| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Only some callers of tcp_chr_new_client are putting the
socket client into non-blocking mode. Move the call to
qio_channel_set_blocking() into the tcp_chr_new_client
method to guarantee that all code paths set non-blocking
mode
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1458324041-22709-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some of the chardev I/O paths really want to write the
complete data buffer even though the channel is in
non-blocking mode. To achieve this they look for EAGAIN
and g_usleep() for 100ms. Unfortunately the code is set
to check errno == EAGAIN a second time, after the g_usleep()
call has completed. On OS-X at least, g_usleep clobbers
errno to ETIMEDOUT, causing the retry to be skipped.
This failure to retry means the full data isn't written
to the chardev backend, which causes various failures
including making the tests/ahci-test qtest hang.
Rather than playing games trying to reset errno just
simplify the code to use a goto to retry instead of a
a loop.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1459438168-8146-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Caller of CharDriverState.chr* callback assume errno error conventions.
Translate QIOChannel error to errno (this fixes potential EAGAIN
regression, for ex if a vhost-user backend block, qemu_chr_fe_read_all()
could get error -2 and not wait)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1457718924-19338-1-git-send-email-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Replace bdrv_commmit_all() and bdrv_flush_all() by their BlockBackend
equivalents.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP>
[Add stubs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
During CHR_EVENT_CLOSED, the function could be reentered, make this
case safe.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Disconnect should reset context.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If tcp_set_msgfds() is called several time with NULL fds, this
could lead to double-free.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The qemu_chr_open_socket_fd method takes care of either doing a
synchronous socket connect, or creating a listener socket. Part
of the work when creating the listener socket is to register a
watch for incoming clients. The caller of qemu_chr_open_socket_fd
may not want this watch created, as it might be doing a synchronous
wait for the first client. Rather than passing yet more parameters
into qemu_chr_open_socket_fd to let it handle this, just remove
the qemu_chr_open_socket_fd method an inline its functionality
into the caller. This allows for a clearer control flow and shorter
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
The qemu_chr_open_socket_fd() method multiplexes three different
actions into one method. The socket_try_connect() method is one
of its callers, but it only ever want one specific action
performed. By inlining that action into socket_try_connect()
we see that there is not in fact any failure scenario, so there
is not even any reason for socket_try_connect to exist. Just
inline the asynchronous connection attempts directly at the
places that need them. This shortens & clarifies the code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
The qemu_chr_finish_socket_connection method is multiplexing two
different actions into one method. Each caller of it though, only
wants one specific action. The code is shorter & clearer if we
thus remove the method and just inline the specific actions
where needed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
Commit d0d7708b made ChardevDummy be an empty wrapper type around
ChardevCommon. But there is no technical reason for this indirection,
so simplify the code by directly using the base type.
Also change the fallback assignment to assign u.null rather than
u.data, since a future patch will remove the data member of the C
struct generated for QAPI unions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1457106160-23614-1-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
An upcoming patch will alter how simple unions, like SocketAddress,
are laid out, which will impact all lines of the form 'addr->u.XXX'
(expanding it to the longer 'addr->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a SocketAddress. Also, take advantage of some C99 initialization where
it makes sense (simplifying g_new0() to g_new()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
An upcoming patch will alter how simple unions, like ChardevBackend,
are laid out, which will impact all lines of the form 'backend->u.XXX'
(expanding it to the longer 'backend->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a ChardevBackend. It doesn't hurt that this also makes the code more
consistent: some clients touched here already had a temporary variable
but weren't using it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-By: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1457021813-10704-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Commit d0d7708b forgot to parse logging for spice chardevs and
virtual consoles. This requires making qemu_chr_parse_common()
non-static. While at it, use a temporary variable to make the
code shorter, as well as reduce the churn when a later patch
alters the layout of simple unions.
Signed-off-by: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455927587-28033-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If io_channel_send_full gets QIO_CHANNEL_ERR_BLOCK it
and has already sent some of the data, it should return
that amount of data, not EAGAIN, as that would cause
the caller to re-try already sent data.
Unfortunately due to a previous rebase conflict resolution
error, the code for dealing with this was in the wrong
part of the conditional, and so mistakenly ran on other
I/O errors.
This be seen running
qemu-system-x86_64 -monitor stdio
and entering 'info mtree', when running on a slow console
(eg a slow remote ssh session). The monitor would get into
an indefinite loop writing the same data until it managed
to send it all without getting EAGAIN.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455288410-27046-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
closed"
This reverts commit 34689e206abddac87a5217d458534e24f2a05562.
Marc-André Lureau provided the following commentary: "It looks like if
a the slave is opened, then Linux will buffer the master writes, up to
a few kb and then throttle, so it's not entirely blocked but eventually
the guest VM dies. However, not having any slave open it will simply let
the write go and discard the data. At least, virt-install configures
a pty for the serial but viewers like virt-manager do not necessarily
open it. And, if there are no viewers, it will just hang. If qemu
starts reading all the data from the slave, I don't think interactions
with other slaves will work. I don't see much options but to close the
slave, thus reverting this patch."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The BSD impl of qemu_chr_open_pp_fd had mis-declared
its parameter type as ChardevBackend instead of
ChardevCommon. It had also mistakenly used the variable
name 'common' instead of 'backend'.
Tested-by: Sean Bruno <sbruno@freebsd.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Two wrongs make a right, but they should be fixed anyway.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1455015557-15106-1-git-send-email-pbonzini@redhat.com>
|
|
In previous commit:
commit f2001a7e0555b66d6db25a3ff1801540814045bb
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Jan 19 11:14:30 2016 +0000
char: don't assume telnet initialization will not block
The code which writes the telnet initialization sequence moved
to an event loop callback. If the TCP chardev is opened as a
server in blocking mode (ie -serial telnet:0.0.0.0:3000,server,wait)
this results in a state where the TCP chardev is connected, but not
yet ready to send/recv data when virtual hardware is created.
When the virtual hardware initialization registers its chardev
callbacks, it triggers tcp_chr_update_read_handler, which will
add I/O watches to the connection.
When the telnet initialization finally runs, it will then call
tcp_chr_connect to finish the connection setup. This will in
turn add I/O watches to the connection too.
There are now two sets of I/O watches registered on the same
connection. This ultimately causes data loss on the connection,
for example, when typing into the telnet console only every
second byte is echoed back to the client.
The same flaw can affect channels running with TLS encryption
too, since they also have delayed connection setup completion.
The fix is to update tcp_chr_update_read_handler so that it
avoids registering watches if the connection is not fully
setup yet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1454939707-10869-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If a process opens the slave pts device, writes data to it, then
immediately closes it, the data doesn't reliably get delivered to the
emulated serial port. This seems to be because a read of the master
pty device returns EIO on Linux if no process has the pts device open,
even when data is waiting "in the pipe".
A fix seems to be for QEMU to keep the pts file descriptor open until
the pty is closed, as per the below patch.
Signed-off-by: Ashley Jonathan <jonathan.ashley@altran.com>
Message-Id: <AC19797808C8D548ABDE0CA4A97AA30A30DEB409@XMB-DCFR-37.europe.corp.altran.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
|
|
Broken since d0d7708ba29cbc, since the backend is NULL.
And now no longer needed by ivshmem.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
drv leaks if qemu_chr_alloc returns an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This integrates support for QIOChannelTLS object in the TCP
chardev backend. If the 'tls-creds=NAME' option is passed with
the '-chardev tcp' argument, then it will setup the chardev
such that the client is required to establish a TLS handshake
when connecting. There is no support for checking the client
certificate against ACLs in this initial patch. This is pending
work to QOM-ify the ACL object code.
A complete invocation to run QEMU as the server for a TLS
encrypted serial dev might be
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0,server \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=server,verify-peer=off,\
dir=/home/berrange/security/qemutls
To test with the gnutls-cli tool as the client:
$ gnutls-cli --priority=NORMAL -p 9000 \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
127.0.0.1
If QEMU was told to use 'anon' credential type, then use the
priority string 'NORMAL:+ANON-DH' with gnutls-cli
Alternatively, if setting up a chardev to operate as a client,
then the TLS credentials registered must be for the client
endpoint. First a TLS server must be setup, which can be done
with the gnutls-serv tool
$ gnutls-serv --priority=NORMAL -p 9000 --echo \
--x509cafile=/home/berrange/security/qemutls/ca-cert.pem \
--x509certfile=/home/berrange/security/qemutls/server-cert.pem \
--x509keyfile=/home/berrange/security/qemutls/server-key.pem
Then QEMU can connect with
$ qemu-system-x86_64 \
-nodefconfig -nodefaults -device sga -display none \
-chardev socket,id=s0,host=127.0.0.1,port=9000,tls-creds=tls0 \
-device isa-serial,chardev=s0 \
-object tls-creds-x509,id=tls0,endpoint=client,\
dir=/home/berrange/security/qemutls
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-5-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The current code for doing telnet initialization is writing to
a socket without checking the return status. While it is highly
unlikely to be a problem when writing to a bare socket, as the
buffers are large enough to prevent blocking, this cannot be
assumed safe with TLS sockets. So write the telnet initialization
code into a memory buffer and then use an I/O watch to fully
send the data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for introducing TLS support to the TCP chardev
backend, convert existing chardev code from using GIOChannel
to QIOChannel. This simplifies the chardev code by removing
most of the OS platform conditional code for dealing with
file descriptor passing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A variety of places were snprintf()ing into a fixed length
filename buffer. Some of the buffers were stack allocated,
while another was heap allocated with g_malloc(). Switch
them all to heap allocated using g_strdup_printf() avoiding
arbitrary length restrictions.
This also facilitates later patches which will want to
populate the filename by calling external functions
which do not support use of a pre-allocated buffer.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1453202071-10289-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The leak is only apparent on Win32. On POSIX platforms destroying a
mutex is not necessary.
Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The qemu-char.c contains two helper methods send_all
and recv_all. These are in fact declared in sockets.h
so ought to have been in util/qemu-sockets.c. For added
fun the impl of recv_all is completely missing on Win32.
Fortunately there is only a single caller of these
methods, the TPM passthrough code, which is only
ever compiled on Linux. With only a single caller
these helpers are not compelling enough to keep so
inline them in the TPM code, avoiding the need to
fix the missing recv_all on Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1450879144-17111-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
Our QA team wants to preserve serial output of the guest in between QEMU
runs to perform post-analysis.
By default this behavior is off (file is truncated each time QEMU is
started or device is plugged).
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1449211324-17856-1-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is a case where pty_chr_update_read_handler_locked's lack
of error checking can produce incorrect values. We are not using
SIGUSR1 anymore, so this is quite theoretical, but easy to fix.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for character-related
code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-19-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
If a chardev is allowed to be created outside of QMP, then it must be
also possible to free it. This is useful for ivshmem that creates
chardev anonymously and must be able to free them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
|
|
The qapi_copy_SocketAddress method is going to be useful
in more places than just qemu-char.c, so move it into
the qemu-sockets.c file to allow its reuse.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
All backends now return errors through Error*, so the "Failed to
create chardev" placeholder error can only be reached if the backend
is not available (and only from the chardev-add QMP command; instead,
the -chardev command line option fails earlier).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The backend now always returns errors via the Error* argument.
This avoids a double error message. Before:
qemu-system-x86_64: -chardev stdio,id=base: cannot use stdio with -daemonize
qemu-system-x86_64: -chardev stdio,id=base: Failed to create chardev
After:
qemu-system-x86_64: -chardev stdio,id=base: cannot use stdio with -daemonize
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
