summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Merge branch 'topic/asoc' into for-linusTakashi Iwai335-15856/+30427
Conflicts: arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-24ALSA: usb - Creative USB X-Fi volume knob supportMandar Joshi1-0/+1
Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. The action of the volume knob is received by lirc when its using the alsa_usb driver. Signed-off-by: Mandar Joshi <emailmandar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23Merge branch 'for-2.6.37' of ↵Takashi Iwai10-34/+54
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2010-10-23ALSA: ca0106: Use card specific dac id for mute controls.Andy Owen1-22/+69
Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.Andy Owen3-14/+21
Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ALSA: ca0106: Create a nice spot for mapping channels to dacs.Andy Owen1-11/+29
This is to allow a future patch to have card specific mappings between dacs, which is required since the Sound Blaster 5.1vx seems to have a different mapping to what was previously used. Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.Andy Owen1-1/+4
Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ALSA: ca0106: Pull out dac powering routine into separate function.Andy Owen1-12/+27
This is ground work for a future commit where cards (such as the Sound Blaster 5.1vx) have different mappings between dacs and channels. Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ALSA: ca0106 - add Sound Blaster 5.1vx info.Andy Owen1-0/+10
Signed-off-by: Andy Owen <andy-alsa@ultra-premium.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-23ASoC: tlv320dac33: Use usleep_range for delaysPeter Ujfalusi1-4/+6
Switch to use the more precise usleep_range instead of msleep(). Replace the udelay with usleep_range to remove the busy loop waiting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-22ALSA: usb-audio: add Novation Launchpad supportClemens Ladisch4-6/+16
Add a quirk entry for the Novation Launchpad USB MIDI controller. QUIRK_MIDI_FASTLANE gets renamed to *_RAW_BYTES because this quirk type is now shared by different devices. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Jakob Flierl <jakob.flierl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-21ASoC: tpa6130a2: Error handling for broken chipPeter Ujfalusi1-6/+22
Correct/Implement handling of broken chip. Fail the i2c_prope if the communication with the chip fails. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-21ASoC: max98088: Staticise m98088_eq_bandDimitris Papastamos1-1/+1
This function is not exported and it does not seem to be called from anywhere else therefore it should be static. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-21ASoC: soc-core: Fix codec->name memory leakDimitris Papastamos1-0/+1
Ensure that the codec->name is freed when unregistering the codec. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-20Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-16/+123
2010-10-20ALSA: snd-aloop - add pause supportJaroslav Kysela1-5/+22
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-20ALSA: snd-aloop - fix locking issues (running flag updates)Jaroslav Kysela1-13/+19
On SMP machines, the cable->running update must be atomic, otherwise stream is not started correctly sometimes. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-19ASoC: WM8580: Remove useless assignmentJassi Brar1-4/+0
The variable is not used anyway. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-19ASoC: Fix I2C component device id number creationJarkko Nikula1-1/+1
Use bitwise AND instead of logical AND when masking. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ASoC: Restore MAX98088 CODEC driverMark Brown4-0/+2296
This reverts commit f6765502f8daae3d237a394889276c8987f3e299 and adds the missing include file. Signed-off-by: Peter Hsiang <Peter.Hsiang@maxim-ic.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ASoC: davinci-mcasp.c: Return error code in failureJulia Lawall1-0/+2
In this code, 0 is returned on failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @a@ identifier alloc; identifier ret; constant C; expression x; @@ x = alloc(...); if (x == NULL) { <+... \(ret = -C; \| return -C; \) ...+> } @@ identifier f, a.alloc; expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = alloc(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-18ALSA: snd-aloop: add cable#0 and cable#1 files to proc card treeJaroslav Kysela1-0/+84
Show some useful runtime information using procfs. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-18Revert "ASoC: Add max98088 CODEC driver"Mark Brown4-2296/+0
This reverts commit e65d255a5a610ce9e185e0df855250706aca7c21 since it does not build.
2010-10-17Merge branch 'fix/misc' into topic/miscTakashi Iwai2-1/+5
2010-10-17Merge remote branch 'alsa/devel' into topic/miscTakashi Iwai1-1/+7
2010-10-17ALSA: rawmidi: fix oops (use after free) when unloading a driver moduleClemens Ladisch1-1/+3
When a driver module is unloaded and the last still open file is a raw MIDI device, the card and its devices will be actually freed in the snd_card_file_remove() call when that file is closed. Afterwards, rmidi and rmidi->card point into freed memory, so the module pointer is likely to be garbage. (This was introduced by commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a.) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Krzysztof Foltman <wdev@foltman.com> Cc: 2.6.30-2.6.35 <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-17sound: fixed typosAndrea Gelmini5-6/+6
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-15ASoC: Add max98088 CODEC driverPeter Hsiang4-0/+2296
This patch adds the MAX98088 CODEC driver. Signed-off-by: Peter Hsiang <peter.hsiang@maxim-ic.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: ep93xx: add Simplemachines Sim.One AC97 audio supportMika Westerberg3-0/+100
Add AC97 audio support for Simplemachines Sim.One board. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: add ep93xx AC97 audio driverMika Westerberg3-1/+476
Add support for AC97 controllers found in Cirrus Logic EP93xx family SoCs. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: ak4642: make sure name of register/valueKuninori Morimoto1-18/+46
This patch replace magic code with defined name, and remove unnecessary settings which set default value Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: Remove unused vol field from WM8994 access mask tableJoe Perches1-1574/+1573
Remove unused vol from struct access_mask Reduces object size ~3kb. $ size sound/soc/codecs/wm8994.o* text data bss dec hex filename 40727 4384 4480 49591 c1b7 sound/soc/codecs/wm8994.o.new 43879 4384 4480 52743 ce07 sound/soc/codecs/wm8994.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: fsi: simultaneous playback/recorde supportKuninori Morimoto1-58/+94
Current FSI driver had not cared about simultaneous playback/capture on same port. This patch add new fsi_stream struct to care it, Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: SAMSUNG: Add Machine driver for S/PDIF PCM audioSeungwhan Youn3-0/+232
This patch add S/PDIF machine driver to support S/PDIF PCM audio on SMDKC100, SMDKC110 and SMDKV210 boards. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-15ASoC: SAMSUNG: Add S/PDIF CPU driverSeungwhan Youn4-0/+526
This patch adds S/PDIF CPU driver for various Samsung SoCs. Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-14ALSA: snd-aloop - fix issue in the timer start functionJaroslav Kysela1-1/+7
In some circumstances (the rate shift value was changed), the irq_pos value may be higher than the fraction value in the timer start function. Check for it. Also, to avoid value overflow, decrease maximum period size. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-10-13ASoC: tlv320dac33: Control for line output gainPeter Ujfalusi1-0/+18
New control to select the line output gain. This gain control affects the linein-to-lineout and dac-to-loneout gain differently. Use enum type to select the desired gain combination. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Pay attention to driver supplied DAI IDsMark Brown1-1/+4
The driver can specify a DAI ID number so use that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Check list debugfs files for PAGE_SIZE overflowMark Brown1-15/+34
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Move soc-core module init next to functon definitionMark Brown1-2/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Restore DAI ID specification for WM8994Mark Brown1-0/+3
WM8994 relies on the DAIs having IDs that match the AIF numbers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: Add WM8962 microphone bias controlMark Brown1-0/+2
We unconditionally require SYSCLK since while only microphone detection specifically requires SYSCLK any actual use case would enable it via some other means but microphone detection may have nothing active other than the bias itself. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-13ASoC: ac97: add MODULE_ALIAS for the platform driverMika Westerberg1-0/+1
So that modprobe can load the driver automatically when the platform device appears. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-13ASoC: don't register AC97 devices twiceMika Westerberg1-0/+18
With generic AC97 ASoC glue driver (codec/ac97.c), we get following warning when the device is registered (slightly stripped the backtrace): kobject (c5a863e8): tried to init an initialized object, something is seriously wrong. [<c00254fc>] (unwind_backtrace+0x0/0xec) [<c014fad0>] (kobject_init+0x38/0x70) [<c0171e94>] (device_initialize+0x20/0x70) [<c017267c>] (device_register+0xc/0x18) [<bf20db70>] (snd_soc_instantiate_cards+0x924/0xacc [snd_soc_core]) [<bf20e0d0>] (snd_soc_register_platform+0x16c/0x198 [snd_soc_core]) [<c0175304>] (platform_drv_probe+0x18/0x1c) [<c0174454>] (driver_probe_device+0xb0/0x16c) [<c017456c>] (__driver_attach+0x5c/0x7c) [<c0173cec>] (bus_for_each_dev+0x48/0x78) [<c0173600>] (bus_add_driver+0x98/0x214) [<c0174834>] (driver_register+0xa4/0x130) [<c001f410>] (do_one_initcall+0xd0/0x1a4) [<c0062ddc>] (sys_init_module+0x12b0/0x1454) This happens because the generic AC97 glue driver creates its codec->ac97 via calling snd_ac97_mixer(). snd_ac97_mixer() provides own version of snd_device.register which handles the device registration when snd_card_register() is called. To avoid registering the AC97 device twice, we add a new flag to the snd_soc_codec: ac97_created which tells whether the AC97 device was created by SoC subsystem. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-13ASoC: ac97: don't call snd_soc_new_ac97_codec at probeMika Westerberg1-6/+0
It is not needed since snd_ac97_mixer() will create a new ac97 object for us. Removing the call also fixes a memory leak since codec->ac97 is set to NULL at the beginning of snd_ac97_mixer(). Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: Add fsi_is_play functionKuninori Morimoto1-4/+9
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: Add new macro and shift for PortA/B In/OutKuninori Morimoto1-23/+22
Some FSI register have similar bit array for PortA/B and In/Out. This patch add new macro and shift for it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: avoid un-necessary status readKuninori Morimoto1-2/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: remove un-necessary variable from fsi_dai_startupKuninori Morimoto1-2/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-12ASoC: fsi: Add fsi_get_frame_width functionKuninori Morimoto1-1/+9
It is not so important for now. But will be used in future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 08:37:04 +0000