summaryrefslogtreecommitdiff
path: root/hw/nvram
AgeCommit message (Collapse)AuthorFilesLines
2019-01-04fw_cfg: Make qemu_extra_params_fw locallyLi Qiang1-0/+1
qemu_extra_params_fw[] has external linkage, but is used only in fw_cfg_bootsplash(), it makes sense to make it locally. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-4-git-send-email-liq3ea@gmail.com> [PMD: Removed qemu_extra_params_fw declaration in vl.c] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot reboot-timeout error checkingLi Qiang1-14/+13
fw_cfg_reboot() gets option parameter "reboot-timeout" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors, and fails to reject negative values. Positive values above the limit get reported and replaced by the limit. This patch checks for conversion errors properly, and reject all values outside 0...0xffff. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot bootsplash error checkingLi Qiang1-22/+13
fw_cfg_bootsplash() gets option parameter "splash-time" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors. This is needlessly complicated and error-prone. But as "splash-time not specified" is not the same as "splash-time=T" for any T, we need use qemu_opt_get() to check if splash time exists. This patch also make the qemu exit when finding or loading splash file failed. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Improve error message when can't load splash fileLi Qiang1-4/+3
read_splashfile() reports "failed to read splash file" without further details. Get the details from g_file_get_contents(), and include them in the error message. Also remove unnecessary 'res' variable. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1541052148-28752-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-12-13nvram/ds1225y: Convert sysbus init function to realize functionMao Zhongyi1-7/+5
Use DeviceClass rather than SysBusDeviceClass in nvram_sysbus_class_init(). Cc: pbonzini@redhat.com Cc: marcandre.lureau@redhat.com Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-15-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau2-6/+6
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-30ppc: move at24c to its own CONFIG_ symbolPaolo Bonzini1-1/+1
AT24c EEPROM is currently gated by CONFIG_I2C, and as such it is being included in all emulators that use I2C, even if they do not really need it. Separate it and, since it was added for the e500 machines, add it to qemu-system-ppc and qemu-system-ppc64. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20180522191743.12872-1-pbonzini@redhat.com> [lv: rebase] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-02hw/nvram/fw_cfg: Use memberwise copy of MemoryRegionOps structPeter Maydell1-6/+1
We've now removed the 'old_mmio' member from MemoryRegionOps, so we can perform the copy as a simple struct copy rather than having to do it via a memberwise copy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180824170422.5783-3-peter.maydell@linaro.org> Based-on: <20180802174042.29234-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02fw_cfg_mem: add read memory region callbackLi Qiang1-0/+6
Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20180912160118.21158-2-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-16fw_cfg: ignore suffixes in the bootdevice list dependent on machine classMark Cave-Ayland1-1/+1
For the older machines (such as Mac and SPARC) the DT nodes representing bootdevices for disk nodes are irregular for mainly historical reasons. Since the majority of bootdevice nodes for these machines either do not have a separate disk node or require different (custom) names then it is much easier for processing to just disable all suffixes for a particular machine. Introduce a new ignore_boot_device_suffixes MachineClass property to control bootdevice suffix generation, defaulting to false in order to preserve compatibility. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-07-02hw/ppc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-4/+7
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-13/+11
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé1-13/+11
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make MemoryRegion valid.accepts callback take a MemTxAttrs argumentPeter Maydell1-4/+8
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+2
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Clean up includesMarkus Armbruster1-2/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-02-05i2c: Add a CONFIG_I2C master switch to the configuration filesThomas Huth1-1/+1
The i2c core and the at24c EEPROM should only be compiled and linked on the machines that support i2c. Otherwise it's quite strange to see the at24c-eeprom to be "available" on qemu-system-s390x for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-19fw_cfg: fix memory corruption when all fw_cfg slots are usedMarcel Apfelbaum1-2/+4
When all the fw_cfg slots are used, a write is made outside the bounds of the fw_cfg files array as part of the sort algorithm. Fix it by avoiding an unnecessary array element move. Fix also an assert while at it. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180108215007.46471-1-marcel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-16mips: fix potential fopen(NULL,...)Marc-André Lureau1-2/+2
Spotted thanks to ASAN. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180104160523.22995-18-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-15nvram: add AT24Cx i2c eepromMichael Davidsaver2-0/+206
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-10-15fw_cfg: add write callbackMarc-André Lureau1-4/+10
Reintroduce the write callback that was removed when write support was removed in commit 023e3148567ac898c7258138f8e86c3c2bb40d07. Contrary to the previous callback implementation, the write_cb callback is called whenever a write happened, so handlers must be ready to handle partial write as necessary. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-14/+16
pc, pci, virtio: patches queued before 2.10 A bunch of stuff that was posted before the 2.10 timeframe, mostly fixes/cleanups. New PCI bridges. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 08 Sep 2017 14:15:34 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: fw_cfg: rename read callback pci: add reserved slot check to do_pci_register_device() pci: move check for existing devfn into new pci_bus_devfn_available() helper vmgenid: replace x-write-pointer-available hack vhost-user-bridge: fix resume regression (since 2.9) libvhost-user: support resuming vq->last_avail_idx based on used_idx acpi/vmgenid: change device category to misc intel_iommu: fix missing BQL in pt fast path docs: update documentation considering PCIE-PCI bridge hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware hw/pci: introduce pcie-pci-bridge device Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen" hw/acpi: Move acpi_set_pci_info to pcihp hw/acpi: Limit hotplug to root bus on legacy mode pc: add 2.11 machine types vhost: Release memory references on cleanup Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08fw_cfg: rename read callbackMarc-André Lureau1-14/+16
The callback is called on select. Furthermore, the next patch introduced a new callback, so rename the function type with a generic name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/nvram/spapr_nvram: Device can not be created by the usersThomas Huth1-0/+2
Trying to add a spapr-nvram device currently aborts QEMU like this: $ ppc64-softmmu/qemu-system-ppc64 -device spapr-nvram qemu-system-ppc64: hw/ppc/spapr_rtas.c:407: spapr_rtas_register: Assertion `!rtas_table[token].name' failed. Aborted (core dumped) This NVRAM device registers RTAS calls during its realize function and thus can only be used once - and that's internally from spapr.c. So let's mark the device with user_creatable = false to avoid that the users can crash their QEMU this way. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-01trace-events: fix code style: print 0x before hex numbersVladimir Sementsov-Ogievskiy1-1/+1
The only exception are groups of numers separated by symbols '.', ' ', ':', '/', like 'ab.09.7d'. This patch is made by the following: > find . -name trace-events | xargs python script.py where script.py is the following python script: ========================= #!/usr/bin/env python import sys import re import fileinput rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)' rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')') rbad = re.compile('(?<!0x)' + rhex) files = sys.argv[1:] for fname in files: for line in fileinput.input(fname, inplace=True): arr = re.split(rgroup, line) for i in range(0, len(arr), 2): arr[i] = re.sub(rbad, '0x\g<0>', arr[i]) sys.stdout.write(''.join(arr)) ========================= Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé1-1/+1
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-17fw_cfg: move QOM type defines and fw_cfg types into fw_cfg.hMark Cave-Ayland1-48/+1
By exposing FWCfgIoState and FWCfgMemState internals we allow the possibility for the internal MemoryRegion fields to be mapped by name for boards that wish to wire up the fw_cfg device themselves. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <1500025208-14827-4-git-send-email-mark.cave-ayland@ilande.co.uk> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17fw_cfg: move qdev_init_nofail() from fw_cfg_init1() to callersMark Cave-Ayland1-11/+16
When looking to instantiate a TYPE_FW_CFG_MEM or TYPE_FW_CFG_IO device to be able to wire it up differently, it is much more convenient for the caller to instantiate the device and have the fw_cfg default files already preloaded during realize. Move fw_cfg_init1() to the end of both the fw_cfg_mem_realize() and fw_cfg_io_realize() functions so it no longer needs to be called manually when instantiating the device, and also rename it to fw_cfg_common_realize() which better describes its new purpose. Since it is now the responsibility of the machine to wire up the fw_cfg device it is necessary to introduce a object_property_add_child() call into fw_cfg_init_io() and fw_cfg_init_mem() to link the fw_cfg device to the root machine object as before. Finally with the previous change to fw_cfg_find() we can now remove the assert() preventing multiple fw_cfg devices being instantiated and replace them with a simple call to fw_cfg_find() at realize time instead. This allows us to remove FW_CFG_NAME and FW_CFG_PATH since they are no longer required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1500025208-14827-3-git-send-email-mark.cave-ayland@ilande.co.uk> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17fw_cfg: switch fw_cfg_find() to locate the fw_cfg device by type rather than ↵Mark Cave-Ayland1-1/+2
path This will enable the fw_cfg device to be placed anywhere within the QOM tree regardless of its machine location. Note that we also add a comment to document the behaviour that we return NULL to indicate failure where either no fw_cfg device or multiple fw_cfg devices are found. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <1500025208-14827-2-git-send-email-mark.cave-ayland@ilande.co.uk> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-13Convert error_report() to warn_report()Alistair Francis1-1/+1
Convert all uses of error_report("warning:"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these two commands: find ./* -type f -exec sed -i \ 's|error_report(".*warning[,:] |warn_report("|Ig' {} + Indentation fixed up manually afterwards. The test-qdev-global-props test case was manually updated to ensure that this patch passes make check (as the test cases are case sensitive). Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Suggested-by: Thomas Huth <thuth@redhat.com> Cc: Jeff Cody <jcody@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Lieven <pl@kamp.de> Cc: Josh Durgin <jdurgin@redhat.com> Cc: "Richard W.M. Jones" <rjones@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Greg Kurz <groug@kaod.org> Cc: Rob Herring <robh@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Peter Chubb <peter.chubb@nicta.com.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Alexander Graf <agraf@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-03fw_cfg: move setting of FW_CFG_VERSION_DMA bit to fw_cfg_init1()Mark Cave-Ayland1-9/+7
The setting of the FW_CFG_VERSION_DMA bit is the same across both the TYPE_FW_CFG_MEM and TYPE_FW_CFG_IO devices, so unify the logic in fw_cfg_init1(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu>
2017-07-03fw_cfg: don't map the fw_cfg IO ports in fw_cfg_io_realize()Mark Cave-Ayland1-8/+8
As indicated by Laszlo it is a QOM bug for the realize() method to actually map the device. Set up the IO regions within fw_cfg_io_realize() and defer the mapping with sysbus_add_io() to the caller, as already done in fw_cfg_init_mem_wide(). This makes the iobase and dma_iobase properties now obsolete so they can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gabriel Somlo <somlo@cmu.edu>
2017-06-28vmstate: error hint for failed equal checksHalil Pasic1-1/+1
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug, but it's actually the best we can do. Especially in these cases a verbose error message is required. Let's introduce infrastructure for specifying a error hint to be used if equal check fails. Let's do this by adding a parameter to the _EQUAL macros called _err_hint. Also change all current users to pass NULL as last parameter so nothing changes for them. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-06spapr_nvram: Check return value from blk_getlength()Peter Maydell1-1/+9
The blk_getlength() function can return an error value if the image size cannot be determined. Check for this rather than ploughing on and trying to g_malloc0() a negative number. (Spotted by Coverity, CID 1288484.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-28hw/block: Request permissionsKevin Wolf1-0/+8
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-13migration: consolidate VMStateField.startHalil Pasic2-2/+2
The member VMStateField.start is used for two things, partial data migration for VBUFFER data (basically provide migration for a sub-buffer) and for locating next in QTAILQ. The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC is used. This however goes unnoticed because actually partial migration for VBUFFER is not used at all. Let's consolidate the usage of VMStateField.start by removing support for partial migration for VBUFFER. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24migration: extend VMStateInfoJianjun Duan2-4/+12
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-18fw-cfg: bump "x-file-slots" to 0x20 for 2.9+ machine typesLaszlo Ersek1-2/+4
More precisely, the "x-file-slots" count is bumped for all machine types that: (a) use fw_cfg, and (b) are not versioned (hence migration is not expected to work for them across QEMU releases anyway), or have version 2.9. This affects machine types implemented in the following source files: - "hw/arm/virt.c". The "virt-*" machine type is versioned, and the <= 2.8 versions already depend on HW_COMPAT_2_8 (see commit e353aac51b944). Therefore adding the "x-file-slots" compat values to HW_COMPAT_2_8 suffices. - "hw/i386/pc.c". The "pc-i440fx-*" (including "pc-*") and "pc-q35-*" machine types are versioned. Modifying HW_COMPAT_2_8 is sufficient here too (see commit "pc: Add 2.9 machine-types"). The "isapc" machtype is not versioned. The "xenfv" machine type, which uses fw_cfg for direct kernel booting, is also not versioned. - "hw/ppc/mac_newworld.c". The "mac99" machine type is not versioned. - "hw/ppc/mac_oldworld.c". The "g3beige" machine type is not versioned. - "hw/sparc/sun4m.c". None of the 9 machine types defined in this file appear versioned. - "hw/sparc64/sun4u.c". None of the 3 machine types defined in this file appear versioned. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: turn FW_CFG_FILE_SLOTS into a device propertyLaszlo Ersek1-8/+63
We'd like to raise the value of FW_CFG_FILE_SLOTS. Doing it naively could lead to problems with backward migration: a more recent QEMU (running an older machine type) would allow the guest, in fw_cfg_select(), to select a high key value that is unavailable in the same machine type implemented by the older (target) QEMU. On the target host, fw_cfg_data_read() for example could dereference nonexistent entries. As first step, size the FWCfgState.entries[*] and FWCfgState.entry_order arrays dynamically. All three array sizes will be influenced by the new field FWCfgState.file_slots (and matching device property). Make the following changes: - Replace the FW_CFG_FILE_SLOTS macro with FW_CFG_FILE_SLOTS_MIN (minimum count of fw_cfg file slots) in the header file. The value remains 0x10. - Replace all uses of FW_CFG_FILE_SLOTS with a helper function called fw_cfg_file_slots(), returning the new property. - Eliminate the macro FW_CFG_MAX_ENTRY, and replace all its uses with a helper function called fw_cfg_max_entry(). - In the MMIO- and IO-mapped realize functions both, allocate all three arrays dynamically, based on the new property. - The new property defaults to FW_CFG_FILE_SLOTS_MIN. This is going to be customized in the following patches. Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-18fw-cfg: support writeable blobsMichael S. Tsirkin1-8/+29
Useful to send guest data back to QEMU. Changes from Laszlo Ersek <lersek@redhat.com>: - rebase the patch from Michael Tsirkin's original postings at [1] and [2] to the following patches: - loader: Allow a custom AddressSpace when loading ROMs - loader: Add AddressSpace loading support to uImages - loader: fix handling of custom address spaces when adding ROM blobs - reject such writes immediately that would exceed the end of the array, rather than performing a partial write before setting the error bit: see the (len != dma.length) condition - document the write interface [1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html [2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html Cc: "Gabriel L. Somlo" <somlo@cmu.edu> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: qemu-arm@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-11-16fw_cfg: move FW_CFG_NB_CPUS out of fw_cfg_init1()Igor Mammedov1-1/+0
PC will use this field in other way, so move it outside the common code so PC could set a different value, i.e. all CPUs regardless of where they are coming from (-smp X | -device cpu...). It's quick and dirty hack as it could be implemented in more generic way in MashineClass. But do it in simple way since only PC is affected so far. Later we can generalize it when another affected target gets support for -device cpu. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1479212236-183810-3-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell1-1/+0
staging trivial patches for 2016-10-28 # gpg: Signature made Fri 28 Oct 2016 16:17:51 BST # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (23 commits) Fix build for less common build directories names clean-up: removed duplicate #includes scripts/clean-includes: added duplicate #include check monitor: deprecate 'default' option qemu-ga: Remove stray 'q' in documentation Makefile: Fix help text for target 'installer' s390: avoid always-true comparison in s390_pci_generate_fid() migration: Remove unneeded NULL check from migrate_fd_error() scripts/hxtool: fix undefined behavour of echo qemu-options.hx: set: fix copy-paste error usb: Change *_exitfn return type from int to void MAINTAINERS: qemu-trivial information colo-compare: remove unused struct CompareChardevProps and 'props' variable milkymist-pfpu: fix potential integer overflow hw/block/nvme: Simplify if-statements a little bit target-lm32: rewrite gen_compare() lm32: milkymist-tmu2: fix integer overflow target-lm32: disable asm logging via LOG_DIS() target-lm32: swap operand of wcsr in LOG_DIS() target-lm32: fix LOG_DIS operand order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28clean-up: removed duplicate #includesAnand J1-1/+0
Some files contain multiple #includes of the same header file. Removed most of those unnecessary duplicate entries using scripts/clean-includes. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Anand J <anand.indukala@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameterThomas Huth1-0/+6
In case we do not load the NVRAM contents from a file and the user specified the "-prom-env" parameter, use the new CHRP NVRAM helper functions to pre-initialize the NVRAM partitions, so that the SLOF firmware now can pick up the environment variables from the -prom-env parameter, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28nvram: Move the remaining CHRP NVRAM related code to chrp_nvram.[ch]Thomas Huth2-15/+23
Everything that is related to CHRP NVRAM should rather reside in chrp_nvram.c / chrp_nvram.h instead of openbios_firmware_abi.h. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28nvram: Introduce helper functions for CHRP "system" and "free space" partitionsThomas Huth3-32/+85
The "system partition" and "free space" partition layouts are defined by the CHRP and LoPAPR specification, and used by OpenBIOS and SLOF. We can re-use this code for other machines that use OpenBIOS and SLOF, too. So let's make this code independent from the MAC NVRAM environment and put it into two proper helper functions. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng1-1/+1
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-15fw_cfg: remove useless castsLaurent Vivier1-2/+2
This patch is the result of coccinelle script scripts/coccinelle/typecast.cocci CC: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier1-1/+1
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-08error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-1/+1
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. checkpatch.pl tries to flag them since commit 5d596c2, but it's not very good at it. Offenders tracked down with Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated version of the script from commit 312fd5f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 03:41:06 +0000