| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use 'QemuMutex comp_done_lock' and 'QemuCond comp_done_cond' instead
of 'QemuMutex *comp_done_lock' and 'QemuCond comp_done_cond'. To keep
consistent with 'QemuMutex decomp_done_lock' and
'QemuCond comp_done_cond'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-10-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The current code for multi-thread decompression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-9-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The current code for multi-thread compression is not clear,
especially in the aspect of using lock. Refine the code
to make it clear.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-8-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
quit_comp_thread and quit_decomp_thread are accessed by several
thread, it's better to protect them with locks. We use a per
thread flag to replace the global one, and the new flag is protected
by a lock.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-7-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Use qemu_put_compression_data to do the compression directly
instead of using do_compress_ram_page, avoid some data copy.
very small improvement, at the same time, add code to check
if the compression is successful.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-6-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Current qemu_put_compression_data can only work with no writable
QEMUFile, and can't work with the writable QEMUFile. But it does
not provide any measure to prevent users from using it with a
writable QEMUFile.
We should fix this flaw to make it works with writable QEMUFile.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-5-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
page_buffer is set twice repeatedly, remove the previous set.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1462433579-13691-4-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
At the end of live migration and before vm_start() on the destination
side, we should make sure all the decompression tasks are finished, if
this can not be guaranteed, the VM may get the incorrect memory data,
or the updated memory may be overwritten by the decompression thread.
Add the code to fix this potential issue.
Suggested-by: David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Recently, a bug related to multiple thread compression feature for
live migration is reported. The destination side will be blocked
during live migration if there are heavy workload in host and
memory intensive workload in guest, this is most likely to happen
when there is one decompression thread.
Some parts of the decompression code are incorrect:
1. The main thread receives data from source side will enter a busy
loop to wait for a free decompression thread.
2. A lock is needed to protect the decomp_param[idx]->start, because
it is checked in the main thread and is updated in the decompression
thread.
Fix these two issues by following the code pattern for compression.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1462433579-13691-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
On the source, add a count of page requests received from the
destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The discard code in migration/ram.c would send request for
zero length discards in the case where no discards were needed.
It doesn't appear to have had any bad effect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com
Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The MigrateState struct uses an array for storing migration
parameters. This presumes that all future parameters will
be integers too, which is not going to be the case. There
is no functional reason why an array is used, if anything
it makes the code less clear. The QAPI schema already
defines a struct - MigrationParameters - capable of storing
all the individual parameters, so just use that instead of
an array.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1461751518-12128-25-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
into staging
migration fixes:
- ensure src block devices continue fine after a failed migration
- fail on migration blockers; helps 9p savevm/loadvm
- move autoconverge commands out of experimental state
- move the migration-specific qjson in migration/
# gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-1:
migration: regain control of images when migration fails to complete
savevm: fail if migration blockers are present
migration: Promote improved autoconverge commands out of experimental state
migration/qjson: Drop gratuitous use of QOM
migration: Move qjson.[ch] to migration/
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
On the one hand, we have already qemu_get_ram_block() whose function
is similar. On the other hand, we can directly use mr->ram_block but
searching RAMblock by ram_addr which is a kind of waste.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1462845901-89716-2-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The new autoconverge throttling commands have been tested for a release now. It
is time to move them out of the experimental state.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1461262038-8197-1-git-send-email-jjherne@linux.vnet.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This can cause various segmentation faults or aborts in qemu-iotests
test 091.
Fixes: 5b82b703b69acc67b78b98a5efc897a3912719eb
Cc: Dave Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Although accesses to ram_list.dirty_memory[] use atomics so multiple
threads can safely dirty the bitmap, the data structure is not fully
thread-safe yet.
This patch handles the RAM hotplug case where ram_list.dirty_memory[] is
grown. ram_list.dirty_memory[] is change from a regular bitmap to an
RCU array of pointers to fixed-size bitmap blocks. Threads can continue
accessing bitmap blocks while the array is being extended. See the
comments in the code for an in-depth explanation of struct
DirtyMemoryBlocks.
I have tested that live migration with virtio-blk dataplane works.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1453728801-5398-2-git-send-email-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some helper functions use parameters 'RAMBlock *block' and 'ram_addr_t *offset',
We can use 'PageSearchStatus *pss' directly instead, with this change, we
can reduce the number of parameters for these helper function, also
it is easily to add new parameters for these helper functions.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-5-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Split host_from_stream_offset() into two parts:
One is to get ram block, which the block idstr may be get from migration
stream, the other is to get hva (host) address from block and the offset.
Besides, we will do the check working in a new helper offset_in_ramblock().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-2-git-send-email-zhang.zhanghailiang@huawei.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-2-git-send-email-peter.maydell@linaro.org
|
|
Replace the uint8 softfloat-specific typedef with uint8_t.
This change was made with
find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint8\b/uint8_t/g'
together with manual removal of the typedef definition and
manual fixing of more erroneous uses found via test compilation.
It turns out that the only code using this type is an accidental
use where uint8_t was intended anyway...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-7-git-send-email-peter.maydell@linaro.org
|
|
into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
|
|
qemu_get_buffer does a copy, we can avoid the memcpy, and
we can then remove the extra buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-7-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Avoid a data copy (if we're lucky) in the xbzrle code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-6-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Emit an event each time we sync the dirty bitmap on the source;
this helps libvirt use postcopy by giving it a kick when it
might be a good idea to start the postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1450266458-3178-5-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
My fix (84e7b80a) replaced the last_sent_block update that I'd
removed earlier; however it was too aggressive in the xbzrle case.
save_xbzrle_page might return '0' to mean that the page didn't
need sending since it was the same as the last sent version;
in this case we can't update 'last_sent_block' since we didn't
actually send it.
Symptom: 'Illegal RAM offset 1018000' as we try and send a page
to the wrong RAMBlock; potentially that could be a data
corruption if you were really unlucky.
Fixes: 84e7b80a05c0c44b90533c6cd2f1db5c932ccf77
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1449765106-6528-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In a82d593b61054b3dea43 I accidentally removed the setting of
last_sent_block, put it back.
Symptoms:
Multithreaded compression only uses one thread.
Migration is a bit less efficient since it won't use 'cont' flags.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b61054b3dea43
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Where the target page size is different from the host page
we special case it, but I messed up on the zero case check.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Not all the wold is 64bits (yet).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Prior to the start of postcopy, ensure that everything that will
be transferred later is a whole host-page in size.
This is accomplished by discarding partially transferred host pages
and marking any that are partially dirty as fully dirty.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Once we're in postcopy the source processors are stopped and memory
shouldn't change any more, so there's no need to look at the dirty
map.
There are two notes to this:
1) If we do resync and a page had changed then the page would get
sent again, which the destination wouldn't allow (since it might
have also modified the page)
2) Before disabling this I'd seen very rare cases where a page had been
marked dirtied although the memory contents are apparently identical
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Ensure that target pages received within a host page are in order.
This shouldn't trigger, but in the cases where the sender goes
wrong and sends stuff out of order it produces a corruption that's
really nasty to debug.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_in_place is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.
Note:
a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.
b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.
c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
On receiving MIG_RPCOMM_REQ_PAGES look up the address and
queue the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Maintain an 'unsentmap' of pages that have yet to be sent.
This is used in the following patches to discard some set of
the pages already sent as we enter postcopy mode.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add qemu_savevm_state_complete_postcopy to complement
qemu_savevm_state_complete_precopy together with a new
save_live_complete_postcopy method on devices.
The save_live_complete_precopy method is called on
all devices during a precopy migration, and all non-postcopy
devices during a postcopy migration at the transition.
The save_live_complete_postcopy method is called at
the end of postcopy for all postcopiable devices.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
The main RAM load loop has a call to host_from_stream_offset for
each page type that actually loads data with the same test;
factor it out before the switch.
The host = NULL is to silence a bogus gcc warning of
an unitialised in the RAM_SAVE_COMPRESS_PAGE case, it
doesn't seem to realise that host is always initialised by the if at
the top in the cases the switch takes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Useful for debugging the migration bitmap and other bitmaps
of the same format (including the sentmap in postcopy).
The bitmap is printed to stderr.
Lines that are all the expected value are excluded so the output
can be quite compact for many bitmaps.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Add a function to find a RAMBlock by name; use it in two
of the places that already open code that loop; we've
got another use later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
Just clean up code, no behavior change.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
|
|
'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
|
