (law_start + RIO_MAINT_WIN_SIZE) >> 12); out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */ fsl_rio_doorbell_init(port); + fsl_rio_port_write_init(port); + + saved_mcheck_exception = ppc_md.machine_check_exception; + ppc_md.machine_check_exception = fsl_rio_mcheck_exception; + /* Ensure that RFXE is set */ + mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000)); return 0; err: diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h index 35d786fe93ae..be44d94cba54 100644 --- a/arch/s390/include/asm/scatterlist.h +++ b/arch/s390/include/asm/scatterlist.h @@ -1 +1,3 @@ +#define ISA_DMA_THRESHOLD (~0UL) + #include <asm-generic/scatterlist.h> diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index e4d98de83dd8..541053ed234e 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -944,21 +944,21 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; struct s390_idle_data *idle; + int err = 0; switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: idle = &per_cpu(s390_idle, cpu); memset(idle, 0, sizeof(struct s390_idle_data)); - if (sysfs_create_group(&s->kobj, &cpu_online_attr_group)) - return NOTIFY_BAD; + err = sysfs_create_group(&s->kobj, &cpu_online_attr_group); break; case CPU_DEAD: case CPU_DEAD_FROZEN: sysfs_remove_group(&s->kobj, &cpu_online_attr_group); break; } - return NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __cpuinitdata smp_cpu_nb = { diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h index 9f533b8362c7..4fa1a6658215 100644 --- a/arch/score/include/asm/scatterlist.h +++ b/arch/score/include/asm/scatterlist.h @@ -1,6 +1,8 @@ #ifndef _ASM_SCORE_SCATTERLIST_H #define _ASM_SCORE_SCATTERLIST_H +#define ISA_DMA_THRESHOLD (~0UL) + #include <asm-generic/scatterlist.h> #endif /* _ASM_SCORE_SCATTERLIST_H */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0e318c905eea..c5ee4ce60b57 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -186,6 +186,9 @@ config DMA_NONCOHERENT config NEED_DMA_MAP_STATE def_bool DMA_NONCOHERENT +config NEED_SG_DMA_LENGTH + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index d4104ce9fe53..6c4bbba2a675 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -436,29 +436,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(struct pt_dspregs), (const void __user *)data); #endif -#ifdef CONFIG_BINFMT_ELF_FDPIC - case PTRACE_GETFDPIC: { - unsigned long tmp = 0; - - switch (addr) { - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = 0; - if (put_user(tmp, datap)) { - ret = -EFAULT; - break; - } - break; - } -#endif default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index d6781ce687e2..6f1470baa314 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -133,6 +133,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool default y if SPARC32 diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h index d1120257b033..433e45f05fd4 100644 --- a/arch/sparc/include/asm/scatterlist.h +++ b/arch/sparc/include/asm/scatterlist.h @@ -1,8 +1,9 @@ #ifndef _SPARC_SCATTERLIST_H #define _SPARC_SCATTERLIST_H -#define sg_dma_len(sg) ((sg)->dma_length) - #include <asm-generic/scatterlist.h> +#define ISA_DMA_THRESHOLD (~0UL) +#define ARCH_HAS_SG_CHAIN + #endif /* !(_SPARC_SCATTERLIST_H) */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e0c619c55b4e..dcb0593b4a66 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -109,6 +109,9 @@ config SBUS config NEED_DMA_MAP_STATE def_bool (X86_64 || DMAR || DMA_API_DEBUG) +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA def_bool y @@ -1703,6 +1706,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA +config USE_PERCPU_NUMA_NODE_ID + def_bool X86_64 + depends on NUMA + menu "Power management and ACPI options" config ARCH_HIBERNATION_HEADER diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h index 75af592677ec..fb0b1874396f 100644 --- a/arch/x86/include/asm/scatterlist.h +++ b/arch/x86/include/asm/scatterlist.h @@ -1,8 +1,9 @@ #ifndef _ASM_X86_SCATTERLIST_H #define _ASM_X86_SCATTERLIST_H -#define ISA_DMA_THRESHOLD (0x00ffffff) - #include <asm-generic/scatterlist.h> +#define ISA_DMA_THRESHOLD (0x00ffffff) +#define ARCH_HAS_SG_CHAIN + #endif /* _ASM_X86_SCATTERLIST_H */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index c5087d796587..21899cc31e52 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -53,33 +53,29 @@ extern int cpu_to_node_map[]; /* Returns the number of the node containing CPU 'cpu' */ -static inline int cpu_to_node(int cpu) +static inline int __cpu_to_node(int cpu) { return cpu_to_node_map[cpu]; } -#define early_cpu_to_node(cpu) cpu_to_node(cpu) +#define early_cpu_to_node __cpu_to_node +#define cpu_to_node __cpu_to_node #else /* CONFIG_X86_64 */ /* Mappings between logical cpu number and node number */ DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); -/* Returns the number of the current Node. */ -DECLARE_PER_CPU(int, node_number); -#define numa_node_id() percpu_read(node_number) - #ifdef CONFIG_DEBUG_PER_CPU_MAPS -extern int cpu_to_node(int cpu); +/* + * override generic percpu implementation of cpu_to_node + */ +extern int __cpu_to_node(int cpu); +#define cpu_to_node __cpu_to_node + extern int early_cpu_to_node(int cpu); #else /* !CONFIG_DEBUG_PER_CPU_MAPS */ -/* Returns the number of the node containing CPU 'cpu' */ -static inline int cpu_to_node(int cpu) -{ - return per_cpu(x86_cpu_to_node_map, cpu); -} - /* Same function but used if called before per_cpu areas are setup */ static inline int early_cpu_to_node(int cpu) { @@ -170,6 +166,10 @@ static inline int numa_node_id(void) { return 0; } +/* + * indicate override: + */ +#define numa_node_id numa_node_id static inline int early_cpu_to_node(int cpu) { diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index cc83a002786e..68e4a6f2211e 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1121,9 +1121,9 @@ void __cpuinit cpu_init(void) oist = &per_cpu(orig_ist, cpu); #ifdef CONFIG_NUMA - if (cpu != 0 && percpu_read(node_number) == 0 && - cpu_to_node(cpu) != NUMA_NO_NODE) - percpu_write(node_number, cpu_to_node(cpu)); + if (cpu != 0 && percpu_read(numa_node) == 0 && + early_cpu_to_node(cpu) != NUMA_NO_NODE) + set_numa_node(early_cpu_to_node(cpu)); #endif me = current; diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 81c499eceb21..e1a0a3bf9716 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -190,7 +190,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb, mutex_unlock(&therm_cpu_lock); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata = diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 8b862d5900fe..1b7b31ab7d86 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -170,7 +170,7 @@ static int __cpuinit cpuid_class_cpu_callback(struct notifier_block *nfb, cpuid_device_destroy(cpu); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __refdata cpuid_class_cpu_notifier = diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 4d4468e9f47c..7bf2dc4c8f70 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -230,7 +230,7 @@ static int __cpuinit msr_class_cpu_callback(struct notifier_block *nfb, msr_device_destroy(cpu); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __refdata msr_class_cpu_notifier = { diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 7d2829dde20e..a5bc528d4328 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -31,8 +31,6 @@ static struct dma_map_ops swiotlb_dma_ops = { .free_coherent = swiotlb_free_coherent, .sync_single_for_cpu = swiotlb_sync_single_for_cpu, .sync_single_for_device = swiotlb_sync_single_for_device, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .map_sg = swiotlb_map_sg_attrs, diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index ef6370b00e70..a867940a6dfc 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -265,10 +265,10 @@ void __init setup_per_cpu_areas(void) #if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) /* - * make sure boot cpu node_number is right, when boot cpu is on the + * make sure boot cpu numa_node is right, when boot cpu is on the * node that doesn't have mem installed */ - per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id); + set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id)); #endif /* Setup node to cpumask map */ diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 550df481accd..10c27bb1e95f 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -2,6 +2,7 @@ #include <linux/topology.h> #include <linux/module.h> #include <linux/bootmem.h> +#include <linux/random.h> #ifdef CONFIG_DEBUG_PER_CPU_MAPS # define DBG(x...) printk(KERN_DEBUG x) @@ -65,3 +66,19 @@ const struct cpumask *cpumask_of_node(int node) } EXPORT_SYMBOL(cpumask_of_node); #endif + +/* + * Return the bit number of a random bit set in the nodemask. + * (returns -1 if nodemask is empty) + */ +int __node_random(const nodemask_t *maskp) +{ + int w, bit = -1; + + w = nodes_weight(*maskp); + if (w) + bit = bitmap_ord_to_pos(maskp->bits, + get_random_int() % w, MAX_NUMNODES); + return bit; +} +EXPORT_SYMBOL(__node_random); diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 8948f47fde05..a7bcc23ef96c 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -33,9 +33,6 @@ int numa_off __initdata; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; -DEFINE_PER_CPU(int, node_number) = 0; -EXPORT_PER_CPU_SYMBOL(node_number); - /* * Map cpu index to node index */ @@ -809,7 +806,7 @@ void __cpuinit numa_set_node(int cpu, int node) per_cpu(x86_cpu_to_node_map, cpu) = node; if (node != NUMA_NO_NODE) - per_cpu(node_number, cpu) = node; + set_cpu_numa_node(cpu, node); } void __cpuinit numa_clear_node(int cpu) @@ -867,7 +864,7 @@ void __cpuinit numa_remove_cpu(int cpu) numa_set_cpumask(cpu, 0); } -int cpu_to_node(int cpu) +int __cpu_to_node(int cpu) { if (early_per_cpu_ptr(x86_cpu_to_node_map)) { printk(KERN_WARNING @@ -877,7 +874,7 @@ int cpu_to_node(int cpu) } return per_cpu(x86_cpu_to_node_map, cpu); } -EXPORT_SYMBOL(cpu_to_node); +EXPORT_SYMBOL(__cpu_to_node); /* * Same function as cpu_to_node() but used if called before the diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h index 810080bb0a2b..b1f9fdc1d5ba 100644 --- a/arch/xtensa/include/asm/scatterlist.h +++ b/arch/xtensa/include/asm/scatterlist.h @@ -11,28 +11,7 @@ #ifndef _XTENSA_SCATTERLIST_H #define _XTENSA_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) |