From 6f0b2c696ca340cc2da381fe693fda3f8fdb2149 Mon Sep 17 00:00:00 2001 From: Yadwinder Singh Brar Date: Mon, 11 Jun 2012 17:41:08 +0530 Subject: regulator: Add ramp_delay configuration to constraints For some hardwares ramp_delay for BUCKs is a configurable parameter which can be configured through DT or board file.This patch adds ramp_delay to regulator constraints and allow user to configure it for regulators which supports this feature, through DT or board file. It will provide two ways of setting the ramp_delay for a regulator: First, by setting it as constraints in board file(for configurable regulators) and set_machine_constraints() will take care of setting it on hardware by calling(the provided) .set_ramp_delay() operation(callback). Second, by setting it as data in regulator_desc(as fixed/default ramp_delay rate) for a regulator in driver. regulator_set_voltage_time_sel() will give preference to constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly users should also take care accordingly while refering ramp_delay rate(in case of implementing their private .set_voltage_time_sel() callbacks for different regulators). [Rewrote subject for 80 columns -- broonie] Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 5b7a408acdaa..d0a7b1296a36 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -10,6 +10,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node +- regulator-ramp-delay: ramp delay for regulator(in mV/uS) Example: -- cgit v1.2.3 From ea38d13fd1666bc030cb1c0feec5b0da2f89f9b2 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 18 Jun 2012 14:03:16 +0800 Subject: regulator: core: Change the unit of ramp_delay from mV/uS to uV/uS This change makes it possible to set ramp_delay with 0.xxx mV/uS without truncation issue. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 2 +- drivers/regulator/core.c | 4 ++-- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index d0a7b1296a36..bec5d5747411 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -10,7 +10,7 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node -- regulator-ramp-delay: ramp delay for regulator(in mV/uS) +- regulator-ramp-delay: ramp delay for regulator(in uV/uS) Example: diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 73a3d874ca6e..ce0a3462e0de 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2319,11 +2319,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, if (rdev->desc->uV_step) { return DIV_ROUND_UP(rdev->desc->uV_step * abs(new_selector - old_selector), - ramp_delay * 1000); + ramp_delay); } else if (rdev->desc->volt_table) { return DIV_ROUND_UP(abs(rdev->desc->volt_table[new_selector] - rdev->desc->volt_table[old_selector]), - ramp_delay * 1000); + ramp_delay); } else { rdev_warn(rdev, "Unsupported voltage mapping settings\n"); } diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ddc155d262da..84f999ed394b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -173,7 +173,7 @@ enum regulator_type { * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 5f37ad3cc172..40dd0a394cfa 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,7 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. - * @ramp_delay: Time to settle down after voltage change (unit: mV/us) + * @ramp_delay: Time to settle down after voltage change (unit: uV/us) */ struct regulation_constraints { -- cgit v1.2.3 From 0e8e5c34cf1a8beaaf0a6a05c053592693bf8cb4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 4 Jun 2012 17:23:13 +0100 Subject: regulator: twl: Remove references to 32kHz clock from DT bindings Due to the lack of a generic clock API we'd had the 32kHz clock in the regulator driver but this is definitely a Linux-specific thing and now we have a clock API hopefully the code can be moved elsewhere. Try to avoid getting DTs deployed relying on the 32kHz clock by removing it from the bindings, grep seems to tell me it's not currently used anyway. Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/twl-regulator.txt | 1 - drivers/regulator/twl-regulator.c | 2 -- 2 files changed, 3 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt index 0c3395d55ac1..658749b90b97 100644 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -15,7 +15,6 @@ For twl6030 regulators/LDOs - "ti,twl6030-vusb" for VUSB LDO - "ti,twl6030-v1v8" for V1V8 LDO - "ti,twl6030-v2v1" for V2V1 LDO - - "ti,twl6030-clk32kg" for CLK32KG RESOURCE - "ti,twl6030-vdd1" for VDD1 SMPS - "ti,twl6030-vdd2" for VDD2 SMPS - "ti,twl6030-vdd3" for VDD3 SMPS diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index a1d07e517db3..ca308cb8e676 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -1106,7 +1106,6 @@ static u8 twl_get_smps_mult(void) #define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label) #define TWL6025_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6025, label) #define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label) -#define TWLRES_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLRES, label) #define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label) static const struct of_device_id twl_of_match[] __devinitconst = { @@ -1154,7 +1153,6 @@ static const struct of_device_id twl_of_match[] __devinitconst = { TWLFIXED_OF_MATCH("ti,twl6030-vusb", VUSB), TWLFIXED_OF_MATCH("ti,twl6030-v1v8", V1V8), TWLFIXED_OF_MATCH("ti,twl6030-v2v1", V2V1), - TWLRES_OF_MATCH("ti,twl6030-clk32kg", CLK32KG), TWLSMPS_OF_MATCH("ti,twl6025-smps3", SMPS3), TWLSMPS_OF_MATCH("ti,twl6025-smps4", SMPS4), TWLSMPS_OF_MATCH("ti,twl6025-vio", VIO), -- cgit v1.2.3 From 8c5e461df77c14254a408e792bb32ddf08213726 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 5 Jul 2012 12:53:04 +0530 Subject: regulator: dt: add policy to have property "regulator-compatible" Add the policy for regulator DT such that if device have multiple regulator and its binding contains a child node that describes each regulator then each regulator child node must have the property "regulator-compatible" which matches with regulator name of their hardware counterparts. Modify the DT documentation of regulator devices to reflect this policy. Signed-off-by: Laxman Dewangan Acked-by: Stephen Warren Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/mfd/tps65910.txt | 54 ++++++++++++++----- .../devicetree/bindings/regulator/regulator.txt | 4 ++ .../devicetree/bindings/regulator/tps6586x.txt | 60 ++++++++++++++++------ 3 files changed, 90 insertions(+), 28 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 645f5eaadb3f..b51d2066599c 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -17,8 +17,9 @@ Required properties: device need to be present. The definition for each of these nodes is defined using the standard binding for regulators found at Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. - The valid names for regulators are: + The valid regulator-compatible values are: tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, vaux2, vaux33, vmmc tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, @@ -57,73 +58,100 @@ Example: ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; regulators { - vdd1_reg: vdd1 { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + regulator-compatible = "vdd1"; + reg = <0>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <0>; }; - vdd2_reg: vdd2 { + vdd2_reg: regulator@1 { + regulator-compatible = "vdd2"; + reg = <1>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <4>; }; - vddctrl_reg: vddctrl { + vddctrl_reg: regulator@2 { + regulator-compatible = "vddctrl"; + reg = <2>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <0>; }; - vio_reg: vio { + vio_reg: regulator@3 { + regulator-compatible = "vio"; + reg = <3>; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <1>; }; - ldo1_reg: ldo1 { + ldo1_reg: regulator@4 { + regulator-compatible = "ldo1"; + reg = <4>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo2_reg: ldo2 { + ldo2_reg: regulator@5 { + regulator-compatible = "ldo2"; + reg = <5>; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; ti,regulator-ext-sleep-control = <0>; }; - ldo3_reg: ldo3 { + ldo3_reg: regulator@6 { + regulator-compatible = "ldo3"; + reg = <6>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo4_reg: ldo4 { + ldo4_reg: regulator@7 { + regulator-compatible = "ldo4"; + reg = <7>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-always-on; ti,regulator-ext-sleep-control = <0>; }; - ldo5_reg: ldo5 { + ldo5_reg: regulator@8 { + regulator-compatible = "ldo5"; + reg = <8>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo6_reg: ldo6 { + ldo6_reg: regulator@9 { + regulator-compatible = "ldo6"; + reg = <9>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; ti,regulator-ext-sleep-control = <0>; }; - ldo7_reg: ldo7 { + ldo7_reg: regulator@10 { + regulator-compatible = "ldo7"; + reg = <10>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <1>; }; - ldo8_reg: ldo8 { + ldo8_reg: regulator@11 { + regulator-compatible = "ldo8"; + reg = <11>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-always-on; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index bec5d5747411..66ece3f87bbc 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,6 +11,10 @@ Optional properties: - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) +- regulator-compatible: If a regulator chip contains multiple + regulators, and if the chip's binding contains a child node that + describes each regulator, then this property indicates which regulator + this child node is intended to configure. Example: diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index 0fcabaa3baa3..ab17ef690286 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -6,8 +6,9 @@ Required properties: - interrupts: the interrupt outputs of the controller - #gpio-cells: number of cells to describe a GPIO - gpio-controller: mark the device as a GPIO controller -- regulators: list of regulators provided by this controller, must be named - after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc +- regulators: list of regulators provided by this controller, must have + property "regulator-compatible" to match their hardware counterparts: + sm[0-2], ldo[0-9] and ldo_rtc Each regulator is defined using the standard binding for regulators. @@ -22,74 +23,103 @@ Example: gpio-controller; regulators { - sm0_reg: sm0 { + #address-cells = <1>; + #size-cells = <0>; + + sm0_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sm0"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm1_reg: sm1 { + sm1_reg: regulator@1 { + reg = <1>; + regulator-compatible = "sm1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm2_reg: sm2 { + sm2_reg: regulator@2 { + reg = <2>; + regulator-compatible = "sm2"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; regulator-boot-on; regulator-always-on; }; - ldo0_reg: ldo0 { + ldo0_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo0"; regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: ldo1 { + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: ldo2 { + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: ldo3 { + ldo3_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo3"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: ldo4 { + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: ldo5 { + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: ldo6 { + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: ldo7 { + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: ldo8 { + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: ldo9 { + ldo9_reg: regulator@12 { + reg = <12>; + regulator-compatible = "ldo9"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; -- cgit v1.2.3 From 6be5bfc3bf0d31a70745a52e69f7f46de974193f Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 5 Jul 2012 18:12:01 +0530 Subject: regulator: fixed: dt: support for input supply Add support for input supply in DT parsing of node. The input supply will be provided by the property "vin-supply" in the regulator node. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/fixed-regulator.txt | 2 ++ drivers/regulator/fixed.c | 19 ++++++++++++++++++- include/linux/regulator/fixed.h | 2 ++ 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 2f5b6b1ba15f..4fae41d54798 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -10,6 +10,7 @@ Optional properties: If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. +-vin-supply: Input supply name. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -29,4 +30,5 @@ Example: enable-active-high; regulator-boot-on; gpio-open-drain; + vin-supply = <&parent_reg>; }; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 1a0b17e8d8a9..185468c4d38f 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -102,6 +102,9 @@ of_get_fixed_voltage_config(struct device *dev) if (of_find_property(np, "gpio-open-drain", NULL)) config->gpio_is_open_drain = true; + if (of_find_property(np, "vin-supply", NULL)) + config->input_supply = "vin"; + return config; } @@ -169,6 +172,17 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev) drvdata->desc.enable_time = config->startup_delay; + if (config->input_supply) { + drvdata->desc.supply_name = kstrdup(config->input_supply, + GFP_KERNEL); + if (!drvdata->desc.supply_name) { + dev_err(&pdev->dev, + "Failed to allocate input supply\n"); + ret = -ENOMEM; + goto err_name; + } + } + if (config->microvolts) drvdata->desc.n_voltages = 1; @@ -202,7 +216,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev) if (IS_ERR(drvdata->dev)) { ret = PTR_ERR(drvdata->dev); dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); - goto err_name; + goto err_input; } platform_set_drvdata(pdev, drvdata); @@ -212,6 +226,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev) return 0; +err_input: + kfree(drvdata->desc.supply_name); err_name: kfree(drvdata->desc.name); err: @@ -223,6 +239,7 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev) struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); regulator_unregister(drvdata->dev); + kfree(drvdata->desc.supply_name); kfree(drvdata->desc.name); return 0; diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index f83f7440b488..d6c24c53adf4 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -22,6 +22,7 @@ struct regulator_init_data; /** * struct fixed_voltage_config - fixed_voltage_config structure * @supply_name: Name of the regulator supply + * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used @@ -46,6 +47,7 @@ struct regulator_init_data; */ struct fixed_voltage_config { const char *supply_name; + const char *input_supply; int microvolts; int gpio; unsigned startup_delay; -- cgit v1.2.3 From 19228a6a59250d414824ae07e06ad057a404ea3e Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 6 Jul 2012 14:13:12 +0530 Subject: regulator: tps65910: add support for input supply There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan Acked-by: Stephen Warren Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/mfd/tps65910.txt | 25 +++++++++++++++ drivers/regulator/tps65910-regulator.c | 36 ++++++++++++++++++++++ include/linux/mfd/tps65910.h | 2 ++ 3 files changed, 63 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index b51d2066599c..31be5a3d9f76 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -32,6 +32,28 @@ Optional properties: comparator. (see VMBCH_VSEL in TPS65910 datasheet) - ti,en-gpio-sleep: enable sleep control for gpios There should be 9 entries here, one for each gpio. +- xxx-supply: Input voltage supply regulator. + Missing of these properties will be assume as there is no supply regulator + for that input pins and always powered on. + The valid input supply properties are: + tps65910: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: VAUX33 and VMMC input. + vcc4-supply: VAUX1 and VAUX2 input. + vcc5-supply: VPLL and VDAC input. + vcc6-supply: VDIG1 and VDIG2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. + tps65911: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: LDO6, LDO7 and LDO8 input. + vcc4-supply: LDO5 input. + vcc5-supply: LDO3 and LDO4 input. + vcc6-supply: LDO1 and LDO2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep @@ -57,6 +79,9 @@ Example: ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + vcc7-supply = <®_parent>; + vcc1-supply = <®_parent>; + regulators { #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index a534e0872006..e319d963fee6 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -85,6 +85,7 @@ static const unsigned int VMMC_VSEL_table[] = { struct tps_info { const char *name; + const char *vin_name; u8 n_voltages; const unsigned int *voltage_table; int enable_time_us; @@ -93,20 +94,24 @@ struct tps_info { static struct tps_info tps65910_regs[] = { { .name = "vrtc", + .vin_name = "vcc7", .enable_time_us = 2200, }, { .name = "vio", + .vin_name = "vccio", .n_voltages = ARRAY_SIZE(VIO_VSEL_table), .voltage_table = VIO_VSEL_table, .enable_time_us = 350, }, { .name = "vdd1", + .vin_name = "vcc1", .enable_time_us = 350, }, { .name = "vdd2", + .vin_name = "vcc2", .enable_time_us = 350, }, { @@ -117,48 +122,56 @@ static struct tps_info tps65910_regs[] = { }, { .name = "vdig1", + .vin_name = "vcc6", .n_voltages = ARRAY_SIZE(VDIG1_VSEL_table), .voltage_table = VDIG1_VSEL_table, .enable_time_us = 100, }, { .name = "vdig2", + .vin_name = "vcc6", .n_voltages = ARRAY_SIZE(VDIG2_VSEL_table), .voltage_table = VDIG2_VSEL_table, .enable_time_us = 100, }, { .name = "vpll", + .vin_name = "vcc5", .n_voltages = ARRAY_SIZE(VPLL_VSEL_table), .voltage_table = VPLL_VSEL_table, .enable_time_us = 100, }, { .name = "vdac", + .vin_name = "vcc5", .n_voltages = ARRAY_SIZE(VDAC_VSEL_table), .voltage_table = VDAC_VSEL_table, .enable_time_us = 100, }, { .name = "vaux1", + .vin_name = "vcc4", .n_voltages = ARRAY_SIZE(VAUX1_VSEL_table), .voltage_table = VAUX1_VSEL_table, .enable_time_us = 100, }, { .name = "vaux2", + .vin_name = "vcc4", .n_voltages = ARRAY_SIZE(VAUX2_VSEL_table), .voltage_table = VAUX2_VSEL_table, .enable_time_us = 100, }, { .name = "vaux33", + .vin_name = "vcc3", .n_voltages = ARRAY_SIZE(VAUX33_VSEL_table), .voltage_table = VAUX33_VSEL_table, .enable_time_us = 100, }, { .name = "vmmc", + .vin_name = "vcc3", .n_voltages = ARRAY_SIZE(VMMC_VSEL_table), .voltage_table = VMMC_VSEL_table, .enable_time_us = 100, @@ -168,21 +181,25 @@ static struct tps_info tps65910_regs[] = { static struct tps_info tps65911_regs[] = { { .name = "vrtc", + .vin_name = "vcc7", .enable_time_us = 2200, }, { .name = "vio", + .vin_name = "vccio", .n_voltages = ARRAY_SIZE(VIO_VSEL_table), .voltage_table = VIO_VSEL_table, .enable_time_us = 350, }, { .name = "vdd1", + .vin_name = "vcc1", .n_voltages = 73, .enable_time_us = 350, }, { .name = "vdd2", + .vin_name = "vcc2", .n_voltages = 73, .enable_time_us = 350, }, @@ -193,41 +210,49 @@ static struct tps_info tps65911_regs[] = { }, { .name = "ldo1", + .vin_name = "vcc6", .n_voltages = 47, .enable_time_us = 420, }, { .name = "ldo2", + .vin_name = "vcc6", .n_voltages = 47, .enable_time_us = 420, }, { .name = "ldo3", + .vin_name = "vcc5", .n_voltages = 24, .enable_time_us = 230, }, { .name = "ldo4", + .vin_name = "vcc5", .n_voltages = 47, .enable_time_us = 230, }, { .name = "ldo5", + .vin_name = "vcc4", .n_voltages = 24, .enable_time_us = 230, }, { .name = "ldo6", + .vin_name = "vcc3", .n_voltages = 24, .enable_time_us = 230, }, { .name = "ldo7", + .vin_name = "vcc3", .n_voltages = 24, .enable_time_us = 230, }, { .name = "ldo8", + .vin_name = "vcc3", .n_voltages = 24, .enable_time_us = 230, }, @@ -1013,6 +1038,9 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( *tps65910_reg_matches = matches; for (idx = 0; idx < count; idx++) { + struct tps_info *info = matches[idx].driver_data; + char in_supply[32]; /* 32 is max size of property name */ + if (!matches[idx].init_data || !matches[idx].of_node) continue; @@ -1023,6 +1051,13 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( "ti,regulator-ext-sleep-control", &prop); if (!ret) pmic_plat_data->regulator_ext_sleep_control[idx] = prop; + + if (info->vin_name) { + snprintf(in_supply, 32, "%s-supply", info->vin_name); + if (of_find_property(np, in_supply, 0)) + pmic_plat_data->input_supply[idx] = + info->vin_name; + } } return pmic_plat_data; @@ -1126,6 +1161,7 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->info[i] = info; pmic->desc[i].name = info->name; + pmic->desc[i].supply_name = pmic_plat_data->input_supply[i]; pmic->desc[i].id = i; pmic->desc[i].n_voltages = info->n_voltages; pmic->desc[i].enable_time = info->enable_time_us; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index dd8dc0a6c462..c5f806011b32 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -799,6 +799,7 @@ struct tps65910_sleep_keepon_data { /** * struct tps65910_board * Board platform data may be used to initialize regulators. + * @input_supply: Name of input supply regulator. */ struct tps65910_board { @@ -811,6 +812,7 @@ struct tps65910_board { struct tps65910_sleep_keepon_data *slp_keepon; bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; + const char *input_supply[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; -- cgit v1.2.3 From a7f1b63eb85606ad77a559b95c703b99e1205aa4 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 10 Jul 2012 16:39:42 +0530 Subject: regulator: tps65217: Add device tree support This commit adds device tree support for tps65217 pmic. And usage details are added to device tree documentation. Driver is tested by using kernel module with regulator set and get APIs. Signed-off-by: AnilKumar Ch Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/tps65217.txt | 91 ++++++++++++++++++++++ drivers/mfd/tps65217.c | 67 +++++++++++++++- drivers/regulator/tps65217-regulator.c | 1 + include/linux/mfd/tps65217.h | 3 +- 4 files changed, 159 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/tps65217.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt new file mode 100644 index 000000000000..0487e9675ba0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -0,0 +1,91 @@ +TPS65217 family of regulators + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-3] and ldo[1-4] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + + The valid names for regulators are: + tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index db194e433c08..61c097a98f5d 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -132,6 +133,61 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65217_clear_bits); +#ifdef CONFIG_OF +static struct of_regulator_match reg_matches[] = { + { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, + { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, + { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, + { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, + { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, + { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, + { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, +}; + +static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) +{ + struct device_node *node = client->dev.of_node; + struct tps65217_board *pdata; + struct device_node *regs; + int count = ARRAY_SIZE(reg_matches); + int ret, i; + + regs = of_find_node_by_name(node, "regulators"); + if (!regs) + return NULL; + + ret = of_regulator_match(&client->dev, regs, reg_matches, count); + of_node_put(regs); + if ((ret < 0) || (ret > count)) + return NULL; + + count = ret; + pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + for (i = 0; i < count; i++) { + if (!reg_matches[i].init_data || !reg_matches[i].of_node) + continue; + + pdata->tps65217_init_data[i] = reg_matches[i].init_data; + pdata->of_node[i] = reg_matches[i].of_node; + } + + return pdata; +} + +static struct of_device_id tps65217_of_match[] = { + { .compatible = "ti,tps65217", }, + { }, +}; +#else +static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) +{ + return NULL; +} +#endif + static struct regmap_config tps65217_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -141,10 +197,14 @@ static int __devinit tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { struct tps65217 *tps; + struct regulator_init_data *reg_data; struct tps65217_board *pdata = client->dev.platform_data; int i, ret; unsigned int version; + if (!pdata && client->dev.of_node) + pdata = tps65217_parse_dt(client); + tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; @@ -182,8 +242,9 @@ static int __devinit tps65217_probe(struct i2c_client *client, } pdev->dev.parent = tps->dev; - platform_device_add_data(pdev, &pdata->tps65217_init_data[i], - sizeof(pdata->tps65217_init_data[i])); + pdev->dev.of_node = pdata->of_node[i]; + reg_data = pdata->tps65217_init_data[i]; + platform_device_add_data(pdev, reg_data, sizeof(*reg_data)); tps->regulator_pdev[i] = pdev; platform_device_add(pdev); @@ -212,6 +273,8 @@ MODULE_DEVICE_TABLE(i2c, tps65217_id_table); static struct i2c_driver tps65217_driver = { .driver = { .name = "tps65217", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tps65217_of_match), }, .id_table = tps65217_id_table, .probe = tps65217_probe, diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index f7d0495b003e..6caa222af77a 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -293,6 +293,7 @@ static int __devinit tps65217_regulator_probe(struct platform_device *pdev) tps->info[pdev->id] = info; config.dev = &pdev->dev; + config.of_node = pdev->dev.of_node; config.init_data = pdev->dev.platform_data; config.driver_data = tps; diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 3a80da103f3f..12c06870829a 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -217,7 +217,8 @@ enum tps65217_regulator_id { * Board data may be used to initialize regulator. */ struct tps65217_board { - struct regulator_init_data *tps65217_init_data; + struct regulator_init_data *tps65217_init_data[TPS65217_NUM_REGULATOR]; + struct device_node *of_node[TPS65217_NUM_REGULATOR]; }; /** -- cgit v1.2.3 From 7c7fac30581b2fe2e0783d9b6f53ca333cc2296c Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Fri, 13 Jul 2012 19:20:32 +0530 Subject: regulator: tps6586x: add support for input supply There is multiple voltage input pins on device which takes the voltage input for different voltage regulator. Support to configure the voltage input supplied by different regulator for each regulators. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/tps6586x.txt | 17 ++++++++ drivers/regulator/tps6586x-regulator.c | 47 ++++++++++++---------- 2 files changed, 42 insertions(+), 22 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index ab17ef690286..d156e1b5db12 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -9,6 +9,14 @@ Required properties: - regulators: list of regulators provided by this controller, must have property "regulator-compatible" to match their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc +- sm0-supply: The input supply for the SM0. +- sm1-supply: The input supply for the SM1. +- sm2-supply: The input supply for the SM2. +- vinldo01-supply: The input supply for the LDO1 and LDO2 +- vinldo23-supply: The input supply for the LDO2 and LDO3 +- vinldo4-supply: The input supply for the LDO4 +- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 +- vinldo9-supply: The input supply for the LDO9 Each regulator is defined using the standard binding for regulators. @@ -22,6 +30,15 @@ Example: #gpio-cells = <2>; gpio-controller; + sm0-supply = <&some_reg>; + sm1-supply = <&some_reg>; + sm2-supply = <&some_reg>; + vinldo01-supply = <...>; + vinldo23-supply = <...>; + vinldo4-supply = <...>; + vinldo678-supply = <...>; + vinldo9-supply = <...>; + regulators { #address-cells = <1>; #size-cells = <0>; diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index c0ac2418d6ab..e6da90ab5153 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -70,7 +70,7 @@ struct tps6586x_regulator { static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev) { - return rdev_get_dev(rdev)->parent->parent; + return rdev_get_dev(rdev)->parent; } static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, @@ -191,9 +191,10 @@ static const unsigned int tps6586x_dvm_voltages[] = { 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000, }; -#define TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \ +#define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ .desc = { \ + .supply_name = _pin_name, \ .name = "REG-" #_id, \ .ops = &tps6586x_regulator_ops, \ .type = REGULATOR_VOLTAGE, \ @@ -214,37 +215,39 @@ static const unsigned int tps6586x_dvm_voltages[] = { .go_reg = TPS6586X_##goreg, \ .go_bit = (gobit), -#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \ +#define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ { \ - TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \ + TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ } -#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \ +#define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ { \ - TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \ + TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ } static struct tps6586x_regulator tps6586x_regulator[] = { - TPS6586X_LDO(LDO_0, ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), - TPS6586X_LDO(LDO_3, ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), - TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), - TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), - TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), - TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), - TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), - TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), - TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), - TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), - - TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6), - TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6), - TPS6586X_DVM(SM_0, dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), - TPS6586X_DVM(SM_1, dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), + TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0), + TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2), + TPS6586X_LDO(LDO_5, NULL, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6), + TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4), + TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5), + TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6), + TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7), + TPS6586X_LDO(LDO_RTC, NULL, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7), + TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1), + TPS6586X_LDO(SM_2, "sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), + + TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, + ENB, 3, VCC2, 6), + TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, + END, 3, VCC1, 6), + TPS6586X_DVM(SM_0, "sm0", dvm, SM0V1, 0, 5, ENA, 1, ENB, 1, VCC1, 2), + TPS6586X_DVM(SM_1, "sm1", dvm, SM1V1, 0, 5, ENA, 0, ENB, 0, VCC1, 0), }; /* @@ -351,7 +354,7 @@ static int __devinit tps6586x_regulator_probe(struct platform_device *pdev) if (err) return err; - config.dev = &pdev->dev; + config.dev = pdev->dev.parent; config.of_node = pdev->dev.of_node; config.init_data = pdev->dev.platform_data; config.driver_data = ri; -- cgit v1.2.3 From d2cfdb055d77f8d0864d75adfc1a3f0e0ec40e69 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 17 Jul 2012 11:34:06 +0530 Subject: regulator: tps65910: set input_supply on desc unconditionally Set the supply_name in the regulator descriptor unconditionally and make this parameter as required parameter in the device node for successfully registration of the regulator. Signed-off-by: Laxman Dewangan Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/mfd/tps65910.txt | 33 ++++++++++++++-------- drivers/regulator/tps65910-regulator.c | 11 +------- include/linux/mfd/tps65910.h | 2 -- 3 files changed, 23 insertions(+), 23 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 31be5a3d9f76..d2802d4717bc 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -25,17 +25,12 @@ Required properties: tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8 -Optional properties: -- ti,vmbch-threshold: (tps65911) main battery charged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,vmbch2-threshold: (tps65911) main battery discharged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,en-gpio-sleep: enable sleep control for gpios - There should be 9 entries here, one for each gpio. - xxx-supply: Input voltage supply regulator. - Missing of these properties will be assume as there is no supply regulator - for that input pins and always powered on. - The valid input supply properties are: + These entries are require if regulators are enabled for a device. Missing of these + properties can cause the regulator registration fails. + If some of input supply is powered through battery or always-on supply then + also it is require to have these parameters with proper node handle of always + on power supply. tps65910: vcc1-supply: VDD1 input. vcc2-supply: VDD2 input. @@ -55,6 +50,16 @@ Optional properties: vcc7-supply: VRTC input. vccio-supply: VIO input. +Optional properties: +- ti,vmbch-threshold: (tps65911) main battery charged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,vmbch2-threshold: (tps65911) main battery discharged threshold + comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL + in TPS6591X datasheet) +- ti,en-gpio-sleep: enable sleep control for gpios + There should be 9 entries here, one for each gpio. + Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] @@ -79,8 +84,14 @@ Example: ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; - vcc7-supply = <®_parent>; vcc1-supply = <®_parent>; + vcc2-supply = <&some_reg>; + vcc3-supply = <...>; + vcc4-supply = <...>; + vcc5-supply = <...>; + vcc6-supply = <...>; + vcc7-supply = <...>; + vccio-supply = <...>; regulators { #address-cells = <1>; diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index d2ba066c0957..793adda560c3 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -1001,9 +1001,6 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( *tps65910_reg_matches = matches; for (idx = 0; idx < count; idx++) { - struct tps_info *info = matches[idx].driver_data; - char in_supply[32]; /* 32 is max size of property name */ - if (!matches[idx].init_data || !matches[idx].of_node) continue; @@ -1015,12 +1012,6 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( if (!ret) pmic_plat_data->regulator_ext_sleep_control[idx] = prop; - if (info->vin_name) { - snprintf(in_supply, 32, "%s-supply", info->vin_name); - if (of_find_property(np, in_supply, 0)) - pmic_plat_data->input_supply[idx] = - info->vin_name; - } } return pmic_plat_data; @@ -1123,7 +1114,7 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->info[i] = info; pmic->desc[i].name = info->name; - pmic->desc[i].supply_name = pmic_plat_data->input_supply[i]; + pmic->desc[i].supply_name = info->vin_name; pmic->desc[i].id = i; pmic->desc[i].n_voltages = info->n_voltages; pmic->desc[i].enable_time = info->enable_time_us; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 1aca1fbbc138..6c4c478e21a4 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -799,7 +799,6 @@ struct tps65910_sleep_keepon_data { /** * struct tps65910_board * Board platform data may be used to initialize regulators. - * @input_supply: Name of input supply regulator. */ struct tps65910_board { @@ -812,7 +811,6 @@ struct tps65910_board { struct tps65910_sleep_keepon_data *slp_keepon; bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO]; unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS]; - const char *input_supply[TPS65910_NUM_REGS]; struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS]; }; -- cgit v1.2.3