From 6da127ad0918f93ea93678dad62ce15ffed18797 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Fri, 11 Jan 2008 10:09:43 +0100 Subject: blktrace: Add blktrace ioctls to SCSI generic devices Since the SCSI layer uses the request queues from the block layer, blktrace can also be used to trace the requests to all SCSI devices (like SCSI tape drives), not only disks. The only missing part is the ioctl interface to start and stop tracing. This patch adds the SETUP, START, STOP and TEARDOWN ioctls from blktrace to the sg device files. With this change, blktrace can be used for SCSI devices like for disks, e.g.: blktrace -d /dev/sg1 -o - | blkparse -i - Signed-off-by: Christof Schmitt Signed-off-by: Jens Axboe --- block/blktrace.c | 24 ++++++++++++++---------- block/compat_ioctl.c | 5 ++++- 2 files changed, 18 insertions(+), 11 deletions(-) (limited to 'block') diff --git a/block/blktrace.c b/block/blktrace.c index 9b4da4ae3c7d..568588cd16b2 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -235,7 +235,7 @@ static void blk_trace_cleanup(struct blk_trace *bt) kfree(bt); } -static int blk_trace_remove(struct request_queue *q) +int blk_trace_remove(struct request_queue *q) { struct blk_trace *bt; @@ -249,6 +249,7 @@ static int blk_trace_remove(struct request_queue *q) return 0; } +EXPORT_SYMBOL_GPL(blk_trace_remove); static int blk_dropped_open(struct inode *inode, struct file *filp) { @@ -316,18 +317,17 @@ static struct rchan_callbacks blk_relay_callbacks = { /* * Setup everything required to start tracing */ -int do_blk_trace_setup(struct request_queue *q, struct block_device *bdev, +int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, struct blk_user_trace_setup *buts) { struct blk_trace *old_bt, *bt = NULL; struct dentry *dir = NULL; - char b[BDEVNAME_SIZE]; int ret, i; if (!buts->buf_size || !buts->buf_nr) return -EINVAL; - strcpy(buts->name, bdevname(bdev, b)); + strcpy(buts->name, name); /* * some device names have larger paths - convert the slashes @@ -352,7 +352,7 @@ int do_blk_trace_setup(struct request_queue *q, struct block_device *bdev, goto err; bt->dir = dir; - bt->dev = bdev->bd_dev; + bt->dev = dev; atomic_set(&bt->dropped, 0); ret = -EIO; @@ -399,8 +399,8 @@ err: return ret; } -static int blk_trace_setup(struct request_queue *q, struct block_device *bdev, - char __user *arg) +int blk_trace_setup(struct request_queue *q, char *name, dev_t dev, + char __user *arg) { struct blk_user_trace_setup buts; int ret; @@ -409,7 +409,7 @@ static int blk_trace_setup(struct request_queue *q, struct block_device *bdev, if (ret) return -EFAULT; - ret = do_blk_trace_setup(q, bdev, &buts); + ret = do_blk_trace_setup(q, name, dev, &buts); if (ret) return ret; @@ -418,8 +418,9 @@ static int blk_trace_setup(struct request_queue *q, struct block_device *bdev, return 0; } +EXPORT_SYMBOL_GPL(blk_trace_setup); -static int blk_trace_startstop(struct request_queue *q, int start) +int blk_trace_startstop(struct request_queue *q, int start) { struct blk_trace *bt; int ret; @@ -452,6 +453,7 @@ static int blk_trace_startstop(struct request_queue *q, int start) return ret; } +EXPORT_SYMBOL_GPL(blk_trace_startstop); /** * blk_trace_ioctl: - handle the ioctls associated with tracing @@ -464,6 +466,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg) { struct request_queue *q; int ret, start = 0; + char b[BDEVNAME_SIZE]; q = bdev_get_queue(bdev); if (!q) @@ -473,7 +476,8 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg) switch (cmd) { case BLKTRACESETUP: - ret = blk_trace_setup(q, bdev, arg); + strcpy(b, bdevname(bdev, b)); + ret = blk_trace_setup(q, b, bdev->bd_dev, arg); break; case BLKTRACESTART: start = 1; diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c index cae0a852619e..b73373216b0e 100644 --- a/block/compat_ioctl.c +++ b/block/compat_ioctl.c @@ -545,6 +545,7 @@ static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg) struct blk_user_trace_setup buts; struct compat_blk_user_trace_setup cbuts; struct request_queue *q; + char b[BDEVNAME_SIZE]; int ret; q = bdev_get_queue(bdev); @@ -554,6 +555,8 @@ static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg) if (copy_from_user(&cbuts, arg, sizeof(cbuts))) return -EFAULT; + strcpy(b, bdevname(bdev, b)); + buts = (struct blk_user_trace_setup) { .act_mask = cbuts.act_mask, .buf_size = cbuts.buf_size, @@ -565,7 +568,7 @@ static int compat_blk_trace_setup(struct block_device *bdev, char __user *arg) memcpy(&buts.name, &cbuts.name, 32); mutex_lock(&bdev->bd_mutex); - ret = do_blk_trace_setup(q, bdev, &buts); + ret = do_blk_trace_setup(q, b, bdev->bd_dev, &buts); mutex_unlock(&bdev->bd_mutex); if (ret) return ret; -- cgit v1.2.3 From fa0ccd837e3dddb44c7db2f128a8bb7e4eabc21a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 10 Jan 2008 11:30:36 -0600 Subject: block: implement drain buffers These DMA drain buffer implementations in drivers are pretty horrible to do in terms of manipulating the scatterlist. Plus they're being done at least in drivers/ide and drivers/ata, so we now have code duplication. The one use case for this, as I understand it is AHCI controllers doing PIO mode to mmc devices but translating this to DMA at the controller level. So, what about adding a callback to the block layer that permits the adding of the drain buffer for the problem devices. The idea is that you'd do this in slave_configure after you find one of these devices. The beauty of doing it in the block layer is that it quietly adds the drain buffer to the end of the sg list, so it automatically gets mapped (and unmapped) without anything unusual having to be done to the scatterlist in driver/scsi or drivers/ata and without any alteration to the transfer length. Signed-off-by: James Bottomley Signed-off-by: Jens Axboe --- block/elevator.c | 26 +++++++++++++++++++++++++- block/ll_rw_blk.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/blkdev.h | 4 ++++ 3 files changed, 78 insertions(+), 1 deletion(-) (limited to 'block') diff --git a/block/elevator.c b/block/elevator.c index f9736fbdab03..8cd5775acd7a 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -741,7 +741,21 @@ struct request *elv_next_request(struct request_queue *q) q->boundary_rq = NULL; } - if ((rq->cmd_flags & REQ_DONTPREP) || !q->prep_rq_fn) + if (rq->cmd_flags & REQ_DONTPREP) + break; + + if (q->dma_drain_size && rq->data_len) { + /* + * make sure space for the drain appears we + * know we can do this because max_hw_segments + * has been adjusted to be one fewer than the + * device can handle + */ + rq->nr_phys_segments++; + rq->nr_hw_segments++; + } + + if (!q->prep_rq_fn) break; ret = q->prep_rq_fn(q, rq); @@ -754,6 +768,16 @@ struct request *elv_next_request(struct request_queue *q) * avoid resource deadlock. REQ_STARTED will * prevent other fs requests from passing this one. */ + if (q->dma_drain_size && rq->data_len && + !(rq->cmd_flags & REQ_DONTPREP)) { + /* + * remove the space for the drain we added + * so that we don't add it again + */ + --rq->nr_phys_segments; + --rq->nr_hw_segments; + } + rq = NULL; break; } else if (ret == BLKPREP_KILL) { diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 3d0422f48453..768987dc2697 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -725,6 +725,45 @@ void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b) EXPORT_SYMBOL(blk_queue_stack_limits); +/** + * blk_queue_dma_drain - Set up a drain buffer for excess dma. + * + * @q: the request queue for the device + * @buf: physically contiguous buffer + * @size: size of the buffer in bytes + * + * Some devices have excess DMA problems and can't simply discard (or + * zero fill) the unwanted piece of the transfer. They have to have a + * real area of memory to transfer it into. The use case for this is + * ATAPI devices in DMA mode. If the packet command causes a transfer + * bigger than the transfer size some HBAs will lock up if there + * aren't DMA elements to contain the excess transfer. What this API + * does is adjust the queue so that the buf is always appended + * silently to the scatterlist. + * + * Note: This routine adjusts max_hw_segments to make room for + * appending the drain buffer. If you call + * blk_queue_max_hw_segments() or blk_queue_max_phys_segments() after + * calling this routine, you must set the limit to one fewer than your + * device can support otherwise there won't be room for the drain + * buffer. + */ +int blk_queue_dma_drain(struct request_queue *q, void *buf, + unsigned int size) +{ + if (q->max_hw_segments < 2 || q->max_phys_segments < 2) + return -EINVAL; + /* make room for appending the drain */ + --q->max_hw_segments; + --q->max_phys_segments; + q->dma_drain_buffer = buf; + q->dma_drain_size = size; + + return 0; +} + +EXPORT_SYMBOL_GPL(blk_queue_dma_drain); + /** * blk_queue_segment_boundary - set boundary rules for segment merging * @q: the request queue for the device @@ -1379,6 +1418,16 @@ new_segment: bvprv = bvec; } /* segments in rq */ + if (q->dma_drain_size) { + sg->page_link &= ~0x02; + sg = sg_next(sg); + sg_set_page(sg, virt_to_page(q->dma_drain_buffer), + q->dma_drain_size, + ((unsigned long)q->dma_drain_buffer) & + (PAGE_SIZE - 1)); + nsegs++; + } + if (sg) sg_mark_end(sg); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c7a3ab575c24..e542c8fd9215 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -429,6 +429,8 @@ struct request_queue unsigned int max_segment_size; unsigned long seg_boundary_mask; + void *dma_drain_buffer; + unsigned int dma_drain_size; unsigned int dma_alignment; struct blk_queue_tag *queue_tags; @@ -760,6 +762,8 @@ extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); extern void blk_queue_hardsect_size(struct request_queue *, unsigned short); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); +extern int blk_queue_dma_drain(struct request_queue *q, void *buf, + unsigned int size); extern void blk_queue_segment_boundary(struct request_queue *, unsigned long); extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn); extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *); -- cgit v1.2.3