diff options
Diffstat (limited to 'hw/rtl8139.c')
-rw-r--r-- | hw/rtl8139.c | 2875 |
1 files changed, 2875 insertions, 0 deletions
diff --git a/hw/rtl8139.c b/hw/rtl8139.c new file mode 100644 index 0000000000..49c4c916b7 --- /dev/null +++ b/hw/rtl8139.c @@ -0,0 +1,2875 @@ +/** + * QEMU RTL8139 emulation + * + * Copyright (c) 2006 Igor Kovalenko + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + + * Modifications: + * 2006-Jan-28 Mark Malakanov : TSAD and CSCR implementation (for Windows driver) + * + */ + +#include "vl.h" + + +/* debug RTL8139 card */ +//#define DEBUG_RTL8139 1 + +/* debug RTL8139 card C+ mode only */ +//#define DEBUG_RTL8139CP 1 + +/* RTL8139 provides frame CRC with received packet, this feature seems to be + ignored by most drivers, disabled by default */ +//#define RTL8139_CALCULATE_RXCRC 1 + + +#if defined(RTL8139_CALCULATE_RXCRC) +/* For crc32 */ +#include <zlib.h> +#endif + +#define SET_MASKED(input, mask, curr) \ + ( ( (input) & ~(mask) ) | ( (curr) & (mask) ) ) + +/* arg % size for size which is a power of 2 */ +#define MOD2(input, size) \ + ( ( input ) & ( size - 1 ) ) + +/* Symbolic offsets to registers. */ +enum RTL8139_registers { + MAC0 = 0, /* Ethernet hardware address. */ + MAR0 = 8, /* Multicast filter. */ + TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ + TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ + RxBuf = 0x30, + ChipCmd = 0x37, + RxBufPtr = 0x38, + RxBufAddr = 0x3A, + IntrMask = 0x3C, + IntrStatus = 0x3E, + TxConfig = 0x40, + RxConfig = 0x44, + Timer = 0x48, /* A general-purpose counter. */ + RxMissed = 0x4C, /* 24 bits valid, write clears. */ + Cfg9346 = 0x50, + Config0 = 0x51, + Config1 = 0x52, + FlashReg = 0x54, + MediaStatus = 0x58, + Config3 = 0x59, + Config4 = 0x5A, /* absent on RTL-8139A */ + HltClk = 0x5B, + MultiIntr = 0x5C, + PCIRevisionID = 0x5E, + TxSummary = 0x60, /* TSAD register. Transmit Status of All Descriptors*/ + BasicModeCtrl = 0x62, + BasicModeStatus = 0x64, + NWayAdvert = 0x66, + NWayLPAR = 0x68, + NWayExpansion = 0x6A, + /* Undocumented registers, but required for proper operation. */ + FIFOTMS = 0x70, /* FIFO Control and test. */ + CSCR = 0x74, /* Chip Status and Configuration Register. */ + PARA78 = 0x78, + PARA7c = 0x7c, /* Magic transceiver parameter register. */ + Config5 = 0xD8, /* absent on RTL-8139A */ + /* C+ mode */ + TxPoll = 0xD9, /* Tell chip to check Tx descriptors for work */ + RxMaxSize = 0xDA, /* Max size of an Rx packet (8169 only) */ + CpCmd = 0xE0, /* C+ Command register (C+ mode only) */ + IntrMitigate = 0xE2, /* rx/tx interrupt mitigation control */ + RxRingAddrLO = 0xE4, /* 64-bit start addr of Rx ring */ + RxRingAddrHI = 0xE8, /* 64-bit start addr of Rx ring */ + TxThresh = 0xEC, /* Early Tx threshold */ +}; + +enum ClearBitMasks { + MultiIntrClear = 0xF000, + ChipCmdClear = 0xE2, + Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), +}; + +enum ChipCmdBits { + CmdReset = 0x10, + CmdRxEnb = 0x08, + CmdTxEnb = 0x04, + RxBufEmpty = 0x01, +}; + +/* C+ mode */ +enum CplusCmdBits { + CPlusRxEnb = 0x0002, + CPlusTxEnb = 0x0001, +}; + +/* Interrupt register bits, using my own meaningful names. */ +enum IntrStatusBits { + PCIErr = 0x8000, + PCSTimeout = 0x4000, + RxFIFOOver = 0x40, + RxUnderrun = 0x20, + RxOverflow = 0x10, + TxErr = 0x08, + TxOK = 0x04, + RxErr = 0x02, + RxOK = 0x01, + + RxAckBits = RxFIFOOver | RxOverflow | RxOK, +}; + +enum TxStatusBits { + TxHostOwns = 0x2000, + TxUnderrun = 0x4000, + TxStatOK = 0x8000, + TxOutOfWindow = 0x20000000, + TxAborted = 0x40000000, + TxCarrierLost = 0x80000000, +}; +enum RxStatusBits { + RxMulticast = 0x8000, + RxPhysical = 0x4000, + RxBroadcast = 0x2000, + RxBadSymbol = 0x0020, + RxRunt = 0x0010, + RxTooLong = 0x0008, + RxCRCErr = 0x0004, + RxBadAlign = 0x0002, + RxStatusOK = 0x0001, +}; + +/* Bits in RxConfig. */ +enum rx_mode_bits { + AcceptErr = 0x20, + AcceptRunt = 0x10, + AcceptBroadcast = 0x08, + AcceptMulticast = 0x04, + AcceptMyPhys = 0x02, + AcceptAllPhys = 0x01, +}; + +/* Bits in TxConfig. */ +enum tx_config_bits { + + /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */ + TxIFGShift = 24, + TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */ + TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */ + TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */ + TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */ + + TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ + TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */ + TxClearAbt = (1 << 0), /* Clear abort (WO) */ + TxDMAShift = 8, /* DMA burst value (0-7) is shifted this many bits */ + TxRetryShift = 4, /* TXRR value (0-15) is shifted this many bits */ + + TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ +}; + + +/* Transmit Status of All Descriptors (TSAD) Register */ +enum TSAD_bits { + TSAD_TOK3 = 1<<15, // TOK bit of Descriptor 3 + TSAD_TOK2 = 1<<14, // TOK bit of Descriptor 2 + TSAD_TOK1 = 1<<13, // TOK bit of Descriptor 1 + TSAD_TOK0 = 1<<12, // TOK bit of Descriptor 0 + TSAD_TUN3 = 1<<11, // TUN bit of Descriptor 3 + TSAD_TUN2 = 1<<10, // TUN bit of Descriptor 2 + TSAD_TUN1 = 1<<9, // TUN bit of Descriptor 1 + TSAD_TUN0 = 1<<8, // TUN bit of Descriptor 0 + TSAD_TABT3 = 1<<07, // TABT bit of Descriptor 3 + TSAD_TABT2 = 1<<06, // TABT bit of Descriptor 2 + TSAD_TABT1 = 1<<05, // TABT bit of Descriptor 1 + TSAD_TABT0 = 1<<04, // TABT bit of Descriptor 0 + TSAD_OWN3 = 1<<03, // OWN bit of Descriptor 3 + TSAD_OWN2 = 1<<02, // OWN bit of Descriptor 2 + TSAD_OWN1 = 1<<01, // OWN bit of Descriptor 1 + TSAD_OWN0 = 1<<00, // OWN bit of Descriptor 0 +}; + + +/* Bits in Config1 */ +enum Config1Bits { + Cfg1_PM_Enable = 0x01, + Cfg1_VPD_Enable = 0x02, + Cfg1_PIO = 0x04, + Cfg1_MMIO = 0x08, + LWAKE = 0x10, /* not on 8139, 8139A */ + Cfg1_Driver_Load = 0x20, + Cfg1_LED0 = 0x40, + Cfg1_LED1 = 0x80, + SLEEP = (1 << 1), /* only on 8139, 8139A */ + PWRDN = (1 << 0), /* only on 8139, 8139A */ +}; + +/* Bits in Config3 */ +enum Config3Bits { + Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */ + Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */ + Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */ + Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */ + Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */ + Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */ + Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */ + Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */ +}; + +/* Bits in Config4 */ +enum Config4Bits { + LWPTN = (1 << 2), /* not on 8139, 8139A */ +}; + +/* Bits in Config5 */ +enum Config5Bits { + Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */ + Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */ + Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */ + Cfg5_FIFOAddrPtr = (1 << 3), /* Realtek internal SRAM testing */ + Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */ + Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */ + Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */ +}; + +enum RxConfigBits { + /* rx fifo threshold */ + RxCfgFIFOShift = 13, + RxCfgFIFONone = (7 << RxCfgFIFOShift), + + /* Max DMA burst */ + RxCfgDMAShift = 8, + RxCfgDMAUnlimited = (7 << RxCfgDMAShift), + + /* rx ring buffer length */ + RxCfgRcv8K = 0, + RxCfgRcv16K = (1 << 11), + RxCfgRcv32K = (1 << 12), + RxCfgRcv64K = (1 << 11) | (1 << 12), + + /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */ + RxNoWrap = (1 << 7), +}; + +/* Twister tuning parameters from RealTek. + Completely undocumented, but required to tune bad links on some boards. */ +/* +enum CSCRBits { + CSCR_LinkOKBit = 0x0400, + CSCR_LinkChangeBit = 0x0800, + CSCR_LinkStatusBits = 0x0f000, + CSCR_LinkDownOffCmd = 0x003c0, + CSCR_LinkDownCmd = 0x0f3c0, +*/ +enum CSCRBits { + CSCR_Testfun = 1<<15, /* 1 = Auto-neg speeds up internal timer, WO, def 0 */ + CSCR_LD = 1<<9, /* Active low TPI link disable signal. When low, TPI still transmits link pulses and TPI stays in good link state. def 1*/ + CSCR_HEART_BIT = 1<<8, /* 1 = HEART BEAT enable, 0 = HEART BEAT disable. HEART BEAT function is only valid in 10Mbps mode. def 1*/ + CSCR_JBEN = 1<<7, /* 1 = enable jabber function. 0 = disable jabber function, def 1*/ + CSCR_F_LINK_100 = 1<<6, /* Used to login force good link in 100Mbps for diagnostic purposes. 1 = DISABLE, 0 = ENABLE. def 1*/ + CSCR_F_Connect = 1<<5, /* Assertion of this bit forces the disconnect function to be bypassed. def 0*/ + CSCR_Con_status = 1<<3, /* This bit indicates the status of the connection. 1 = valid connected link detected; 0 = disconnected link detected. RO def 0*/ + CSCR_Con_status_En = 1<<2, /* Assertion of this bit configures LED1 pin to indicate connection status. def 0*/ + CSCR_PASS_SCR = 1<<0, /* Bypass Scramble, def 0*/ +}; + +enum Cfg9346Bits { + Cfg9346_Lock = 0x00, + Cfg9346_Unlock = 0xC0, +}; + +typedef enum { + CH_8139 = 0, + CH_8139_K, + CH_8139A, + CH_8139A_G, + CH_8139B, + CH_8130, + CH_8139C, + CH_8100, + CH_8100B_8139D, + CH_8101, +} chip_t; + +enum chip_flags { + HasHltClk = (1 << 0), + HasLWake = (1 << 1), +}; + +#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \ + (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22) +#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1) + +/* Size is 64 * 16bit words */ +#define EEPROM_9346_ADDR_BITS 6 +#define EEPROM_9346_SIZE (1 << EEPROM_9346_ADDR_BITS) +#define EEPROM_9346_ADDR_MASK (EEPROM_9346_SIZE - 1) + +enum Chip9346Operation +{ + Chip9346_op_mask = 0xc0, /* 10 zzzzzz */ + Chip9346_op_read = 0x80, /* 10 AAAAAA */ + Chip9346_op_write = 0x40, /* 01 AAAAAA D(15)..D(0) */ + Chip9346_op_ext_mask = 0xf0, /* 11 zzzzzz */ + Chip9346_op_write_enable = 0x30, /* 00 11zzzz */ + Chip9346_op_write_all = 0x10, /* 00 01zzzz */ + Chip9346_op_write_disable = 0x00, /* 00 00zzzz */ +}; + +enum Chip9346Mode +{ + Chip9346_none = 0, + Chip9346_enter_command_mode, + Chip9346_read_command, + Chip9346_data_read, /* from output register */ + Chip9346_data_write, /* to input register, then to contents at specified address */ + Chip9346_data_write_all, /* to input register, then filling contents */ +}; + +typedef struct EEprom9346 +{ + uint16_t contents[EEPROM_9346_SIZE]; + int mode; + uint32_t tick; + uint8_t address; + uint16_t input; + uint16_t output; + + uint8_t eecs; + uint8_t eesk; + uint8_t eedi; + uint8_t eedo; +} EEprom9346; + +typedef struct RTL8139State { + uint8_t phys[8]; /* mac address */ + uint8_t mult[8]; /* multicast mask array */ + + uint32_t TxStatus[4]; /* TxStatus0 */ + uint32_t TxAddr[4]; /* TxAddr0 */ + uint32_t RxBuf; /* Receive buffer */ + uint32_t RxBufferSize;/* internal variable, receive ring buffer size in C mode */ + uint32_t RxBufPtr; + uint32_t RxBufAddr; + + uint16_t IntrStatus; + uint16_t IntrMask; + + uint32_t TxConfig; + uint32_t RxConfig; + uint32_t RxMissed; + + uint16_t CSCR; + + uint8_t Cfg9346; + uint8_t Config0; + uint8_t Config1; + uint8_t Config3; + uint8_t Config4; + uint8_t Config5; + + uint8_t clock_enabled; + uint8_t bChipCmdState; + + uint16_t MultiIntr; + + uint16_t BasicModeCtrl; + uint16_t BasicModeStatus; + uint16_t NWayAdvert; + uint16_t NWayLPAR; + uint16_t NWayExpansion; + + uint16_t CpCmd; + uint8_t TxThresh; + + int irq; + PCIDevice *pci_dev; + VLANClientState *vc; + uint8_t macaddr[6]; + int rtl8139_mmio_io_addr; + + /* C ring mode */ + uint32_t currTxDesc; + + /* C+ mode */ + uint32_t currCPlusRxDesc; + uint32_t currCPlusTxDesc; + + uint32_t RxRingAddrLO; + uint32_t RxRingAddrHI; + + EEprom9346 eeprom; + +} RTL8139State; + +void prom9346_decode_command(EEprom9346 *eeprom, uint8_t command) +{ +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom command 0x%02x\n", command); +#endif + + switch (command & Chip9346_op_mask) + { + case Chip9346_op_read: + { + eeprom->address = command & EEPROM_9346_ADDR_MASK; + eeprom->output = eeprom->contents[eeprom->address]; + eeprom->eedo = 0; + eeprom->tick = 0; + eeprom->mode = Chip9346_data_read; +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom read from address 0x%02x data=0x%04x\n", + eeprom->address, eeprom->output); +#endif + } + break; + + case Chip9346_op_write: + { + eeprom->address = command & EEPROM_9346_ADDR_MASK; + eeprom->input = 0; + eeprom->tick = 0; + eeprom->mode = Chip9346_none; /* Chip9346_data_write */ +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom begin write to address 0x%02x\n", + eeprom->address); +#endif + } + break; + default: + eeprom->mode = Chip9346_none; + switch (command & Chip9346_op_ext_mask) + { + case Chip9346_op_write_enable: +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom write enabled\n"); +#endif + break; + case Chip9346_op_write_all: +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom begin write all\n"); +#endif + break; + case Chip9346_op_write_disable: +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom write disabled\n"); +#endif + break; + } + break; + } +} + +void prom9346_shift_clock(EEprom9346 *eeprom) +{ + int bit = eeprom->eedi?1:0; + + ++ eeprom->tick; + +#if defined(DEBUG_RTL8139) + printf("eeprom: tick %d eedi=%d eedo=%d\n", eeprom->tick, eeprom->eedi, eeprom->eedo); +#endif + + switch (eeprom->mode) + { + case Chip9346_enter_command_mode: + if (bit) + { + eeprom->mode = Chip9346_read_command; + eeprom->tick = 0; + eeprom->input = 0; +#if defined(DEBUG_RTL8139) + printf("eeprom: +++ synchronized, begin command read\n"); +#endif + } + break; + + case Chip9346_read_command: + eeprom->input = (eeprom->input << 1) | (bit & 1); + if (eeprom->tick == 8) + { + prom9346_decode_command(eeprom, eeprom->input & 0xff); + } + break; + + case Chip9346_data_read: + eeprom->eedo = (eeprom->output & 0x8000)?1:0; + eeprom->output <<= 1; + if (eeprom->tick == 16) + { + ++eeprom->address; + eeprom->address &= EEPROM_9346_ADDR_MASK; + eeprom->output = eeprom->contents[eeprom->address]; + eeprom->tick = 0; + +#if defined(DEBUG_RTL8139) + printf("eeprom: +++ read next address 0x%02x data=0x%04x\n", + eeprom->address, eeprom->output); +#endif + } + break; + + case Chip9346_data_write: + eeprom->input = (eeprom->input << 1) | (bit & 1); + if (eeprom->tick == 16) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom write to address 0x%02x data=0x%04x\n", + eeprom->address, eeprom->input); +#endif + eeprom->contents[eeprom->address] = eeprom->input; + eeprom->mode = Chip9346_none; /* waiting for next command after CS cycle */ + eeprom->tick = 0; + eeprom->input = 0; + } + break; + + case Chip9346_data_write_all: + eeprom->input = (eeprom->input << 1) | (bit & 1); + if (eeprom->tick == 16) + { + int i; + for (i = 0; i < EEPROM_9346_SIZE; i++) + { + eeprom->contents[i] = eeprom->input; + } +#if defined(DEBUG_RTL8139) + printf("RTL8139: eeprom filled with data=0x%04x\n", + eeprom->input); +#endif + eeprom->mode = Chip9346_enter_command_mode; + eeprom->tick = 0; + eeprom->input = 0; + } + break; + + default: + break; + } +} + +int prom9346_get_wire(RTL8139State *s) +{ + EEprom9346 *eeprom = &s->eeprom; + if (!eeprom->eecs) + return 0; + + return eeprom->eedo; +} + +void prom9346_set_wire(RTL8139State *s, int eecs, int eesk, int eedi) +{ + EEprom9346 *eeprom = &s->eeprom; + uint8_t old_eecs = eeprom->eecs; + uint8_t old_eesk = eeprom->eesk; + + eeprom->eecs = eecs; + eeprom->eesk = eesk; + eeprom->eedi = eedi; + +#if defined(DEBUG_RTL8139) + printf("eeprom: +++ wires CS=%d SK=%d DI=%d DO=%d\n", eeprom->eecs, eeprom->eesk, eeprom->eedi, eeprom->eedo); +#endif + + if (!old_eecs && eecs) + { + /* Synchronize start */ + eeprom->tick = 0; + eeprom->input = 0; + eeprom->output = 0; + eeprom->mode = Chip9346_enter_command_mode; + +#if defined(DEBUG_RTL8139) + printf("=== eeprom: begin access, enter command mode\n"); +#endif + + } + + if (!eecs) + { +#if defined(DEBUG_RTL8139) + printf("=== eeprom: end access\n"); +#endif + return; + } + + if (!old_eesk && eesk) + { + /* SK front rules */ + prom9346_shift_clock(eeprom); + } +} + +static void rtl8139_update_irq(RTL8139State *s) +{ + int isr; + isr = (s->IntrStatus & s->IntrMask) & 0xffff; +#if defined(DEBUG_RTL8139) + printf("RTL8139: Set IRQ line %d to %d (%04x %04x)\n", + s->irq, isr ? 1 : 0, s->IntrStatus, s->IntrMask); +#endif + if (s->irq == 16) { + /* PCI irq */ + pci_set_irq(s->pci_dev, 0, (isr != 0)); + } else { + /* ISA irq */ + pic_set_irq(s->irq, (isr != 0)); + } +} + +#define POLYNOMIAL 0x04c11db6 + +/* From FreeBSD */ +/* XXX: optimize */ +static int compute_mcast_idx(const uint8_t *ep) +{ + uint32_t crc; + int carry, i, j; + uint8_t b; + + crc = 0xffffffff; + for (i = 0; i < 6; i++) { + b = *ep++; + for (j = 0; j < 8; j++) { + carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01); + crc <<= 1; + b >>= 1; + if (carry) + crc = ((crc ^ POLYNOMIAL) | carry); + } + } + return (crc >> 26); +} + +static int rtl8139_RxWrap(RTL8139State *s) +{ + /* wrapping enabled; assume 1.5k more buffer space if size < 65536 */ + return (s->RxConfig & (1 << 7)); +} + +static int rtl8139_receiver_enabled(RTL8139State *s) +{ + return s->bChipCmdState & CmdRxEnb; +} + +static int rtl8139_transmitter_enabled(RTL8139State *s) +{ + return s->bChipCmdState & CmdTxEnb; +} + +static int rtl8139_cp_receiver_enabled(RTL8139State *s) +{ + return s->CpCmd & CPlusRxEnb; +} + +static int rtl8139_cp_transmitter_enabled(RTL8139State *s) +{ + return s->CpCmd & CPlusTxEnb; +} + +static void rtl8139_write_buffer(RTL8139State *s, const void *buf, int size) +{ + if (s->RxBufAddr + size > s->RxBufferSize) + { + int wrapped = MOD2(s->RxBufAddr + size, s->RxBufferSize); + + /* write packet data */ + if (wrapped && s->RxBufferSize < 65536 && !rtl8139_RxWrap(s)) + { + #if defined(DEBUG_RTL8139) + printf(">>> RTL8139: rx packet wrapped in buffer at %d\n", size-wrapped); + #endif + + if (size > wrapped) + { + cpu_physical_memory_write( s->RxBuf + s->RxBufAddr, + buf, size-wrapped ); + } + + /* reset buffer pointer */ + s->RxBufAddr = 0; + + cpu_physical_memory_write( s->RxBuf + s->RxBufAddr, + buf + (size-wrapped), wrapped ); + + s->RxBufAddr = wrapped; + + return; + } + } + + /* non-wrapping path or overwrapping enabled */ + cpu_physical_memory_write( s->RxBuf + s->RxBufAddr, buf, size ); + + s->RxBufAddr += size; +} + +#define MIN_BUF_SIZE 60 +static inline target_phys_addr_t rtl8139_addr64(uint32_t low, uint32_t high) +{ +#if TARGET_PHYS_ADDR_BITS > 32 + return low | ((target_phys_addr_t)high << 32); +#else + return low; +#endif +} + +static int rtl8139_can_receive(void *opaque) +{ + RTL8139State *s = opaque; + int avail; + + /* Recieve (drop) packets if card is disabled. */ + if (!s->clock_enabled) + return 1; + if (!rtl8139_receiver_enabled(s)) + return 1; + + if (rtl8139_cp_receiver_enabled(s)) { + /* ??? Flow control not implemented in c+ mode. + This is a hack to work around slirp deficiencies anyway. */ + return 1; + } else { + avail = MOD2(s->RxBufferSize + s->RxBufPtr - s->RxBufAddr, + s->RxBufferSize); + return (avail == 0 || avail >= 1514); + } +} + +static void rtl8139_receive(void *opaque, const uint8_t *buf, int size) +{ + RTL8139State *s = opaque; + + uint32_t packet_header = 0; + + uint8_t buf1[60]; + static const uint8_t broadcast_macaddr[6] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: received len=%d\n", size); +#endif + + /* test if board clock is stopped */ + if (!s->clock_enabled) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: stopped ==========================\n"); +#endif + return; + } + + /* first check if receiver is enabled */ + + if (!rtl8139_receiver_enabled(s)) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: receiver disabled ================\n"); +#endif + return; + } + + /* XXX: check this */ + if (s->RxConfig & AcceptAllPhys) { + /* promiscuous: receive all */ +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: packet received in promiscuous mode\n"); +#endif + + } else { + if (!memcmp(buf, broadcast_macaddr, 6)) { + /* broadcast address */ + if (!(s->RxConfig & AcceptBroadcast)) + { +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: broadcast packet rejected\n"); +#endif + return; + } + + packet_header |= RxBroadcast; + +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: broadcast packet received\n"); +#endif + } else if (buf[0] & 0x01) { + /* multicast */ + if (!(s->RxConfig & AcceptMulticast)) + { +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: multicast packet rejected\n"); +#endif + return; + } + + int mcast_idx = compute_mcast_idx(buf); + + if (!(s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7)))) + { +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: multicast address mismatch\n"); +#endif + return; + } + + packet_header |= RxMulticast; + +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: multicast packet received\n"); +#endif + } else if (s->phys[0] == buf[0] && + s->phys[1] == buf[1] && + s->phys[2] == buf[2] && + s->phys[3] == buf[3] && + s->phys[4] == buf[4] && + s->phys[5] == buf[5]) { + /* match */ + if (!(s->RxConfig & AcceptMyPhys)) + { +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: rejecting physical address matching packet\n"); +#endif + return; + } + + packet_header |= RxPhysical; + +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: physical address matching packet received\n"); +#endif + + } else { + +#if defined(DEBUG_RTL8139) + printf(">>> RTL8139: unknown packet\n"); +#endif + return; + } + } + + /* if too small buffer, then expand it */ + if (size < MIN_BUF_SIZE) { + memcpy(buf1, buf, size); + memset(buf1 + size, 0, MIN_BUF_SIZE - size); + buf = buf1; + size = MIN_BUF_SIZE; + } + + if (rtl8139_cp_receiver_enabled(s)) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: in C+ Rx mode ================\n"); +#endif + + /* begin C+ receiver mode */ + +/* w0 ownership flag */ +#define CP_RX_OWN (1<<31) +/* w0 end of ring flag */ +#define CP_RX_EOR (1<<30) +/* w0 bits 0...12 : buffer size */ +#define CP_RX_BUFFER_SIZE_MASK ((1<<13) - 1) +/* w1 tag available flag */ +#define CP_RX_TAVA (1<<16) +/* w1 bits 0...15 : VLAN tag */ +#define CP_RX_VLAN_TAG_MASK ((1<<16) - 1) +/* w2 low 32bit of Rx buffer ptr */ +/* w3 high 32bit of Rx buffer ptr */ + + int descriptor = s->currCPlusRxDesc; + target_phys_addr_t cplus_rx_ring_desc; + + cplus_rx_ring_desc = rtl8139_addr64(s->RxRingAddrLO, s->RxRingAddrHI); + cplus_rx_ring_desc += 16 * descriptor; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode reading RX descriptor %d from host memory at %08x %08x = 0x%8lx\n", + descriptor, s->RxRingAddrHI, s->RxRingAddrLO, cplus_rx_ring_desc); +#endif + + uint32_t val, rxdw0,rxdw1,rxbufLO,rxbufHI; + + cpu_physical_memory_read(cplus_rx_ring_desc, (uint8_t *)&val, 4); + rxdw0 = le32_to_cpu(val); + cpu_physical_memory_read(cplus_rx_ring_desc+4, (uint8_t *)&val, 4); + rxdw1 = le32_to_cpu(val); + cpu_physical_memory_read(cplus_rx_ring_desc+8, (uint8_t *)&val, 4); + rxbufLO = le32_to_cpu(val); + cpu_physical_memory_read(cplus_rx_ring_desc+12, (uint8_t *)&val, 4); + rxbufHI = le32_to_cpu(val); + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode RX descriptor %d %08x %08x %08x %08x\n", + descriptor, + rxdw0, rxdw1, rxbufLO, rxbufHI); +#endif + + if (!(rxdw0 & CP_RX_OWN)) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: C+ Rx mode : descriptor %d is owned by host\n", descriptor); +#endif + s->IntrStatus |= RxOverflow; + ++s->RxMissed; + rtl8139_update_irq(s); + return; + } + + uint32_t rx_space = rxdw0 & CP_RX_BUFFER_SIZE_MASK; + + if (size+4 > rx_space) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: C+ Rx mode : descriptor %d size %d received %d + 4\n", + descriptor, rx_space, size); +#endif + s->IntrStatus |= RxOverflow; + ++s->RxMissed; + rtl8139_update_irq(s); + return; + } + + target_phys_addr_t rx_addr = rtl8139_addr64(rxbufLO, rxbufHI); + + /* receive/copy to target memory */ + cpu_physical_memory_write( rx_addr, buf, size ); + + /* write checksum */ +#if defined (RTL8139_CALCULATE_RXCRC) + val = cpu_to_le32(crc32(~0, buf, size)); +#else + val = 0; +#endif + cpu_physical_memory_write( rx_addr+size, (uint8_t *)&val, 4); + +/* first segment of received packet flag */ +#define CP_RX_STATUS_FS (1<<29) +/* last segment of received packet flag */ +#define CP_RX_STATUS_LS (1<<28) +/* multicast packet flag */ +#define CP_RX_STATUS_MAR (1<<26) +/* physical-matching packet flag */ +#define CP_RX_STATUS_PAM (1<<25) +/* broadcast packet flag */ +#define CP_RX_STATUS_BAR (1<<24) +/* runt packet flag */ +#define CP_RX_STATUS_RUNT (1<<19) +/* crc error flag */ +#define CP_RX_STATUS_CRC (1<<18) +/* IP checksum error flag */ +#define CP_RX_STATUS_IPF (1<<15) +/* UDP checksum error flag */ +#define CP_RX_STATUS_UDPF (1<<14) +/* TCP checksum error flag */ +#define CP_RX_STATUS_TCPF (1<<13) + + /* transfer ownership to target */ + rxdw0 &= ~CP_RX_OWN; + + /* set first segment bit */ + rxdw0 |= CP_RX_STATUS_FS; + + /* set last segment bit */ + rxdw0 |= CP_RX_STATUS_LS; + + /* set received packet type flags */ + if (packet_header & RxBroadcast) + rxdw0 |= CP_RX_STATUS_BAR; + if (packet_header & RxMulticast) + rxdw0 |= CP_RX_STATUS_MAR; + if (packet_header & RxPhysical) + rxdw0 |= CP_RX_STATUS_PAM; + + /* set received size */ + rxdw0 &= ~CP_RX_BUFFER_SIZE_MASK; + rxdw0 |= (size+4); + + /* reset VLAN tag flag */ + rxdw1 &= ~CP_RX_TAVA; + + /* update ring data */ + val = cpu_to_le32(rxdw0); + cpu_physical_memory_write(cplus_rx_ring_desc, (uint8_t *)&val, 4); + val = cpu_to_le32(rxdw1); + cpu_physical_memory_write(cplus_rx_ring_desc+4, (uint8_t *)&val, 4); + + /* seek to next Rx descriptor */ + if (rxdw0 & CP_RX_EOR) + { + s->currCPlusRxDesc = 0; + } + else + { + ++s->currCPlusRxDesc; + } + +#if defined(DEBUG_RTL8139) + printf("RTL8139: done C+ Rx mode ----------------\n"); +#endif + + } + else + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: in ring Rx mode ================\n"); +#endif + /* begin ring receiver mode */ + int avail = MOD2(s->RxBufferSize + s->RxBufPtr - s->RxBufAddr, s->RxBufferSize); + + /* if receiver buffer is empty then avail == 0 */ + + if (avail != 0 && size + 8 >= avail) + { +#if defined(DEBUG_RTL8139) + printf("rx overflow: rx buffer length %d head 0x%04x read 0x%04x === available 0x%04x need 0x%04x\n", + s->RxBufferSize, s->RxBufAddr, s->RxBufPtr, avail, size + 8); +#endif + s->IntrStatus |= RxOverflow; + ++s->RxMissed; + rtl8139_update_irq(s); + return; + } + + packet_header |= RxStatusOK; + + packet_header |= (((size+4) << 16) & 0xffff0000); + + /* write header */ + uint32_t val = cpu_to_le32(packet_header); + + rtl8139_write_buffer(s, (uint8_t *)&val, 4); + + rtl8139_write_buffer(s, buf, size); + + /* write checksum */ +#if defined (RTL8139_CALCULATE_RXCRC) + val = cpu_to_le32(crc32(~0, buf, size)); +#else + val = 0; +#endif + + rtl8139_write_buffer(s, (uint8_t *)&val, 4); + + /* correct buffer write pointer */ + s->RxBufAddr = MOD2((s->RxBufAddr + 3) & ~0x3, s->RxBufferSize); + + /* now we can signal we have received something */ + +#if defined(DEBUG_RTL8139) + printf(" received: rx buffer length %d head 0x%04x read 0x%04x\n", + s->RxBufferSize, s->RxBufAddr, s->RxBufPtr); +#endif + + } + + s->IntrStatus |= RxOK; + rtl8139_update_irq(s); +} + +static void rtl8139_reset_rxring(RTL8139State *s, uint32_t bufferSize) +{ + s->RxBufferSize = bufferSize; + s->RxBufPtr = 0; + s->RxBufAddr = 0; +} + +static void rtl8139_reset(RTL8139State *s) +{ + int i; + + /* restore MAC address */ + memcpy(s->phys, s->macaddr, 6); + + /* reset interrupt mask */ + s->IntrStatus = 0; + s->IntrMask = 0; + + rtl8139_update_irq(s); + + /* prepare eeprom */ + s->eeprom.contents[0] = 0x8129; + memcpy(&s->eeprom.contents[7], s->macaddr, 6); + + /* mark all status registers as owned by host */ + for (i = 0; i < 4; ++i) + { + s->TxStatus[i] = TxHostOwns; + } + + s->currTxDesc = 0; + s->currCPlusRxDesc = 0; + s->currCPlusTxDesc = 0; + + s->RxRingAddrLO = 0; + s->RxRingAddrHI = 0; + + s->RxBuf = 0; + + rtl8139_reset_rxring(s, 8192); + + /* ACK the reset */ + s->TxConfig = 0; + +#if 0 +// s->TxConfig |= HW_REVID(1, 0, 0, 0, 0, 0, 0); // RTL-8139 HasHltClk + s->clock_enabled = 0; +#else + s->TxConfig |= HW_REVID(1, 1, 1, 0, 1, 0, 0); // RTL-8139C HasLWake + s->clock_enabled = 1; +#endif + + s->bChipCmdState = CmdReset; /* RxBufEmpty bit is calculated on read from ChipCmd */; + + /* set initial state data */ + s->Config0 = 0x0; /* No boot ROM */ + s->Config1 = 0xC; /* IO mapped and MEM mapped registers available */ + s->Config3 = 0x1; /* fast back-to-back compatible */ + s->Config5 = 0x0; + + s->CSCR = CSCR_F_LINK_100 | CSCR_HEART_BIT | CSCR_LD; + + s->CpCmd = 0x0; /* reset C+ mode */ + +// s->BasicModeCtrl = 0x3100; // 100Mbps, full duplex, autonegotiation +// s->BasicModeCtrl = 0x2100; // 100Mbps, full duplex + s->BasicModeCtrl = 0x1000; // autonegotiation + + s->BasicModeStatus = 0x7809; + //s->BasicModeStatus |= 0x0040; /* UTP medium */ + s->BasicModeStatus |= 0x0020; /* autonegotiation completed */ + s->BasicModeStatus |= 0x0004; /* link is up */ + + s->NWayAdvert = 0x05e1; /* all modes, full duplex */ + s->NWayLPAR = 0x05e1; /* all modes, full duplex */ + s->NWayExpansion = 0x0001; /* autonegotiation supported */ +} + +static void rtl8139_ChipCmd_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: ChipCmd write val=0x%08x\n", val); +#endif + + if (val & CmdReset) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: ChipCmd reset\n"); +#endif + rtl8139_reset(s); + } + if (val & CmdRxEnb) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: ChipCmd enable receiver\n"); +#endif + } + if (val & CmdTxEnb) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: ChipCmd enable transmitter\n"); +#endif + } + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xe3, s->bChipCmdState); + + /* Deassert reset pin before next read */ + val &= ~CmdReset; + + s->bChipCmdState = val; +} + +static int rtl8139_RxBufferEmpty(RTL8139State *s) +{ + int unread = MOD2(s->RxBufferSize + s->RxBufAddr - s->RxBufPtr, s->RxBufferSize); + + if (unread != 0) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: receiver buffer data available 0x%04x\n", unread); +#endif + return 0; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: receiver buffer is empty\n"); +#endif + + return 1; +} + +static uint32_t rtl8139_ChipCmd_read(RTL8139State *s) +{ + uint32_t ret = s->bChipCmdState; + + if (rtl8139_RxBufferEmpty(s)) + ret |= RxBufEmpty; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: ChipCmd read val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_CpCmd_write(RTL8139State *s, uint32_t val) +{ + val &= 0xffff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ command register write(w) val=0x%04x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xff84, s->CpCmd); + + s->CpCmd = val; +} + +static uint32_t rtl8139_CpCmd_read(RTL8139State *s) +{ + uint32_t ret = s->CpCmd; + +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ command register read(w) val=0x%04x\n", ret); +#endif + + return ret; +} + +int rtl8139_config_writeable(RTL8139State *s) +{ + if (s->Cfg9346 & Cfg9346_Unlock) + { + return 1; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Configuration registers are write-protected\n"); +#endif + + return 0; +} + +static void rtl8139_BasicModeCtrl_write(RTL8139State *s, uint32_t val) +{ + val &= 0xffff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: BasicModeCtrl register write(w) val=0x%04x\n", val); +#endif + + /* mask unwriteable bits */ + uint32 mask = 0x4cff; + + if (1 || !rtl8139_config_writeable(s)) + { + /* Speed setting and autonegotiation enable bits are read-only */ + mask |= 0x3000; + /* Duplex mode setting is read-only */ + mask |= 0x0100; + } + + val = SET_MASKED(val, mask, s->BasicModeCtrl); + + s->BasicModeCtrl = val; +} + +static uint32_t rtl8139_BasicModeCtrl_read(RTL8139State *s) +{ + uint32_t ret = s->BasicModeCtrl; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: BasicModeCtrl register read(w) val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_BasicModeStatus_write(RTL8139State *s, uint32_t val) +{ + val &= 0xffff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: BasicModeStatus register write(w) val=0x%04x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xff3f, s->BasicModeStatus); + + s->BasicModeStatus = val; +} + +static uint32_t rtl8139_BasicModeStatus_read(RTL8139State *s) +{ + uint32_t ret = s->BasicModeStatus; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: BasicModeStatus register read(w) val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Cfg9346_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Cfg9346 write val=0x%02x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0x31, s->Cfg9346); + + uint32_t opmode = val & 0xc0; + uint32_t eeprom_val = val & 0xf; + + if (opmode == 0x80) { + /* eeprom access */ + int eecs = (eeprom_val & 0x08)?1:0; + int eesk = (eeprom_val & 0x04)?1:0; + int eedi = (eeprom_val & 0x02)?1:0; + prom9346_set_wire(s, eecs, eesk, eedi); + } else if (opmode == 0x40) { + /* Reset. */ + val = 0; + rtl8139_reset(s); + } + + s->Cfg9346 = val; +} + +static uint32_t rtl8139_Cfg9346_read(RTL8139State *s) +{ + uint32_t ret = s->Cfg9346; + + uint32_t opmode = ret & 0xc0; + + if (opmode == 0x80) + { + /* eeprom access */ + int eedo = prom9346_get_wire(s); + if (eedo) + { + ret |= 0x01; + } + else + { + ret &= ~0x01; + } + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Cfg9346 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Config0_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config0 write val=0x%02x\n", val); +#endif + + if (!rtl8139_config_writeable(s)) + return; + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xf8, s->Config0); + + s->Config0 = val; +} + +static uint32_t rtl8139_Config0_read(RTL8139State *s) +{ + uint32_t ret = s->Config0; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config0 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Config1_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config1 write val=0x%02x\n", val); +#endif + + if (!rtl8139_config_writeable(s)) + return; + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xC, s->Config1); + + s->Config1 = val; +} + +static uint32_t rtl8139_Config1_read(RTL8139State *s) +{ + uint32_t ret = s->Config1; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config1 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Config3_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config3 write val=0x%02x\n", val); +#endif + + if (!rtl8139_config_writeable(s)) + return; + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0x8F, s->Config3); + + s->Config3 = val; +} + +static uint32_t rtl8139_Config3_read(RTL8139State *s) +{ + uint32_t ret = s->Config3; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config3 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Config4_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config4 write val=0x%02x\n", val); +#endif + + if (!rtl8139_config_writeable(s)) + return; + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0x0a, s->Config4); + + s->Config4 = val; +} + +static uint32_t rtl8139_Config4_read(RTL8139State *s) +{ + uint32_t ret = s->Config4; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config4 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_Config5_write(RTL8139State *s, uint32_t val) +{ + val &= 0xff; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config5 write val=0x%02x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0x80, s->Config5); + + s->Config5 = val; +} + +static uint32_t rtl8139_Config5_read(RTL8139State *s) +{ + uint32_t ret = s->Config5; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: Config5 read val=0x%02x\n", ret); +#endif + + return ret; +} + +static void rtl8139_TxConfig_write(RTL8139State *s, uint32_t val) +{ + if (!rtl8139_transmitter_enabled(s)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: transmitter disabled; no TxConfig write val=0x%08x\n", val); +#endif + return; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxConfig write val=0x%08x\n", val); +#endif + + val = SET_MASKED(val, TxVersionMask | 0x8070f80f, s->TxConfig); + + s->TxConfig = val; +} + +static void rtl8139_TxConfig_writeb(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139C TxConfig via write(b) val=0x%02x\n", val); +#endif + uint32_t tc = s->TxConfig; + tc &= 0xFFFFFF00; + tc |= (val & 0x000000FF); + rtl8139_TxConfig_write(s, tc); +} + +static uint32_t rtl8139_TxConfig_read(RTL8139State *s) +{ + uint32_t ret = s->TxConfig; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxConfig read val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_RxConfig_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxConfig write val=0x%08x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xf0fc0040, s->RxConfig); + + s->RxConfig = val; + + /* reset buffer size and read/write pointers */ + rtl8139_reset_rxring(s, 8192 << ((s->RxConfig >> 11) & 0x3)); + +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxConfig write reset buffer size to %d\n", s->RxBufferSize); +#endif +} + +static uint32_t rtl8139_RxConfig_read(RTL8139State *s) +{ + uint32_t ret = s->RxConfig; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxConfig read val=0x%08x\n", ret); +#endif + + return ret; +} + +static int rtl8139_transmit_one(RTL8139State *s, int descriptor) +{ + if (!rtl8139_transmitter_enabled(s)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ cannot transmit from descriptor %d: transmitter disabled\n", descriptor); +#endif + return 0; + } + + if (s->TxStatus[descriptor] & TxHostOwns) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ cannot transmit from descriptor %d: owned by host (%08x)\n", descriptor, s->TxStatus[descriptor]); +#endif + return 0; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ transmitting from descriptor %d\n", descriptor); +#endif + + int txsize = s->TxStatus[descriptor] & 0x1fff; + uint8_t txbuffer[0x2000]; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ transmit reading %d bytes from host memory at 0x%08x\n", txsize, s->TxAddr[descriptor]); +#endif + cpu_physical_memory_read(s->TxAddr[descriptor], txbuffer, txsize); + + qemu_send_packet(s->vc, txbuffer, txsize); + + /* Mark descriptor as transferred */ + s->TxStatus[descriptor] |= TxHostOwns; + s->TxStatus[descriptor] |= TxStatOK; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ transmitted %d bytes from descriptor %d\n", txsize, descriptor); +#endif + + /* update interrupt */ + s->IntrStatus |= TxOK; + rtl8139_update_irq(s); + + return 1; +} + +static int rtl8139_cplus_transmit_one(RTL8139State *s) +{ + if (!rtl8139_transmitter_enabled(s)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode: transmitter disabled\n"); +#endif + return 0; + } + + if (!rtl8139_cp_transmitter_enabled(s)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode: C+ transmitter disabled\n"); +#endif + return 0 ; + } + + int descriptor = s->currCPlusTxDesc; + + target_phys_addr_t cplus_tx_ring_desc = + rtl8139_addr64(s->TxAddr[0], s->TxAddr[1]); + + /* Normal priority ring */ + cplus_tx_ring_desc += 16 * descriptor; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode reading TX descriptor %d from host memory at %08x0x%08x = 0x%8lx\n", + descriptor, s->TxAddr[1], s->TxAddr[0], cplus_tx_ring_desc); +#endif + + uint32_t val, txdw0,txdw1,txbufLO,txbufHI; + + cpu_physical_memory_read(cplus_tx_ring_desc, (uint8_t *)&val, 4); + txdw0 = le32_to_cpu(val); + cpu_physical_memory_read(cplus_tx_ring_desc+4, (uint8_t *)&val, 4); + txdw1 = le32_to_cpu(val); + cpu_physical_memory_read(cplus_tx_ring_desc+8, (uint8_t *)&val, 4); + txbufLO = le32_to_cpu(val); + cpu_physical_memory_read(cplus_tx_ring_desc+12, (uint8_t *)&val, 4); + txbufHI = le32_to_cpu(val); + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode TX descriptor %d %08x %08x %08x %08x\n", + descriptor, + txdw0, txdw1, txbufLO, txbufHI); +#endif + +/* w0 ownership flag */ +#define CP_TX_OWN (1<<31) +/* w0 end of ring flag */ +#define CP_TX_EOR (1<<30) +/* first segment of received packet flag */ +#define CP_TX_FS (1<<29) +/* last segment of received packet flag */ +#define CP_TX_LS (1<<28) +/* large send packet flag */ +#define CP_TX_LGSEN (1<<27) +/* IP checksum offload flag */ +#define CP_TX_IPCS (1<<18) +/* UDP checksum offload flag */ +#define CP_TX_UDPCS (1<<17) +/* TCP checksum offload flag */ +#define CP_TX_TCPCS (1<<16) + +/* w0 bits 0...15 : buffer size */ +#define CP_TX_BUFFER_SIZE (1<<16) +#define CP_TX_BUFFER_SIZE_MASK (CP_TX_BUFFER_SIZE - 1) +/* w1 tag available flag */ +#define CP_RX_TAGC (1<<17) +/* w1 bits 0...15 : VLAN tag */ +#define CP_TX_VLAN_TAG_MASK ((1<<16) - 1) +/* w2 low 32bit of Rx buffer ptr */ +/* w3 high 32bit of Rx buffer ptr */ + +/* set after transmission */ +/* FIFO underrun flag */ +#define CP_TX_STATUS_UNF (1<<25) +/* transmit error summary flag, valid if set any of three below */ +#define CP_TX_STATUS_TES (1<<23) +/* out-of-window collision flag */ +#define CP_TX_STATUS_OWC (1<<22) +/* link failure flag */ +#define CP_TX_STATUS_LNKF (1<<21) +/* excessive collisions flag */ +#define CP_TX_STATUS_EXC (1<<20) + + if (!(txdw0 & CP_TX_OWN)) + { +#if defined(DEBUG_RTL8139) + printf("RTL8139: C+ Tx mode : descriptor %d is owned by host\n", descriptor); +#endif + return 0 ; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ Tx mode : transmitting from descriptor %d\n", descriptor); +#endif + + int txsize = txdw0 & CP_TX_BUFFER_SIZE_MASK; + target_phys_addr_t tx_addr = rtl8139_addr64(txbufLO, txbufHI); + + uint8_t txbuffer[CP_TX_BUFFER_SIZE]; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode transmit reading %d bytes from host memory at 0x%08x\n", txsize, tx_addr); +#endif + cpu_physical_memory_read(tx_addr, txbuffer, txsize); + + /* transmit the packet */ + qemu_send_packet(s->vc, txbuffer, txsize); + + /* transfer ownership to target */ + txdw0 &= ~CP_RX_OWN; + + /* reset error indicator bits */ + txdw0 &= ~CP_TX_STATUS_UNF; + txdw0 &= ~CP_TX_STATUS_TES; + txdw0 &= ~CP_TX_STATUS_OWC; + txdw0 &= ~CP_TX_STATUS_LNKF; + txdw0 &= ~CP_TX_STATUS_EXC; + + /* update ring data */ + val = cpu_to_le32(txdw0); + cpu_physical_memory_write(cplus_tx_ring_desc, (uint8_t *)&val, 4); +// val = cpu_to_le32(txdw1); +// cpu_physical_memory_write(cplus_tx_ring_desc+4, &val, 4); + + /* seek to next Rx descriptor */ + if (txdw0 & CP_TX_EOR) + { + s->currCPlusTxDesc = 0; + } + else + { + ++s->currCPlusTxDesc; + } + +#ifdef DEBUG_RTL8139 + printf("RTL8139: +++ C+ mode transmitted %d bytes from descriptor %d\n", txsize, descriptor); +#endif + return 1; +} + +static void rtl8139_cplus_transmit(RTL8139State *s) +{ + int txcount = 0; + + while (rtl8139_cplus_transmit_one(s)) + { + ++txcount; + } + + /* Mark transfer completed */ + if (!txcount) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: C+ mode : transmitter queue stalled, current TxDesc = %d\n", s->currCPlusTxDesc); +#endif + } + else + { + /* update interrupt status */ + s->IntrStatus |= TxOK; + rtl8139_update_irq(s); + } +} + +static void rtl8139_transmit(RTL8139State *s) +{ + int descriptor = s->currTxDesc, txcount = 0; + + /*while*/ + if (rtl8139_transmit_one(s, descriptor)) + { + ++s->currTxDesc; + s->currTxDesc %= 4; + ++txcount; + } + + /* Mark transfer completed */ + if (!txcount) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139: transmitter queue stalled, current TxDesc = %d\n", s->currTxDesc); +#endif + } +} + +static void rtl8139_TxStatus_write(RTL8139State *s, uint32_t txRegOffset, uint32_t val) +{ + + int descriptor = txRegOffset/4; +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxStatus write offset=0x%x val=0x%08x descriptor=%d\n", txRegOffset, val, descriptor); +#endif + + /* mask only reserved bits */ + val &= ~0xff00c000; /* these bits are reset on write */ + val = SET_MASKED(val, 0x00c00000, s->TxStatus[descriptor]); + + s->TxStatus[descriptor] = val; + + /* attempt to start transmission */ + rtl8139_transmit(s); +} + +static uint32_t rtl8139_TxStatus_read(RTL8139State *s, uint32_t txRegOffset) +{ + uint32_t ret = s->TxStatus[txRegOffset/4]; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxStatus read offset=0x%x val=0x%08x\n", txRegOffset, ret); +#endif + + return ret; +} + +static uint16_t rtl8139_TSAD_read(RTL8139State *s) +{ + uint16_t ret = 0; + + /* Simulate TSAD, it is read only anyway */ + + ret = ((s->TxStatus[3] & TxStatOK )?TSAD_TOK3:0) + |((s->TxStatus[2] & TxStatOK )?TSAD_TOK2:0) + |((s->TxStatus[1] & TxStatOK )?TSAD_TOK1:0) + |((s->TxStatus[0] & TxStatOK )?TSAD_TOK0:0) + + |((s->TxStatus[3] & TxUnderrun)?TSAD_TUN3:0) + |((s->TxStatus[2] & TxUnderrun)?TSAD_TUN2:0) + |((s->TxStatus[1] & TxUnderrun)?TSAD_TUN1:0) + |((s->TxStatus[0] & TxUnderrun)?TSAD_TUN0:0) + + |((s->TxStatus[3] & TxAborted )?TSAD_TABT3:0) + |((s->TxStatus[2] & TxAborted )?TSAD_TABT2:0) + |((s->TxStatus[1] & TxAborted )?TSAD_TABT1:0) + |((s->TxStatus[0] & TxAborted )?TSAD_TABT0:0) + + |((s->TxStatus[3] & TxHostOwns )?TSAD_OWN3:0) + |((s->TxStatus[2] & TxHostOwns )?TSAD_OWN2:0) + |((s->TxStatus[1] & TxHostOwns )?TSAD_OWN1:0) + |((s->TxStatus[0] & TxHostOwns )?TSAD_OWN0:0) ; + + +#ifdef DEBUG_RTL8139 + printf("RTL8139: TSAD read val=0x%04x\n", ret); +#endif + + return ret; +} + +static uint16_t rtl8139_CSCR_read(RTL8139State *s) +{ + uint16_t ret = s->CSCR; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: CSCR read val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_TxAddr_write(RTL8139State *s, uint32_t txAddrOffset, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxAddr write offset=0x%x val=0x%08x\n", txAddrOffset, val); +#endif + + s->TxAddr[txAddrOffset/4] = le32_to_cpu(val); +} + +static uint32_t rtl8139_TxAddr_read(RTL8139State *s, uint32_t txAddrOffset) +{ + uint32_t ret = cpu_to_le32(s->TxAddr[txAddrOffset/4]); + +#ifdef DEBUG_RTL8139 + printf("RTL8139: TxAddr read offset=0x%x val=0x%08x\n", txAddrOffset, ret); +#endif + + return ret; +} + +static void rtl8139_RxBufPtr_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxBufPtr write val=0x%04x\n", val); +#endif + + /* this value is off by 16 */ + s->RxBufPtr = MOD2(val + 0x10, s->RxBufferSize); + +#if defined(DEBUG_RTL8139) + printf(" CAPR write: rx buffer length %d head 0x%04x read 0x%04x\n", + s->RxBufferSize, s->RxBufAddr, s->RxBufPtr); +#endif +} + +static uint32_t rtl8139_RxBufPtr_read(RTL8139State *s) +{ + /* this value is off by 16 */ + uint32_t ret = s->RxBufPtr - 0x10; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxBufPtr read val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_RxBuf_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxBuf write val=0x%08x\n", val); +#endif + + s->RxBuf = val; + + /* may need to reset rxring here */ +} + +static uint32_t rtl8139_RxBuf_read(RTL8139State *s) +{ + uint32_t ret = s->RxBuf; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxBuf read val=0x%08x\n", ret); +#endif + + return ret; +} + +static void rtl8139_IntrMask_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: IntrMask write(w) val=0x%04x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0x1e00, s->IntrMask); + + s->IntrMask = val; + + rtl8139_update_irq(s); +} + +static uint32_t rtl8139_IntrMask_read(RTL8139State *s) +{ + uint32_t ret = s->IntrMask; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: IntrMask read(w) val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_IntrStatus_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: IntrStatus write(w) val=0x%04x\n", val); +#endif + +#if 0 + + /* writing to ISR has no effect */ + + return; + +#else + uint16_t newStatus = s->IntrStatus & ~val; + + /* mask unwriteable bits */ + newStatus = SET_MASKED(newStatus, 0x1e00, s->IntrStatus); + + /* writing 1 to interrupt status register bit clears it */ + s->IntrStatus = 0; + rtl8139_update_irq(s); + + s->IntrStatus = newStatus; + rtl8139_update_irq(s); +#endif +} + +static uint32_t rtl8139_IntrStatus_read(RTL8139State *s) +{ + uint32_t ret = s->IntrStatus; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: IntrStatus read(w) val=0x%04x\n", ret); +#endif + +#if 0 + + /* reading ISR clears all interrupts */ + s->IntrStatus = 0; + + rtl8139_update_irq(s); + +#endif + + return ret; +} + +static void rtl8139_MultiIntr_write(RTL8139State *s, uint32_t val) +{ +#ifdef DEBUG_RTL8139 + printf("RTL8139: MultiIntr write(w) val=0x%04x\n", val); +#endif + + /* mask unwriteable bits */ + val = SET_MASKED(val, 0xf000, s->MultiIntr); + + s->MultiIntr = val; +} + +static uint32_t rtl8139_MultiIntr_read(RTL8139State *s) +{ + uint32_t ret = s->MultiIntr; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: MultiIntr read(w) val=0x%04x\n", ret); +#endif + + return ret; +} + +static void rtl8139_io_writeb(void *opaque, uint8_t addr, uint32_t val) +{ + RTL8139State *s = opaque; + + addr &= 0xff; + + switch (addr) + { + case MAC0 ... MAC0+5: + s->phys[addr - MAC0] = val; + break; + case MAC0+6 ... MAC0+7: + /* reserved */ + break; + case MAR0 ... MAR0+7: + s->mult[addr - MAR0] = val; + break; + case ChipCmd: + rtl8139_ChipCmd_write(s, val); + break; + case Cfg9346: + rtl8139_Cfg9346_write(s, val); + break; + case TxConfig: /* windows driver sometimes writes using byte-lenth call */ + rtl8139_TxConfig_writeb(s, val); + break; + case Config0: + rtl8139_Config0_write(s, val); + break; + case Config1: + rtl8139_Config1_write(s, val); + break; + case Config3: + rtl8139_Config3_write(s, val); + break; + case Config4: + rtl8139_Config4_write(s, val); + break; + case Config5: + rtl8139_Config5_write(s, val); + break; + case MediaStatus: + /* ignore */ +#ifdef DEBUG_RTL8139 + printf("RTL8139: not implemented write(b) to MediaStatus val=0x%02x\n", val); +#endif + break; + + case HltClk: +#ifdef DEBUG_RTL8139 + printf("RTL8139: HltClk write val=0x%08x\n", val); +#endif + if (val == 'R') + { + s->clock_enabled = 1; + } + else if (val == 'H') + { + s->clock_enabled = 0; + } + break; + + case TxThresh: +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ TxThresh write(b) val=0x%02x\n", val); +#endif + s->TxThresh = val; + break; + + case TxPoll: +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ TxPoll write(b) val=0x%02x\n", val); +#endif + if (val & (1 << 7)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ TxPoll high priority transmission (not implemented)\n"); +#endif + //rtl8139_cplus_transmit(s); + } + if (val & (1 << 6)) + { +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ TxPoll normal priority transmission\n"); +#endif + rtl8139_cplus_transmit(s); + } + + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: not implemented write(b) addr=0x%x val=0x%02x\n", addr, val); +#endif + break; + } +} + +static void rtl8139_io_writew(void *opaque, uint8_t addr, uint32_t val) +{ + RTL8139State *s = opaque; + + addr &= 0xfe; + + switch (addr) + { + case IntrMask: + rtl8139_IntrMask_write(s, val); + break; + + case IntrStatus: + rtl8139_IntrStatus_write(s, val); + break; + + case MultiIntr: + rtl8139_MultiIntr_write(s, val); + break; + + case RxBufPtr: + rtl8139_RxBufPtr_write(s, val); + break; + + case BasicModeCtrl: + rtl8139_BasicModeCtrl_write(s, val); + break; + case BasicModeStatus: + rtl8139_BasicModeStatus_write(s, val); + break; + case NWayAdvert: +#ifdef DEBUG_RTL8139 + printf("RTL8139: NWayAdvert write(w) val=0x%04x\n", val); +#endif + s->NWayAdvert = val; + break; + case NWayLPAR: +#ifdef DEBUG_RTL8139 + printf("RTL8139: forbidden NWayLPAR write(w) val=0x%04x\n", val); +#endif + break; + case NWayExpansion: +#ifdef DEBUG_RTL8139 + printf("RTL8139: NWayExpansion write(w) val=0x%04x\n", val); +#endif + s->NWayExpansion = val; + break; + + case CpCmd: + rtl8139_CpCmd_write(s, val); + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: ioport write(w) addr=0x%x val=0x%04x via write(b)\n", addr, val); +#endif + +#ifdef TARGET_WORDS_BIGENDIAN + rtl8139_io_writeb(opaque, addr, (val >> 8) & 0xff); + rtl8139_io_writeb(opaque, addr + 1, val & 0xff); +#else + rtl8139_io_writeb(opaque, addr, val & 0xff); + rtl8139_io_writeb(opaque, addr + 1, (val >> 8) & 0xff); +#endif + break; + } +} + +static void rtl8139_io_writel(void *opaque, uint8_t addr, uint32_t val) +{ + RTL8139State *s = opaque; + + addr &= 0xfc; + + switch (addr) + { + case RxMissed: +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxMissed clearing on write\n"); +#endif + s->RxMissed = 0; + break; + + case TxConfig: + rtl8139_TxConfig_write(s, val); + break; + + case RxConfig: + rtl8139_RxConfig_write(s, val); + break; + + case TxStatus0 ... TxStatus0+4*4-1: + rtl8139_TxStatus_write(s, addr-TxStatus0, val); + break; + + case TxAddr0 ... TxAddr0+4*4-1: + rtl8139_TxAddr_write(s, addr-TxAddr0, val); + break; + + case RxBuf: + rtl8139_RxBuf_write(s, val); + break; + + case RxRingAddrLO: +#ifdef DEBUG_RTL8139 + printf("RTL8139: C+ RxRing low bits write val=0x%08x\n", val); +#endif + s->RxRingAddrLO = val; + break; + + case RxRingAddrHI: +#ifdef DEBUG_RTL8139 + printf("RTL8139: C+ RxRing high bits write val=0x%08x\n", val); +#endif + s->RxRingAddrHI = val; + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: ioport write(l) addr=0x%x val=0x%08x via write(b)\n", addr, val); +#endif +#ifdef TARGET_WORDS_BIGENDIAN + rtl8139_io_writeb(opaque, addr, (val >> 24) & 0xff); + rtl8139_io_writeb(opaque, addr + 1, (val >> 16) & 0xff); + rtl8139_io_writeb(opaque, addr + 2, (val >> 8) & 0xff); + rtl8139_io_writeb(opaque, addr + 3, val & 0xff); +#else + rtl8139_io_writeb(opaque, addr, val & 0xff); + rtl8139_io_writeb(opaque, addr + 1, (val >> 8) & 0xff); + rtl8139_io_writeb(opaque, addr + 2, (val >> 16) & 0xff); + rtl8139_io_writeb(opaque, addr + 3, (val >> 24) & 0xff); +#endif + break; + } +} + +static uint32_t rtl8139_io_readb(void *opaque, uint8_t addr) +{ + RTL8139State *s = opaque; + int ret; + + addr &= 0xff; + + switch (addr) + { + case MAC0 ... MAC0+5: + ret = s->phys[addr - MAC0]; + break; + case MAC0+6 ... MAC0+7: + ret = 0; + break; + case MAR0 ... MAR0+7: + ret = s->mult[addr - MAR0]; + break; + case ChipCmd: + ret = rtl8139_ChipCmd_read(s); + break; + case Cfg9346: + ret = rtl8139_Cfg9346_read(s); + break; + case Config0: + ret = rtl8139_Config0_read(s); + break; + case Config1: + ret = rtl8139_Config1_read(s); + break; + case Config3: + ret = rtl8139_Config3_read(s); + break; + case Config4: + ret = rtl8139_Config4_read(s); + break; + case Config5: + ret = rtl8139_Config5_read(s); + break; + + case MediaStatus: + ret = 0xd0; +#ifdef DEBUG_RTL8139 + printf("RTL8139: MediaStatus read 0x%x\n", ret); +#endif + break; + + case HltClk: + ret = s->clock_enabled; +#ifdef DEBUG_RTL8139 + printf("RTL8139: HltClk read 0x%x\n", ret); +#endif + break; + + case PCIRevisionID: + ret = 0x10; +#ifdef DEBUG_RTL8139 + printf("RTL8139: PCI Revision ID read 0x%x\n", ret); +#endif + break; + + case TxThresh: + ret = s->TxThresh; +#ifdef DEBUG_RTL8139 + printf("RTL8139C+ TxThresh read(b) val=0x%02x\n", ret); +#endif + break; + + case 0x43: /* Part of TxConfig register. Windows driver tries to read it */ + ret = s->TxConfig >> 24; +#ifdef DEBUG_RTL8139 + printf("RTL8139C TxConfig at 0x43 read(b) val=0x%02x\n", ret); +#endif + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: not implemented read(b) addr=0x%x\n", addr); +#endif + ret = 0; + break; + } + + return ret; +} + +static uint32_t rtl8139_io_readw(void *opaque, uint8_t addr) +{ + RTL8139State *s = opaque; + uint32_t ret; + + addr &= 0xfe; /* mask lower bit */ + + switch (addr) + { + case IntrMask: + ret = rtl8139_IntrMask_read(s); + break; + + case IntrStatus: + ret = rtl8139_IntrStatus_read(s); + break; + + case MultiIntr: + ret = rtl8139_MultiIntr_read(s); + break; + + case RxBufPtr: + ret = rtl8139_RxBufPtr_read(s); + break; + + case BasicModeCtrl: + ret = rtl8139_BasicModeCtrl_read(s); + break; + case BasicModeStatus: + ret = rtl8139_BasicModeStatus_read(s); + break; + case NWayAdvert: + ret = s->NWayAdvert; +#ifdef DEBUG_RTL8139 + printf("RTL8139: NWayAdvert read(w) val=0x%04x\n", ret); +#endif + break; + case NWayLPAR: + ret = s->NWayLPAR; +#ifdef DEBUG_RTL8139 + printf("RTL8139: NWayLPAR read(w) val=0x%04x\n", ret); +#endif + break; + case NWayExpansion: + ret = s->NWayExpansion; +#ifdef DEBUG_RTL8139 + printf("RTL8139: NWayExpansion read(w) val=0x%04x\n", ret); +#endif + break; + + case CpCmd: + ret = rtl8139_CpCmd_read(s); + break; + + case TxSummary: + ret = rtl8139_TSAD_read(s); + break; + + case CSCR: + ret = rtl8139_CSCR_read(s); + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: ioport read(w) addr=0x%x via read(b)\n", addr); +#endif + +#ifdef TARGET_WORDS_BIGENDIAN + ret = rtl8139_io_readb(opaque, addr) << 8; + ret |= rtl8139_io_readb(opaque, addr + 1); +#else + ret = rtl8139_io_readb(opaque, addr); + ret |= rtl8139_io_readb(opaque, addr + 1) << 8; +#endif + +#ifdef DEBUG_RTL8139 + printf("RTL8139: ioport read(w) addr=0x%x val=0x%04x\n", addr, ret); +#endif + break; + } + + return ret; +} + +static uint32_t rtl8139_io_readl(void *opaque, uint8_t addr) +{ + RTL8139State *s = opaque; + uint32_t ret; + + addr &= 0xfc; /* also mask low 2 bits */ + + switch (addr) + { + case RxMissed: + ret = s->RxMissed; + +#ifdef DEBUG_RTL8139 + printf("RTL8139: RxMissed read val=0x%08x\n", ret); +#endif + break; + + case TxConfig: + ret = rtl8139_TxConfig_read(s); + break; + + case RxConfig: + ret = rtl8139_RxConfig_read(s); + break; + + case TxStatus0 ... TxStatus0+4*4-1: + ret = rtl8139_TxStatus_read(s, addr-TxStatus0); + break; + + case TxAddr0 ... TxAddr0+4*4-1: + ret = rtl8139_TxAddr_read(s, addr-TxAddr0); + break; + + case RxBuf: + ret = rtl8139_RxBuf_read(s); + break; + + case RxRingAddrLO: + ret = s->RxRingAddrLO; +#ifdef DEBUG_RTL8139 + printf("RTL8139: C+ RxRing low bits read val=0x%08x\n", ret); +#endif + break; + + case RxRingAddrHI: + ret = s->RxRingAddrHI; +#ifdef DEBUG_RTL8139 + printf("RTL8139: C+ RxRing high bits read val=0x%08x\n", ret); +#endif + break; + + default: +#ifdef DEBUG_RTL8139 + printf("RTL8139: ioport read(l) addr=0x%x via read(b)\n", addr); +#endif + +#ifdef TARGET_WORDS_BIGENDIAN + ret = rtl8139_io_readb(opaque, addr) << 24; + ret |= rtl8139_io_readb(opaque, addr + 1) << 16; + ret |= rtl8139_io_readb(opaque, addr + 2) << 8; + ret |= rtl8139_io_readb(opaque, addr + 3); +#else + ret = rtl8139_io_readb(opaque, addr); + ret |= rtl8139_io_readb(opaque, addr + 1) << 8; + ret |= rtl8139_io_readb(opaque, addr + 2) << 16; + ret |= rtl8139_io_readb(opaque, addr + 3) << 24; +#endif + +#ifdef DEBUG_RTL8139 + printf("RTL8139: read(l) addr=0x%x val=%08x\n", addr, ret); +#endif + break; + } + + return ret; +} + +/* */ + +static void rtl8139_ioport_writeb(void *opaque, uint32_t addr, uint32_t val) +{ + rtl8139_io_writeb(opaque, addr & 0xFF, val); +} + +static void rtl8139_ioport_writew(void *opaque, uint32_t addr, uint32_t val) +{ + rtl8139_io_writew(opaque, addr & 0xFF, val); +} + +static void rtl8139_ioport_writel(void *opaque, uint32_t addr, uint32_t val) +{ + rtl8139_io_writel(opaque, addr & 0xFF, val); +} + +static uint32_t rtl8139_ioport_readb(void *opaque, uint32_t addr) +{ + return rtl8139_io_readb(opaque, addr & 0xFF); +} + +static uint32_t rtl8139_ioport_readw(void *opaque, uint32_t addr) +{ + return rtl8139_io_readw(opaque, addr & 0xFF); +} + +static uint32_t rtl8139_ioport_readl(void *opaque, uint32_t addr) +{ + return rtl8139_io_readl(opaque, addr & 0xFF); +} + +/* */ + +static void rtl8139_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val) +{ + rtl8139_io_writeb(opaque, addr & 0xFF, val); +} + +static void rtl8139_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val) +{ + rtl8139_io_writew(opaque, addr & 0xFF, val); +} + +static void rtl8139_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val) +{ + rtl8139_io_writel(opaque, addr & 0xFF, val); +} + +static uint32_t rtl8139_mmio_readb(void *opaque, target_phys_addr_t addr) +{ + return rtl8139_io_readb(opaque, addr & 0xFF); +} + +static uint32_t rtl8139_mmio_readw(void *opaque, target_phys_addr_t addr) +{ + return rtl8139_io_readw(opaque, addr & 0xFF); +} + +static uint32_t rtl8139_mmio_readl(void *opaque, target_phys_addr_t addr) +{ + return rtl8139_io_readl(opaque, addr & 0xFF); +} + +/* */ + +static void rtl8139_save(QEMUFile* f,void* opaque) +{ + RTL8139State* s=(RTL8139State*)opaque; + int i; + + qemu_put_buffer(f, s->phys, 6); + qemu_put_buffer(f, s->mult, 8); + + for (i=0; i<4; ++i) + { + qemu_put_be32s(f, &s->TxStatus[i]); /* TxStatus0 */ + } + for (i=0; i<4; ++i) + { + qemu_put_be32s(f, &s->TxAddr[i]); /* TxAddr0 */ + } + + qemu_put_be32s(f, &s->RxBuf); /* Receive buffer */ + qemu_put_be32s(f, &s->RxBufferSize);/* internal variable, receive ring buffer size in C mode */ + qemu_put_be32s(f, &s->RxBufPtr); + qemu_put_be32s(f, &s->RxBufAddr); + + qemu_put_be16s(f, &s->IntrStatus); + qemu_put_be16s(f, &s->IntrMask); + + qemu_put_be32s(f, &s->TxConfig); + qemu_put_be32s(f, &s->RxConfig); + qemu_put_be32s(f, &s->RxMissed); + qemu_put_be16s(f, &s->CSCR); + + qemu_put_8s(f, &s->Cfg9346); + qemu_put_8s(f, &s->Config0); + qemu_put_8s(f, &s->Config1); + qemu_put_8s(f, &s->Config3); + qemu_put_8s(f, &s->Config4); + qemu_put_8s(f, &s->Config5); + + qemu_put_8s(f, &s->clock_enabled); + qemu_put_8s(f, &s->bChipCmdState); + + qemu_put_be16s(f, &s->MultiIntr); + + qemu_put_be16s(f, &s->BasicModeCtrl); + qemu_put_be16s(f, &s->BasicModeStatus); + qemu_put_be16s(f, &s->NWayAdvert); + qemu_put_be16s(f, &s->NWayLPAR); + qemu_put_be16s(f, &s->NWayExpansion); + + qemu_put_be16s(f, &s->CpCmd); + qemu_put_8s(f, &s->TxThresh); + + qemu_put_be32s(f, &s->irq); + qemu_put_buffer(f, s->macaddr, 6); + qemu_put_be32s(f, &s->rtl8139_mmio_io_addr); + + qemu_put_be32s(f, &s->currTxDesc); + qemu_put_be32s(f, &s->currCPlusRxDesc); + qemu_put_be32s(f, &s->currCPlusTxDesc); + qemu_put_be32s(f, &s->RxRingAddrLO); + qemu_put_be32s(f, &s->RxRingAddrHI); + + for (i=0; i<EEPROM_9346_SIZE; ++i) + { + qemu_put_be16s(f, &s->eeprom.contents[i]); + } + qemu_put_be32s(f, &s->eeprom.mode); + qemu_put_be32s(f, &s->eeprom.tick); + qemu_put_8s(f, &s->eeprom.address); + qemu_put_be16s(f, &s->eeprom.input); + qemu_put_be16s(f, &s->eeprom.output); + + qemu_put_8s(f, &s->eeprom.eecs); + qemu_put_8s(f, &s->eeprom.eesk); + qemu_put_8s(f, &s->eeprom.eedi); + qemu_put_8s(f, &s->eeprom.eedo); +} + +static int rtl8139_load(QEMUFile* f,void* opaque,int version_id) +{ + RTL8139State* s=(RTL8139State*)opaque; + int i; + + if (version_id != 1) + return -EINVAL; + + qemu_get_buffer(f, s->phys, 6); + qemu_get_buffer(f, s->mult, 8); + + for (i=0; i<4; ++i) + { + qemu_get_be32s(f, &s->TxStatus[i]); /* TxStatus0 */ + } + for (i=0; i<4; ++i) + { + qemu_get_be32s(f, &s->TxAddr[i]); /* TxAddr0 */ + } + + qemu_get_be32s(f, &s->RxBuf); /* Receive buffer */ + qemu_get_be32s(f, &s->RxBufferSize);/* internal variable, receive ring buffer size in C mode */ + qemu_get_be32s(f, &s->RxBufPtr); + qemu_get_be32s(f, &s->RxBufAddr); + + qemu_get_be16s(f, &s->IntrStatus); + qemu_get_be16s(f, &s->IntrMask); + + qemu_get_be32s(f, &s->TxConfig); + qemu_get_be32s(f, &s->RxConfig); + qemu_get_be32s(f, &s->RxMissed); + qemu_get_be16s(f, &s->CSCR); + + qemu_get_8s(f, &s->Cfg9346); + qemu_get_8s(f, &s->Config0); + qemu_get_8s(f, &s->Config1); + qemu_get_8s(f, &s->Config3); + qemu_get_8s(f, &s->Config4); + qemu_get_8s(f, &s->Config5); + + qemu_get_8s(f, &s->clock_enabled); + qemu_get_8s(f, &s->bChipCmdState); + + qemu_get_be16s(f, &s->MultiIntr); + + qemu_get_be16s(f, &s->BasicModeCtrl); + qemu_get_be16s(f, &s->BasicModeStatus); + qemu_get_be16s(f, &s->NWayAdvert); + qemu_get_be16s(f, &s->NWayLPAR); + qemu_get_be16s(f, &s->NWayExpansion); + + qemu_get_be16s(f, &s->CpCmd); + qemu_get_8s(f, &s->TxThresh); + + qemu_get_be32s(f, &s->irq); + qemu_get_buffer(f, s->macaddr, 6); + qemu_get_be32s(f, &s->rtl8139_mmio_io_addr); + + qemu_get_be32s(f, &s->currTxDesc); + qemu_get_be32s(f, &s->currCPlusRxDesc); + qemu_get_be32s(f, &s->currCPlusTxDesc); + qemu_get_be32s(f, &s->RxRingAddrLO); + qemu_get_be32s(f, &s->RxRingAddrHI); + + for (i=0; i<EEPROM_9346_SIZE; ++i) + { + qemu_get_be16s(f, &s->eeprom.contents[i]); + } + qemu_get_be32s(f, &s->eeprom.mode); + qemu_get_be32s(f, &s->eeprom.tick); + qemu_get_8s(f, &s->eeprom.address); + qemu_get_be16s(f, &s->eeprom.input); + qemu_get_be16s(f, &s->eeprom.output); + + qemu_get_8s(f, &s->eeprom.eecs); + qemu_get_8s(f, &s->eeprom.eesk); + qemu_get_8s(f, &s->eeprom.eedi); + qemu_get_8s(f, &s->eeprom.eedo); + + return 0; +} + +/***********************************************************/ +/* PCI RTL8139 definitions */ + +typedef struct PCIRTL8139State { + PCIDevice dev; + RTL8139State rtl8139; +} PCIRTL8139State; + +static void rtl8139_mmio_map(PCIDevice *pci_dev, int region_num, + uint32_t addr, uint32_t size, int type) +{ + PCIRTL8139State *d = (PCIRTL8139State *)pci_dev; + RTL8139State *s = &d->rtl8139; + + cpu_register_physical_memory(addr + 0, 0x100, s->rtl8139_mmio_io_addr); +} + +static void rtl8139_ioport_map(PCIDevice *pci_dev, int region_num, + uint32_t addr, uint32_t size, int type) +{ + PCIRTL8139State *d = (PCIRTL8139State *)pci_dev; + RTL8139State *s = &d->rtl8139; + + register_ioport_write(addr, 0x100, 1, rtl8139_ioport_writeb, s); + register_ioport_read( addr, 0x100, 1, rtl8139_ioport_readb, s); + + register_ioport_write(addr, 0x100, 2, rtl8139_ioport_writew, s); + register_ioport_read( addr, 0x100, 2, rtl8139_ioport_readw, s); + + register_ioport_write(addr, 0x100, 4, rtl8139_ioport_writel, s); + register_ioport_read( addr, 0x100, 4, rtl8139_ioport_readl, s); +} + +static CPUReadMemoryFunc *rtl8139_mmio_read[3] = { + rtl8139_mmio_readb, + rtl8139_mmio_readw, + rtl8139_mmio_readl, +}; + +static CPUWriteMemoryFunc *rtl8139_mmio_write[3] = { + rtl8139_mmio_writeb, + rtl8139_mmio_writew, + rtl8139_mmio_writel, +}; + +void pci_rtl8139_init(PCIBus *bus, NICInfo *nd) +{ + PCIRTL8139State *d; + RTL8139State *s; + uint8_t *pci_conf; + + d = (PCIRTL8139State *)pci_register_device(bus, + "RTL8139", sizeof(PCIRTL8139State), + -1, + NULL, NULL); + pci_conf = d->dev.config; + pci_conf[0x00] = 0xec; /* Realtek 8139 */ + pci_conf[0x01] = 0x10; + pci_conf[0x02] = 0x39; + pci_conf[0x03] = 0x81; + pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */ + pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; >=0x20 is for 8139C+ */ + pci_conf[0x0a] = 0x00; /* ethernet network controller */ + pci_conf[0x0b] = 0x02; + pci_conf[0x0e] = 0x00; /* header_type */ + pci_conf[0x3d] = 1; /* interrupt pin 0 */ + pci_conf[0x34] = 0xdc; + + s = &d->rtl8139; + + /* I/O handler for memory-mapped I/O */ + s->rtl8139_mmio_io_addr = + cpu_register_io_memory(0, rtl8139_mmio_read, rtl8139_mmio_write, s); + + pci_register_io_region(&d->dev, 0, 0x100, + PCI_ADDRESS_SPACE_IO, rtl8139_ioport_map); + + pci_register_io_region(&d->dev, 1, 0x100, + PCI_ADDRESS_SPACE_MEM, rtl8139_mmio_map); + + s->irq = 16; /* PCI interrupt */ + s->pci_dev = (PCIDevice *)d; + memcpy(s->macaddr, nd->macaddr, 6); + rtl8139_reset(s); + s->vc = qemu_new_vlan_client(nd->vlan, rtl8139_receive, + rtl8139_can_receive, s); + + snprintf(s->vc->info_str, sizeof(s->vc->info_str), + "rtl8139 pci macaddr=%02x:%02x:%02x:%02x:%02x:%02x", + s->macaddr[0], + s->macaddr[1], + s->macaddr[2], + s->macaddr[3], + s->macaddr[4], + s->macaddr[5]); + + /* XXX: instance number ? */ + register_savevm("rtl8139", 0, 1, rtl8139_save, rtl8139_load, s); + register_savevm("rtl8139_pci", 0, 1, generic_pci_save, generic_pci_load, + &d->dev); +} |