From d9fa04725f27ffe5c4964eb53fa8903ecbf56008 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 23 Sep 2016 22:30:54 +0200 Subject: ARM: pxa: em-x270: use the new pxa_camera platform_data pxa_camera has transitioned from a soc_camera driver to a standalone v4l2 driver. Amend the device declaration accordingly. Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/em-x270.c | 89 +++++++++++++++------------------------------ 1 file changed, 29 insertions(+), 60 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 03354c21e1f2..811a7317f3ea 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -34,8 +35,6 @@ #include #include -#include - #include #include @@ -958,8 +957,6 @@ static inline void em_x270_init_gpio_keys(void) {} /* Quick Capture Interface and sensor setup */ #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE) -static struct regulator *em_x270_camera_ldo; - static int em_x270_sensor_init(void) { int ret; @@ -969,81 +966,53 @@ static int em_x270_sensor_init(void) return ret; gpio_direction_output(cam_reset, 0); - - em_x270_camera_ldo = regulator_get(NULL, "vcc cam"); - if (em_x270_camera_ldo == NULL) { - gpio_free(cam_reset); - return -ENODEV; - } - - ret = regulator_enable(em_x270_camera_ldo); - if (ret) { - regulator_put(em_x270_camera_ldo); - gpio_free(cam_reset); - return ret; - } - gpio_set_value(cam_reset, 1); return 0; } -struct pxacamera_platform_data em_x270_camera_platform_data = { - .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | - PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, - .mclk_10khz = 2600, +static struct regulator_consumer_supply camera_dummy_supplies[] = { + REGULATOR_SUPPLY("vdd", "0-005d"), }; -static int em_x270_sensor_power(struct device *dev, int on) -{ - int ret; - int is_on = regulator_is_enabled(em_x270_camera_ldo); - - if (on == is_on) - return 0; - - gpio_set_value(cam_reset, !on); - - if (on) - ret = regulator_enable(em_x270_camera_ldo); - else - ret = regulator_disable(em_x270_camera_ldo); - - if (ret) - return ret; - - gpio_set_value(cam_reset, on); - - return 0; -} - -static struct i2c_board_info em_x270_i2c_cam_info[] = { - { - I2C_BOARD_INFO("mt9m111", 0x48), +static struct regulator_init_data camera_dummy_initdata = { + .consumer_supplies = camera_dummy_supplies, + .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, }; -static struct soc_camera_link iclink = { - .bus_id = 0, - .power = em_x270_sensor_power, - .board_info = &em_x270_i2c_cam_info[0], - .i2c_adapter_id = 0, +static struct fixed_voltage_config camera_dummy_config = { + .supply_name = "camera_vdd", + .input_supply = "vcc cam", + .microvolts = 2800000, + .gpio = -1, + .enable_high = 0, + .init_data = &camera_dummy_initdata, }; -static struct platform_device em_x270_camera = { - .name = "soc-camera-pdrv", - .id = -1, +static struct platform_device camera_supply_dummy_device = { + .name = "reg-fixed-voltage", + .id = 1, .dev = { - .platform_data = &iclink, + .platform_data = &camera_dummy_config, }, }; +struct pxacamera_platform_data em_x270_camera_platform_data = { + .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | + PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN, + .mclk_10khz = 2600, + .sensor_i2c_adapter_id = 0, + .sensor_i2c_address = 0x5d, +}; + static void __init em_x270_init_camera(void) { - if (em_x270_sensor_init() == 0) { + if (em_x270_sensor_init() == 0) pxa_set_camera_info(&em_x270_camera_platform_data); - platform_device_register(&em_x270_camera); - } + platform_device_register(&camera_supply_dummy_device); } #else static inline void em_x270_init_camera(void) {} -- cgit v1.2.3