diff options
Diffstat (limited to 'hw/char/mcf_uart.c')
-rw-r--r-- | hw/char/mcf_uart.c | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/hw/char/mcf_uart.c b/hw/char/mcf_uart.c new file mode 100644 index 0000000000..6724b1b718 --- /dev/null +++ b/hw/char/mcf_uart.c @@ -0,0 +1,307 @@ +/* + * ColdFire UART emulation. + * + * Copyright (c) 2007 CodeSourcery. + * + * This code is licensed under the GPL + */ +#include "hw/hw.h" +#include "hw/m68k/mcf.h" +#include "char/char.h" +#include "exec/address-spaces.h" + +typedef struct { + MemoryRegion iomem; + uint8_t mr[2]; + uint8_t sr; + uint8_t isr; + uint8_t imr; + uint8_t bg1; + uint8_t bg2; + uint8_t fifo[4]; + uint8_t tb; + int current_mr; + int fifo_len; + int tx_enabled; + int rx_enabled; + qemu_irq irq; + CharDriverState *chr; +} mcf_uart_state; + +/* UART Status Register bits. */ +#define MCF_UART_RxRDY 0x01 +#define MCF_UART_FFULL 0x02 +#define MCF_UART_TxRDY 0x04 +#define MCF_UART_TxEMP 0x08 +#define MCF_UART_OE 0x10 +#define MCF_UART_PE 0x20 +#define MCF_UART_FE 0x40 +#define MCF_UART_RB 0x80 + +/* Interrupt flags. */ +#define MCF_UART_TxINT 0x01 +#define MCF_UART_RxINT 0x02 +#define MCF_UART_DBINT 0x04 +#define MCF_UART_COSINT 0x80 + +/* UMR1 flags. */ +#define MCF_UART_BC0 0x01 +#define MCF_UART_BC1 0x02 +#define MCF_UART_PT 0x04 +#define MCF_UART_PM0 0x08 +#define MCF_UART_PM1 0x10 +#define MCF_UART_ERR 0x20 +#define MCF_UART_RxIRQ 0x40 +#define MCF_UART_RxRTS 0x80 + +static void mcf_uart_update(mcf_uart_state *s) +{ + s->isr &= ~(MCF_UART_TxINT | MCF_UART_RxINT); + if (s->sr & MCF_UART_TxRDY) + s->isr |= MCF_UART_TxINT; + if ((s->sr & ((s->mr[0] & MCF_UART_RxIRQ) + ? MCF_UART_FFULL : MCF_UART_RxRDY)) != 0) + s->isr |= MCF_UART_RxINT; + + qemu_set_irq(s->irq, (s->isr & s->imr) != 0); +} + +uint64_t mcf_uart_read(void *opaque, hwaddr addr, + unsigned size) +{ + mcf_uart_state *s = (mcf_uart_state *)opaque; + switch (addr & 0x3f) { + case 0x00: + return s->mr[s->current_mr]; + case 0x04: + return s->sr; + case 0x0c: + { + uint8_t val; + int i; + + if (s->fifo_len == 0) + return 0; + + val = s->fifo[0]; + s->fifo_len--; + for (i = 0; i < s->fifo_len; i++) + s->fifo[i] = s->fifo[i + 1]; + s->sr &= ~MCF_UART_FFULL; + if (s->fifo_len == 0) + s->sr &= ~MCF_UART_RxRDY; + mcf_uart_update(s); + qemu_chr_accept_input(s->chr); + return val; + } + case 0x10: + /* TODO: Implement IPCR. */ + return 0; + case 0x14: + return s->isr; + case 0x18: + return s->bg1; + case 0x1c: + return s->bg2; + default: + return 0; + } +} + +/* Update TxRDY flag and set data if present and enabled. */ +static void mcf_uart_do_tx(mcf_uart_state *s) +{ + if (s->tx_enabled && (s->sr & MCF_UART_TxEMP) == 0) { + if (s->chr) + qemu_chr_fe_write(s->chr, (unsigned char *)&s->tb, 1); + s->sr |= MCF_UART_TxEMP; + } + if (s->tx_enabled) { + s->sr |= MCF_UART_TxRDY; + } else { + s->sr &= ~MCF_UART_TxRDY; + } +} + +static void mcf_do_command(mcf_uart_state *s, uint8_t cmd) +{ + /* Misc command. */ + switch ((cmd >> 4) & 3) { + case 0: /* No-op. */ + break; + case 1: /* Reset mode register pointer. */ + s->current_mr = 0; + break; + case 2: /* Reset receiver. */ + s->rx_enabled = 0; + s->fifo_len = 0; + s->sr &= ~(MCF_UART_RxRDY | MCF_UART_FFULL); + break; + case 3: /* Reset transmitter. */ + s->tx_enabled = 0; + s->sr |= MCF_UART_TxEMP; + s->sr &= ~MCF_UART_TxRDY; + break; + case 4: /* Reset error status. */ + break; + case 5: /* Reset break-change interrupt. */ + s->isr &= ~MCF_UART_DBINT; + break; + case 6: /* Start break. */ + case 7: /* Stop break. */ + break; + } + + /* Transmitter command. */ + switch ((cmd >> 2) & 3) { + case 0: /* No-op. */ + break; + case 1: /* Enable. */ + s->tx_enabled = 1; + mcf_uart_do_tx(s); + break; + case 2: /* Disable. */ + s->tx_enabled = 0; + mcf_uart_do_tx(s); + break; + case 3: /* Reserved. */ + fprintf(stderr, "mcf_uart: Bad TX command\n"); + break; + } + + /* Receiver command. */ + switch (cmd & 3) { + case 0: /* No-op. */ + break; + case 1: /* Enable. */ + s->rx_enabled = 1; + break; + case 2: + s->rx_enabled = 0; + break; + case 3: /* Reserved. */ + fprintf(stderr, "mcf_uart: Bad RX command\n"); + break; + } +} + +void mcf_uart_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + mcf_uart_state *s = (mcf_uart_state *)opaque; + switch (addr & 0x3f) { + case 0x00: + s->mr[s->current_mr] = val; + s->current_mr = 1; + break; + case 0x04: + /* CSR is ignored. */ + break; + case 0x08: /* Command Register. */ + mcf_do_command(s, val); + break; + case 0x0c: /* Transmit Buffer. */ + s->sr &= ~MCF_UART_TxEMP; + s->tb = val; + mcf_uart_do_tx(s); + break; + case 0x10: + /* ACR is ignored. */ + break; + case 0x14: + s->imr = val; + break; + default: + break; + } + mcf_uart_update(s); +} + +static void mcf_uart_reset(mcf_uart_state *s) +{ + s->fifo_len = 0; + s->mr[0] = 0; + s->mr[1] = 0; + s->sr = MCF_UART_TxEMP; + s->tx_enabled = 0; + s->rx_enabled = 0; + s->isr = 0; + s->imr = 0; +} + +static void mcf_uart_push_byte(mcf_uart_state *s, uint8_t data) +{ + /* Break events overwrite the last byte if the fifo is full. */ + if (s->fifo_len == 4) + s->fifo_len--; + + s->fifo[s->fifo_len] = data; + s->fifo_len++; + s->sr |= MCF_UART_RxRDY; + if (s->fifo_len == 4) + s->sr |= MCF_UART_FFULL; + + mcf_uart_update(s); +} + +static void mcf_uart_event(void *opaque, int event) +{ + mcf_uart_state *s = (mcf_uart_state *)opaque; + + switch (event) { + case CHR_EVENT_BREAK: + s->isr |= MCF_UART_DBINT; + mcf_uart_push_byte(s, 0); + break; + default: + break; + } +} + +static int mcf_uart_can_receive(void *opaque) +{ + mcf_uart_state *s = (mcf_uart_state *)opaque; + + return s->rx_enabled && (s->sr & MCF_UART_FFULL) == 0; +} + +static void mcf_uart_receive(void *opaque, const uint8_t *buf, int size) +{ + mcf_uart_state *s = (mcf_uart_state *)opaque; + + mcf_uart_push_byte(s, buf[0]); +} + +void *mcf_uart_init(qemu_irq irq, CharDriverState *chr) +{ + mcf_uart_state *s; + + s = g_malloc0(sizeof(mcf_uart_state)); + s->chr = chr; + s->irq = irq; + if (chr) { + qemu_chr_fe_claim_no_fail(chr); + qemu_chr_add_handlers(chr, mcf_uart_can_receive, mcf_uart_receive, + mcf_uart_event, s); + } + mcf_uart_reset(s); + return s; +} + +static const MemoryRegionOps mcf_uart_ops = { + .read = mcf_uart_read, + .write = mcf_uart_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +void mcf_uart_mm_init(MemoryRegion *sysmem, + hwaddr base, + qemu_irq irq, + CharDriverState *chr) +{ + mcf_uart_state *s; + + s = mcf_uart_init(irq, chr); + memory_region_init_io(&s->iomem, &mcf_uart_ops, s, "uart", 0x40); + memory_region_add_subregion(sysmem, base, &s->iomem); +} |