summaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)AuthorFilesLines
2017-08-08maint: Include bug-reporting info in --help outputEric Blake1-1/+3
These days, many programs are including a bug-reporting address, or better yet, a link to the project web site, at the tail of their --help output. However, we were not very consistent at doing so: only qemu-nbd and qemu-qa mentioned anything, with the latter pointing to an individual person instead of the project. Add a new #define that sets up a uniform string, mentioning both bug reporting instructions and overall project details, and which a downstream vendor could tweak if they want bugs to go to a downstream database. Then use it in all of our binaries which have --help output. The canned text intentionally references http:// instead of https:// because our https website currently causes certificate errors in some browsers. That can be tweaked later once we have resolved the web site issued. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20170803163353.19558-5-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-08rcu: completely disable pthread_atfork callbacks as soon as possiblePaolo Bonzini1-0/+1
Because of -daemonize, system mode QEMU sometimes needs to fork() and keep RCU enabled in the child. However, there is a possible deadlock with synchronize_rcu: - the CPU thread is inside a RCU critical section and wants to take the BQL in order to do MMIO - the monitor thread, which is owning the BQL, calls rcu_init_lock which tries to take the rcu_sync_lock - the call_rcu thread has taken rcu_sync_lock in synchronize_rcu, but synchronize_rcu needs the CPU thread to end the critical section before returning. This cannot happen for user-mode emulation, because it does not have a BQL. To fix it, assume that system mode QEMU only forks in preparation for exec (except when daemonizing) and disable pthread_atfork as soon as the double fork has happened. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01char: don't exit on hmp 'chardev-add help'Anton Nefedov1-4/+6
qemu_chr_new_from_opts() is used from both vl.c and hmp, and it is quite confusing to see qemu suddenly exit after receiving a help option in hmp. Do exit(0) from vl.c instead. Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Message-Id: <1500977081-120929-1-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01vl.c/exit: pause cpus before closing block devicesDr. David Alan Gilbert1-1/+1
There's a rare exit seg if the guest is accessing IO during exit. It's always hitting the atomic_inc(&bs->in_flight) with a NULL bs. This was added recently in 99723548 but I don't see it as the cause. Flip vl.c around so we pause the cpus before closing the block devices, that way we shouldn't have anything trying to access them when they're gone. This was originally Red Hat bz https://bugzilla.redhat.com/show_bug.cgi?id=1451015 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reported-by: Cong Li <coli@redhat.com> -- This is a very rare race, I'll leave it running in a loop to see if we hit anything else and to check this really fixes it. I do worry if there are other cases that can trigger this - e.g. hot-unplug or ejecting a CD. Message-Id: <20170713190116.21608-1-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-4/+4
* gdbstub fixes (Alex) * IOMMU MemoryRegion subclass (Alexey) * Chardev hotswap (Anton) * NBD_OPT_GO support (Eric) * Misc bugfixes * DEFINE_PROP_LINK (minus the ARM patches - Fam) * MAINTAINERS updates (Philippe) # gpg: Signature made Fri 14 Jul 2017 11:06:27 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (55 commits) spapr_rng: Convert to DEFINE_PROP_LINK cpu: Convert to DEFINE_PROP_LINK mips_cmgcr: Convert to DEFINE_PROP_LINK ivshmem: Convert to DEFINE_PROP_LINK dimm: Convert to DEFINE_PROP_LINK virtio-crypto: Convert to DEFINE_PROP_LINK virtio-rng: Convert to DEFINE_PROP_LINK virtio-scsi: Convert to DEFINE_PROP_LINK virtio-blk: Convert to DEFINE_PROP_LINK qdev: Add const qualifier to PropertyInfo definitions qmp: Use ObjectProperty.type if present qdev: Introduce DEFINE_PROP_LINK qdev: Introduce PropertyInfo.create qom: enforce readonly nature of link's check callback translate-all: remove redundant !tcg_enabled check in dump_exec_info vl: fix breakage of -tb-size nbd: Implement NBD_INFO_BLOCK_SIZE on client nbd: Implement NBD_INFO_BLOCK_SIZE on server nbd: Implement NBD_OPT_GO on client nbd: Implement NBD_OPT_GO on server ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14vl: fix breakage of -tb-sizeEmilio G. Cota1-4/+4
Commit e7b161d573 ("vl: add tcg_enabled() for tcg related code") adds a check to exit the program when !tcg_enabled() while parsing the -tb-size flag. It turns out that when the -tb-size flag is evaluated, tcg_enabled() can only return 0, since it is set (or not) much later by configure_accelerator(). Fix it by unconditionally exiting if the flag is passed to a QEMU binary built with !CONFIG_TCG. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-13Convert error_report() to warn_report()Alistair Francis1-10/+10
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-10vl: move global property, migrate init earlierPeter Xu1-12/+12
Currently drive_init_func() may call migrate_get_current() while the migrate object is still not ready yet at that time. Move the migration object init earlier, along with the global properties, right after acceleration init. This fixes a breakage for iotest 055, which caused an assertion failure. Reported-by: Max Reitz <mreitz@redhat.com> Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Tested-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Fixes: 3df663 ("migration: move only_migratable to MigrationState") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-3-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-10migration: fix handling for --only-migratablePeter Xu1-1/+1
MigrateState object is not ready at that time, so we'll get an assertion. Use qemu_global_option() instead. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Fixes: 3df663e ("migration: move only_migratable to MigrationState") Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-07-04vl: add tcg_enabled() for tcg related codeYang Zhong1-1/+7
Need to disable the tcg related code in the vl.c if the disable-tcg option is added into ./configure command. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04vl: convert -tb-size to qemu_strtoulPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-28migration: move only_migratable to MigrationStatePeter Xu1-2/+7
One less global variable, and it does only matter with migration. We keep the old "--only-migratable" option, but also now we support: -global migration.only-migratable=true Currently still keep the old interface. Hmm, now vl.c has no way to access migrate_get_current(). Export a function for it to setup only_migratable. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28migration: let MigrationState be a qdevPeter Xu1-0/+6
Let the old man "MigrationState" join the object family. Direct benefit is that we can start to use all the property features derived from current QDev, like: HW_COMPAT_* bits, command line setup for migration parameters (so will never need to set them up each time using HMP/QMP, this is really, really attractive for test writters), etc. I see no reason to disallow this happen yet. So let's start from this one, to see whether it would be anything good. Now we init the MigrationState struct statically in main() to make sure it's initialized after global properties are applied, since we'll use them during creation of the object. No functional change at all. Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28vl: clean up global property registrationPeter Xu1-5/+24
It's not that clear on how the global properties are registered to global_props (and also its priority relationship). Let's provide a single function to be called in main() for that, with comment to explain it a bit. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-4-git-send-email-peterx@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28accel: introduce AccelClass.global_propsPeter Xu1-0/+1
Introduce this new field for the accelerator classes so that each specific accelerator in the future can register its own global properties to be used further by the system. It works just like how the old machine compatible properties do, but only tailored for accelerators. Introduce register_compat_props_array() for it. Export it so that it may be used in other codes as well in the future. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1498536619-14548-3-git-send-email-peterx@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-15vl: Fix broken thread=xxx option of the --accel parameterThomas Huth1-8/+5
Commit bde4d9205 ("Fix the -accel parameter and the documentation for 'hax'") introduced a regression by adding a new local accel_opts variable which shadows the variable with the same name that is declared at the beginning of the main() scope. This causes the qemu_tcg_configure() call later to be always called with NULL, so that the thread=xxx option gets ignored. Fix it by removing the local accel_opts variable and use "opts" instead, which is meant for storing temporary QemuOpts values. And while we're at it, also change the exit(1) here to exit(0) since asking for help is not an error. Fixes: bde4d9205ee9def98852ff6054cdef4efd74e1f8 Reported-by: Markus Armbruster <armbru@redhat.com> Reported-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1496899257-25800-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-13migration: Move remaining exported functions to migration/misc.hJuan Quintela1-1/+0
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: create global_state.cJuan Quintela1-0/+1
It don't belong anywhere else, just the global state where everybody can stick other things. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-05Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into ↵Peter Maydell1-1/+1
staging # gpg: Signature made Fri 02 Jun 2017 20:12:48 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/chrfe-pull-request: char: move char devices to chardev/ char: make chr_fe_deinit() optionaly delete backend char: rename functions that are not part of fe char: move CharBackend handling in char-fe unit char: generalize qemu_chr_write_all() be-hci: use backend functions chardev: serial & parallel declaration to own headers chardev: move headers to include/chardev Remove/replace sysemu/char.h inclusion char-win: close file handle except with console char-win: rename hcom->file char-win: rename win_chr_init/poll win_chr_serial_init/poll char-win: remove WinChardev.len char-win: simplify win_chr_read() char: cast ARRAY_SIZE() as signed to silent warning on empty array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau1-1/+1
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-01migration: Move include/migration/block.h into migration/Juan Quintela1-1/+0
All functions were internal, except blk_mig_init() that is exported in misc.h now. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Export ram.c functions in its own fileJuan Quintela1-0/+1
All functions are internal except for ram_mig_init(). Create migration/misc.h for this kind of functions. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-01migration: Create include for migration snapshotsJuan Quintela1-1/+2
Start removing migration code from sysemu/sysemu.h. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-30Merge remote-tracking branch 'kraxel/tags/pull-usb-20170529-1' into stagingStefan Hajnoczi1-0/+8
usb: depricate legacy options and hmp commands usb: fixes for ehci and hub, split xhci variants # gpg: Signature made Mon 29 May 2017 02:07:17 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-usb-20170529-1: ehci: fix frame timer invocation. usb: don't wakeup during coldplug usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up xhci: add CONFIG_USB_XHCI_NEC option xhci: split into multiple files usb: Simplify the parameter parsing of the legacy usb serial device usb: Deprecate HMP commands usb_add and usb_del usb: Deprecate the legacy -usbdevice option ehci: fix overflow in frame timer code Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-30Merge remote-tracking branch 'armbru/tags/pull-qapi-2017-05-23' into stagingStefan Hajnoczi1-29/+40
QAPI patches for 2017-05-23 # gpg: Signature made Tue 23 May 2017 12:33:32 PM BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * armbru/tags/pull-qapi-2017-05-23: qapi-schema: Remove obsolete note from ObjectTypeInfo block: Use QDict helpers for --force-share shutdown: Expose bool cause in SHUTDOWN and RESET events shutdown: Add source information to SHUTDOWN and RESET shutdown: Preserve shutdown cause through replay shutdown: Prepare for use of an enum in reset/shutdown_request shutdown: Simplify shutdown_signal sockets: Plug memory leak in socket_address_flatten() scripts/qmp/qom-set: fix the value argument passed to srv.command() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-29usb: Deprecate HMP commands usb_add and usb_delThomas Huth1-0/+6
The commands 'device_add' and 'device_del' should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-29usb: Deprecate the legacy -usbdevice optionThomas Huth1-0/+2
The '-usbdevice' option is considered as deprecated nowadays and we might want to remove these options in a future version of QEMU. So mark this options as deprecated in the documenation and print out a warning if it is used to tell the user what to use instead. While we're at it, improve also some other minor USB-related spots in qemu-options.hx that were not up to date anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1495175716-12735-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-23shutdown: Expose bool cause in SHUTDOWN and RESET eventsEric Blake1-4/+4
Libvirt would like to be able to distinguish between a SHUTDOWN event triggered solely by guest request and one triggered by a SIGTERM or other action on the host. While qemu_kill_report() was already able to give different output to stderr based on whether a shutdown was triggered by a host signal (but NOT by a host UI event, such as clicking the X on the window), that information was then lost to management. The previous patches improved things to use an enum throughout all callsites, so now we have something ready to expose through QMP. Note that for now, the decision was to expose ONLY a boolean, rather than promoting ShutdownCause to a QAPI enum; this is because libvirt has not expressed an interest in anything finer-grained. We can still add additional details, in a backwards-compatible manner, if a need later arises (if the addition happens before 2.10, we can replace the bool with an enum; otherwise, the enum will have to be in addition to the bool); this patch merely adds a helper shutdown_caused_by_guest() to map the internal enum into the external boolean. Update expected iotest outputs to match the new data (complete coverage of the affected tests is obtained by -raw, -qcow2, and -nbd). Here is output from 'virsh qemu-monitor-event --loop' with the patch installed: event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true} event STOP at 1492639680.732116 for domain fedora_13: <null> event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false} Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event was triggered by an action I took directly in the guest (shutdown -h), at which point qemu stops the vcpus and waits for libvirt to do any final cleanups; the second SHUTDOWN event is the result of libvirt sending SIGTERM now that it has completed cleanup. Libvirt is already smart enough to only feed the first qemu SHUTDOWN event to the end user (remember, virsh qemu-monitor-event is a low-level debugging interface that is explicitly unsupported by libvirt, so it sees things that normal end users do not); changing qemu to emit SHUTDOWN only once is outside the scope of this series. See also https://bugzilla.redhat.com/1384007 Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170515214114.15442-6-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake1-10/+8
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23shutdown: Preserve shutdown cause through replayEric Blake1-1/+1
With the recent addition of ShutdownCause, we want to be able to pass a cause through any shutdown request, and then faithfully replay that cause when later replaying the same sequence. The easiest way is to expand the reply event mechanism to track a series of values for EVENT_SHUTDOWN, one corresponding to each value of ShutdownCause. We are free to change the replay stream as needed, since there are already no guarantees about being able to use a replay stream by any other version of qemu than the one that generated it. The cause is not actually fed back until the next patch changes the signature for requesting a shutdown; a TODO marks that upcoming change. Yes, this uses the gcc/clang extension of a ranged case label, but this is not the first time we've used non-C99 constructs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170515214114.15442-4-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23shutdown: Prepare for use of an enum in reset/shutdown_requestEric Blake1-20/+33
We want to track why a guest was shutdown; in particular, being able to tell the difference between a guest request (such as ACPI request) and host request (such as SIGINT) will prove useful to libvirt. Since all requests eventually end up changing shutdown_requested in vl.c, the logical change is to make that value track the reason, rather than its current 0/1 contents. Since command-line options control whether a reset request is turned into a shutdown request instead, the same treatment is given to reset_requested. This patch adds an internal enum ShutdownCause that describes reasons that a shutdown can be requested, and changes qemu_system_reset() to pass the reason through, although for now nothing is actually changed with regards to what gets reported. The enum could be exported via QAPI at a later date, if deemed necessary, but for now, there has not been a request to expose that much detail to end clients. For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough information right now to use a different value is when we are reacting to a host signal. It will take a further patch to edit all call-sites that can trigger a reset or shutdown request to properly pass in any other reasons; this patch includes TODOs to point such places out. qemu_system_reset() trades its 'bool report' parameter for a 'ShutdownCause reason', with all non-zero values having the same effect; this lets us get rid of the weird #defines for VMRESET_* as synonyms for bools. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20170515214114.15442-3-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23shutdown: Simplify shutdown_signalEric Blake1-3/+3
There is no signal 0 (kill(pid, 0) has special semantics to probe whether a process is alive), rather than actually sending a signal 0). So we can use the simpler 0, instead of -1, for our sentinel of whether a shutdown request due to a signal has happened. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20170515214114.15442-2-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-19Merge remote-tracking branch 'kraxel/tags/pull-audio-20170519-1' into stagingStefan Hajnoczi1-1/+2
audio: move & rename soundhw init code. # gpg: Signature made Fri 19 May 2017 12:22:51 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-audio-20170519-1: audio: Rename hw/audio/audio.h to hw/audio/soundhw.h audio: Rename audio_init() to soundhw_init() audio: Move arch_init audio code to hw/audio/soundhw.c Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-19audio: Rename hw/audio/audio.h to hw/audio/soundhw.hEduardo Habkost1-1/+1
All the functions in hw/audio/audio.h are called "soundhw_*()" and live in hw/audio/audiohw.c. Rename the header file for consistency. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 20170508205735.23444-4-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19audio: Rename audio_init() to soundhw_init()Eduardo Habkost1-1/+1
To make it consistent with the remaining soundhw.c functions and avoid confusion with the audio_init() function in audio/audio.c, rename audio_init() to soundhw_init(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20170508205735.23444-3-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19audio: Move arch_init audio code to hw/audio/soundhw.cEduardo Habkost1-0/+1
There's no reason to keep the soundhw table in arch_init.c. Move that code to a new hw/audio/soundhw.c file. While moving the code, trivial coding style issues were fixed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170508205735.23444-2-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19ui: egl-headless requires dmabuf supportGerd Hoffmann1-2/+2
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170517122744.3541-1-kraxel@redhat.com
2017-05-17migration: Pass Error ** argument to {save,load}_vmstateJuan Quintela1-1/+3
This way we use the "normal" way of printing errors for hmp commands. Signed-off-by: Juan Quintela <quintela@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-05-15Merge remote-tracking branch 'kraxel/tags/pull-ui-20170512-1' into stagingStefan Hajnoczi1-0/+16
ui: add egl-headless ui: some vnc cleanups ui: absolute events for input-linux # gpg: Signature made Fri 12 May 2017 12:50:07 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-ui-20170512-1: vnc: replace hweight_long() with ctpopl() vnc: simple clean up opengl: add egl-headless display egl: explicitly ask for core context egl-helpers: add missing error check egl-helpers: fix display init for x11 egl-helpers: drop support for gles and debug logging virtio-gpu: move virtio_gpu_gl_block ui: input-linux: Add absolute event support ui: Support non-zero minimum values for absolute input axes Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' ↵Stefan Hajnoczi1-4/+2
into staging x86 and machine queue, 2017-05-11 Highlights: * New "-numa cpu" option * NUMA distance configuration * migration/i386 vmstatification # gpg: Signature made Thu 11 May 2017 08:16:07 PM BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # gpg: Note: This key has expired! # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * ehabkost/tags/x86-and-machine-pull-request: (29 commits) migration/i386: Remove support for pre-0.12 formats vmstatification: i386 FPReg migration/i386: Remove old non-softfloat 64bit FP support tests: check -numa node,cpu=props_list usecase numa: add '-numa cpu,...' option for property based node mapping numa: remove node_cpu bitmaps as they are no longer used numa: use possible_cpus for not mapped CPUs check machine: call machine init from wrapper numa: remove no longer need numa_post_machine_init() tests: numa: add case for QMP command query-cpus QMP: include CpuInstanceProperties into query_cpus output output virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu() spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu() pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu() numa: do default mapping based on possible_cpus instead of node_cpu bitmaps numa: mirror cpu to node mapping in MachineState::possible_cpus numa: add check that board supports cpu_index to node mapping virt-arm: add node-id property to CPU pc: add node-id property to CPU spapr: add node-id property to sPAPR core ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-12opengl: add egl-headless displayGerd Hoffmann1-0/+16
Add egl-headless user interface. It doesn't provide a real user interface, it only provides opengl support using drm render nodes. It will copy back the bits rendered by the guest using virgl back to a DisplaySurface and kick the usual display update code paths, so spice and vnc and screendump can pick it up. Use it this way: qemu -display egl-headless -vnc $display qemu -display egl-headless -spice gl=off,$args Note that you should prefer native spice opengl support (-spice gl=on) if possible because that delivers better performance. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170505104101.30589-7-kraxel@redhat.com
2017-05-11machine: call machine init from wrapperIgor Mammedov1-1/+1
add machine_run_board_init() wrapper that calls machine init for now but in follow up patches it will be used to run generic machine code that should run before machine init. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1494415802-227633-15-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11numa: remove no longer need numa_post_machine_init()Igor Mammedov1-2/+0
CPUState::numa_node is still in use but now it's set by board when it creates CPU objects. So there isn't any need to set it again after all CPU's are created, since it's been already set. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-Id: <1494415802-227633-14-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11numa: move source of default CPUs to NUMA node mapping into boardsIgor Mammedov1-1/+1
Originally CPU threads were by default assigned in round-robin fashion. However it was causing issues in guest since CPU threads from the same socket/core could be placed on different NUMA nodes. Commit fb43b73b (pc: fix default VCPU to NUMA node mapping) fixed it by grouping threads within a socket on the same node introducing cpu_index_to_socket_id() callback and commit 20bb648d (spapr: Fix default NUMA node allocation for threads) reused callback to fix similar issues for SPAPR machine even though socket doesn't make much sense there. As result QEMU ended up having 3 default distribution rules used by 3 targets /virt-arm, spapr, pc/. In effort of moving NUMA mapping for CPUs into possible_cpus, generalize default mapping in numa.c by making boards decide on default mapping and let them explicitly tell generic numa code to which node a CPU thread belongs to by replacing cpu_index_to_socket_id() with @cpu_index_to_instance_props() which provides default node_id assigned by board to specified cpu_index. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-10Merge remote-tracking branch 'mjt/tags/trivial-patches-fetch' into stagingStefan Hajnoczi1-2/+3
trivial patches for 2017-05-10 # gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * mjt/tags/trivial-patches-fetch: (23 commits) tests: Remove redundant assignment MAINTAINERS: Update paths for AioContext implementation MAINTAINERS: Update paths for main loop jazz_led: fix bad snprintf tests: Ignore another built executable (test-hmp) scripts: Switch to more portable Perl shebang scripts/qemu-binfmt-conf.sh: Fix shell portability issue virtfs: allow a device id to be specified in the -virtfs option hw/core/generic-loader: Fix crash when running without CPU virtio-blk: Remove useless condition around g_free() qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip use _Static_assert in QEMU_BUILD_BUG_ON channel-file: fix wrong parameter comments block: Make 'replication_state' an enum util: Use g_malloc/g_free in envlist.c qga: fix compiler warnings (clang 5) device_tree: fix compiler warnings (clang 5) usb-ccid: make ccid_write_data_block() cope with null buffers tests: Ignore more test executables Add 'none' as type for drive's if option ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-10virtfs: allow a device id to be specified in the -virtfs optionChris Webb1-2/+3
When using a virtfs root filesystem, the mount_tag needs to be set to /dev/root. This can be done long-hand as -fsdev local,id=root,path=/path/to/rootfs,... -device virtio-9p-pci,fsdev=root,mount_tag=/dev/root but the -virtfs shortcut cannot be used as it hard-codes the device identifier to match the mount_tag, and device identifiers may not contain '/': $ qemu-system-x86_64 -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough qemu-system-x86_64: -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough: duplicate fsdev id: /dev/root To support this case using -virtfs, we allow the device identifier to be specified explicitly when the mount_tag is not suitable: -virtfs local,id=root,path=/path/to/rootfs,mount_tag=/dev/root,... Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-08Merge remote-tracking branch 'bonzini/tags/for-upstream' into stagingStefan Hajnoczi1-14/+9
A large set of small patches. I have not included yet vhost-user-scsi, but it'll come in the next pull request. * use GDB XML register description for x86 * use _Static_assert in QEMU_BUILD_BUG_ON * add "R:" to MAINTAINERS and get_maintainers * checkpatch improvements * dump threading fixes * first part of vhost-user-scsi support * QemuMutex tracing * vmw_pvscsi and megasas fixes * sgabios module update * use Rev3 (ACPI 2.0) FADT * deprecate -hdachs * improve -accel documentation * hax fix * qemu-char GSource bugfix # gpg: Signature made Fri 05 May 2017 06:10:40 AM EDT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * bonzini/tags/for-upstream: (21 commits) vhost-scsi: create a vhost-scsi-common abstraction libvhost-user: replace vasprintf() to fix build get_maintainer: add subsystem to reviewer output get_maintainer: --r (list reviewer) is on by default get_maintainer: it's '--pattern-depth', not '-pattern-depth' get_maintainer: Teach get_maintainer.pl about the new "R:" tag MAINTAINERS: Add "R:" tag for self-appointed reviewers Fix the -accel parameter and the documentation for 'hax' dump: Acquire BQL around vm_start() in dump thread hax: Fix memory mapping de-duplication logic checkpatch: Disallow glib asserts in main code trace: add qemu mutex lock and unlock trace events vmw_pvscsi: check message ring page count at initialisation sgabios: update for "fix wrong video attrs for int 10h,ah==13h" scsi: avoid an off-by-one error in megasas_mmio_write vl: deprecate the "-hdachs" option use _Static_assert in QEMU_BUILD_BUG_ON target/i386: Add GDB XML register description support char: Fix removing wrong GSource that be found by fd_in_tag hw/i386: Build-time assertion on pc/q35 reset register being identical. ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-05Merge remote-tracking branch 'elmarco/tags/chr-tests-pull-request' into stagingStefan Hajnoczi1-0/+1
# gpg: Signature made Thu 04 May 2017 12:42:10 PM BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * elmarco/tags/chr-tests-pull-request: (21 commits) tests: add /char/console test tests: add /char/udp test tests: add /char/socket test tests: add /char/file test tests: add /char/pipe test tests: add alias check in /char/ringbuf char-udp: flush as much buffer as possible char-socket: add 'connected' property char-socket: add 'addr' property char-socket: update local address after listen char-socket: introduce update_disconnected_filename() char: useless NULL check char: remove chardevs list char: remove qemu_chardev_add char: use /chardevs container instead of chardevs list vl: add todo note about root container cleanup char: add a /chardevs container container: don't leak container reference xen: use a better chardev type check mux: simplfy muxes_realize_done ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-05Fix the -accel parameter and the documentation for 'hax'Thomas Huth1-14/+9
Since 'hax' is a possible accelerator nowadays, too, the '-accel' option should support it and we should mention this accelerator in the documentation, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493875481-16388-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05vl: deprecate the "-hdachs" optionThomas Huth1-0/+2
If the user needs to specify the disk geometry, the corresponding parameters of the "-device ide-hd" option should be used instead. "-hdachs" is considered as deprecated and might be removed soon. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1493270454-1448-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 19:59:08 +0000