summaryrefslogtreecommitdiff
path: root/memory_mapping.c
AgeCommit message (Collapse)AuthorFilesLines
2015-06-26memory_mapping: Rework cpu related includesPeter Crosthwaite1-1/+1
This makes it more consistent with all other core code files, which either just rely on qemu-common.h inclusion or precede cpu.h with qemu-common.h. cpu-all.h should not be included in addition to cpu.h. Remove it. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <1433714349-7262-1-git-send-email-crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31Add skip_dump flag to ignore memory region during dumpNikunj A Dadhania1-1/+2
The PCI MMIO might be disabled or the device in the reset state. Make sure we do not dump these memory regions. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber1-2/+3
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-08dump: rebase from host-private RAMBlock offsets to guest-physical addressesLaszlo Ersek1-9/+13
RAMBlock.offset --> GuestPhysBlock.target_start RAMBlock.offset + RAMBlock.length --> GuestPhysBlock.target_end RAMBlock.length --> GuestPhysBlock.target_end - GuestPhysBlock.target_start "GuestPhysBlock.host_addr" is only used when writing the dump contents. This patch enables "crash" to work with the vmcore by rebasing the vmcore from the left side of the following diagram to the right side: host-private offset relative to ram_addr RAMBlock guest-visible paddrs 0 +-------------------+.....+-------------------+ 0 | ^ | | ^ | | 640 KB | | 640 KB | | v | | v | 0x0000a0000 +-------------------+.....+-------------------+ 0x0000a0000 | ^ | |XXXXXXXXXXXXXXXXXXX| | 384 KB | |XXXXXXXXXXXXXXXXXXX| | v | |XXXXXXXXXXXXXXXXXXX| 0x000100000 +-------------------+.....+-------------------+ 0x000100000 | ^ | | ^ | | 3583 MB | | 3583 MB | | v | | v | 0x0e0000000 +-------------------+.....+-------------------+ 0x0e0000000 | ^ |. |XXXXXXXXXXXXXXXXXXX| | above_4g_mem_size | . |XXXX PCI hole XXXXX| | v | . |XXXX XXXXX| ram_size +-------------------+ . |XXXX 512 MB XXXXX| . .|XXXXXXXXXXXXXXXXXXX| . +-------------------+ 0x100000000 . | ^ | . | above_4g_mem_size | .| v | +-------------------+ ram_size + 512 MB Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08dump: populate guest_phys_blocksLaszlo Ersek1-0/+84
While the machine is paused, in guest_phys_blocks_append() we register a one-shot MemoryListener, solely for the initial collection of the valid guest-physical memory ranges that happens at listener registration time. For each range that is reported to guest_phys_blocks_region_add(), we attempt to merge the range with the preceding one. Ranges can only be joined if they are contiguous in both guest-physical address space, and contiguous in host virtual address space. The "maximal" ranges that remain in the end constitute the guest-physical memory map that the dump will be based on. Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-08dump: introduce GuestPhysBlockListLaszlo Ersek1-0/+17
The vmcore must use physical addresses that are visible to the guest, not addresses that point into linear RAMBlocks. As first step, introduce the list type into which we'll collect the physical mappings in effect at the time of the dump. Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber1-8/+8
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11memory_mapping: Improve qemu_get_guest_memory_mapping() error reportingAndreas Färber1-6/+4
Pass any Error out into dump_init() and have it actually stop on errors. Whether it is unsupported on a certain CPU can be checked by looking for a NULL CPUClass::get_memory_mapping field. Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> [AF: Reverted changes to CPU loops] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11cpu: Turn cpu_get_memory_mapping() into a CPUState hookAndreas Färber1-3/+4
Change error reporting from return value to Error argument. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> [AF: Fixed cpu_get_memory_mapping() documentation] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11cpu: Turn cpu_paging_enabled() into a CPUState hookAndreas Färber1-1/+1
Relocate assignment of x86 get_arch_id to have all hooks in one place. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-20exec: change RAM list to a TAILQPaolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-10/+10
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-11Fix some more license versions (GPL2+ instead of GPL2)Stefan Weil1-2/+2
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2012-06-07dump: remove dumping stuff from cpu-all.hPaolo Bonzini1-3/+0
This simplifies things, because they will only be included for softmmu targets and because the stubs are taken out-of-line in separate files, which in the future could even be compiled only once. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04introduce a new monitor command 'dump-guest-memory' to dump guest's memoryWen Congyang1-0/+27
The command's usage: dump-guest-memory [-p] protocol [begin] [length] The supported protocol can be file or fd: 1. file: the protocol starts with "file:", and the following string is the file's path. 2. fd: the protocol starts with "fd:", and the following string is the fd's name. Note: 1. If you want to use gdb to process the core, please specify -p option. The reason why the -p option is not default is: a. guest machine in a catastrophic state can have corrupted memory, which we cannot trust. b. The guest machine can be in read-mode even if paging is enabled. For example: the guest machine uses ACPI to sleep, and ACPI sleep state goes in real-mode. 2. If you don't want to dump all guest's memory, please specify the start physical address and the length. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04Add API to get memory mapping without do pagingWen Congyang1-0/+9
crash does not need the virtual address and physical address mapping, and the mapping does not include the memory that is not referenced by the page table. crash does not use the virtual address, so we can create the mapping for all physical memory(virtual address is always 0). This patch provides a API to do this thing, and it will be used in the following patch. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04Add API to get memory mappingWen Congyang1-0/+47
Add API to get all virtual address and physical address mapping. If the guest doesn't use paging, the virtual address is equal to the phyical address. The virtual address and physical address mapping is for gdb's user, and it does not include the memory that is not referenced by the page table. So if you want to use crash to anaylze the vmcore, please do not specify -p option. the reason why the -p option is not default explicitly: guest machine in a catastrophic state can have corrupted memory, which we cannot trust. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04Add API to create memory mapping listWen Congyang1-0/+166
The memory mapping list stores virtual address and physical address mapping. The virtual address and physical address are contiguous in the mapping. The folloing patch will use this information to create PT_LOAD in the vmcore. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 19:20:22 +0000